Merge tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family, replacing
Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs a slightly
complex fix, as well as another bug with error handling.
- Several minor issues for the OMAP platform, including a regression
with the timer
- A Kconfig change to fix a build-time issue on Intel SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on am1-odroid, a
spurious interrupt, and a problem with reserved memory regions
- In the i.MX platform, several bug fixes are needed to make devices
work correctly: SD card detection, alarmtimer, and sound card on
some board. One patch for the GPU got in there by accident and gets
reverted again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on the Skomer phone"
* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
arm64: Remove ARCH_VULCAN
MAINTAINERS: add myself as a maintainer for the sl28cpld
MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
MAINTAINERS: arm: samsung: add Git tree and IRC
ARM: dts: Fix boot regression on Skomer
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
docs/ABI: testing: aspeed-uart-routing: Escape asterisk
MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
MAINTAINERS: Update Benjamin Gaignard maintainer status
ARM: socfpga: fix missing RESET_CONTROLLER
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
optee: use driver internal tee_context for some rpc
...
diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
index b363827..910df0e 100644
--- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
+++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
@@ -1,4 +1,4 @@
-What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
+What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
Date: September 2021
Contact: Oskar Senft <osk@google.com>
Chia-Wei Wang <chiawei_wang@aspeedtech.com>
@@ -9,7 +9,7 @@
depends on the selected file.
e.g.
- cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
+ cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
[io1] io2 io3 io4 uart2 uart3 uart4 io6
In this case, UART1 gets its input from IO1 (physical serial port 1).
@@ -17,7 +17,7 @@
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
-What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io*
+What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
Date: September 2021
Contact: Oskar Senft <osk@google.com>
Chia-Wei Wang <chiawei_wang@aspeedtech.com>
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c..fa8b316 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@
- OMAP3 BeagleBoard : Low cost community board
compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+ compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
diff --git a/MAINTAINERS b/MAINTAINERS
index 35210f0..d164cc3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1620,6 +1620,7 @@
M: soc@kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+C: irc://irc.libera.chat/armlinux
T: git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
F: arch/arm/boot/dts/Makefile
F: arch/arm64/boot/dts/Makefile
@@ -1627,6 +1628,7 @@
ARM SUB-ARCHITECTURES
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+C: irc://irc.libera.chat/armlinux
T: git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
F: arch/arm/mach-*/
F: arch/arm/plat-*/
@@ -1780,6 +1782,7 @@
F: drivers/mailbox/apple-mailbox.c
F: drivers/pinctrl/pinctrl-apple-gpio.c
F: drivers/soc/apple/*
+F: drivers/watchdog/apple_wdt.c
F: include/dt-bindings/interrupt-controller/apple-aic.h
F: include/dt-bindings/pinctrl/apple.h
F: include/linux/apple-mailbox.h
@@ -2570,10 +2573,13 @@
ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+R: Alim Akhtar <alim.akhtar@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
+C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
F: Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -5772,7 +5778,7 @@
DMA-BUF HEAPS FRAMEWORK
M: Sumit Semwal <sumit.semwal@linaro.org>
-R: Benjamin Gaignard <benjamin.gaignard@linaro.org>
+R: Benjamin Gaignard <benjamin.gaignard@collabora.com>
R: Liam Mark <lmark@codeaurora.org>
R: Laura Abbott <labbott@redhat.com>
R: Brian Starkey <Brian.Starkey@arm.com>
@@ -6502,7 +6508,7 @@
F: drivers/gpu/drm/rockchip/
DRM DRIVERS FOR STI
-M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
+M: Alain Volmat <alain.volmat@foss.st.com>
L: dri-devel@lists.freedesktop.org
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
@@ -6511,8 +6517,8 @@
DRM DRIVERS FOR STM
M: Yannick Fertre <yannick.fertre@foss.st.com>
+M: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
M: Philippe Cornu <philippe.cornu@foss.st.com>
-M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
L: dri-devel@lists.freedesktop.org
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
@@ -14395,6 +14401,7 @@
M: Frank Rowand <frowand.list@gmail.com>
L: devicetree@vger.kernel.org
S: Maintained
+C: irc://irc.libera.chat/devicetree
W: http://www.devicetree.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
F: Documentation/ABI/testing/sysfs-firmware-ofw
@@ -14406,6 +14413,7 @@
M: Rob Herring <robh+dt@kernel.org>
L: devicetree@vger.kernel.org
S: Maintained
+C: irc://irc.libera.chat/devicetree
Q: http://patchwork.ozlabs.org/project/devicetree-bindings/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
F: Documentation/devicetree/
@@ -15296,9 +15304,11 @@
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
