Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
FEC: Fix kernel panic in fec_set_mac_address.
ipv6: Fix default multicast hops setting.
net: ep93xx_eth stops receiving packets
drivers/net/phy: micrel phy driver
dm9601: fix phy/eeprom write routine
ppp_generic: handle non-linear skbs when passing them to pppd
ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
net: fix compile error due to double return type in SOCK_DEBUG
net/usb: initiate sync sequence in sierra_net.c driver
net/usb: remove default in Kconfig for sierra_net driver
r8169: Fix rtl8169_rx_interrupt()
e1000e: Fix oops caused by ASPM patch.
net/sb1250: register mdio bus in probe
sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4)
p54pci: fix bugs in p54p_check_tx_ring
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index f5395af..40ada93 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -234,7 +234,7 @@
Linus, usually the patches that have already been included in the
-next kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
- can be found at http://git.or.cz/) but plain patches are also just
+ can be found at http://git-scm.com/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index fd588ff0..a1ca592 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -235,8 +235,7 @@
- cgroup.procs: list of tgids in the cgroup. This list is not
guaranteed to be sorted or free of duplicate tgids, and userspace
should sort/uniquify the list if this property is required.
- Writing a tgid into this file moves all threads with that tgid into
- this cgroup.
+ This is a read-only file, for now.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 3219ee0..5ebf5af 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -74,6 +74,11 @@
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
Accessing the client
====================
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index a10c3b6..56941ae 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -333,14 +333,14 @@
byte 1:
bit 7 6 5 4 3 2 1 0
- x15 x14 x13 x12 x11 x10 x9 x8
+ . . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
- x15..x0 = absolute x value (horizontal)
+ x10..x0 = absolute x value (horizontal)
byte 3:
@@ -350,14 +350,14 @@
byte 4:
bit 7 6 5 4 3 2 1 0
- y15 y14 y13 y12 y11 y10 y8 y8
+ . . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y15..y0 = absolute y value (vertical)
+ y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e2202e9..839b21b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1194,7 +1194,7 @@
libata.force= [LIBATA] Force configurations. The format is comma
separated list of "[ID:]VAL" where ID is
- PORT[:DEVICE]. PORT and DEVICE are decimal numbers
+ PORT[.DEVICE]. PORT and DEVICE are decimal numbers
matching port, link or device. Basically, it matches
the ATA ID string printed on console by libata. If
the whole ID part is omitted, the last PORT and DEVICE
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index 10abd37..16feda9 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -58,7 +58,7 @@
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 5effa5b..e213f45 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -18,16 +18,15 @@
- It cannot contain any "trivial" fixes in it (spelling changes,
whitespace cleanups, etc).
- It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree. Quote the
- respective commit ID in Linus' tree in your patch submission to -stable.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
- stable@kernel.org.
- - To have the patch automatically included in the stable tree, add the
- the tag
+ stable@kernel.org. You must note the upstream commit ID in the changelog
+ of your submission.
+ - To have the patch automatically included in the stable tree, add the tag
Cc: stable@kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
diff --git a/MAINTAINERS b/MAINTAINERS
index a0e3c3a..d5b0b1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1960,7 +1960,7 @@
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
-L: dri-devel@lists.sourceforge.net
+L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
@@ -4482,17 +4482,17 @@
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
@@ -4791,12 +4791,11 @@
S390 ZFCP DRIVER
M: Christof Schmitt <christof.schmitt@de.ibm.com>
-M: Martin Peschke <mp3@de.ibm.com>
+M: Swen Schillig <swen@vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
-F: Documentation/s390/zfcpdump.txt
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
diff --git a/Makefile b/Makefile
index fa1db90..5f05f8c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Sheep on Meth
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c5408bf..92622eb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -253,6 +253,7 @@
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 1e12167..6ac6693 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 12:01:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,6 +18,7 @@
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -32,6 +33,12 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -43,21 +50,22 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -75,19 +83,21 @@
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -115,24 +125,53 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
@@ -149,6 +188,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -157,19 +197,26 @@
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_FPGA11107 is not set
CONFIG_ARCH_BCM11107=y
@@ -185,7 +232,7 @@
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -201,6 +248,8 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
@@ -222,6 +271,8 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -229,6 +280,7 @@
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -240,8 +292,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
@@ -335,9 +386,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -433,6 +484,10 @@
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -444,6 +499,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -452,6 +508,7 @@
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -459,6 +516,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -508,6 +566,7 @@
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -519,13 +578,17 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -541,6 +604,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@@ -566,14 +630,17 @@
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -589,9 +656,12 @@
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -647,6 +717,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -657,7 +728,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -675,11 +745,12 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -693,6 +764,7 @@
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -700,7 +772,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 216ad00..9405e32 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -1058,7 +1058,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index f5c6e11..881faea 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -661,7 +661,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index ea9a501..5e55b55 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -680,7 +680,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 45135ff..473f9e1 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -59,8 +59,6 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -480,7 +478,6 @@
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 00f46d9..6e8f05c 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -149,10 +149,10 @@
#define USER(x...) \
9999: x; \
- .section __ex_table,"a"; \
+ .pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
- .previous
+ .popsection
/*
* SMP data memory barrier
@@ -193,10 +193,10 @@
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
@@ -234,10 +234,10 @@
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endr
.endm
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index bfcc159..540a044 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -21,14 +21,14 @@
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
- " .section __ex_table,\"a\"\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
- " .previous\n" \
- " .section .fixup,\"ax\"\n" \
+ " .popsection\n" \
+ " .pushsection .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
- " .previous" \
+ " .popsection" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
@@ -102,14 +102,14 @@
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
- " .section __ex_table,\"a\"\n"
+ " .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
- " .previous\n"
- " .section .fixup,\"ax\"\n"
+ " .popsection\n"
+ " .pushsection .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
- " .previous"
+ " .popsection"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 1d6bd40..33e4a48 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -229,16 +229,16 @@
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
@@ -265,16 +265,16 @@
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
@@ -310,15 +310,15 @@
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
@@ -343,15 +343,15 @@
__asm__ __volatile__( \
"1: strt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
@@ -371,16 +371,16 @@
THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, %3\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "+r" (__pu_addr) \
: "r" (x), "i" (-EFAULT) \
: "cc")
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 6c5cf36..e6a0fb0 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -523,16 +523,16 @@
/*
* The out of line fixup for the ldrt above.
*/
- .section .fixup, "ax"
+ .pushsection .fixup, "ax"
4: mov pc, r9
- .previous
- .section __ex_table,"a"
+ .popsection
+ .pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
.long 2b, 4b
.long 3b, 4b
#endif
- .previous
+ .popsection
/*
* Check whether the instruction is a co-processor instruction.
@@ -679,7 +679,7 @@
.data
ENTRY(fp_enter)
.word no_fp
- .previous
+ .text
ENTRY(no_fp)
mov pc, lr
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index c638427..0298286 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -62,15 +62,15 @@
" movne %0, #2 \n"
"3:\n"
- ".section .fixup, \"ax\"\n"
+ ".pushsection .fixup, \"ax\"\n"
"4: mov %0, #1 \n"
" b 3b \n"
- ".previous\n"
+ ".popsection\n"
- ".section __ex_table, \"a\"\n"
+ ".pushsection __ex_table, \"a\"\n"
" .long 1b, 4b \n"
" .long 2b, 4b \n"
- ".previous\n"
+ ".popsection\n"
: "=r"(err), "=r"(replaced)
: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 0e12e0a..acf5e6f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -355,7 +355,7 @@
* the thread function, and r3 points to the exit function.
*/
extern void kernel_thread_helper(void);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_helper, #function\n"
"kernel_thread_helper:\n"
@@ -363,11 +363,11 @@
" mov lr, r3\n"
" mov pc, r2\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
-" .previous");
+" .popsection");
#ifdef CONFIG_ARM_UNWIND
extern void kernel_thread_exit(long code);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_exit, #function\n"
"kernel_thread_exit:\n"
@@ -377,7 +377,7 @@
" nop\n"
" .fnend\n"
" .size kernel_thread_exit, . - kernel_thread_exit\n"
-" .previous");
+" .popsection");
#else
#define kernel_thread_exit do_exit
#endif
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index aaf7220..a673297 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -110,13 +110,13 @@
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 1001b, 1006b
.long 1002b, 1006b
.long 1003b, 1006b
.long 1004b, 1006b
- .previous
+ .popsection
#define instr r4
#define reg r5
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 1279abd..5e3f996 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -46,8 +46,8 @@
ldmfd sp!, {r1, pc}
ENDPROC(__clear_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, pc}
- .previous
+ .popsection
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index e4fe124..66a477a 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -90,7 +90,7 @@
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
@@ -100,5 +100,5 @@
bl __memzero
ldr r0, [sp], #4
copy_abort_end
- .previous
+ .popsection
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 1a71e15..027b69b 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -94,12 +94,12 @@
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
- .previous
+ .popsection
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index fd0e9dc..59ff6fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -68,7 +68,7 @@
* so properly, we would have to add in whatever registers were loaded before
* the fault, which, with the current asm above is not predictable.
