net: dsa: remove dsa_switch_alloc helper
Now that ports are dynamically listed in the fabric, there is no need
to provide a special helper to allocate the dsa_switch structure. This
will give more flexibility to drivers to embed this structure as they
wish in their private structure.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index aef9b56..baadf62 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2341,10 +2341,13 @@ struct b53_device *b53_switch_alloc(struct device *base,
struct dsa_switch *ds;
struct b53_device *dev;
- ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
+ ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
if (!ds)
return NULL;
+ ds->dev = base;
+ ds->num_ports = DSA_MAX_PORTS;
+
dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index 925ed13..c8d7ef2 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -286,10 +286,13 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
dev_info(&mdiodev->dev, "%s: 0x%0x\n",
pdata->name, pdata->enabled_ports);
- ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+ ds = devm_kzalloc(&mdiodev->dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = &mdiodev->dev;
+ ds->num_ports = DSA_MAX_PORTS;
+
ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL);
if (!ps)
return -ENOMEM;
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index bbec86b..e3c333a 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1283,10 +1283,12 @@ static int lan9303_register_switch(struct lan9303 *chip)
{
int base;
- chip->ds = dsa_switch_alloc(chip->dev, LAN9303_NUM_PORTS);
+ chip->ds = devm_kzalloc(chip->dev, sizeof(*chip->ds), GFP_KERNEL);
if (!chip->ds)
return -ENOMEM;
+ chip->ds->dev = chip->dev;
+ chip->ds->num_ports = LAN9303_NUM_PORTS;
chip->ds->priv = chip;
chip->ds->ops = &lan9303_switch_ops;
base = chip->phy_addr_base;
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index a69c9b9..9553249 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1854,10 +1854,12 @@ static int gswip_probe(struct platform_device *pdev)
if (!priv->hw_info)
return -EINVAL;
- priv->ds = dsa_switch_alloc(dev, priv->hw_info->max_ports);
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->hw_info->max_ports;
priv->ds->priv = priv;
priv->ds->ops = &gswip_switch_ops;
priv->dev = dev;
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index fe47180..5d08e44 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -398,10 +398,13 @@ struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
struct dsa_switch *ds;
struct ksz_device *swdev;
- ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
+ ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
if (!ds)
return NULL;
+ ds->dev = base;
+ ds->num_ports = DSA_MAX_PORTS;
+
swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
if (!swdev)
return NULL;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a91293e..add9e42 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1632,10 +1632,13 @@ mt7530_probe(struct mdio_device *mdiodev)
if (!priv)
return -ENOMEM;
- priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = DSA_MAX_PORTS;
+
/* Use medatek,mcm property to distinguish hardware type that would
* casues a little bit differences on power-on sequence.
*/
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 2a2489b..a5a37f4 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -270,10 +270,12 @@ static int mv88e6060_probe(struct mdio_device *mdiodev)
dev_info(dev, "switch %s detected\n", name);
- ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = MV88E6060_PORTS;
ds->priv = priv;
ds->dev = dev;
ds->ops = &mv88e6060_switch_ops;
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c53d4dc..5fdf6d6 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4978,10 +4978,12 @@ static int mv88e6xxx_register_switch(struct mv88e6xxx_chip *chip)
struct device *dev = chip->dev;
struct dsa_switch *ds;
- ds = dsa_switch_alloc(dev, mv88e6xxx_num_ports(chip));
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = mv88e6xxx_num_ports(chip);
ds->priv = chip;
ds->dev = dev;
ds->ops = &mv88e6xxx_switch_ops;
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 71e44c8..7e742cd 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1077,10 +1077,13 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
if (id != QCA8K_ID_QCA8337)
return -ENODEV;
- priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds),
+ QCA8K_NUM_PORTS);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = DSA_MAX_PORTS;
priv->ds->priv = priv;
priv->ops = qca8k_switch_ops;
priv->ds->ops = &priv->ops;
diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c
index dc0509c..fae188c 100644
--- a/drivers/net/dsa/realtek-smi-core.c
+++ b/drivers/net/dsa/realtek-smi-core.c
@@ -444,9 +444,12 @@ static int realtek_smi_probe(struct platform_device *pdev)
return ret;
}
- smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+ smi->ds = devm_kzalloc(dev, sizeof(*smi->ds), GFP_KERNEL);
if (!smi->ds)
return -ENOMEM;
+
+ smi->ds->dev = dev;
+ smi->ds->num_ports = smi->num_ports;
smi->ds->priv = smi;
smi->ds->ops = var->ds_ops;
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 0ebbda5..2ae84a9 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2047,10 +2047,12 @@ static int sja1105_probe(struct spi_device *spi)
dev_info(dev, "Probed switch chip: %s\n", priv->info->name);
- ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS);
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = SJA1105_NUM_PORTS;
ds->ops = &sja1105_switch_ops;
ds->priv = priv;
priv->ds = ds;
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 614377e..42c1574 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -1178,9 +1178,12 @@ int vsc73xx_probe(struct vsc73xx *vsc)
* We allocate 8 ports and avoid access to the nonexistant
* ports.
*/
- vsc->ds = dsa_switch_alloc(dev, 8);
+ vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
if (!vsc->ds)
return -ENOMEM;
+
+ vsc->ds->dev = dev;
+ vsc->ds->num_ports = 8;
vsc->ds->priv = vsc;
vsc->ds->ops = &vsc73xx_ds_ops;