| /* |
| * Copyright 2015 IBM Corp. |
| * |
| * Joel Stanley <joel@jms.id.au> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <asm/div64.h> |
| #include <linux/clk.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/hashtable.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| |
| struct aspeed_bank_props { |
| unsigned int bank; |
| u32 input; |
| u32 output; |
| }; |
| |
| struct aspeed_gpio_config { |
| unsigned int nr_gpios; |
| const struct aspeed_bank_props *props; |
| }; |
| |
| /* |
| * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled |
| * @timer_users: Tracks the number of users for each timer |
| * |
| * The @timer_users has four elements but the first element is unused. This is |
| * to simplify accounting and indexing, as a zero value in @offset_timer |
| * represents disabled debouncing for the GPIO. Any other value for an element |
| * of @offset_timer is used as an index into @timer_users. This behaviour of |
| * the zero value aligns with the behaviour of zero built from the timer |
| * configuration registers (i.e. debouncing is disabled). |
| */ |
| struct aspeed_gpio { |
| struct gpio_chip chip; |
| spinlock_t lock; |
| void __iomem *base; |
| int irq; |
| const struct aspeed_gpio_config *config; |
| |
| u8 *offset_timer; |
| unsigned int timer_users[4]; |
| struct clk *clk; |
| }; |
| |
| struct aspeed_gpio_bank { |
| uint16_t val_regs; |
| uint16_t irq_regs; |
| uint16_t debounce_regs; |
| uint16_t tolerance_regs; |
| const char names[4][3]; |
| }; |
| |
| static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 }; |
| |
| static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { |
| { |
| .val_regs = 0x0000, |
| .irq_regs = 0x0008, |
| .debounce_regs = 0x0040, |
| .tolerance_regs = 0x001c, |
| .names = { "A", "B", "C", "D" }, |
| }, |
| { |
| .val_regs = 0x0020, |
| .irq_regs = 0x0028, |
| .debounce_regs = 0x0048, |
| .tolerance_regs = 0x003c, |
| .names = { "E", "F", "G", "H" }, |
| }, |
| { |
| .val_regs = 0x0070, |
| .irq_regs = 0x0098, |
| .debounce_regs = 0x00b0, |
| .tolerance_regs = 0x00ac, |
| .names = { "I", "J", "K", "L" }, |
| }, |
| { |
| .val_regs = 0x0078, |
| .irq_regs = 0x00e8, |
| .debounce_regs = 0x0100, |
| .tolerance_regs = 0x00fc, |
| .names = { "M", "N", "O", "P" }, |
| }, |
| { |
| .val_regs = 0x0080, |
| .irq_regs = 0x0118, |
| .debounce_regs = 0x0130, |
| .tolerance_regs = 0x012c, |
| .names = { "Q", "R", "S", "T" }, |
| }, |
| { |
| .val_regs = 0x0088, |
| .irq_regs = 0x0148, |
| .debounce_regs = 0x0160, |
| .tolerance_regs = 0x015c, |
| .names = { "U", "V", "W", "X" }, |
| }, |
| { |
| .val_regs = 0x01E0, |
| .irq_regs = 0x0178, |
| .debounce_regs = 0x0190, |
| .tolerance_regs = 0x018c, |
| .names = { "Y", "Z", "AA", "AB" }, |
| }, |
| { |
| .val_regs = 0x01e8, |
| .irq_regs = 0x01a8, |
| .debounce_regs = 0x01c0, |
| .tolerance_regs = 0x01bc, |
| .names = { "AC", "", "", "" }, |
| }, |
| }; |
| |
| #define GPIO_BANK(x) ((x) >> 5) |
| #define GPIO_OFFSET(x) ((x) & 0x1f) |
| #define GPIO_BIT(x) BIT(GPIO_OFFSET(x)) |
| |
| #define GPIO_DATA 0x00 |
| #define GPIO_DIR 0x04 |
| |
| #define GPIO_IRQ_ENABLE 0x00 |
| #define GPIO_IRQ_TYPE0 0x04 |
| #define GPIO_IRQ_TYPE1 0x08 |
| #define GPIO_IRQ_TYPE2 0x0c |
| #define GPIO_IRQ_STATUS 0x10 |
| |
| #define GPIO_DEBOUNCE_SEL1 0x00 |
| #define GPIO_DEBOUNCE_SEL2 0x04 |
| |
| #define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o)) |
| #define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1) |
| #define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0) |
| |
| static const struct aspeed_gpio_bank *to_bank(unsigned int offset) |
| { |
| unsigned int bank = GPIO_BANK(offset); |
| |
| WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks)); |
| return &aspeed_gpio_banks[bank]; |
| } |
| |
| static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props) |
| { |