*/
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 4
9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
@@ -80,4 +80,4 @@
strneb r0, [r1], #1
bne 9002b
load_regs
- .previous
+ .popsection
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index a1814d9..b1631a7 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -64,9 +64,9 @@
mov pc, lr
ENDPROC(__get_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
.long 3b, __get_user_bad
.long 4b, __get_user_bad
-.previous
+.popsection
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 02fedbf..5a01a23c 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -81,11 +81,11 @@
mov pc, lr
ENDPROC(__put_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __put_user_bad
.long 2b, __put_user_bad
.long 3b, __put_user_bad
.long 4b, __put_user_bad
.long 5b, __put_user_bad
.long 6b, __put_user_bad
-.previous
+.popsection
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 1c9814f..f202d7b 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -33,11 +33,11 @@
mov pc, lr
ENDPROC(__strncpy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
mov pc, lr
- .previous
+ .popsection
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 7855b29..0ecbb45 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -33,8 +33,8 @@
mov pc, lr
ENDPROC(__strnlen_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r0, #0
mov pc, lr
- .previous
+ .popsection
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index ffdd274..fee9f6f 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -279,10 +279,10 @@
b .Lc2u_finished
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, r4 - r7, pc}
- .previous
+ .popsection
/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
* Purpose : copy a block from user memory to kernel memory
@@ -545,7 +545,7 @@
b .Lcfu_finished
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
/*
* We took an exception. r0 contains a pointer to
@@ -559,5 +559,5 @@
blne __memzero
mov r0, r4
ldmfd sp!, {r4 - r7, pc}
- .previous
+ .popsection
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 9ad1185..20cfbcc 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -68,12 +68,6 @@
* ---------------------------------------------------------------------------
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#else
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
#define OMAP1_32K_TIMER_CR 0x08
@@ -150,15 +144,6 @@
.set_mode = omap_32k_timer_set_mode,
};
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_32k_timer;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a8a3d1e..2455dcc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -59,8 +59,10 @@
select OMAP_PACKAGE_CBB
config MACH_DEVKIT8000
- bool "DEVKIT8000 board"
- depends on ARCH_OMAP3
+ bool "DEVKIT8000 board"
+ depends on ARCH_OMAP3
+ select OMAP_PACKAGE_CUS
+ select OMAP_MUX
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index a0a2a11..504d2bd 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -96,6 +96,7 @@
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+ omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 6ae8805..c1c4389 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -294,9 +294,9 @@
static void __init am3517_evm_init(void)
{
- am3517_evm_i2c_init();
-
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+ am3517_evm_i2c_init();
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 5bfc13b..47e3af2 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -50,7 +50,6 @@
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <linux/usb/otg.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
@@ -269,20 +268,6 @@
devkit8000_vmmc1_supply.dev = mmc[0].dev;
devkit8000_vsim_supply.dev = mmc[0].dev;
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
-
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
return 0;
}
@@ -303,7 +288,7 @@
.dev = &devkit8000_lcd_device.dev,
},
{
- .supply = "vdss_dsi",
+ .supply = "vdds_dsi",
.dev = &devkit8000_dss_device.dev,
}
};
@@ -639,17 +624,21 @@
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init devkit8000_init(void)
{
+ omap_serial_init();
+
+ omap_dm9000_init();
+
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
@@ -659,25 +648,15 @@
spi_register_board_info(devkit8000_spi_board_info,
ARRAY_SIZE(devkit8000_spi_board_info));
- omap_serial_init();
-
- omap_dm9000_init();
-
devkit8000_ads7846_init();
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-
- gpio_request(170, "DVI_nPD");
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
-
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
devkit8000_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init devkit8000_map_io(void)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3c7789d..d55c57b 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -458,13 +458,13 @@
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
- .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL,
};
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index da9bcb8..3ccc34e 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -216,7 +216,7 @@
*/
#define N8X0_SLOT_SWITCH_GPIO 96
#define N810_EMMC_VSD_GPIO 23
-#define NN810_EMMC_VIO_GPIO 9
+#define N810_EMMC_VIO_GPIO 9
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
@@ -304,10 +304,10 @@
if (power_on) {
gpio_set_value(N810_EMMC_VSD_GPIO, 1);
msleep(1);
- gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 1);
msleep(1);
} else {
- gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 0);
msleep(50);
gpio_set_value(N810_EMMC_VSD_GPIO, 0);
msleep(50);
@@ -468,7 +468,7 @@
if (machine_is_nokia_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
- gpio_free(NN810_EMMC_VIO_GPIO);
+ gpio_free(N810_EMMC_VIO_GPIO);
}
}
@@ -529,7 +529,7 @@
err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
if (err)
- return err;
+ return;
gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
@@ -537,17 +537,17 @@
err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
- return err;
+ return;
}
gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
- err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+ err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
gpio_free(N810_EMMC_VSD_GPIO);
- return err;
+ return;
}
- gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+ gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
index b1b88de..2d02632 100644
--- a/arch/arm/mach-omap2/board-sdp-flash.c
+++ b/arch/arm/mach-omap2/board-sdp-flash.c
@@ -253,20 +253,20 @@
}
if (norcs > GPMC_CS_NUM)
- printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ printk(KERN_INFO "NOR: Unable to find configuration "
+ "in GPMC\n");
else
board_nor_init(sdp_partition_info[0], norcs);
if (onenandcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_onenand_init(sdp_partition_info[1], onenandcs);
if (nandcs > GPMC_CS_NUM)
printk(KERN_INFO "NAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_nand_init(sdp_partition_info[2], nandcs);
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bb4018b..e15d2e8 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -96,7 +96,7 @@
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
- .id = 3,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ca95d8d..6b39849 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -280,7 +280,6 @@
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
- omap_serial_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index d5153b6..9cba556 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -895,7 +895,7 @@
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
+ .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT,
.flags = INVERT_ENABLE,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 28b1079..a5c0c9c 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -2671,10 +2671,10 @@
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index b87ad66..6e568ec 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -240,7 +240,7 @@
bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
else
bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
else
@@ -812,7 +812,7 @@
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
__ffs(clkdm->clktrctrl_mask));
@@ -856,7 +856,7 @@
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
__ffs(clkdm->clktrctrl_mask));
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 23e4d77..2271b9b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -726,7 +726,7 @@
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
- irq = OMAP44XX_IRQ_MMC4;
+ irq = OMAP44XX_IRQ_MMC5;
break;
default:
continue;
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 64d74f0..e57fb29 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -39,6 +39,9 @@
struct gpmc_timings t;
int err;
+ if (!gpmc_nand_data->gpmc_t)
+ return 0;
+
memset(&t, 0, sizeof(t));
t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ff25c7e..50fd749 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -52,7 +52,7 @@
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000f0000 @ only check architecture
- cmp \tmp, #0x00060000 @ is v6?
+ cmp \tmp, #0x00070000 @ is v6?
beq 2400f @ found v6 so it's omap24xx
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index aa3f65c..ef0e7a0 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -33,7 +33,7 @@
ENTRY(omap_secondary_startup)
hold: ldr r12,=0x103
dsb
- smc @ read from AuxCoreBoot0
+ smc #0 @ read from AuxCoreBoot0
mov r0, r0, lsr #9
mrc p15, 0, r4, c0, c0, 5
and r4, r4, #0x0f
@@ -52,7 +52,7 @@
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
dsb
- smc
+ smc #0
ldmfd sp!, {r1-r12, pc}
END(omap_modify_auxcoreboot0)
@@ -60,6 +60,6 @@
stmfd sp!, {r2-r12, lr}
ldr r12, =0x105
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
index 89bb2b1..f61c777 100644
--- a/arch/arm/mach-omap2/omap44xx-smc.S
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -27,6 +27,6 @@
mov r12, r0
mov r0, r1
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_smc1)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c664947..e436dcb 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1511,6 +1511,9 @@
c = oh->slaves[oh->_mpu_port_index]->_clk;
}
+ if (!c->clkdm)
+ return NULL;
+
return c->clkdm->pwrdm.ptr;
}
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 9a0fb38..ebfce7d 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -222,7 +222,7 @@
{
struct powerdomain **p = NULL;
- if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP2_PM_PWSTST;
} else if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 9537f6f..07a60f1 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -123,7 +123,7 @@
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
if (cpu_is_omap44xx())
return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
@@ -157,7 +157,7 @@
else
WARN_ON(1);
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index da77930..3771254 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -115,7 +115,6 @@
}
};
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
@@ -128,23 +127,12 @@
}
};
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
- serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-#else
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-}
-#endif
-
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
- if (cpu_is_omap3630() || cpu_is_omap44xx())
- omap2_set_globals_uart4(omap2_globals);
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static inline unsigned int __serial_read_reg(struct uart_port *up,
@@ -550,7 +538,7 @@
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
- printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ dev_err(dev, "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
@@ -664,27 +652,33 @@
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
+ /* Don't map zero-based physical address */
+ if (p->mapbase == 0) {
+ dev_warn(dev, "no physical address for uart#%d,"
+ " so skipping early_init...\n", i);
+ continue;
+ }
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
- printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+ dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
- printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
+ dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
- printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
+ dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
@@ -727,6 +721,13 @@
pdev = &uart->pdev;
dev = &pdev->dev;
+ /* Don't proceed if there's no clocks available */
+ if (unlikely(!uart->ick || !uart->fck)) {
+ WARN(1, "%s: can't init uart%d, no clocks available\n",
+ kobject_name(&dev->kobj), port);
+ return;
+ }
+
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index f2dbce5..d5a9573 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -254,7 +254,7 @@
else
mask = 2;
- return readl(REALVIEW_SYSMCI) & mask;
+ return !(readl(REALVIEW_SYSMCI) & mask);
}
struct mmci_platform_data realview_mmc0_plat_data = {
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index edddd66..a2ab51f 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -166,15 +166,15 @@
THUMB( "1: "ins" %1, [%2]\n" ) \
THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, #1\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (val), "=r" (addr) \
: "0" (err), "2" (addr))
@@ -226,16 +226,16 @@
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, #1\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
@@ -266,18 +266,18 @@
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"6: mov %0, #1\n" \
" b 5b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 6b\n" \
" .long 2b, 6b\n" \
" .long 3b, 6b\n" \
" .long 4b, 6b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index ee77002..5c47760 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -45,7 +45,7 @@
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
- .previous
+ .section .text
/*
* cpu_sa1100_proc_fin()
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index 48bca0d..cafa183 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -111,12 +111,12 @@
@ to fault. Emit the appropriate exception gunk to fix things up.
@ ??? For some reason, faults can happen at .Lx2 even with a
@ plain LDR instruction. Weird, but it seems harmless.
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 2
.Lfix: mov pc, r9 @ let the user eat segfaults
- .previous
+ .popsection
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long .Lx1, .Lfix
- .previous
+ .popsection
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 088c1a0..f12f0e3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -44,9 +44,6 @@
#define NO_LENGTH_CHECK 0xffffffff
-unsigned char omap_bootloader_tag[512];
-int omap_bootloader_tag_len;
-
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
@@ -100,10 +97,17 @@
#include <linux/clocksource.h>
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
#else
#define omap16xx_32k_read NULL
@@ -112,7 +116,7 @@
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2420_32k_read NULL
@@ -121,7 +125,7 @@
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2430_32k_read NULL
@@ -130,7 +134,7 @@
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap34xx_32k_read NULL
@@ -139,7 +143,7 @@
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap44xx_32k_read NULL
@@ -227,6 +231,8 @@
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
+ offset_32k = clocksource_32k.read(&clocksource_32k);
+
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 5c6c342..1d95996 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -937,6 +937,15 @@
{
u32 l;
+ /*
+ * The CPC/CDAC register needs to be initialized to zero
+ * before starting dma transfer.