+R: Alim Akhtar <alim.akhtar@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
+C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -17095,6 +17105,7 @@
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
+R: Alim Akhtar <alim.akhtar@samsung.com>
L: linux-samsung-soc@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
@@ -17731,6 +17742,21 @@
W: http://www.winischhofer.at/linuxsisusbvga.shtml
F: drivers/usb/misc/sisusbvga/
+SL28 CPLD MFD DRIVER
+M: Michael Walle <michael@walle.cc>
+S: Maintained
+F: Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
+F: Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
+F: Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
+F: Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
+F: Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
+F: Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
+F: drivers/gpio/gpio-sl28cpld.c
+F: drivers/hwmon/sl28cpld-hwmon.c
+F: drivers/irqchip/irq-sl28cpld.c
+F: drivers/pwm/pwm-sl28cpld.c
+F: drivers/watchdog/sl28cpld_wdt.c
+
SLAB ALLOCATOR
M: Christoph Lameter <cl@linux.com>
M: Pekka Enberg <penberg@kernel.org>
@@ -18447,7 +18473,7 @@
F: sound/soc/sti/
STI CEC DRIVER
-M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
+M: Alain Volmat <alain.volmat@foss.st.com>
S: Maintained
F: Documentation/devicetree/bindings/media/stih-cec.txt
F: drivers/media/cec/platform/sti/
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad55..e41eca7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,6 +806,7 @@
logicpd-som-lv-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
+ omap3-beagle-ab4.dtb \
omap3-beagle-xm.dtb \
omap3-beagle-xm-ab.dtb \
omap3-cm-t3517.dtb \
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 673159d..f957fea 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -55,7 +55,7 @@ &mcasp0 {
2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
>;
tx-num-evt = <16>;
- rt-num-evt = <16>;
+ rx-num-evt = <16>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 6b485cb..42bff11 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -160,7 +160,7 @@ l4_per1: interconnect@48000000 {
target-module@48210000 {
compatible = "ti,sysc-omap4-simple", "ti,sysc";
power-domains = <&prm_mpu>;
- clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+ clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
@@ -875,10 +875,10 @@ target-module@58000000 {
<0x58000014 4>;
reg-names = "rev", "syss";
ti,syss-mask = <1>;
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
#address-cells = <1>;
#size-cells = <1>;
@@ -912,7 +912,7 @@ SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,syss-mask = <1>;
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
@@ -939,8 +939,8 @@ target-module@40000 {
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
clock-names = "fck", "dss_clk";
#address-cells = <1>;
#size-cells = <1>;
@@ -979,7 +979,7 @@ bb2d: gpu@0 {
compatible = "vivante,gc";
reg = <0x0 0x700>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+ clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
clock-names = "core";
};
};
@@ -1333,7 +1333,7 @@ &timer1_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+ assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
assigned-clock-parents = <&sys_32k_ck>;
};
};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81..3b609d9 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@ hog_pins_a: hog@0 {
MX23_PAD_LCD_RESET__GPIO_1_18
MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30
- MX23_PAD_SSP1_DETECT__SSP1_DETECT
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f8..ccfa8e3 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
aliases {
backlight = &backlight;
@@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
>;
};
@@ -304,7 +307,7 @@ &usbotg {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- non-removable;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37a..bcec98b 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@ wdog1: watchdog@403d0000 {
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
- assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+ assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
timeout-sec = <40>;
};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 3be7cba..26eaba3 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@ hwrng: rng@8100 {
};
uart_A: serial@84c0 {
- compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart";
reg = <0x84c0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
fifo-size = <128>;
@@ -67,7 +67,7 @@ uart_A: serial@84c0 {
};
uart_B: serial@84dc {
- compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart";
reg = <0x84dc 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -105,7 +105,7 @@ saradc: adc@8680 {
};
uart_C: serial@8700 {
- compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart";
reg = <0x8700 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -228,7 +228,7 @@ ir_receiver: ir-receiver@480 {
};
uart_AO: serial@4c0 {
- compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
reg = <0x4c0 0x18>;
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index f80ddc9..9997a5d 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@ &timer_abcde {
};
&uart_AO {
- compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_A {
- compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_B {
- compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_C {
- compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&usb0 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index b49b7cb..94f1c03 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@ &timer_abcde {
};
&uart_AO {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_A {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_B {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_C {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&usb0 {
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 0000000..990ff2d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+ model = "TI OMAP3 BeagleBoard A to B4";
+ compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+ status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ /delete-property/ti,timer-alwon;
+ };
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8..0548b39 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@ &usbhsehci {
phys = <0 &hsusb2_phy>;
};
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
- status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
- /delete-property/ti,no-reset-on-init;
- /delete-property/ti,no-idle;
- timer@0 {
- /delete-property/ti,timer-alwon;
- };
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- /* Always clocked by secure_32k_fck */
- };
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&gpt2_fck>;
- assigned-clock-parents = <&sys_ck>;
- };
-};
-
&twl_gpio {
ti,use-leds;
/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48..b587e4e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -235,7 +235,6 @@ stmpe811@41 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
- irq-over-gpio;
irq-gpios = <&gpiopinctrl 29 0x4>;
id = <0>;
blocks = <0x5>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 580ca49..f8c5899f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -185,10 +185,6 @@ mmc@80126000 {
cap-sd-highspeed;
cap-mmc-highspeed;
/* All direction control is used */
- st,sig-dir-cmd;
- st,sig-dir-dat0;
- st,sig-dir-dat2;
- st,sig-dir-dat31;
st,sig-pin-fbclk;
full-pwr-cycle;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6daaa64..21413a9 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
}
r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ put_device(&pdev->dev);
if (r) {
pr_err("Unable to populate DSS submodule devices\n");
- put_device(&pdev->dev);
return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index ccb0e37..31d1a21 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
for_each_matching_node(np, ti_clkctrl_match_table) {
ret = _setup_clkctrl_provider(np);
- if (ret)
+ if (ret) {
+ of_node_put(np);
break;
+ }
}
return ret;
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 43ddec6..594edf9 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
menuconfig ARCH_INTEL_SOCFPGA
bool "Altera SOCFPGA family"
depends on ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
@@ -18,6 +19,7 @@
select PL310_ERRATA_727915
select PL310_ERRATA_753970 if PL310
select PL310_ERRATA_769419
+ select RESET_CONTROLLER
if ARCH_INTEL_SOCFPGA
config SOCFPGA_SUSPEND
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7d5d588..2169744 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -309,9 +309,6 @@
help
This enables support for Toshiba Visconti SoCs Family.
-config ARCH_VULCAN
- def_bool n
-
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 517519e..f84d4b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@ secmon_reserved: secmon@5000000 {
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index d8838dd..4fb31c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 {
regulator-always-on;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b2..fd3fa82 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@ aliases {
rtc1 = &vrtc;
};
- dioo2133: audio-amplifier-0 {
+ dio2133: audio-amplifier-0 {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@ sound {
audio-widgets = "Line", "Lineout";
audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
- <&dioo2133>;
+ <&dio2133>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2..aa14ea0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@ secmon_reserved_alt: secmon@5000000 {
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa..5751c48 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@ vddio_c: regulator-vddio_c {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98..ddb1b34 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_5v>;
- enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
enable-active-high;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 4274758..a5d79f2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 {
regulator-always-on;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738..c03f4e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@ partition@3e0000 {
};
};
+&ftm_alarm0 {
+ status = "okay";
+};
+
&gpio1 {
gpio-line-names =
"", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f3e3418..2d4a472 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1115,8 +1115,8 @@ &mipi_csi1 {
status = "okay";
ports {
- port@1 {
- reg = <1>;
+ port@0 {
+ reg = <0>;
mipi1_sensor_ep: endpoint {
remote-endpoint = <&camera1_ep>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2df2510..e92ebb6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@ lcdif: lcd-controller@30320000 {
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
status = "disabled";
- port@0 {
+ port {
lcdif_mipi_dsi: endpoint {
remote-endpoint = <&mipi_dsi_lcdif_in>;
};