| return !(props->input || props->output); |
| } |
| |
| static inline const struct aspeed_bank_props *find_bank_props( |
| struct aspeed_gpio *gpio, unsigned int offset) |
| { |
| const struct aspeed_bank_props *props = gpio->config->props; |
| |
| while (!is_bank_props_sentinel(props)) { |
| if (props->bank == GPIO_BANK(offset)) |
| return props; |
| props++; |
| } |
| |
| return NULL; |
| } |
| |
| static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) |
| { |
| const struct aspeed_bank_props *props = find_bank_props(gpio, offset); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| unsigned int group = GPIO_OFFSET(offset) / 8; |
| |
| return bank->names[group][0] != '\0' && |
| (!props || ((props->input | props->output) & GPIO_BIT(offset))); |
| } |
| |
| static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset) |
| { |
| const struct aspeed_bank_props *props = find_bank_props(gpio, offset); |
| |
| return !props || (props->input & GPIO_BIT(offset)); |
| } |
| |
| #define have_irq(g, o) have_input((g), (o)) |
| #define have_debounce(g, o) have_input((g), (o)) |
| |
| static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset) |
| { |
| const struct aspeed_bank_props *props = find_bank_props(gpio, offset); |
| |
| return !props || (props->output & GPIO_BIT(offset)); |
| } |
| |
| static void __iomem *bank_val_reg(struct aspeed_gpio *gpio, |
| const struct aspeed_gpio_bank *bank, |
| unsigned int reg) |
| { |
| return gpio->base + bank->val_regs + reg; |
| } |
| |
| static void __iomem *bank_irq_reg(struct aspeed_gpio *gpio, |
| const struct aspeed_gpio_bank *bank, |
| unsigned int reg) |
| { |
| return gpio->base + bank->irq_regs + reg; |
| } |
| |
| static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| |
| return !!(ioread32(bank_val_reg(gpio, bank, GPIO_DATA)) |
| & GPIO_BIT(offset)); |
| } |
| |
| static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, |
| int val) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| void __iomem *addr; |
| u32 reg; |
| |
| addr = bank_val_reg(gpio, bank, GPIO_DATA); |
| reg = ioread32(addr); |
| |
| if (val) |
| reg |= GPIO_BIT(offset); |
| else |
| reg &= ~GPIO_BIT(offset); |
| |
| iowrite32(reg, addr); |
| } |
| |
| static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, |
| int val) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| __aspeed_gpio_set(gc, offset, val); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| } |
| |
| static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| unsigned long flags; |
| u32 reg; |
| |
| if (!have_input(gpio, offset)) |
| return -ENOTSUPP; |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)); |
| iowrite32(reg & ~GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR)); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return 0; |
| } |
| |
| static int aspeed_gpio_dir_out(struct gpio_chip *gc, |
| unsigned int offset, int val) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| unsigned long flags; |
| u32 reg; |
| |
| if (!have_output(gpio, offset)) |
| return -ENOTSUPP; |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)); |
| iowrite32(reg | GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR)); |
| |
| __aspeed_gpio_set(gc, offset, val); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return 0; |
| } |
| |
| static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(gc); |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| unsigned long flags; |
| u32 val; |
| |
| if (!have_input(gpio, offset)) |
| return 0; |
| |
| if (!have_output(gpio, offset)) |
| return 1; |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| val = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)) & GPIO_BIT(offset); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return !val; |
| |
| } |
| |
| static inline int irqd_to_aspeed_gpio_data(struct irq_data *d, |
