e1000e: keep Rx/Tx HW_VLAN_CTAG in sync
The bit in the e1000 driver that mentions explicitly that the hardware
has no support for separate RX/TX VLAN accel toggling rings true for
e1000e as well, and thus both NETIF_F_HW_VLAN_CTAG_RX and
NETIF_F_HW_VLAN_CTAG_TX need to be kept in sync.
Revert a portion of commit 889ad456660461 ("e1000e: keep VLAN interfaces
functional after rxvlan off") since keeping the bits in sync resolves
the original issue.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 73f7452..2b2e2f8 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -154,16 +154,6 @@
writel(val, hw->hw_addr + reg);
}
-static bool e1000e_vlan_used(struct e1000_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- return true;
-
- return false;
-}
-
/**
* e1000_regdump - register printout routine
* @hw: pointer to the HW structure
@@ -3453,8 +3443,7 @@
ew32(RCTL, rctl);
- if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX ||
- e1000e_vlan_used(adapter))
+ if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
e1000e_vlan_strip_enable(adapter);
else
e1000e_vlan_strip_disable(adapter);
@@ -6926,6 +6915,14 @@
if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
features &= ~NETIF_F_RXFCS;
+ /* Since there is no support for separate Rx/Tx vlan accel
+ * enable/disable make sure Tx flag is always in same state as Rx.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
return features;
}