@@ -1151,8 +1151,8 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi1_mipi_ep: endpoint {
remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi2_mipi_ep: endpoint {
remote-endpoint = <&csi2_ep>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index f27e3c8..ce6d5bd 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -91,7 +91,7 @@ reg_vcc_3v3: regulator-3v3 {
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
- model = "tqm-tlv320aic32";
+ model = "imx-audio-tlv320aic32x4";
ssi-controller = <&sai3>;
audio-codec = <&tlv320aic3x04>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9..b210cc0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@ / {
model = "Texas Instruments J721S2 EVM";
chosen {
- stdout-path = "serial10:115200n8";
- bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+ stdout-path = "serial2:115200n8";
+ bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+ };
+
+ aliases {
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart8;
+ mmc0 = &main_sdhci0;
+ mmc1 = &main_sdhci1;
+ can0 = &main_mcan16;
+ can1 = &mcu_mcan0;
+ can2 = &mcu_mcan1;
};
evm_12v0: fixedregulator-evm12v0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae..fe5234c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- serial4 = &main_uart2;
- serial5 = &main_uart3;
- serial6 = &main_uart4;
- serial7 = &main_uart5;
- serial8 = &main_uart6;
- serial9 = &main_uart7;
- serial10 = &main_uart8;
- serial11 = &main_uart9;
- mmc0 = &main_sdhci0;
- mmc1 = &main_sdhci1;
- can0 = &main_mcan16;
- can1 = &mcu_mcan0;
- can2 = &mcu_mcan1;
- can3 = &main_mcan3;
- can4 = &main_mcan5;
- };
-
chosen { };
cpus {
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index b6f9796..5c40ca1 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
bool quirk_unreliable_oscillator = false;
/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
- if (of_machine_is_compatible("ti,omap3-beagle") ||
+ if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
of_machine_is_compatible("timll,omap3-devkit8000")) {
quirk_unreliable_oscillator = true;
counter_32k = -ENODEV;
diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
index 72771e0..258894e 100644
--- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -306,10 +306,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
}
lpc_ctrl->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(lpc_ctrl->clk)) {
- dev_err(dev, "couldn't get clock\n");
- return PTR_ERR(lpc_ctrl->clk);
- }
+ if (IS_ERR(lpc_ctrl->clk))
+ return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+ "couldn't get clock\n");
rc = clk_prepare_enable(lpc_ctrl->clk);
if (rc) {
dev_err(dev, "couldn't enable clock\n");
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index a9f8b22..02e3195 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -31,7 +31,7 @@
help
Enable support for USI block. USI (Universal Serial Interface) is an
IP-core found in modern Samsung Exynos SoCs, like Exynos850 and
- ExynosAutoV0. USI block can be configured to provide one of the
+ ExynosAutoV9. USI block can be configured to provide one of the
following serial protocols: UART, SPI or High Speed I2C.
This driver allows one to configure USI for desired protocol, which
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 1ca3208..17a6f51d 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -158,6 +158,7 @@ void optee_remove_common(struct optee *optee)
optee_unregister_devices();
optee_notif_uninit(optee);
+ teedev_close_context(optee->ctx);
/*
* The two devices have to be unregistered before we can free the
* other resources.
diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
index 20a1b1a..f2bf6c6 100644
--- a/drivers/tee/optee/ffa_abi.c
+++ b/drivers/tee/optee/ffa_abi.c
@@ -424,6 +424,7 @@ static struct tee_shm_pool_mgr *optee_ffa_shm_pool_alloc_pages(void)
*/
static void handle_ffa_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee *optee,
struct optee_msg_arg *arg)
{
struct tee_shm *shm;
@@ -439,7 +440,7 @@ static void handle_ffa_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
shm = optee_rpc_cmd_alloc_suppl(ctx, arg->params[0].u.value.b);
break;
case OPTEE_RPC_SHM_TYPE_KERNEL:
- shm = tee_shm_alloc(ctx, arg->params[0].u.value.b,
+ shm = tee_shm_alloc(optee->ctx, arg->params[0].u.value.b,
TEE_SHM_MAPPED | TEE_SHM_PRIV);
break;
default:
@@ -493,14 +494,13 @@ static void handle_ffa_rpc_func_cmd_shm_free(struct tee_context *ctx,
}
static void handle_ffa_rpc_func_cmd(struct tee_context *ctx,
+ struct optee *optee,
struct optee_msg_arg *arg)
{
- struct optee *optee = tee_get_drvdata(ctx->teedev);
-
arg->ret_origin = TEEC_ORIGIN_COMMS;
switch (arg->cmd) {
case OPTEE_RPC_CMD_SHM_ALLOC:
- handle_ffa_rpc_func_cmd_shm_alloc(ctx, arg);
+ handle_ffa_rpc_func_cmd_shm_alloc(ctx, optee, arg);
break;
case OPTEE_RPC_CMD_SHM_FREE:
handle_ffa_rpc_func_cmd_shm_free(ctx, optee, arg);
@@ -510,12 +510,12 @@ static void handle_ffa_rpc_func_cmd(struct tee_context *ctx,
}
}
-static void optee_handle_ffa_rpc(struct tee_context *ctx, u32 cmd,
- struct optee_msg_arg *arg)
+static void optee_handle_ffa_rpc(struct tee_context *ctx, struct optee *optee,
+ u32 cmd, struct optee_msg_arg *arg)
{
switch (cmd) {
case OPTEE_FFA_YIELDING_CALL_RETURN_RPC_CMD:
- handle_ffa_rpc_func_cmd(ctx, arg);
+ handle_ffa_rpc_func_cmd(ctx, optee, arg);
break;
case OPTEE_FFA_YIELDING_CALL_RETURN_INTERRUPT:
/* Interrupt delivered by now */
@@ -582,7 +582,7 @@ static int optee_ffa_yielding_call(struct tee_context *ctx,
* above.