| struct aspeed_gpio **gpio, |
| const struct aspeed_gpio_bank **bank, |
| u32 *bit) |
| { |
| int offset; |
| struct aspeed_gpio *internal; |
| |
| offset = irqd_to_hwirq(d); |
| |
| internal = irq_data_get_irq_chip_data(d); |
| |
| /* This might be a bit of a questionable place to check */ |
| if (!have_irq(internal, offset)) |
| return -ENOTSUPP; |
| |
| *gpio = internal; |
| *bank = to_bank(offset); |
| *bit = GPIO_BIT(offset); |
| |
| return 0; |
| } |
| |
| static void aspeed_gpio_irq_ack(struct irq_data *d) |
| { |
| const struct aspeed_gpio_bank *bank; |
| struct aspeed_gpio *gpio; |
| unsigned long flags; |
| void __iomem *status_addr; |
| u32 bit; |
| int rc; |
| |
| rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit); |
| if (rc) |
| return; |
| |
| status_addr = bank_irq_reg(gpio, bank, GPIO_IRQ_STATUS); |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| iowrite32(bit, status_addr); |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| } |
| |
| static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set) |
| { |
| const struct aspeed_gpio_bank *bank; |
| struct aspeed_gpio *gpio; |
| unsigned long flags; |
| u32 reg, bit; |
| void __iomem *addr; |
| int rc; |
| |
| rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit); |
| if (rc) |
| return; |
| |
| addr = bank_irq_reg(gpio, bank, GPIO_IRQ_ENABLE); |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| reg = ioread32(addr); |
| if (set) |
| reg |= bit; |
| else |
| reg &= ~bit; |
| iowrite32(reg, addr); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| } |
| |
| static void aspeed_gpio_irq_mask(struct irq_data *d) |
| { |
| aspeed_gpio_irq_set_mask(d, false); |
| } |
| |
| static void aspeed_gpio_irq_unmask(struct irq_data *d) |
| { |
| aspeed_gpio_irq_set_mask(d, true); |
| } |
| |
| static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type) |
| { |
| u32 type0 = 0; |
| u32 type1 = 0; |
| u32 type2 = 0; |
| u32 bit, reg; |
| const struct aspeed_gpio_bank *bank; |
| irq_flow_handler_t handler; |
| struct aspeed_gpio *gpio; |
| unsigned long flags; |
| void __iomem *addr; |
| int rc; |
| |
| rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit); |
| if (rc) |
| return -EINVAL; |
| |
| switch (type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_EDGE_BOTH: |
| type2 |= bit; |
| /* fall through */ |
| case IRQ_TYPE_EDGE_RISING: |
| type0 |= bit; |
| /* fall through */ |
| case IRQ_TYPE_EDGE_FALLING: |
| handler = handle_edge_irq; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| type0 |= bit; |
| /* fall through */ |
| case IRQ_TYPE_LEVEL_LOW: |
| type1 |= bit; |
| handler = handle_level_irq; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE0); |
| reg = ioread32(addr); |
| reg = (reg & ~bit) | type0; |
| iowrite32(reg, addr); |
| |
| addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE1); |
| reg = ioread32(addr); |
| reg = (reg & ~bit) | type1; |
| iowrite32(reg, addr); |
| |
| addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE2); |
| reg = ioread32(addr); |
| reg = (reg & ~bit) | type2; |
| iowrite32(reg, addr); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| irq_set_handler_locked(d, handler); |
| |
| return 0; |
| } |
| |
| static void aspeed_gpio_irq_handler(struct irq_desc *desc) |
| { |
| struct gpio_chip *gc = irq_desc_get_handler_data(desc); |
| struct irq_chip *ic = irq_desc_get_chip(desc); |
| struct aspeed_gpio *data = gpiochip_get_data(gc); |
| unsigned int i, p, girq; |
| unsigned long reg; |
| |
| chained_irq_enter(ic, desc); |
| |
| for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) { |
| const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; |
| |
| reg = ioread32(bank_irq_reg(data, bank, GPIO_IRQ_STATUS)); |
| |
| for_each_set_bit(p, ®, 32) { |
| girq = irq_find_mapping(gc->irq.domain, i * 32 + p); |
| generic_handle_irq(girq); |
| } |
| |
| } |
| |