+ */
+ if (cpu_is_omap15xx())
+ dma_write(0, CPC(lch));
+ else
+ dma_write(0, CDAC(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 76a347b..45a225d 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -798,7 +798,7 @@
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
@@ -812,7 +812,7 @@
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
@@ -846,7 +846,7 @@
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index b65088a..4017019 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -345,8 +345,6 @@
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
-#define INT_34XX_BENCH_MPU_EMUL 3
-
#define INT_35XX_HECC0_IRQ 24
#define INT_35XX_HECC1_IRQ 28
#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 3974835..7de903d 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -59,7 +59,7 @@
#define OMAP44XX_MCBSP1_BASE 0x49022000
#define OMAP44XX_MCBSP2_BASE 0x49024000
#define OMAP44XX_MCBSP3_BASE 0x49026000
-#define OMAP44XX_MCBSP4_BASE 0x48074000
+#define OMAP44XX_MCBSP4_BASE 0x48096000
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 6ba88d2..f8efd546 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -29,4 +29,11 @@
/* size (4 KiB) for IO mapping */
#define NAND_IO_SIZE SZ_4K
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index 2302474..b3ef1a7 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -32,7 +32,7 @@
#define OMAP4430_PRM_BASE 0x4a306000
#define OMAP44XX_GPMC_BASE 0x50000000
#define OMAP443X_SCM_BASE 0x4a002000
-#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP443X_CTRL_BASE 0x4a100000
#define OMAP44XX_IC_BASE 0x48200000
#define OMAP44XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 440b416..36d6ea5 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -294,8 +294,8 @@
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
+ u16 sysc_flags;
u8 idlemodes;
- u8 sysc_flags;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 568578d..876ca8d 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -46,7 +46,7 @@
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
- u8 power;
+ u16 power;
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index dd5b882..5e73c25 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -28,7 +28,7 @@
THREAD_SIZE - sizeof(struct pt_regs));
}
-static void user_enable_single_step(struct task_struct *tsk)
+void user_enable_single_step(struct task_struct *tsk)
{
pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 73c5c2b0..7f3c0a2 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1802,7 +1802,8 @@
{
struct kvm_memory_slot *memslot;
int r, i;
- long n, base;
+ long base;
+ unsigned long n;
unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
@@ -1815,7 +1816,7 @@
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
base = memslot->base_gfn / BITS_PER_LONG;
for (i = 0; i < n/sizeof(long); ++i) {
@@ -1831,7 +1832,7 @@
struct kvm_dirty_log *log)
{
int r;
- int n;
+ unsigned long n;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
@@ -1850,7 +1851,7 @@
if (is_dirty) {
kvm_flush_remote_tlbs(kvm);
memslot = &kvm->memslots->memslots[log->slot];
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index ef22938..01a8716 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -212,5 +212,10 @@
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
+#if defined(CONFIG_M5272)
+#define MCFUART_TXFIFOSIZE 25
+#else
+#define MCFUART_TXFIFOSIZE 1
+#endif
/****************************************************************************/
#endif /* mcfuart_h */
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index ce404bc..1404257 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -94,7 +94,7 @@
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
-cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5271,-m5200)
+cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index 56043ad..aff6f57 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -145,6 +145,6 @@
trap #0
ENTRY(ret_from_user_rt_signal)
- move #__NR_rt_sigreturn,%d0
+ movel #__NR_rt_sigreturn,%d0
trap #0
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index 1143f77..6f22970 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -107,7 +107,6 @@
_ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
_ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
_ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
- _ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* reserved */
_ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
_ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
_ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 29e8692..7e6fd1c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -49,7 +49,7 @@
family: TNETD7100, 7200 and 7300.
config BCM47XX
- bool "BCM47XX based boards"
+ bool "Broadcom BCM47XX based boards"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
@@ -509,6 +509,7 @@
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@@ -523,6 +524,7 @@
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@@ -1305,6 +1307,33 @@
endchoice
+if CPU_LOONGSON2F
+config CPU_NOP_WORKAROUNDS
+ bool
+
+config CPU_JUMP_WORKAROUNDS
+ bool
+
+config CPU_LOONGSON2F_WORKAROUNDS
+ bool "Loongson 2F Workarounds"
+ default y
+ select CPU_NOP_WORKAROUNDS
+ select CPU_JUMP_WORKAROUNDS
+ help
+ Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
+ require workarounds. Without workarounds the system may hang
+ unexpectedly. For more information please refer to the gas
+ -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
+
+ Loongson 2F03 and later have fixed these issues and no workarounds
+ are needed. The workarounds have no significant side effect on them
+ but may decrease the performance of the system so this option should
+ be disabled unless the kernel is intended to be run on 2F01 or 2F02
+ systems.
+
+ If unsure, please say Y.
+endif # CPU_LOONGSON2F
+
config SYS_SUPPORTS_ZBOOT
bool
select HAVE_KERNEL_GZIP
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 2f2eac2..0b9c01a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -136,6 +136,19 @@
$(call cc-option,-march=loongson2e,-march=r4600)
cflags-$(CONFIG_CPU_LOONGSON2F) += \
$(call cc-option,-march=loongson2f,-march=r4600)
+# enable the workarounds for loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+ else
+ cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+ endif
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+ else
+ cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+ endif
+endif
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index be7e92e..8876195 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -66,12 +66,16 @@
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
- /* do not autoenable these: CPLD has broken edge int handling,
- * and the CD handler setup requires manual enabling to work
- * around that.
+ /* insert/eject pairs: one of both is always screaming. To avoid
+ * issues they must not be automatically enabled when initially
+ * requested.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
return 0;
}
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 7fee027..6389ca0 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Sun May 31 20:17:18 2009
+# Linux kernel version: 2.6.34-rc2
+# Tue Mar 23 10:36:32 2010
#
CONFIG_MIPS=y
@@ -9,13 +9,14 @@
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
@@ -45,13 +47,17 @@
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
#
# CPU support
#
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
CONFIG_BCM63XX_CPU_6348=y
CONFIG_BCM63XX_CPU_6358=y
CONFIG_BOARD_BCM963XX=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -69,10 +75,8 @@
CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
@@ -85,7 +89,8 @@
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -128,7 +133,7 @@
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -146,9 +151,8 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
@@ -170,6 +174,7 @@
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -189,15 +194,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -205,11 +207,11 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -223,6 +225,10 @@
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
@@ -231,14 +237,17 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -246,14 +255,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -263,15 +299,12 @@
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -295,6 +328,7 @@
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
@@ -333,6 +367,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -347,6 +382,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -359,7 +395,27 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -471,6 +527,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -484,13 +541,16 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -529,6 +589,7 @@
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -541,17 +602,48 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_BCM63XX_ENET=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_PIO=y
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -574,6 +666,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -607,6 +700,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
@@ -629,6 +723,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -636,6 +735,8 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@@ -644,16 +745,21 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -662,15 +768,16 @@
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-# CONFIG_SSB_DRIVER_PCICORE is not set
+CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_MIPS is not set
#
@@ -680,27 +787,15 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -710,11 +805,7 @@
#
# Display device support
#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -741,13 +832,14 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
@@ -796,7 +888,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -807,8 +898,8 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -819,7 +910,29 @@
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
@@ -827,6 +940,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -838,12 +955,16 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -875,8 +996,6 @@
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
@@ -888,6 +1007,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -898,7 +1018,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -906,7 +1025,46 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
@@ -918,29 +1076,23 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_CMDLINE_OVERRIDE is not set
@@ -951,8 +1103,108 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index ed9aaaaf..2d28017 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -16,7 +16,7 @@
({ \
__typeof(*(m)) __ret; \
\
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 1cf7b14..fcdbe3a 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -307,7 +307,7 @@
*/
#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
s##_WIN##w##_BASE = (src); \
- s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+ s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
s##_WIN##w##_MASK = ~(size-1); \
} while (0)
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 26dc69d..1be4b0f 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -120,9 +120,14 @@
#endif
#define FIRST_USER_ADDRESS 0UL
-#define VMALLOC_START MAP_BASE
+/*
+ * TLB refill handlers also map the vmalloc area into xuseg. Avoid
+ * the first couple of pages so NULL pointer dereferences will still
+ * reliably trap.
+ */
+#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE))
#define VMALLOC_END \
- (VMALLOC_START + \
+ (MAP_BASE + \
min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
(1UL << cpu_vmbits)) - (1UL << 32))
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index ce47118..cdc6a46 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -142,9 +142,9 @@
extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
-extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
-static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
{
if (unlikely(!user_mode(regs)))
die(str, regs);
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index c841912..58730c5 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -121,7 +121,7 @@
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
-#ifdef CONFIG_CPU_LOONGSON2F
+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
/*
* Clear BTB (branch target buffer), forbid RAS (return address
* stack) to workaround the Out-of-order Issue in Loongson2F
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 11a8b52..697e40c 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -167,6 +167,24 @@
#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsrl(p, a1, a2, a3);
+ else
+ uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
+static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsll(p, a1, a2, a3);
+ else
+ uasm_i_dsll32(p, a1, a2, a3 - 32);
+}
+
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index 7043f6b..0d0f054 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -76,15 +76,9 @@
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
- 0, 0, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig_video_page */
- 0, /* orig_video_mode */
- 160, /* orig_video_cols */
- 0, 0, 0, /* unused, ega_bx, unused */
- 64, /* orig_video_lines */
- 0, /* orig_video_isVGA */
- 16 /* orig_video_points */
+ .orig_video_cols = 160,
+ .orig_video_lines = 64,
+ .orig_video_points = 16,
};
#endif
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 1a4dd65..d612c6d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -352,9 +352,10 @@
static DEFINE_SPINLOCK(die_lock);
-void __noreturn die(const char * str, const struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
{
static int die_counter;
+ int sig = SIGSEGV;
#ifdef CONFIG_MIPS_MT_SMTC
unsigned long dvpret = dvpe();
#endif /* CONFIG_MIPS_MT_SMTC */
@@ -365,6 +366,10 @@
#ifdef CONFIG_MIPS_MT_SMTC
mips_mt_regdump(dvpret);
#endif /* CONFIG_MIPS_MT_SMTC */
+
+ if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+ sig = 0;
+
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
@@ -379,7 +384,7 @@
panic("Fatal exception");
}
- do_exit(SIGSEGV);
+ do_exit(sig);
}
extern struct exception_table_entry __start___dbe_table[];
@@ -1557,12 +1562,7 @@
void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
unsigned long size)
{
-#ifdef CONFIG_32BIT
- unsigned long uncached_ebase = KSEG1ADDR(ebase);
-#endif
-#ifdef CONFIG_64BIT
- unsigned long uncached_ebase = TO_UNCAC(ebase);
-#endif
+ unsigned long uncached_ebase = CKSEG1ADDR(ebase);
if (!addr)
panic(panic_null_cerr);
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 853f184..81fbe6b 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -24,7 +24,7 @@
[MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box",
[MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches",
[MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches",
- [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches",
+ [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f",
[MACH_LEMOTE_NAS] "lemote-nas-2f",
[MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
[MACH_LOONGSON_END] NULL,
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index ec2f796..30eba60 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -75,7 +75,7 @@
unsigned long end = offset + size;
if (__uncached_access(file, offset)) {
- if (((uca_start && offset) >= uca_start) &&
+ if (uca_start && (offset >= uca_start) &&
(end <= uca_end))
return __pgprot((pgprot_val(vma_prot) &
~_CACHE_MASK) |
@@ -96,7 +96,7 @@
return 0;
for_each_pci_dev(dev) {
- if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
r = &dev->resource[idx];
if (!r->start && r->end)
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 4bd9c18..9e10d62 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -16,13 +16,31 @@
#include <loongson.h>
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+ ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+ void (*func)(void);
+
+ func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+ __asm__ __volatile__(
+ " .set noat \n"
+ " jr %[func] \n"
+ " .set at \n"
+ : /* No outputs */
+ : [func] "r" (func));
+#endif
+}
+
static void loongson_restart(char *command)
{
/* do preparation for reboot */
mach_prepare_reboot();
/* reboot via jumping to boot base address */
- ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+ loongson_reboot();
}
static void loongson_poweroff(void)
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
index 4cd2aa9..27d826b 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson/common/setup.c
@@ -41,15 +41,12 @@
conswitchp = &vga_con;
screen_info = (struct screen_info) {
- 0, 25, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig-video-page */
- 0, /* orig-video-mode */
- 80, /* orig-video-cols */
- 0, 0, 0, /* ega_ax, ega_bx, ega_cx */
- 25, /* orig-video-lines */
- VIDEO_TYPE_VGAC, /* orig-video-isVGA */
- 16 /* orig-video-points */
+ .orig_x = 0,
+ .orig_y = 25,
+ .orig_video_cols = 80,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = VIDEO_TYPE_VGAC,
+ .orig_video_points = 16,
};
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 882dfcd4..1d8b4d2 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -79,7 +79,7 @@
if (pending & CAUSEF_IP7)
do_IRQ(LOONGSON_TIMER_IRQ);
else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
-#ifdef CONFIG_OPROFILE
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
do_IRQ(LOONGSON2_PERFCNT_IRQ);
#endif
bonito_irqdispatch();
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index d1f68aa..86f004d 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -31,6 +31,16 @@
#include <asm/war.h>
#include <asm/uasm.h>
+/*
+ * TLB load/store/modify handlers.