*/
cond_resched();
- optee_handle_ffa_rpc(ctx, data->data1, rpc_arg);
+ optee_handle_ffa_rpc(ctx, optee, data->data1, rpc_arg);
cmd = OPTEE_FFA_YIELDING_CALL_RESUME;
data->data0 = cmd;
data->data1 = 0;
@@ -619,9 +619,18 @@ static int optee_ffa_do_call_with_arg(struct tee_context *ctx,
.data2 = (u32)(shm->sec_world_id >> 32),
.data3 = shm->offset,
};
- struct optee_msg_arg *arg = tee_shm_get_va(shm, 0);
- unsigned int rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
- struct optee_msg_arg *rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+ struct optee_msg_arg *arg;
+ unsigned int rpc_arg_offs;
+ struct optee_msg_arg *rpc_arg;
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg))
+ return PTR_ERR(arg);
+
+ rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
+ rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+ if (IS_ERR(rpc_arg))
+ return PTR_ERR(rpc_arg);
return optee_ffa_yielding_call(ctx, &data, rpc_arg);
}
@@ -793,7 +802,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
{
const struct ffa_dev_ops *ffa_ops;
unsigned int rpc_arg_count;
+ struct tee_shm_pool *pool;
struct tee_device *teedev;
+ struct tee_context *ctx;
struct optee *optee;
int rc;
@@ -813,12 +824,12 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
if (!optee)
return -ENOMEM;
- optee->pool = optee_ffa_config_dyn_shm();
- if (IS_ERR(optee->pool)) {
- rc = PTR_ERR(optee->pool);
- optee->pool = NULL;
- goto err;
+ pool = optee_ffa_config_dyn_shm();
+ if (IS_ERR(pool)) {
+ rc = PTR_ERR(pool);
+ goto err_free_optee;
}
+ optee->pool = pool;
optee->ops = &optee_ffa_ops;
optee->ffa.ffa_dev = ffa_dev;
@@ -829,7 +840,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
optee);
if (IS_ERR(teedev)) {
rc = PTR_ERR(teedev);
- goto err;
+ goto err_free_pool;
}
optee->teedev = teedev;
@@ -837,50 +848,57 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
optee);
if (IS_ERR(teedev)) {
rc = PTR_ERR(teedev);
- goto err;
+ goto err_unreg_teedev;
}
optee->supp_teedev = teedev;
rc = tee_device_register(optee->teedev);
if (rc)
- goto err;
+ goto err_unreg_supp_teedev;
rc = tee_device_register(optee->supp_teedev);
if (rc)
- goto err;
+ goto err_unreg_supp_teedev;
rc = rhashtable_init(&optee->ffa.global_ids, &shm_rhash_params);
if (rc)
- goto err;
+ goto err_unreg_supp_teedev;
mutex_init(&optee->ffa.mutex);
mutex_init(&optee->call_queue.mutex);
INIT_LIST_HEAD(&optee->call_queue.waiters);
optee_supp_init(&optee->supp);
ffa_dev_set_drvdata(ffa_dev, optee);
+ ctx = teedev_open(optee->teedev);
+ if (IS_ERR(ctx))
+ goto err_rhashtable_free;
+ optee->ctx = ctx;
rc = optee_notif_init(optee, OPTEE_DEFAULT_MAX_NOTIF_VALUE);
- if (rc) {
- optee_ffa_remove(ffa_dev);
- return rc;
- }
+ if (rc)
+ goto err_close_ctx;
rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
- if (rc) {
- optee_ffa_remove(ffa_dev);
- return rc;
- }
+ if (rc)
+ goto err_unregister_devices;
pr_info("initialized driver\n");
return 0;
-err:
- /*
- * tee_device_unregister() is safe to call even if the
- * devices hasn't been registered with
- * tee_device_register() yet.