| chained_irq_exit(ic, desc); |
| } |
| |
| static struct irq_chip aspeed_gpio_irqchip = { |
| .name = "aspeed-gpio", |
| .irq_ack = aspeed_gpio_irq_ack, |
| .irq_mask = aspeed_gpio_irq_mask, |
| .irq_unmask = aspeed_gpio_irq_unmask, |
| .irq_set_type = aspeed_gpio_set_type, |
| }; |
| |
| static void set_irq_valid_mask(struct aspeed_gpio *gpio) |
| { |
| const struct aspeed_bank_props *props = gpio->config->props; |
| |
| while (!is_bank_props_sentinel(props)) { |
| unsigned int offset; |
| const unsigned long int input = props->input; |
| |
| /* Pretty crummy approach, but similar to GPIO core */ |
| for_each_clear_bit(offset, &input, 32) { |
| unsigned int i = props->bank * 32 + offset; |
| |
| if (i >= gpio->config->nr_gpios) |
| break; |
| |
| clear_bit(i, gpio->chip.irq.valid_mask); |
| } |
| |
| props++; |
| } |
| } |
| |
| static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio, |
| struct platform_device *pdev) |
| { |
| int rc; |
| |
| rc = platform_get_irq(pdev, 0); |
| if (rc < 0) |
| return rc; |
| |
| gpio->irq = rc; |
| |
| set_irq_valid_mask(gpio); |
| |
| rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip, |
| 0, handle_bad_irq, IRQ_TYPE_NONE); |
| if (rc) { |
| dev_info(&pdev->dev, "Could not add irqchip\n"); |
| return rc; |
| } |
| |
| gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip, |
| gpio->irq, aspeed_gpio_irq_handler); |
| |
| return 0; |
| } |
| |
| static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, |
| unsigned int offset, bool enable) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(chip); |
| const struct aspeed_gpio_bank *bank; |
| unsigned long flags; |
| u32 val; |
| |
| bank = to_bank(offset); |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| val = readl(gpio->base + bank->tolerance_regs); |
| |
| if (enable) |
| val |= GPIO_BIT(offset); |
| else |
| val &= ~GPIO_BIT(offset); |
| |
| writel(val, gpio->base + bank->tolerance_regs); |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return 0; |
| } |
| |
| static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset) |
| { |
| if (!have_gpio(gpiochip_get_data(chip), offset)) |
| return -ENODEV; |
| |
| return pinctrl_gpio_request(chip->base + offset); |
| } |
| |
| static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset) |
| { |
| pinctrl_gpio_free(chip->base + offset); |
| } |
| |
| static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio, |
| const struct aspeed_gpio_bank *bank, |
| unsigned int reg) |
| { |
| return gpio->base + bank->debounce_regs + reg; |
| } |
| |
| static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs, |
| u32 *cycles) |
| { |
| u64 rate; |
| u64 n; |
| u32 r; |
| |
| rate = clk_get_rate(gpio->clk); |
| if (!rate) |
| return -ENOTSUPP; |
| |
| n = rate * usecs; |
| r = do_div(n, 1000000); |
| |
| if (n >= U32_MAX) |
| return -ERANGE; |
| |
| /* At least as long as the requested time */ |
| *cycles = n + (!!r); |
| |
| return 0; |
| } |
| |
| /* Call under gpio->lock */ |
| static int register_allocated_timer(struct aspeed_gpio *gpio, |
| unsigned int offset, unsigned int timer) |
| { |
| if (WARN(gpio->offset_timer[offset] != 0, |
| "Offset %d already allocated timer %d\n", |
| offset, gpio->offset_timer[offset])) |
| return -EINVAL; |
| |
| if (WARN(gpio->timer_users[timer] == UINT_MAX, |
| "Timer user count would overflow\n")) |
| return -EPERM; |
| |
| gpio->offset_timer[offset] = timer; |
| gpio->timer_users[timer]++; |
| |
| return 0; |
| } |
| |
| /* Call under gpio->lock */ |
| static int unregister_allocated_timer(struct aspeed_gpio *gpio, |
| unsigned int offset) |
| { |
| if (WARN(gpio->offset_timer[offset] == 0, |
| "No timer allocated to offset %d\n", offset)) |
| return -EINVAL; |
| |
| if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0, |
| "No users recorded for timer %d\n", |
| gpio->offset_timer[offset])) |
