[SCSI] pm8001: misc code cleanup
Add more data to printk's, add some spaces around arithmetic ops and
improve comments.
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 6e1bdd8..9b44c6f 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2895,7 +2895,8 @@
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SAS_PHY_UP \n"));
+ pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id));
switch (deviceType) {
case SAS_PHY_UNUSED:
@@ -2969,6 +2970,9 @@
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
unsigned long flags;
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
+ " phy id = %d\n", port_id, phy_id));
port->port_state = portstate;
port->port_attached = 1;
get_lrate_mode(phy, link_rate);
@@ -4058,7 +4062,7 @@
struct inbound_queue_table *circularQ;
int ret;
u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
- memset((u8 *)&payload, 0, sizeof(payload));
+ memset(&payload, 0, sizeof(payload));
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = 1;
payload.phyop_phyid =
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index e3d4f38..7f9c83a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -819,7 +819,7 @@
task->task_done = pm8001_task_done;
task->timer.data = (unsigned long)task;
task->timer.function = pm8001_tmf_timedout;
- task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+ task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
add_timer(&task->timer);
res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 599601e..8e38ca8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -59,11 +59,11 @@
#define DRV_NAME "pm8001"
#define DRV_VERSION "0.1.36"
-#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */
+#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
#define PM8001_IO_LOGGING 0x08 /* I/O path logging */
-#define PM8001_EH_LOGGING 0x10 /* Error message logging */
+#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
#define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\