- */
+
+err_unregister_devices:
+ optee_unregister_devices();
+ optee_notif_uninit(optee);
+err_close_ctx:
+ teedev_close_context(ctx);
+err_rhashtable_free:
+ rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+ optee_supp_uninit(&optee->supp);
+ mutex_destroy(&optee->call_queue.mutex);
+err_unreg_supp_teedev:
tee_device_unregister(optee->supp_teedev);
+err_unreg_teedev:
tee_device_unregister(optee->teedev);
- if (optee->pool)
- tee_shm_pool_free(optee->pool);
+err_free_pool:
+ tee_shm_pool_free(pool);
+err_free_optee:
kfree(optee);
return rc;
}
diff --git a/drivers/tee/optee/notif.c b/drivers/tee/optee/notif.c
index a28fa03..0521284 100644
--- a/drivers/tee/optee/notif.c
+++ b/drivers/tee/optee/notif.c
@@ -121,5 +121,5 @@ int optee_notif_init(struct optee *optee, u_int max_key)
void optee_notif_uninit(struct optee *optee)
{
- kfree(optee->notif.bitmap);
+ bitmap_free(optee->notif.bitmap);
}
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 46f74ab..92bc47b 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -53,7 +53,6 @@ struct optee_call_queue {
struct optee_notif {
u_int max_key;
- struct tee_context *ctx;
/* Serializes access to the elements below in this struct */
spinlock_t lock;
struct list_head db;
@@ -134,9 +133,10 @@ struct optee_ops {
/**
* struct optee - main service struct
* @supp_teedev: supplicant device
+ * @teedev: client device
* @ops: internal callbacks for different ways to reach secure
* world
- * @teedev: client device
+ * @ctx: driver internal TEE context
* @smc: specific to SMC ABI
* @ffa: specific to FF-A ABI
* @call_queue: queue of threads waiting to call @invoke_fn
@@ -152,6 +152,7 @@ struct optee {
struct tee_device *supp_teedev;
struct tee_device *teedev;
const struct optee_ops *ops;
+ struct tee_context *ctx;
union {
struct optee_smc smc;
struct optee_ffa ffa;
diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
index 449d6a7..1a55339 100644
--- a/drivers/tee/optee/smc_abi.c
+++ b/drivers/tee/optee/smc_abi.c
@@ -75,16 +75,6 @@ static int from_msg_param_tmp_mem(struct tee_param *p, u32 attr,
p->u.memref.shm_offs = mp->u.tmem.buf_ptr - pa;
p->u.memref.shm = shm;
- /* Check that the memref is covered by the shm object */
- if (p->u.memref.size) {
- size_t o = p->u.memref.shm_offs +
- p->u.memref.size - 1;
-
- rc = tee_shm_get_pa(shm, o, NULL);
- if (rc)
- return rc;
- }
-
return 0;
}
@@ -622,6 +612,7 @@ static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
}
static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee *optee,
struct optee_msg_arg *arg,
struct optee_call_ctx *call_ctx)
{
@@ -651,7 +642,8 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
shm = optee_rpc_cmd_alloc_suppl(ctx, sz);
break;
case OPTEE_RPC_SHM_TYPE_KERNEL:
- shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV);
+ shm = tee_shm_alloc(optee->ctx, sz,
+ TEE_SHM_MAPPED | TEE_SHM_PRIV);
break;
default:
arg->ret = TEEC_ERROR_BAD_PARAMETERS;
@@ -747,7 +739,7 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
switch (arg->cmd) {
case OPTEE_RPC_CMD_SHM_ALLOC:
free_pages_list(call_ctx);
- handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx);
+ handle_rpc_func_cmd_shm_alloc(ctx, optee, arg, call_ctx);
break;
case OPTEE_RPC_CMD_SHM_FREE:
handle_rpc_func_cmd_shm_free(ctx, arg);
@@ -776,7 +768,7 @@ static void optee_handle_rpc(struct tee_context *ctx,
switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
case OPTEE_SMC_RPC_FUNC_ALLOC:
- shm = tee_shm_alloc(ctx, param->a1,
+ shm = tee_shm_alloc(optee->ctx, param->a1,
TEE_SHM_MAPPED | TEE_SHM_PRIV);
if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
reg_pair_from_64(¶m->a1, ¶m->a2, pa);
@@ -954,57 +946,34 @@ static irqreturn_t notif_irq_thread_fn(int irq, void *dev_id)
{
struct optee *optee = dev_id;