+ *
+ * Only the fastpath gets synthesized at runtime, the slowpath for
+ * do_page_fault remains normal asm.
+ */
+extern void tlb_do_page_fault_0(void);
+extern void tlb_do_page_fault_1(void);
+
+
static inline int r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
@@ -83,6 +93,7 @@
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
+ label_large_segbits_fault,
#ifdef CONFIG_HUGETLB_PAGE
label_tlb_huge_update,
#endif
@@ -101,6 +112,7 @@
UASM_L_LA(_nopage_tlbm)
UASM_L_LA(_smp_pgtable_change)
UASM_L_LA(_r3000_write_probe_fail)
+UASM_L_LA(_large_segbits_fault)
#ifdef CONFIG_HUGETLB_PAGE
UASM_L_LA(_tlb_huge_update)
#endif
@@ -157,6 +169,10 @@
static struct uasm_label labels[128] __cpuinitdata;
static struct uasm_reloc relocs[128] __cpuinitdata;
+#ifdef CONFIG_64BIT
+static int check_for_high_segbits __cpuinitdata;
+#endif
+
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
@@ -408,7 +424,7 @@
UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
#ifdef CONFIG_64BIT_PHYS_ADDR
- uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
+ uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
#else
UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
#endif
@@ -532,7 +548,24 @@
* The vmalloc handling is not in the hotpath.
*/
uasm_i_dmfc0(p, tmp, C0_BADVADDR);
- uasm_il_bltz(p, r, tmp, label_vmalloc);
+
+ if (check_for_high_segbits) {
+ /*
+ * The kernel currently implicitely assumes that the
+ * MIPS SEGBITS parameter for the processor is
+ * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
+ * allocate virtual addresses outside the maximum
+ * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
+ * that doesn't prevent user code from accessing the
+ * higher xuseg addresses. Here, we make sure that
+ * everything but the lower xuseg addresses goes down
+ * the module_alloc/vmalloc path.
+ */
+ uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+ uasm_il_bnez(p, r, ptr, label_vmalloc);
+ } else {
+ uasm_il_bltz(p, r, tmp, label_vmalloc);
+ }
/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
@@ -549,14 +582,14 @@
* SMTC uses TCBind value as "CPU" index
*/
uasm_i_mfc0(p, ptr, C0_TCBIND);
- uasm_i_dsrl(p, ptr, ptr, 19);
+ uasm_i_dsrl_safe(p, ptr, ptr, 19);
# else
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
uasm_i_dmfc0(p, ptr, C0_CONTEXT);
- uasm_i_dsrl(p, ptr, ptr, 23);
+ uasm_i_dsrl_safe(p, ptr, ptr, 23);
# endif
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_daddu(p, ptr, ptr, tmp);
@@ -569,44 +602,78 @@
uasm_l_vmalloc_done(l, *p);
- if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */
- uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
- else
- uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
+ /* get pgd offset in bytes */
+ uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
#ifndef __PAGETABLE_PMD_FOLDED
uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
- uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
+ uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
#endif
}
+enum vmalloc64_mode {not_refill, refill};
/*
* BVADDR is the faulting address, PTR is scratch.
* PTR will hold the pgd for vmalloc.
*/
static void __cpuinit
build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
- unsigned int bvaddr, unsigned int ptr)
+ unsigned int bvaddr, unsigned int ptr,
+ enum vmalloc64_mode mode)
{
long swpd = (long)swapper_pg_dir;
+ int single_insn_swpd;
+ int did_vmalloc_branch = 0;
+
+ single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
uasm_l_vmalloc(l, *p);
- if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
- uasm_il_b(p, r, label_vmalloc_done);
- uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
- } else {
- UASM_i_LA_mostly(p, ptr, swpd);
- uasm_il_b(p, r, label_vmalloc_done);
- if (uasm_in_compat_space_p(swpd))
- uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
- else
- uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ if (mode == refill && check_for_high_segbits) {
+ if (single_insn_swpd) {
+ uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
+ uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+ did_vmalloc_branch = 1;
+ /* fall through */
+ } else {
+ uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
+ }
+ }
+ if (!did_vmalloc_branch) {
+ if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
+ uasm_il_b(p, r, label_vmalloc_done);
+ uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+ } else {
+ UASM_i_LA_mostly(p, ptr, swpd);
+ uasm_il_b(p, r, label_vmalloc_done);
+ if (uasm_in_compat_space_p(swpd))
+ uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ else
+ uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ }
+ }
+ if (mode == refill && check_for_high_segbits) {
+ uasm_l_large_segbits_fault(l, *p);
+ /*
+ * We get here if we are an xsseg address, or if we are
+ * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
+ *
+ * Ignoring xsseg (assume disabled so would generate
+ * (address errors?), the only remaining possibility
+ * is the upper xuseg addresses. On processors with
+ * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
+ * addresses would have taken an address error. We try
+ * to mimic that here by taking a load/istream page
+ * fault.
+ */
+ UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
+ uasm_i_jr(p, ptr);
+ uasm_i_nop(p);
}
}
@@ -720,9 +787,9 @@
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
- uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+ uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+ uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
}
UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
} else {
@@ -793,9 +860,9 @@
uasm_i_dmfc0(&p, K0, C0_BADVADDR);
uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- uasm_i_dsrl32(&p, K1, K0, 62 - 32);
- uasm_i_dsrl(&p, K0, K0, 12 + 1);
- uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_dsrl_safe(&p, K1, K0, 62);
+ uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+ uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
@@ -825,7 +892,7 @@
#endif
#ifdef CONFIG_64BIT
- build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
+ build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
#endif
/*
@@ -935,15 +1002,6 @@
}
/*
- * TLB load/store/modify handlers.
- *
- * Only the fastpath gets synthesized at runtime, the slowpath for
- * do_page_fault remains normal asm.
- */
-extern void tlb_do_page_fault_0(void);
-extern void tlb_do_page_fault_1(void);
-
-/*
* 128 instructions for the fastpath handler is generous and should
* never be exceeded.
*/
@@ -1302,7 +1360,7 @@
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
- build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
+ build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
#endif
}
@@ -1322,9 +1380,9 @@
uasm_i_dmfc0(&p, K0, C0_BADVADDR);
uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- uasm_i_dsrl32(&p, K1, K0, 62 - 32);
- uasm_i_dsrl(&p, K0, K0, 12 + 1);
- uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_dsrl_safe(&p, K1, K0, 62);
+ uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+ uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
@@ -1526,6 +1584,10 @@
*/
static int run_once = 0;
+#ifdef CONFIG_64BIT
+ check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+#endif
+
switch (current_cpu_type()) {
case CPU_R2000:
case CPU_R3000:
diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c
index 76bc3ec..fadd8744 100644
--- a/arch/mips/nxp/pnx8550/common/reset.c
+++ b/arch/mips/nxp/pnx8550/common/reset.c
@@ -20,6 +20,8 @@
* Reset the PNX8550 board.
*
*/
+#include <linux/kernel.h>
+
#include <asm/reboot.h>
#include <glb.h>
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index ada24e6..1711e8e 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -37,6 +37,7 @@
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/tty.h>
+#include <linux/vt.h>
#include <asm/io.h>
@@ -254,7 +255,7 @@
* XXX ehs: Should this happen in PCI Device mode?
