drm/i915/skl: Only use the 800mV+2bB HDMI translation entry
This translation entry was updated after electrical validation by the hw
team. The other entries are removed from existence as they aren't
validated and because the sole use of a certain type of level shifter
for SKL products is anticipated.
v2: Remove all the other entries and force the use of the 800mv+2dB
config (Sonika)
Suggested-by: Sonika Jindal <sonika.jindal@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 985d531..834820b 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -156,16 +156,7 @@
static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = {
/* Idx NT mV T mV db */
- { 0x00000018, 0x000000a0 }, /* 0: 400 400 0 */
- { 0x00004014, 0x00000098 }, /* 1: 400 600 3.5 */
- { 0x00006012, 0x00000088 }, /* 2: 400 800 6 */
- { 0x00000018, 0x0000003c }, /* 3: 450 450 0 */
- { 0x00000018, 0x00000098 }, /* 4: 600 600 0 */
- { 0x00003015, 0x00000088 }, /* 5: 600 800 2.5 */
- { 0x00005013, 0x00000080 }, /* 6: 600 1000 4.5 */
- { 0x00000018, 0x00000088 }, /* 7: 800 800 0 */
- { 0x00000096, 0x00000080 }, /* 8: 800 1000 2 */
- { 0x00000018, 0x00000080 }, /* 9: 1200 1200 0 */
+ { 0x00004014, 0x00000087 }, /* 0: 800 1000 2 */
};
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
@@ -202,7 +193,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
- int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_800mV_0dB,
+ int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry,
size;
int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
const struct ddi_buf_trans *ddi_translations_fdi;
@@ -223,9 +214,16 @@
n_edp_entries = ARRAY_SIZE(skl_ddi_translations_dp);
}
+ /*
+ * On SKL, the recommendation from the hw team is to always use
+ * a certain type of level shifter (and thus the corresponding
+ * 800mV+2dB entry). Given that's the only validated entry, we
+ * override what is in the VBT, at least until further notice.
+ */
+ hdmi_level = 0;
ddi_translations_hdmi = skl_ddi_translations_hdmi;
n_hdmi_entries = ARRAY_SIZE(skl_ddi_translations_hdmi);
- hdmi_800mV_0dB = 7;
+ hdmi_default_entry = 0;
} else if (IS_BROADWELL(dev)) {
ddi_translations_fdi = bdw_ddi_translations_fdi;
ddi_translations_dp = bdw_ddi_translations_dp;
@@ -234,7 +232,7 @@
n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
- hdmi_800mV_0dB = 7;
+ hdmi_default_entry = 7;
} else if (IS_HASWELL(dev)) {
ddi_translations_fdi = hsw_ddi_translations_fdi;
ddi_translations_dp = hsw_ddi_translations_dp;
@@ -242,7 +240,7 @@
ddi_translations_hdmi = hsw_ddi_translations_hdmi;
n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
- hdmi_800mV_0dB = 6;
+ hdmi_default_entry = 6;
} else {
WARN(1, "ddi translation table missing\n");
ddi_translations_edp = bdw_ddi_translations_dp;
@@ -252,7 +250,7 @@
n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
- hdmi_800mV_0dB = 7;
+ hdmi_default_entry = 7;
}
switch (port) {
@@ -295,7 +293,7 @@
/* Choose a good default if VBT is badly populated */
if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN ||
hdmi_level >= n_hdmi_entries)
- hdmi_level = hdmi_800mV_0dB;
+ hdmi_level = hdmi_default_entry;
/* Entry 9 is for HDMI: */
I915_WRITE(reg, ddi_translations_hdmi[hdmi_level].trans1);