| return -EINVAL; |
| |
| gpio->timer_users[gpio->offset_timer[offset]]--; |
| gpio->offset_timer[offset] = 0; |
| |
| return 0; |
| } |
| |
| /* Call under gpio->lock */ |
| static inline bool timer_allocation_registered(struct aspeed_gpio *gpio, |
| unsigned int offset) |
| { |
| return gpio->offset_timer[offset] > 0; |
| } |
| |
| /* Call under gpio->lock */ |
| static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset, |
| unsigned int timer) |
| { |
| const struct aspeed_gpio_bank *bank = to_bank(offset); |
| const u32 mask = GPIO_BIT(offset); |
| void __iomem *addr; |
| u32 val; |
| |
| addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1); |
| val = ioread32(addr); |
| iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr); |
| |
| addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2); |
| val = ioread32(addr); |
| iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr); |
| } |
| |
| static int enable_debounce(struct gpio_chip *chip, unsigned int offset, |
| unsigned long usecs) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(chip); |
| u32 requested_cycles; |
| unsigned long flags; |
| int rc; |
| int i; |
| |
| if (!gpio->clk) |
| return -EINVAL; |
| |
| rc = usecs_to_cycles(gpio, usecs, &requested_cycles); |
| if (rc < 0) { |
| dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n", |
| usecs, clk_get_rate(gpio->clk), rc); |
| return rc; |
| } |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| if (timer_allocation_registered(gpio, offset)) { |
| rc = unregister_allocated_timer(gpio, offset); |
| if (rc < 0) |
| goto out; |
| } |
| |
| /* Try to find a timer already configured for the debounce period */ |
| for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) { |
| u32 cycles; |
| |
| cycles = ioread32(gpio->base + debounce_timers[i]); |
| if (requested_cycles == cycles) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(debounce_timers)) { |
| int j; |
| |
| /* |
| * As there are no timers configured for the requested debounce |
| * period, find an unused timer instead |
| */ |
| for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) { |
| if (gpio->timer_users[j] == 0) |
| break; |
| } |
| |
| if (j == ARRAY_SIZE(gpio->timer_users)) { |
| dev_warn(chip->parent, |
| "Debounce timers exhausted, cannot debounce for period %luus\n", |
| usecs); |
| |
| rc = -EPERM; |
| |
| /* |
| * We already adjusted the accounting to remove @offset |
| * as a user of its previous timer, so also configure |
| * the hardware so @offset has timers disabled for |
| * consistency. |
| */ |
| configure_timer(gpio, offset, 0); |
| goto out; |
| } |
| |
| i = j; |
| |
| iowrite32(requested_cycles, gpio->base + debounce_timers[i]); |
| } |
| |
| if (WARN(i == 0, "Cannot register index of disabled timer\n")) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| register_allocated_timer(gpio, offset, i); |
| configure_timer(gpio, offset, i); |
| |
| out: |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return rc; |
| } |
| |
| static int disable_debounce(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(chip); |
| unsigned long flags; |
| int rc; |
| |
| spin_lock_irqsave(&gpio->lock, flags); |
| |
| rc = unregister_allocated_timer(gpio, offset); |
| if (!rc) |
| configure_timer(gpio, offset, 0); |
| |
| spin_unlock_irqrestore(&gpio->lock, flags); |
| |
| return rc; |
| } |
| |
| static int set_debounce(struct gpio_chip *chip, unsigned int offset, |
| unsigned long usecs) |
| { |
| struct aspeed_gpio *gpio = gpiochip_get_data(chip); |
| |
| if (!have_debounce(gpio, offset)) |
| return -ENOTSUPP; |
| |
| if (usecs) |
| return enable_debounce(chip, offset, usecs); |
| |
| return disable_debounce(chip, offset); |
| } |
| |
| static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset, |
| unsigned long config) |
| { |
| unsigned long param = pinconf_to_config_param(config); |