- optee_smc_do_bottom_half(optee->notif.ctx);
+ optee_smc_do_bottom_half(optee->ctx);
return IRQ_HANDLED;
}
static int optee_smc_notif_init_irq(struct optee *optee, u_int irq)
{
- struct tee_context *ctx;
int rc;
- ctx = teedev_open(optee->teedev);
- if (IS_ERR(ctx))
- return PTR_ERR(ctx);
-
- optee->notif.ctx = ctx;
rc = request_threaded_irq(irq, notif_irq_handler,
notif_irq_thread_fn,
0, "optee_notification", optee);
if (rc)
- goto err_close_ctx;
+ return rc;
optee->smc.notif_irq = irq;
return 0;
-
-err_close_ctx:
- teedev_close_context(optee->notif.ctx);
- optee->notif.ctx = NULL;
-
- return rc;
}
static void optee_smc_notif_uninit_irq(struct optee *optee)
{
- if (optee->notif.ctx) {
- optee_smc_stop_async_notif(optee->notif.ctx);
+ if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_ASYNC_NOTIF) {
+ optee_smc_stop_async_notif(optee->ctx);
if (optee->smc.notif_irq) {
free_irq(optee->smc.notif_irq, optee);
irq_dispose_mapping(optee->smc.notif_irq);
}
-
- /*
- * The thread normally working with optee->notif.ctx was
- * stopped with free_irq() above.
- *
- * Note we're not using teedev_close_context() or
- * tee_client_close_context() since we have already called
- * tee_device_put() while initializing to avoid a circular
- * reference counting.
- */
- teedev_close_context(optee->notif.ctx);
}
}
@@ -1366,6 +1335,7 @@ static int optee_probe(struct platform_device *pdev)
struct optee *optee = NULL;
void *memremaped_shm = NULL;
struct tee_device *teedev;
+ struct tee_context *ctx;
u32 max_notif_value;
u32 sec_caps;
int rc;
@@ -1446,9 +1416,13 @@ static int optee_probe(struct platform_device *pdev)
optee->pool = pool;
platform_set_drvdata(pdev, optee);
+ ctx = teedev_open(optee->teedev);
+ if (IS_ERR(ctx))
+ goto err_supp_uninit;
+ optee->ctx = ctx;
rc = optee_notif_init(optee, max_notif_value);
if (rc)
- goto err_supp_uninit;
+ goto err_close_ctx;
if (sec_caps & OPTEE_SMC_SEC_CAP_ASYNC_NOTIF) {
unsigned int irq;
@@ -1496,6 +1470,8 @@ static int optee_probe(struct platform_device *pdev)
optee_unregister_devices();
err_notif_uninit:
optee_notif_uninit(optee);
+err_close_ctx:
+ teedev_close_context(ctx);
err_supp_uninit:
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index 7d57063..29ff6b8 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -84,17 +84,10 @@
#define DRA7_L3_MAIN_2_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
#define DRA7_L3_INSTR_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
-/* iva clocks */
-#define DRA7_IVA_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_SL2IF_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
-
/* dss clocks */
#define DRA7_DSS_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
#define DRA7_BB2D_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
-/* gpu clocks */
-#define DRA7_GPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
-
/* l3init clocks */
#define DRA7_MMC1_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
#define DRA7_MMC2_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
@@ -267,10 +260,17 @@
#define DRA7_L3INSTR_L3_MAIN_2_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
#define DRA7_L3INSTR_L3_INSTR_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+/* iva clocks */
+#define DRA7_IVA_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_SL2IF_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+
/* dss clocks */
#define DRA7_DSS_DSS_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
#define DRA7_DSS_BB2D_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
+/* gpu clocks */
+#define DRA7_GPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
/* l3init clocks */
#define DRA7_L3INIT_MMC1_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
#define DRA7_L3INIT_MMC2_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)