*/
io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
- sb1250_controller.io_map_base = io_map_base;
+ sb1250_controller.io_map_base = (unsigned long)io_map_base;
set_io_port_base((unsigned long)io_map_base);
#ifdef CONFIG_SIBYTE_HAS_LDT
diff --git a/arch/mips/sgi-ip22/ip22-berr.c b/arch/mips/sgi-ip22/ip22-berr.c
index de6a0cc..911d399 100644
--- a/arch/mips/sgi-ip22/ip22-berr.c
+++ b/arch/mips/sgi-ip22/ip22-berr.c
@@ -89,7 +89,7 @@
void ip22_be_interrupt(int irq)
{
const int field = 2 * sizeof(unsigned long);
- const struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = get_irq_regs();
save_and_clear_buserr();
print_buserr();
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 30e12e2..88c684e 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -453,7 +453,7 @@
void ip22_be_interrupt(int irq)
{
- const struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = get_irq_regs();
count_be_interrupt++;
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 5277aac..c308989 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -145,15 +145,14 @@
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
- 0, 0, /* orig-x, orig-y */
- 0, /* unused */
- 52, /* orig_video_page */
- 3, /* orig_video_mode */
- 80, /* orig_video_cols */
- 4626, 3, 9, /* unused, ega_bx, unused */
- 25, /* orig_video_lines */
- 0x22, /* orig_video_isVGA */
- 16 /* orig_video_points */
+ .orig_video_page = 52,
+ .orig_video_mode = 3,
+ .orig_video_cols = 80,
+ .flags = 12,
+ .orig_video_ega_bx = 3,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = 0x22,
+ .orig_video_points = 16,
};
/* XXXKW for CFE, get lines/cols from environment */
#endif
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index baa2bbb..04f1626 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:38 2010
#
# CONFIG_PPC64 is not set
@@ -97,14 +97,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -112,6 +106,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -543,6 +537,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -579,6 +575,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -596,6 +593,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -788,6 +786,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -836,6 +835,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -849,15 +849,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -883,10 +877,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -923,6 +918,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -971,18 +967,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -991,6 +990,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1083,7 +1083,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1096,7 +1095,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1259,6 +1257,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1285,6 +1284,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 8b1aa80..1843ee1 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:39 2010
#
# CONFIG_PPC64 is not set
@@ -98,7 +98,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
@@ -318,6 +317,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@@ -346,7 +346,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -387,6 +386,7 @@
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
@@ -539,6 +539,8 @@
# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -563,6 +565,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -690,6 +693,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -720,6 +724,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -732,15 +737,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -765,18 +764,20 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -805,8 +806,6 @@
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
@@ -887,6 +886,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -911,6 +911,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -976,6 +977,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 2f2d985..78ae3bf 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:15 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -556,6 +550,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -593,6 +589,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -612,6 +609,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -772,6 +770,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -824,6 +823,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -836,6 +837,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -931,6 +933,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -980,6 +983,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -993,15 +997,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -1044,10 +1042,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1086,6 +1085,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1134,21 +1134,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1157,6 +1160,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1289,7 +1293,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1302,7 +1305,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1341,6 +1343,7 @@
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
@@ -1511,6 +1514,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1537,6 +1541,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 633e611..cccb713 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:16 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -556,6 +550,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -593,6 +589,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -612,6 +609,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -735,6 +733,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -837,6 +836,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -889,6 +889,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -901,6 +903,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -996,6 +999,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1045,6 +1049,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1058,15 +1063,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -1109,10 +1108,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1151,6 +1151,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1199,21 +1200,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1222,6 +1226,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1354,7 +1359,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1367,7 +1371,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1406,6 +1409,7 @@
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
@@ -1576,6 +1580,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1602,6 +1607,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 0b4262b..74cb27a 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:17 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:41 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -457,6 +451,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -492,6 +488,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -509,6 +506,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -693,6 +691,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -705,6 +705,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -790,6 +791,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -839,6 +841,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -851,15 +854,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -885,10 +882,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -925,6 +923,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -967,18 +966,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -987,6 +989,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1171,6 +1174,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1197,6 +1201,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 155af00..10412a9 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:18 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:42 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -457,6 +451,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -494,6 +490,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -514,6 +511,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -700,6 +698,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -712,6 +712,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -808,6 +809,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -859,6 +861,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -872,15 +875,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -922,10 +919,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -964,6 +962,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1012,21 +1011,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1035,6 +1037,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1166,7 +1169,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1179,7 +1181,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1204,8 +1205,6 @@
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_CB710 is not set
@@ -1298,6 +1297,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1324,6 +1324,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index ff45f49..7b31fc3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:19 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:43 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -540,6 +534,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -577,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -644,6 +641,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -767,6 +765,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -880,6 +879,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -892,6 +893,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -966,6 +968,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1015,6 +1018,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1028,15 +1032,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -1095,21 +1093,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1118,6 +1119,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1222,7 +1224,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1235,7 +1236,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1399,6 +1399,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1425,6 +1426,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 28d8ff3..41401a9 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:20 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:44 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -540,6 +534,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -577,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -596,6 +593,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -756,6 +754,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -768,6 +768,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -842,6 +843,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -891,6 +893,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -904,15 +907,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -971,21 +968,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -994,6 +994,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1098,7 +1099,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1111,7 +1111,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1275,6 +1274,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1301,6 +1301,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 6252ab5..dc176b6 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:45 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -456,6 +450,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -491,6 +487,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -508,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -580,6 +578,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -631,6 +630,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -643,6 +644,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -726,6 +728,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -774,6 +777,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -786,15 +790,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -820,10 +818,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -860,6 +859,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -902,18 +902,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -922,6 +925,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1106,6 +1110,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1132,6 +1137,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 7822737..f512972 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:46 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -323,6 +318,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -334,7 +330,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -360,7 +355,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -538,6 +532,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -573,6 +569,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -590,6 +587,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -774,6 +772,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -786,6 +786,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -871,6 +872,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -920,6 +922,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -932,15 +935,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -966,10 +963,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1006,6 +1004,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1048,18 +1047,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1068,6 +1070,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1253,6 +1256,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1279,6 +1283,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 9451d6e..77abfe8 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:23 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
#
# CONFIG_PPC64 is not set
@@ -97,14 +97,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -112,6 +106,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -323,6 +318,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -550,6 +544,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -587,6 +583,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -606,6 +603,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -774,6 +772,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -825,6 +824,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -837,15 +837,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -876,14 +870,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -932,22 +930,27 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -956,6 +959,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1145,6 +1149,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1171,6 +1176,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f67b70d..0cdb414 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:22 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -456,6 +450,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -491,6 +487,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -508,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -631,6 +629,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -755,6 +754,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -767,6 +768,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -851,6 +853,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -901,6 +904,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -913,15 +917,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -947,10 +945,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +986,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1029,18 +1029,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1049,6 +1052,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1175,6 +1179,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1201,6 +1206,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a84fd11..e69ed1b 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:24 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:48 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -451,6 +445,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -487,6 +483,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -504,6 +501,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -626,6 +624,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -850,6 +849,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -900,6 +900,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -913,15 +914,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -947,10 +942,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +983,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1034,18 +1031,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1054,6 +1054,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1079,6 +1080,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1094,14 +1096,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1190,7 +1197,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1203,7 +1209,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1297,6 +1302,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1323,6 +1329,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 72c2067..56e3995 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:25 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:49 2010
#
# CONFIG_PPC64 is not set
@@ -96,14 +96,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -322,6 +317,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -333,7 +329,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -359,7 +354,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -537,6 +531,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -573,6 +569,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -590,6 +587,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -812,6 +810,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -862,6 +861,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -875,15 +875,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -909,10 +903,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -949,6 +944,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -996,18 +992,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1016,6 +1015,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1140,7 +1140,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1153,7 +1152,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1245,6 +1243,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1271,6 +1270,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 21dad38..f67a8d1 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:26 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:50 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,10 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -110,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -315,6 +318,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -345,7 +349,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -522,6 +525,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
@@ -575,6 +580,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -701,6 +707,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -732,6 +739,7 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
#
@@ -915,6 +923,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -937,6 +946,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1036,6 +1046,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 5db54cd..61b122a 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:27 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:51 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -316,6 +315,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -346,7 +346,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -443,6 +442,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -477,6 +478,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -602,6 +604,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -788,6 +791,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -810,6 +814,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 76c7018..a5ceaa4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:28 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:52 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,14 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -319,6 +318,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -329,7 +329,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -358,7 +357,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -455,6 +453,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
@@ -500,6 +500,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -609,6 +610,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -621,6 +624,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -700,6 +704,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -733,7 +738,9 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@@ -793,6 +800,8 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -801,6 +810,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -927,6 +937,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -949,6 +960,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index fab8ada..4adb4eb 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:53 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -317,6 +316,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -327,7 +327,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -356,7 +355,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -453,6 +451,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -552,6 +552,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -657,6 +658,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -669,6 +672,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -753,6 +757,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -817,6 +822,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -825,6 +831,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -951,6 +958,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -973,6 +981,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 8290385..3de8450 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -314,6 +313,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -324,7 +324,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -352,7 +351,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -447,6 +445,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -491,6 +491,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -596,6 +597,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -608,6 +611,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -692,6 +696,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -756,6 +761,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -764,6 +770,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -856,6 +863,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -878,6 +886,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 2499b5b..bd467fe 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:30 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -314,6 +313,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -344,7 +344,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -441,6 +440,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -475,6 +476,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -600,6 +602,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -815,6 +818,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -837,6 +841,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index e2edb79..9803e03 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:31 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:55 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -319,6 +318,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -329,7 +329,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -355,7 +354,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -554,6 +552,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@@ -591,6 +591,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -610,6 +611,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -867,6 +869,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -916,6 +919,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -929,15 +933,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -979,10 +977,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1021,6 +1020,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1050,21 +1050,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1073,6 +1076,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1180,6 +1184,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
@@ -1194,12 +1199,16 @@
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1307,7 +1316,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1320,7 +1328,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1491,6 +1498,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1515,6 +1523,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index ce31325..880ab7aa 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:32 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:56 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,14 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -324,6 +323,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -334,7 +334,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -363,7 +362,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -520,6 +518,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
