drm: Update drm_plane_funcs kerneldoc
- Merge the docbook into the kerneldoc comments.
- Spec in detail the precise semantics of the callbacks.
- For consistency in wording and easier review roll out kerneldoc also
for crtc, encoder and connector for the standard hooks they share
with planes.
v2: Suggestions from Thierry.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-8-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com>
diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 4b5de72..79cdc12 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -1279,28 +1279,12 @@
<title>Miscellaneous</title>
<itemizedlist>
<listitem>
- <synopsis>void (*set_property)(struct drm_crtc *crtc,
- struct drm_property *property, uint64_t value);</synopsis>
- <para>
- Set the value of the given CRTC property to
- <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
- for more information about properties.
- </para>
- </listitem>
- <listitem>
<synopsis>void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t start, uint32_t size);</synopsis>
<para>
Apply a gamma table to the device. The operation is optional.
</para>
</listitem>
- <listitem>
- <synopsis>void (*destroy)(struct drm_crtc *crtc);</synopsis>
- <para>
- Destroy the CRTC when not needed anymore. See
- <xref linkend="drm-kms-init"/>.
- </para>
- </listitem>
</itemizedlist>
</sect4>
</sect3>
@@ -1357,52 +1341,6 @@
primary plane with standard capabilities.
</para>
</sect3>
- <sect3>
- <title>Plane Operations</title>
- <itemizedlist>
- <listitem>
- <synopsis>int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);</synopsis>
- <para>
- Enable and configure the plane to use the given CRTC and frame buffer.
- </para>
- <para>
- The source rectangle in frame buffer memory coordinates is given by
- the <parameter>src_x</parameter>, <parameter>src_y</parameter>,
- <parameter>src_w</parameter> and <parameter>src_h</parameter>
- parameters (as 16.16 fixed point values). Devices that don't support
- subpixel plane coordinates can ignore the fractional part.
- </para>
- <para>
- The destination rectangle in CRTC coordinates is given by the
- <parameter>crtc_x</parameter>, <parameter>crtc_y</parameter>,
- <parameter>crtc_w</parameter> and <parameter>crtc_h</parameter>
- parameters (as integer values). Devices scale the source rectangle to
- the destination rectangle. If scaling is not supported, and the source
- rectangle size doesn't match the destination rectangle size, the
- driver must return a -<errorname>EINVAL</errorname> error.
- </para>
- </listitem>
- <listitem>
- <synopsis>int (*disable_plane)(struct drm_plane *plane);</synopsis>
- <para>
- Disable the plane. The DRM core calls this method in response to a
- DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0.
- Disabled planes must not be processed by the CRTC.
- </para>
- </listitem>
- <listitem>
- <synopsis>void (*destroy)(struct drm_plane *plane);</synopsis>
- <para>
- Destroy the plane when not needed anymore. See
- <xref linkend="drm-kms-init"/>.
- </para>
- </listitem>
- </itemizedlist>
- </sect3>
</sect2>
<sect2>
<title>Encoders (struct <structname>drm_encoder</structname>)</title>
@@ -1459,27 +1397,6 @@
encoders they want to use to a CRTC.
</para>
</sect3>
- <sect3>
- <title>Encoder Operations</title>
- <itemizedlist>
- <listitem>
- <synopsis>void (*destroy)(struct drm_encoder *encoder);</synopsis>
- <para>
- Called to destroy the encoder when not needed anymore. See
- <xref linkend="drm-kms-init"/>.
- </para>
- </listitem>
- <listitem>
- <synopsis>void (*set_property)(struct drm_plane *plane,
- struct drm_property *property, uint64_t value);</synopsis>
- <para>
- Set the value of the given plane property to
- <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
- for more information about properties.
- </para>
- </listitem>
- </itemizedlist>
- </sect3>
</sect2>
<sect2>
<title>Connectors (struct <structname>drm_connector</structname>)</title>
@@ -1683,27 +1600,6 @@
connector_status_unknown.
</para>
</sect4>
- <sect4>
- <title>Miscellaneous</title>
- <itemizedlist>
- <listitem>
- <synopsis>void (*set_property)(struct drm_connector *connector,
- struct drm_property *property, uint64_t value);</synopsis>
- <para>
- Set the value of the given connector property to
- <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
- for more information about properties.
- </para>
- </listitem>
- <listitem>
- <synopsis>void (*destroy)(struct drm_connector *connector);</synopsis>
- <para>
- Destroy the connector when not needed anymore. See
- <xref linkend="drm-kms-init"/>.
