drm/bridge: nwl-dsi: Get MIPI DSI controller and PHY ready in ->mode_set()
Some MIPI DSI panel drivers like 'raydium,rm68200' send
MIPI_DCS_SET_DISPLAY_ON commands in panel_funcs->prepare(), which
requires the MIPI DSI controller and PHY to be ready beforehand.
Without this patch, the nwl-dsi driver gets the MIPI DSI controller
and PHY ready in bridge_funcs->atomic_pre_enable(), which happens after
the panel_funcs->prepare(). So, this patch shifts the bridge operation
ealier from bridge_funcs->atomic_pre_enable() to bridge_funcs->mode_set().
This way, more MIPI DSI panels can connect to this nwl-dsi bridge.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1619170003-4817-4-git-send-email-victor.liu@nxp.com
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 601ccc4..873995f 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -662,7 +662,7 @@ static irqreturn_t nwl_dsi_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static int nwl_dsi_enable(struct nwl_dsi *dsi)
+static int nwl_dsi_mode_set(struct nwl_dsi *dsi)
{
struct device *dev = dsi->dev;
union phy_configure_opts *phy_cfg = &dsi->phy_cfg;
@@ -834,7 +834,12 @@ static int nwl_dsi_bridge_atomic_check(struct drm_bridge *bridge,
adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
- /* Do a full modeset if crtc_state->active is changed to be true. */
+ /*
+ * Do a full modeset if crtc_state->active is changed to be true.
+ * This ensures our ->mode_set() is called to get the DSI controller
+ * and the PHY ready to send DCS commands, when only the connector's
+ * DPMS is brought out of "Off" status.
+ */
if (crtc_state->active_changed && crtc_state->active)
crtc_state->mode_changed = true;
@@ -863,16 +868,8 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
memcpy(&dsi->mode, adjusted_mode, sizeof(dsi->mode));
drm_mode_debug_printmodeline(adjusted_mode);
-}
-static void
-nwl_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
- struct drm_bridge_state *old_bridge_state)
-{
- struct nwl_dsi *dsi = bridge_to_dsi(bridge);
- int ret;
-
- pm_runtime_get_sync(dsi->dev);
+ pm_runtime_get_sync(dev);
if (clk_prepare_enable(dsi->lcdif_clk) < 0)
return;
@@ -882,22 +879,22 @@ nwl_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
/* Step 1 from DSI reset-out instructions */
ret = reset_control_deassert(dsi->rst_pclk);
if (ret < 0) {
- DRM_DEV_ERROR(dsi->dev, "Failed to deassert PCLK: %d\n", ret);
+ DRM_DEV_ERROR(dev, "Failed to deassert PCLK: %d\n", ret);
return;
}
/* Step 2 from DSI reset-out instructions */
- nwl_dsi_enable(dsi);
+ nwl_dsi_mode_set(dsi);
/* Step 3 from DSI reset-out instructions */
ret = reset_control_deassert(dsi->rst_esc);
if (ret < 0) {
- DRM_DEV_ERROR(dsi->dev, "Failed to deassert ESC: %d\n", ret);
+ DRM_DEV_ERROR(dev, "Failed to deassert ESC: %d\n", ret);
return;
}
ret = reset_control_deassert(dsi->rst_byte);
if (ret < 0) {
- DRM_DEV_ERROR(dsi->dev, "Failed to deassert BYTE: %d\n", ret);
+ DRM_DEV_ERROR(dev, "Failed to deassert BYTE: %d\n", ret);
return;
}
}
@@ -953,7 +950,6 @@ static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = {
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
.atomic_check = nwl_dsi_bridge_atomic_check,
- .atomic_pre_enable = nwl_dsi_bridge_atomic_pre_enable,
.atomic_enable = nwl_dsi_bridge_atomic_enable,
.atomic_disable = nwl_dsi_bridge_atomic_disable,
.mode_set = nwl_dsi_bridge_mode_set,