@@ -563,6 +563,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -630,6 +631,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
@@ -817,6 +819,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -829,6 +833,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -947,6 +952,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1004,6 +1010,7 @@
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1017,15 +1024,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1041,14 +1042,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1081,10 +1086,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1122,6 +1128,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1155,9 +1162,10 @@
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1166,6 +1174,7 @@
#
CONFIG_AGP=m
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
@@ -1308,6 +1317,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1333,6 +1343,7 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 0824b46..230aa2f 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:33 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:57 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -315,6 +314,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -325,7 +325,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -351,7 +350,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -525,6 +523,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -560,6 +560,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -632,6 +633,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -704,6 +706,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -755,6 +758,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -767,6 +772,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -851,6 +857,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -902,6 +909,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -913,15 +921,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -947,10 +949,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +990,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1015,18 +1019,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1035,6 +1042,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1172,6 +1180,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1194,6 +1203,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 2137be4..dbe04b9 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:34 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:58 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,14 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -636,6 +637,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -760,6 +763,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -772,6 +777,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -946,14 +948,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -986,10 +992,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1076,6 +1089,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 5cc89aa..845efa7 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:35 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:59 2010
#
# CONFIG_PPC64 is not set
@@ -67,6 +67,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -98,14 +102,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -324,6 +323,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -339,7 +339,6 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -368,7 +367,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -559,6 +557,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -594,6 +594,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -611,6 +612,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -716,6 +718,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -728,6 +732,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -812,6 +817,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -860,6 +866,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -872,15 +879,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -906,10 +907,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -946,6 +948,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -974,18 +977,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -994,6 +1000,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1162,6 +1169,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1184,6 +1192,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index e7b9148..b958136 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:00 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,14 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -636,6 +637,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -760,6 +763,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -772,6 +777,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -946,14 +948,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -986,10 +992,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1076,6 +1089,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a998e40..008bc97 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -99,14 +103,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -636,6 +637,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -760,6 +763,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -772,6 +777,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -946,14 +948,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -986,10 +992,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1076,6 +1089,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index fc656af..2cf80db 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:37 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
#
# CONFIG_PPC64 is not set
@@ -69,6 +69,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -104,10 +108,8 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -115,6 +117,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -328,6 +331,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -343,7 +347,6 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -375,7 +378,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -600,6 +602,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -637,6 +641,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -654,6 +659,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -777,6 +783,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -1004,6 +1011,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1053,6 +1061,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1066,15 +1075,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1090,14 +1093,19 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1130,10 +1138,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1171,6 +1180,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1218,19 +1228,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1239,6 +1254,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1271,6 +1287,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
@@ -1285,12 +1302,16 @@
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1386,7 +1407,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1398,7 +1418,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1423,11 +1442,11 @@
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1506,6 +1525,7 @@
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
@@ -1614,6 +1634,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1641,6 +1662,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1851,6 +1873,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 622d84f..183c59c 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:43 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:07 2010
#
# CONFIG_PPC64 is not set
@@ -102,11 +102,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -117,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -325,6 +321,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -340,13 +337,11 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
@@ -382,7 +377,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -592,6 +586,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -629,6 +625,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
@@ -695,6 +692,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -819,6 +817,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -1059,6 +1058,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1116,6 +1116,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1129,15 +1130,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1152,14 +1147,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1192,10 +1191,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1233,6 +1233,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1281,19 +1282,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1302,6 +1308,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1334,6 +1341,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1349,14 +1357,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1463,7 +1476,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1476,7 +1488,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1560,43 +1571,35 @@
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
-# CONFIG_ME4000 is not set
-# CONFIG_MEILHAUS is not set
# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_INPUT_MIMIO is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set
#
-# Android
-#
-# CONFIG_ANDROID is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_B3DFG is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_HECI is not set
-# CONFIG_USB_CPC is not set
-
-#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
-# CONFIG_HYPERV_STORAGE is not set
-# CONFIG_HYPERV_BLOCK is not set
-# CONFIG_HYPERV_NET is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
+# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=y
#
@@ -1605,6 +1608,24 @@
# CONFIG_VME_USER is not set
#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1693,6 +1714,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1719,6 +1741,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1864,6 +1887,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index eb58dec..1524d94 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:05 2010
#
# CONFIG_PPC64 is not set
@@ -102,11 +102,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -117,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -325,6 +321,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -340,13 +337,11 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
@@ -382,7 +377,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -592,6 +586,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -629,6 +625,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
@@ -695,6 +692,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -1001,6 +999,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1058,6 +1057,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1071,15 +1071,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1094,14 +1088,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1134,10 +1132,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1175,6 +1174,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1223,19 +1223,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1244,6 +1249,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1276,6 +1282,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1291,14 +1298,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1405,7 +1417,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1418,7 +1429,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1590,6 +1600,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1616,6 +1627,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1761,6 +1773,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 62c2b81..767c204 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:42 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:06 2010
#
# CONFIG_PPC64 is not set
@@ -102,11 +102,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -117,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -326,6 +322,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -341,7 +338,6 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -369,7 +365,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -552,6 +547,7 @@
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
@@ -728,6 +724,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -765,6 +763,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
@@ -782,6 +781,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -905,6 +905,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -1155,6 +1156,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1204,6 +1206,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1217,15 +1220,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1241,14 +1238,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1281,10 +1282,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1322,6 +1324,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1370,19 +1373,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1391,6 +1399,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1423,6 +1432,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1438,14 +1448,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1552,7 +1567,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1565,7 +1579,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
@@ -1650,29 +1663,29 @@
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
-# CONFIG_ME4000 is not set
-# CONFIG_MEILHAUS is not set
# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_INPUT_MIMIO is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set
#
-# Android
+# Qualcomm MSM Camera And Video
#
-# CONFIG_ANDROID is not set
-# CONFIG_DST is not set
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
# CONFIG_POHMELFS is not set
-# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_HECI is not set
# CONFIG_VT6655 is not set
-# CONFIG_USB_CPC is not set
-# CONFIG_RDC_17F3101X is not set
+# CONFIG_VT6656 is not set
CONFIG_VME_BUS=y
#
@@ -1687,6 +1700,22 @@
# CONFIG_VME_USER is not set
#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1772,6 +1801,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1798,6 +1828,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1870,7 +1901,7 @@
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
@@ -2006,6 +2037,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index aab3bae..55b9e4e 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:39 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:03 2010
#
# CONFIG_PPC64 is not set
@@ -97,11 +97,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -112,6 +107,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -320,6 +316,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -335,7 +332,6 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -362,7 +358,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -571,6 +566,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -605,6 +602,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -670,6 +668,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -792,6 +791,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -970,6 +970,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1017,6 +1018,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1029,15 +1031,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1062,18 +1058,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1082,6 +1081,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1434,6 +1434,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1461,6 +1462,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 727a8c8..1be38eb 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:40 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:04 2010
#
# CONFIG_PPC64 is not set
@@ -97,15 +97,11 @@
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -116,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -326,6 +323,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -337,7 +335,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -365,7 +362,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -498,6 +494,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -534,6 +532,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -551,6 +550,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -675,6 +675,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -799,6 +800,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -811,6 +814,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -920,6 +924,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -968,6 +973,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -981,15 +987,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1014,18 +1014,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1034,6 +1037,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1151,6 +1155,7 @@
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
@@ -1170,6 +1175,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1185,14 +1191,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1300,7 +1311,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1313,7 +1323,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1475,6 +1484,7 @@
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
@@ -1506,6 +1516,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1717,6 +1728,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 4fb04dd..a6300945 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:38 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:02 2010
#
# CONFIG_PPC64 is not set
@@ -101,11 +101,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -116,6 +111,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -327,6 +323,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -342,7 +339,6 @@
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -369,7 +365,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -552,6 +547,7 @@
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
@@ -733,6 +729,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -768,6 +766,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -785,6 +784,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -1024,6 +1024,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1074,6 +1075,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1086,15 +1088,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1120,10 +1116,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1160,6 +1157,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1202,18 +1200,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1222,6 +1223,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1376,6 +1378,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1408,6 +1411,7 @@
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1540,6 +1544,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1618,6 +1623,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 5c1dc76..9f89d5c 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:58 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:22 2010
#
# CONFIG_PPC64 is not set
@@ -91,11 +91,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -307,6 +302,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -336,7 +332,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -505,6 +500,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -516,6 +513,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -664,6 +662,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -802,6 +801,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -826,6 +826,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -924,6 +925,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 72137cd..4ab6074 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:23 2010
#
# CONFIG_PPC64 is not set
@@ -101,11 +101,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -121,6 +116,7 @@
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -147,7 +143,6 @@
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
@@ -158,7 +153,6 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
@@ -357,6 +351,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
@@ -365,7 +360,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -396,7 +390,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -527,6 +520,7 @@
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
@@ -630,6 +624,7 @@
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
@@ -690,7 +685,6 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
@@ -833,6 +827,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
CONFIG_OF_MDIO=y
@@ -867,6 +863,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
@@ -1179,6 +1176,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1231,6 +1229,7 @@
CONFIG_I2C_MV64XXX=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1244,15 +1243,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1278,10 +1271,11 @@
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1318,6 +1312,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1369,9 +1364,9 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1380,6 +1375,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1413,7 +1409,6 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
@@ -1535,6 +1530,7 @@
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
@@ -1549,6 +1545,7 @@
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -1561,7 +1558,6 @@
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1574,7 +1570,6 @@
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
@@ -1611,6 +1606,7 @@
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
@@ -1714,6 +1710,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
@@ -1742,6 +1739,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1817,7 +1815,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1833,9 +1831,11 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
@@ -1880,7 +1880,6 @@
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
@@ -1903,16 +1902,12 @@
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 7910541..81e904e 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
#
# CONFIG_PPC64 is not set
@@ -298,6 +298,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@@ -308,7 +309,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -335,7 +335,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -537,6 +536,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
@@ -566,6 +567,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -671,6 +673,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -683,6 +687,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -737,6 +742,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -765,7 +771,9 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@@ -804,6 +812,8 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -812,6 +822,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -869,6 +880,7 @@
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 58f7ca7..c5af46e 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:00 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
#
# CONFIG_PPC64 is not set
@@ -90,11 +90,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -306,6 +301,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -335,7 +331,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -504,6 +499,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -515,6 +512,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -616,6 +614,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -753,6 +752,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -777,6 +777,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 9a0c981..588a2ad 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:01 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:25 2010
#
# CONFIG_PPC64 is not set
@@ -96,11 +96,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -116,6 +111,7 @@
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -328,6 +324,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -337,7 +334,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -364,7 +360,6 @@
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -433,6 +428,7 @@
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
@@ -665,6 +661,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -700,6 +698,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -717,6 +716,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -840,6 +840,7 @@
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -954,6 +955,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -966,6 +969,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -1082,6 +1086,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1131,6 +1136,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1144,15 +1150,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1178,10 +1178,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1218,6 +1219,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1246,18 +1248,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1266,6 +1271,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1417,6 +1423,7 @@
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
@@ -1430,6 +1437,7 @@
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -1442,7 +1450,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1455,7 +1462,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1620,6 +1626,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1651,6 +1658,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1723,9 +1731,11 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_HAS_IOMEM=y