- </para>
- </listitem>
- </itemizedlist>
- </sect4>
</sect3>
</sect2>
<sect2>
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 7f80fae..1bcfa09 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -322,21 +322,12 @@
* struct drm_crtc_funcs - control CRTCs for a given device
* @save: save CRTC state
* @restore: restore CRTC state
- * @reset: reset CRTC after state has been invalidated (e.g. resume)
* @cursor_set: setup the cursor
* @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set
* @cursor_move: move the cursor
* @gamma_set: specify color ramp for CRTC
- * @destroy: deinit and free object
- * @set_property: called when a property is changed
* @set_config: apply a new CRTC configuration
* @page_flip: initiate a page flip
- * @atomic_duplicate_state: duplicate the atomic state for this CRTC
- * @atomic_destroy_state: destroy an atomic state for this CRTC
- * @atomic_set_property: set a property on an atomic state for this CRTC
- * (do not call directly, use drm_atomic_crtc_set_property())
- * @atomic_get_property: get a property on an atomic state for this CRTC
- * (do not call directly, use drm_atomic_crtc_get_property())
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more connectors (note that the name
@@ -352,7 +343,17 @@
void (*save)(struct drm_crtc *crtc); /* suspend? */
/* Restore CRTC state */
void (*restore)(struct drm_crtc *crtc); /* resume? */
- /* Reset CRTC state */
+
+ /**
+ * @reset:
+ *
+ * Reset CRTC hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
+ * atomic state using this hook.
+ */
void (*reset)(struct drm_crtc *crtc);
/* cursor controls */
@@ -366,7 +367,14 @@
/* Set gamma on the CRTC */
void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t start, uint32_t size);
- /* Object destroy routine */
+
+ /**
+ * @destroy:
+ *
+ * Clean up plane resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
+ * in DRM.
+ */
void (*destroy)(struct drm_crtc *crtc);
int (*set_config)(struct drm_mode_set *set);
@@ -385,17 +393,129 @@
struct drm_pending_vblank_event *event,
uint32_t flags);
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * CRTC.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_crtc_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*set_property)(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val);
- /* atomic update handling */
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this CRTC and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_crtc should use
+ * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before crtc->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
void (*atomic_destroy_state)(struct drm_crtc *crtc,
struct drm_crtc_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_crtc_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which should never happen, the core only
+ * asks for properties attached to this CRTC). No other validation is
+ * allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
int (*atomic_set_property)(struct drm_crtc *crtc,
struct drm_crtc_state *state,
struct drm_property *property,
uint64_t val);
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETCRTC ioctl.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_crtc_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which should never happen, the core only asks for
+ * properties attached to this CRTC).
+ */
int (*atomic_get_property)(struct drm_crtc *crtc,
const struct drm_crtc_state *state,
struct drm_property *property,
@@ -507,18 +627,9 @@
* @dpms: set power state
* @save: save connector state
* @restore: restore connector state
- * @reset: reset connector after state has been invalidated (e.g. resume)
* @detect: is this connector active?
* @fill_modes: fill mode list for this connector
- * @set_property: property for this connector may need an update
- * @destroy: make object go away
* @force: notify the driver that the connector is forced on
- * @atomic_duplicate_state: duplicate the atomic state for this connector
- * @atomic_destroy_state: destroy an atomic state for this connector
- * @atomic_set_property: set a property on an atomic state for this connector
- * (do not call directly, use drm_atomic_connector_set_property())
- * @atomic_get_property: get a property on an atomic state for this connector
- * (do not call directly, use drm_atomic_connector_get_property())
*
* Each CRTC may have one or more connectors attached to it. The functions
* below allow the core DRM code to control connectors, enumerate available modes,
@@ -528,6 +639,17 @@
int (*dpms)(struct drm_connector *connector, int mode);
void (*save)(struct drm_connector *connector);
void (*restore)(struct drm_connector *connector);
+
+ /**
+ * @reset:
+ *
+ * Reset connector hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
+ * atomic state using this hook.
+ */
void (*reset)(struct drm_connector *connector);
/* Check to see if anything is attached to the connector.
@@ -539,19 +661,142 @@
enum drm_connector_status (*detect)(struct drm_connector *connector,
bool force);
int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * connector.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_connector_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
+
+ /**
+ * @destroy:
+ *
+ * Clean up connector resources. This is called at driver unload time
+ * through drm_mode_config_cleanup(). It can also be called at runtime
+ * when a connector is being hot-unplugged for drivers that support
+ * connector hotplugging (e.g. DisplayPort MST).