| u32 arg = pinconf_to_config_argument(config); |
| |
| if (param == PIN_CONFIG_INPUT_DEBOUNCE) |
| return set_debounce(chip, offset, arg); |
| else if (param == PIN_CONFIG_BIAS_DISABLE || |
| param == PIN_CONFIG_BIAS_PULL_DOWN || |
| param == PIN_CONFIG_DRIVE_STRENGTH) |
| return pinctrl_gpio_set_config(offset, config); |
| else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN || |
| param == PIN_CONFIG_DRIVE_OPEN_SOURCE) |
| /* Return -ENOTSUPP to trigger emulation, as per datasheet */ |
| return -ENOTSUPP; |
| else if (param == PIN_CONFIG_PERSIST_STATE) |
| return aspeed_gpio_reset_tolerance(chip, offset, arg); |
| |
| return -ENOTSUPP; |
| } |
| |
| /* |
| * Any banks not specified in a struct aspeed_bank_props array are assumed to |
| * have the properties: |
| * |
| * { .input = 0xffffffff, .output = 0xffffffff } |
| */ |
| |
| static const struct aspeed_bank_props ast2400_bank_props[] = { |
| /* input output */ |
| { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */ |
| { 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */ |
| { }, |
| }; |
| |
| static const struct aspeed_gpio_config ast2400_config = |
| /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */ |
| { .nr_gpios = 220, .props = ast2400_bank_props, }; |
| |
| static const struct aspeed_bank_props ast2500_bank_props[] = { |
| /* input output */ |
| { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */ |
| { 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */ |
| { 7, 0x000000ff, 0x000000ff }, /* AC */ |
| { }, |
| }; |
| |
| static const struct aspeed_gpio_config ast2500_config = |
| /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */ |
| { .nr_gpios = 232, .props = ast2500_bank_props, }; |
| |
| static const struct of_device_id aspeed_gpio_of_table[] = { |
| { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, }, |
| { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table); |
| |
| static int __init aspeed_gpio_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *gpio_id; |
| struct aspeed_gpio *gpio; |
| struct resource *res; |
| int rc; |
| |
| gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); |
| if (!gpio) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| gpio->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(gpio->base)) |
| return PTR_ERR(gpio->base); |
| |
| spin_lock_init(&gpio->lock); |
| |
| gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node); |
| if (!gpio_id) |
| return -EINVAL; |
| |
| gpio->clk = of_clk_get(pdev->dev.of_node, 0); |
| if (IS_ERR(gpio->clk)) { |
| dev_warn(&pdev->dev, |
| "Failed to get clock from devicetree, debouncing disabled\n"); |
| gpio->clk = NULL; |
| } |
| |
| gpio->config = gpio_id->data; |
| |
| gpio->chip.parent = &pdev->dev; |
| gpio->chip.ngpio = gpio->config->nr_gpios; |
| gpio->chip.parent = &pdev->dev; |
| gpio->chip.direction_input = aspeed_gpio_dir_in; |
| gpio->chip.direction_output = aspeed_gpio_dir_out; |
| gpio->chip.get_direction = aspeed_gpio_get_direction; |
| gpio->chip.request = aspeed_gpio_request; |
| gpio->chip.free = aspeed_gpio_free; |
| gpio->chip.get = aspeed_gpio_get; |
| gpio->chip.set = aspeed_gpio_set; |
| gpio->chip.set_config = aspeed_gpio_set_config; |
| gpio->chip.label = dev_name(&pdev->dev); |
| gpio->chip.base = -1; |
| gpio->chip.irq.need_valid_mask = true; |
| |
| rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); |
| if (rc < 0) |
| return rc; |
| |
| gpio->offset_timer = |
| devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); |
| |
| return aspeed_gpio_setup_irqs(gpio, pdev); |
| } |
| |
| static struct platform_driver aspeed_gpio_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = aspeed_gpio_of_table, |
| }, |
| }; |
| |
| module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe); |
| |
| MODULE_DESCRIPTION("Aspeed GPIO Driver"); |
| MODULE_LICENSE("GPL"); |