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 4c2c877..0cbd56f 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:02 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:26 2010
#
# CONFIG_PPC64 is not set
@@ -105,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -311,6 +312,7 @@
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@@ -321,7 +323,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -348,7 +349,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -536,6 +536,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -570,6 +572,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -704,6 +707,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -769,14 +773,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -790,14 +789,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -829,19 +832,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -850,6 +858,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -908,6 +917,7 @@
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -1100,6 +1110,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 9e090f2..c1be261 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:03 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:27 2010
#
# CONFIG_PPC64 is not set
@@ -89,11 +89,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -104,6 +99,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -309,6 +305,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -337,7 +334,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -515,6 +511,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -542,6 +540,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -643,6 +642,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -801,6 +801,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -825,6 +826,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -892,6 +894,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 1315b77..27c63ce 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:04 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:28 2010
#
# CONFIG_PPC64 is not set
@@ -94,11 +94,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,6 +104,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -311,6 +307,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
@@ -319,7 +316,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -345,7 +341,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -440,6 +435,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -484,6 +481,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -605,6 +603,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -696,6 +695,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -750,6 +750,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -762,6 +764,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -846,6 +849,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -910,6 +914,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -918,6 +923,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1044,6 +1050,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1066,6 +1073,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 9073778..6875fb8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:05 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:29 2010
#
# CONFIG_PPC64 is not set
@@ -96,8 +96,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -301,6 +300,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@@ -311,7 +311,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -338,7 +337,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -540,6 +538,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
@@ -569,6 +569,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -674,6 +675,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -686,6 +689,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -797,6 +801,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -825,7 +830,9 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@@ -864,6 +871,8 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -872,6 +881,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -933,6 +943,7 @@
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 05bec48..bbe5ae6 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:30 2010
#
# CONFIG_PPC64 is not set
@@ -98,14 +98,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +107,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -126,7 +121,7 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@@ -331,6 +326,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -344,7 +340,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -370,7 +365,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@@ -560,6 +554,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -597,6 +593,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -614,6 +611,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -712,7 +710,7 @@
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -737,6 +735,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -863,6 +862,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -875,6 +876,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -970,6 +972,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -980,8 +983,6 @@
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1022,6 +1023,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1035,15 +1037,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1058,14 +1054,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1098,10 +1098,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1139,6 +1140,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1186,19 +1188,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1207,6 +1214,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1232,6 +1240,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1247,14 +1256,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1344,7 +1358,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1357,7 +1370,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1372,7 +1384,65 @@
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
@@ -1453,6 +1523,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1479,6 +1550,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 8f35f80..cfebef9 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
#
# CONFIG_PPC64 is not set
@@ -68,6 +68,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -103,14 +107,8 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -118,6 +116,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -334,6 +333,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -345,7 +345,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -376,7 +375,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -509,6 +507,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -546,6 +546,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -563,6 +564,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -687,6 +689,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -817,8 +820,11 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
@@ -829,6 +835,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -941,6 +948,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -993,6 +1001,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1006,15 +1015,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1030,14 +1033,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1069,20 +1076,25 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1091,6 +1103,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1208,6 +1221,7 @@
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
@@ -1227,6 +1241,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1242,14 +1257,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1358,7 +1378,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1371,7 +1390,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1452,6 +1470,7 @@
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
@@ -1554,6 +1573,7 @@
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
@@ -1585,6 +1605,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1730,6 +1751,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 8755ea3..f5451d8 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:07 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
#
# CONFIG_PPC64 is not set
@@ -69,6 +69,10 @@
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -100,18 +104,13 @@
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -119,6 +118,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -338,6 +338,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -349,7 +350,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -380,7 +380,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -513,6 +512,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -550,6 +551,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -567,6 +569,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -691,6 +694,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -821,8 +825,11 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
@@ -833,6 +840,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -945,6 +953,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -997,6 +1006,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1010,15 +1020,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1034,14 +1038,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1073,20 +1081,25 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1095,6 +1108,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1212,6 +1226,7 @@
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
@@ -1231,6 +1246,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1246,14 +1262,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1362,7 +1383,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1375,7 +1395,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1456,6 +1475,7 @@
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
@@ -1558,6 +1578,7 @@
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
@@ -1589,6 +1610,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1734,6 +1756,7 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1806,6 +1829,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3f6b11b..d8d3d1d 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:08 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:32 2010
#
# CONFIG_PPC64 is not set
@@ -89,14 +89,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -305,6 +299,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -333,7 +328,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -425,6 +419,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -456,6 +452,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -607,6 +604,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -795,6 +793,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -819,6 +818,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 41884c9..624eae9 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:33 2010
#
# CONFIG_PPC64 is not set
@@ -98,18 +98,13 @@
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -117,6 +112,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -328,6 +324,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -339,7 +336,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -367,7 +363,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -500,6 +495,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
@@ -537,6 +534,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -554,6 +552,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -678,6 +677,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -802,6 +802,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -814,6 +816,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -923,6 +926,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -972,6 +976,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -985,15 +990,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1009,14 +1008,18 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1048,20 +1051,25 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1070,6 +1078,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1187,6 +1196,7 @@
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
@@ -1206,6 +1216,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1221,14 +1232,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
@@ -1336,7 +1352,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1349,7 +1364,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1512,6 +1526,7 @@
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
@@ -1543,6 +1558,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1754,6 +1770,7 @@
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 6b9e6bd..45bd499 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:10 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:34 2010
#
# CONFIG_PPC64 is not set
@@ -90,14 +90,8 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -313,6 +307,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -342,7 +337,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -515,6 +509,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
@@ -526,6 +522,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -627,6 +624,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -764,6 +762,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -788,6 +787,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 5d06f2c..68c175e 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:11 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:35 2010
#
# CONFIG_PPC64 is not set
@@ -105,6 +105,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -304,6 +305,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@@ -315,7 +317,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -342,7 +343,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -544,6 +544,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
@@ -629,6 +631,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@@ -734,6 +737,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -746,6 +751,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -859,6 +865,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -887,7 +894,9 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@@ -926,6 +935,8 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -934,6 +945,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -996,6 +1008,7 @@
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
@@ -1051,6 +1064,7 @@
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 57ab574..93f4505 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:12 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:36 2010
#
# CONFIG_PPC64 is not set
@@ -97,11 +97,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -117,6 +112,7 @@
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -319,6 +315,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
@@ -327,7 +324,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -354,7 +350,6 @@
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
@@ -533,6 +528,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -569,6 +566,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -640,6 +638,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -761,6 +760,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -854,6 +854,7 @@
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@@ -907,6 +908,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -919,6 +922,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@@ -1016,6 +1020,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1065,6 +1070,7 @@
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -1077,15 +1083,9 @@
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -1111,10 +1111,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1151,6 +1152,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1179,18 +1181,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1199,6 +1204,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1231,6 +1237,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1247,14 +1254,19 @@
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
@@ -1350,7 +1362,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1363,7 +1374,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1516,6 +1526,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1538,6 +1549,7 @@
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1620,9 +1632,11 @@
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 32f7058..3808bc2 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Mon Aug 24 17:38:50 2009
+# Linux kernel version: 2.6.34-rc4
+# Thu Apr 15 11:32:15 2010
#
CONFIG_PPC64=y
@@ -9,6 +9,7 @@
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
+# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
@@ -35,7 +36,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +63,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,14 +90,15 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
@@ -108,6 +113,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -128,21 +134,19 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
@@ -154,12 +158,14 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -180,14 +186,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -226,7 +259,6 @@
#
CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
-# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
@@ -267,7 +299,6 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -276,12 +307,15 @@
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -295,13 +329,12 @@
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
@@ -312,11 +345,15 @@
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
@@ -324,6 +361,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -337,12 +375,12 @@
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -392,6 +430,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -400,6 +439,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -422,7 +462,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
@@ -445,27 +484,30 @@
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
-CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
@@ -481,6 +523,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -491,6 +534,8 @@
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -498,6 +543,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -521,6 +570,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -590,30 +640,27 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +678,7 @@
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
@@ -665,6 +713,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -712,6 +761,8 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -735,7 +786,6 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -841,13 +891,13 @@
CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
@@ -866,6 +916,7 @@
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
@@ -876,17 +927,24 @@
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=m
@@ -901,7 +959,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
@@ -909,7 +967,6 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -923,12 +980,13 @@
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
@@ -995,7 +1053,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1008,7 +1065,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1048,7 +1104,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1077,10 +1135,10 @@
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
@@ -1093,6 +1151,7 @@
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
@@ -1154,6 +1213,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1164,7 +1224,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1181,6 +1240,7 @@
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1237,7 +1297,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1270,6 +1330,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@@ -1292,6 +1353,7 @@
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
@@ -1308,26 +1370,27 @@
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1352,13 +1415,16 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -1374,6 +1440,7 @@
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1402,11 +1469,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index f2f8321..b162580 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:13 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:37 2010
#
# CONFIG_PPC64 is not set
@@ -94,11 +94,6 @@
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -314,6 +309,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@@ -323,7 +319,6 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@@ -349,7 +344,6 @@
# Networking options
#
CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -524,6 +518,8 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -555,6 +551,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -626,6 +623,7 @@
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -846,6 +844,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -895,6 +894,7 @@
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -908,15 +908,9 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -941,18 +935,21 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -961,6 +958,7 @@
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1071,7 +1069,6 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1084,7 +1081,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1251,6 +1247,7 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index e96d52a..53b64be 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -108,8 +108,21 @@
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START))
+/*
+ * On Book-E parts we need __va to parse the device tree and we can't
+ * determine MEMORY_START until then. However we can determine PHYSICAL_START
+ * from information at hand (program counter, TLB lookup).
+ *
+ * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
+ * the other definitions for __va & __pa.
+ */
+#ifdef CONFIG_BOOKE
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#else
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
+#endif
/*
* Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5f306c4..97d4bd9 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -653,6 +653,7 @@
#else
#define OV5_CMO 0x00
#endif
+#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
@@ -706,7 +707,7 @@
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
0,
OV5_CMO,
- 0,
+ OV5_TYPE1_AFFINITY,
0,
0,
0,
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 25da07f..604af29 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -1004,7 +1004,8 @@
struct kvm_vcpu *vcpu;
ulong ga, ga_end;
int is_dirty = 0;
- int r, n;
+ int r;
+ unsigned long n;
mutex_lock(&kvm->slots_lock);
@@ -1022,7 +1023,7 @@
kvm_for_each_vcpu(n, vcpu, kvm)
kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index c539472..1ed6b52 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -116,7 +116,7 @@
mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
- if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
asm volatile("isync;tlbwe;isync" : : : "memory");
@@ -152,18 +152,13 @@
TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
- if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
TLBCAM[index].MAS7 = (u64)phys >> 32;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
if (flags & _PAGE_USER) {
TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
}
-#else
- TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
- TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-#endif
tlbcam_addrs[index].start = virt;
tlbcam_addrs[index].limit = virt + size - 1;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 64c0022..eaa7633 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -242,10 +242,11 @@
*/
static int __init find_min_common_depth(void)
{
- int depth;
+ int depth, index;
const unsigned int *ref_points;
struct device_node *rtas_root;
unsigned int len;
+ struct device_node *options;
rtas_root = of_find_node_by_path("/rtas");
@@ -258,11 +259,23 @@
* configuration (should be all 0's) and the second is for a normal
* NUMA configuration.
*/
+ index = 1;
ref_points = of_get_property(rtas_root,
"ibm,associativity-reference-points", &len);
+ /*
+ * For type 1 affinity information we want the first field
+ */
+ options = of_find_node_by_path("/options");
+ if (options) {
+ const char *str;
+ str = of_get_property(options, "ibm,associativity-form", NULL);
+ if (str && !strcmp(str, "1"))
+ index = 0;
+ }
+
if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
- depth = ref_points[1];
+ depth = ref_points[index];
} else {
dbg("NUMA: ibm,associativity-reference-points not found.\n");
depth = -1;
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d951218..3a2ade2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -51,7 +51,7 @@
bool "Freescale MPC85xx DS"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
@@ -60,7 +60,7 @@
bool "Freescale MPC85xx RDB"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx RDB (P2020 RDB) board
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index fbe9f36..a0b5638 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -13,7 +13,7 @@
bool "Freescale MPC8641 HPCN"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select HAS_RAPIDIO
select SWIOTLB
help
@@ -28,7 +28,7 @@
config MPC8610_HPCD
bool "Freescale MPC8610 HPCD"
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
help
This option enables support for the MPC8610 HPCD board.