+ */
void (*destroy)(struct drm_connector *connector);
void (*force)(struct drm_connector *connector);
- /* atomic update handling */
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this connector and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_connector_state should use
+ * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before connector->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
void (*atomic_destroy_state)(struct drm_connector *connector,
struct drm_connector_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this connector). No other validation
+ * is allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
int (*atomic_set_property)(struct drm_connector *connector,
struct drm_connector_state *state,
struct drm_property *property,
uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETCONNECTOR ioctl.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which shouldn't ever happen, the core only asks for
+ * properties attached to this connector).
+ */
int (*atomic_get_property)(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property,
@@ -560,13 +805,26 @@
/**
* struct drm_encoder_funcs - encoder controls
- * @reset: reset state (e.g. at init or resume time)
- * @destroy: cleanup and free associated data
*
* Encoders sit between CRTCs and connectors.
*/
struct drm_encoder_funcs {
+ /**
+ * @reset:
+ *
+ * Reset encoder hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ */
void (*reset)(struct drm_encoder *encoder);
+
+ /**
+ * @destroy:
+ *
+ * Clean up encoder resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since an encoder cannot be
+ * hotplugged in DRM.
+ */
void (*destroy)(struct drm_encoder *encoder);
};
@@ -787,40 +1045,203 @@
/**
* struct drm_plane_funcs - driver plane control functions
- * @update_plane: update the plane configuration
- * @disable_plane: shut down the plane
- * @destroy: clean up plane resources
- * @reset: reset plane after state has been invalidated (e.g. resume)
- * @set_property: called when a property is changed
- * @atomic_duplicate_state: duplicate the atomic state for this plane
- * @atomic_destroy_state: destroy an atomic state for this plane
- * @atomic_set_property: set a property on an atomic state for this plane
- * (do not call directly, use drm_atomic_plane_set_property())
- * @atomic_get_property: get a property on an atomic state for this plane
- * (do not call directly, use drm_atomic_plane_get_property())
*/
struct drm_plane_funcs {
+ /**
+ * @update_plane:
+ *
+ * This is the legacy entry point to enable and configure the plane for
+ * the given CRTC and framebuffer. It is never called to disable the
+ * plane, i.e. the passed-in crtc and fb paramters are never NULL.
+ *
+ * The source rectangle in frame buffer memory coordinates is given by
+ * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
+ * values). Devices that don't support subpixel plane coordinates can
+ * ignore the fractional part.
+ *
+ * The destination rectangle in CRTC coordinates is given by the
+ * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
+ * Devices scale the source rectangle to the destination rectangle. If
+ * scaling is not supported, and the source rectangle size doesn't match
+ * the destination rectangle size, the driver must return a
+ * -<errorname>EINVAL</errorname> error.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_update_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*update_plane)(struct drm_plane *plane,
struct drm_crtc *crtc, struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h);
+
+ /**
+ * @disable_plane:
+ *
+ * This is the legacy entry point to disable the plane. The DRM core
+ * calls this method in response to a DRM_IOCTL_MODE_SETPLANE ioctl call
+ * with the frame buffer ID set to 0. Disabled planes must not be
+ * processed by the CRTC.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_disable_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*disable_plane)(struct drm_plane *plane);
+
+ /**
+ * @destroy:
+ *
+ * Clean up plane resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since a plane cannot be hotplugged
+ * in DRM.
+ */
void (*destroy)(struct drm_plane *plane);
+
+ /**
+ * @reset:
+ *
+ * Reset plane hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
+ * atomic state using this hook.
+ */
void (*reset)(struct drm_plane *plane);
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * plane.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_plane_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*set_property)(struct drm_plane *plane,
struct drm_property *property, uint64_t val);
- /* atomic update handling */
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this plane and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_plane_state should use
+ * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before plane->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
void (*atomic_destroy_state)(struct drm_plane *plane,
struct drm_plane_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this plane). No other validation is
+ * allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
int (*atomic_set_property)(struct drm_plane *plane,
struct drm_plane_state *state,
struct drm_property *property,
uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETPLANE ioctl.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which should never happen, the core only asks for
+ * properties attached to this plane).
+ */
int (*atomic_get_property)(struct drm_plane *plane,
const struct drm_plane_state *state,
struct drm_property *property,
@@ -833,6 +1254,7 @@
DRM_PLANE_TYPE_CURSOR,
};
+
/**
* struct drm_plane - central DRM plane control structure
* @dev: DRM device this plane belongs to
@@ -907,7 +1329,7 @@
* can be aborted for any reason (including on userspace's request to
* just check whether a configuration would be possible). Drivers MUST
* NOT touch any persistent state (hardware or software) or data
- * structures except the passed in adjusted_mode parameter.
+ * structures except the passed in @state parameter.
*
* RETURNS:
*