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 9b21ee6..01e7b5b 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/lmb.h>
+#include <linux/vmalloc.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
@@ -54,6 +55,12 @@
*/
start = (unsigned long)__va(base);
ret = remove_section_mapping(start, start + lmb_size);
+
+ /* Ensure all vmalloc mappings are flushed in case they also
+ * hit that section of memory
+ */
+ vm_unmap_aliases();
+
return ret;
}
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 4dae369..8d103ca 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -486,9 +486,6 @@
return -EINVAL;
}
- if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
- shift += 3;
-
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
@@ -503,6 +500,17 @@
bits <<= shift;
mask <<= shift;
+
+ if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
+ if (mode == CPM_CLK_RTX) {
+ bits |= bits << 3;
+ mask |= mask << 3;
+ } else if (mode == CPM_CLK_RX) {
+ bits <<= 3;
+ mask <<= 3;
+ }
+ }
+
out_be32(reg, (in_be32(reg) & ~mask) | bits);
return 0;
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index eb59272..8dc1e24 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -244,9 +244,6 @@
return -EINVAL;
}
- if (mode == CPM_CLK_RX)
- shift += 3;
-
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
@@ -259,6 +256,14 @@
bits <<= shift;
mask <<= shift;
+ if (mode == CPM_CLK_RTX) {
+ bits |= bits << 3;
+ mask |= mask << 3;
+ } else if (mode == CPM_CLK_RX) {
+ bits <<= 3;
+ mask <<= 3;
+ }
+
out_be32(reg, (in_be32(reg) & ~mask) | bits);
cpm2_unmap(im_cpmux);
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index 4a76d94..533f357 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -29,6 +29,7 @@
__u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */
__u32 tz_dsttime; /* Type of dst correction 0x34 */
__u32 ectg_available;
+ __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */
};
struct vdso_per_cpu_data {
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 08db736..a094089 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -61,6 +61,7 @@
DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
+ DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index b354427..c56d3f5 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -256,6 +256,9 @@
lghi %r2,0
brasl %r14,arch_set_page_states
+ /* Reinitialize the channel subsystem */
+ brasl %r14,channel_subsystem_reinit
+
/* Return 0 */
lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
lghi %r2,0
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fba6dec..d906bf1 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -221,6 +221,7 @@
vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+ vdso_data->ntp_mult = mult;
smp_wmb();
++vdso_data->tb_update_count;
}
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index 4a98909..9696439 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -38,13 +38,13 @@
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
ahi %r0,-1
-2: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
lr %r2,%r0
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 3f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
3: alr %r0,%r2
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
@@ -86,13 +86,13 @@
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
ahi %r0,-1
-12: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
lr %r2,%r0
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 13f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
13: alr %r0,%r2
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index ad8acfc..2d36331 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -35,13 +35,13 @@
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
-3: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
st %r0,24(%r15)
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
4: al %r0,24(%r15)
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 49106c6..f404678 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -36,7 +36,7 @@
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
lg %r0,__VDSO_XTIME_SEC(%r5)
@@ -64,7 +64,7 @@
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
lg %r0,__VDSO_XTIME_SEC(%r5)
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index f873e75..36ee674 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -31,7 +31,7 @@
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */
lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 64cda95..7a656bd 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -6,6 +6,7 @@
#include "linux/irqreturn.h"
#include "linux/kd.h"
#include "linux/sched.h"
+#include "linux/slab.h"
#include "chan_kern.h"
#include "irq_kern.h"
#include "irq_user.h"
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index 06d6ccf..b6b1096 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -8,7 +8,6 @@
#include <errno.h>
#include <sched.h>
#include <linux/limits.h>
-#include <linux/slab.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include "kern_constants.h"
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index a1dcfa3..30a3e97 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -347,6 +347,7 @@
extern void __iomem *early_memremap(resource_size_t phys_addr,
unsigned long size);
extern void early_iounmap(void __iomem *addr, unsigned long size);
+extern void fixup_early_ioremap(void);
#define IO_SPACE_LIMIT 0xffff
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index ff469e4..a353475 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -429,7 +429,7 @@
static __init int apbt_late_init(void)
{
- if (disable_apbt_percpu)
+ if (disable_apbt_percpu || !apb_timer_block_enabled)
return 0;
/* This notifier should be called after workqueue is ready */
hotcpu_notifier(apbt_cpuhp_notify, -20);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 127b871..eb2789c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2545,6 +2545,9 @@
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg = desc->chip_data;
+ if (!cfg)
+ return;
+
__irq_complete_move(&desc, cfg->vector);
}
#else
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index d360b56..b6215b9 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -929,7 +929,8 @@
powernow_table[i].index = index;
/* Frequency may be rounded for these */
- if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+ if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+ || boot_cpu_data.x86 == 0x11) {
powernow_table[i].frequency =
freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
} else
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 7e1cca1..1366c7c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -47,6 +47,27 @@
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+ /*
+ * Atom erratum AAE44/AAF40/AAG38/AAH41:
+ *
+ * A race condition between speculative fetches and invalidating
+ * a large page. This is worked around in microcode, but we
+ * need the microcode to have already been loaded... so if it is
+ * not, recommend a BIOS update and disable large pages.
+ */
+ if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) {
+ u32 ucode, junk;
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ sync_core();
+ rdmsr(MSR_IA32_UCODE_REV, junk, ucode);
+
+ if (ucode < 0x20e) {
+ printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
+ clear_cpu_cap(c, X86_FEATURE_PSE);
+ }
+ }
+
#ifdef CONFIG_X86_64
set_cpu_cap(c, X86_FEATURE_SYSENTER32);
#else
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 1cbed97..dfdb4db 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -22,6 +22,7 @@
*/
#include <linux/dmi.h>
+#include <linux/module.h>
#include <asm/div64.h>
#include <asm/vmware.h>
#include <asm/x86_init.h>
@@ -101,6 +102,7 @@
return 0;
}
+EXPORT_SYMBOL(vmware_platform);
/*
* VMware hypervisor takes care of exporting a reliable TSC to the guest.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index dc9690b..17cb329 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -276,12 +276,12 @@
set_tsk_thread_flag(p, TIF_FORK);
- p->thread.fs = me->thread.fs;
- p->thread.gs = me->thread.gs;
p->thread.io_bitmap_ptr = NULL;
savesegment(gs, p->thread.gsindex);
+ p->thread.gs = p->thread.gsindex ? 0 : me->thread.gs;
savesegment(fs, p->thread.fsindex);
+ p->thread.fs = p->thread.fsindex ? 0 : me->thread.fs;
savesegment(es, p->thread.es);
savesegment(ds, p->thread.ds);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 48aeee8..19a8906 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1490,8 +1490,8 @@
for_each_sp(pages, sp, parents, i) {
kvm_mmu_zap_page(kvm, sp);
mmu_pages_clear_parents(&parents);
+ zapped++;
}
- zapped += pages.nr;
kvm_mmu_pages_init(parent, &parents, &pages);
}
@@ -1542,14 +1542,16 @@
*/
if (used_pages > kvm_nr_mmu_pages) {
- while (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages &&
+ !list_empty(&kvm->arch.active_mmu_pages)) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
- kvm_mmu_zap_page(kvm, page);
+ used_pages -= kvm_mmu_zap_page(kvm, page);
used_pages--;
}
+ kvm_nr_mmu_pages = used_pages;
kvm->arch.n_free_mmu_pages = 0;
}
else
@@ -1596,7 +1598,8 @@
&& !sp->role.invalid) {
pgprintk("%s: zap %lx %x\n",
__func__, gfn, sp->role.word);
- kvm_mmu_zap_page(kvm, sp);
+ if (kvm_mmu_zap_page(kvm, sp))
+ nn = bucket->first;
}
}
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 445c594..2ba5820 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -706,29 +706,28 @@
if (err)
goto free_svm;
- page = alloc_page(GFP_KERNEL);
- if (!page) {
- err = -ENOMEM;
- goto uninit;
- }
-
err = -ENOMEM;
+ page = alloc_page(GFP_KERNEL);
+ if (!page)
+ goto uninit;
+
msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!msrpm_pages)
- goto uninit;
+ goto free_page1;
nested_msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!nested_msrpm_pages)
- goto uninit;
-
- svm->msrpm = page_address(msrpm_pages);
- svm_vcpu_init_msrpm(svm->msrpm);
+ goto free_page2;
hsave_page = alloc_page(GFP_KERNEL);
if (!hsave_page)
- goto uninit;
+ goto free_page3;
+
svm->nested.hsave = page_address(hsave_page);
+ svm->msrpm = page_address(msrpm_pages);
+ svm_vcpu_init_msrpm(svm->msrpm);
+
svm->nested.msrpm = page_address(nested_msrpm_pages);
svm->vmcb = page_address(page);
@@ -744,6 +743,12 @@
return &svm->vcpu;
+free_page3:
+ __free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page2:
+ __free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page1:
+ __free_page(page);
uninit:
kvm_vcpu_uninit(&svm->vcpu);
free_svm:
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 686492ed..bc933cf 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -77,6 +77,8 @@
#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
+#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM))
+
/*
* These 2 parameters are used to config the controls for Pause-Loop Exiting:
* ple_gap: upper bound on the amount of time between two successive
@@ -131,7 +133,7 @@
} host_state;
struct {
int vm86_active;
- u8 save_iopl;
+ ulong save_rflags;
struct kvm_save_segment {
u16 selector;
unsigned long base;
@@ -818,18 +820,23 @@
static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
{
- unsigned long rflags;
+ unsigned long rflags, save_rflags;
rflags = vmcs_readl(GUEST_RFLAGS);
- if (to_vmx(vcpu)->rmode.vm86_active)
- rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ save_rflags = to_vmx(vcpu)->rmode.save_rflags;
+ rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
+ }
return rflags;
}
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
- if (to_vmx(vcpu)->rmode.vm86_active)
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ to_vmx(vcpu)->rmode.save_rflags = rflags;
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
+ }
vmcs_writel(GUEST_RFLAGS, rflags);
}
@@ -1483,8 +1490,8 @@
vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
flags = vmcs_readl(GUEST_RFLAGS);
- flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
- flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
+ flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
vmcs_writel(GUEST_RFLAGS, flags);
vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1557,8 +1564,7 @@
vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
flags = vmcs_readl(GUEST_RFLAGS);
- vmx->rmode.save_iopl
- = (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+ vmx->rmode.save_rflags = flags;
flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 24cd0ee..3c4ca98 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -433,8 +433,6 @@
#ifdef CONFIG_X86_64
if (cr0 & 0xffffffff00000000UL) {
- printk(KERN_DEBUG "set_cr0: 0x%lx #GP, reserved bits 0x%lx\n",
- cr0, kvm_read_cr0(vcpu));
kvm_inject_gp(vcpu, 0);
return;
}
@@ -443,14 +441,11 @@
cr0 &= ~CR0_RESERVED_BITS;
if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD)) {
- printk(KERN_DEBUG "set_cr0: #GP, CD == 0 && NW == 1\n");
kvm_inject_gp(vcpu, 0);
return;
}
if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE)) {
- printk(KERN_DEBUG "set_cr0: #GP, set PG flag "
- "and a clear PE flag\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -461,15 +456,11 @@
int cs_db, cs_l;
if (!is_pae(vcpu)) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while PAE is disabled\n");
kvm_inject_gp(vcpu, 0);
return;
}
kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
if (cs_l) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while CS.L == 1\n");
kvm_inject_gp(vcpu, 0);
return;
@@ -477,8 +468,6 @@
} else
#endif
if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -505,28 +494,23 @@
unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
if (cr4 & CR4_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_long_mode(vcpu)) {
if (!(cr4 & X86_CR4_PAE)) {
- printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
- "in long mode\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
&& ((cr4 ^ old_cr4) & pdptr_bits)
&& !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (cr4 & X86_CR4_VMXE) {
- printk(KERN_DEBUG "set_cr4: #GP, setting VMXE\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -547,21 +531,16 @@
if (is_long_mode(vcpu)) {
if (cr3 & CR3_L_MODE_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else {
if (is_pae(vcpu)) {
if (cr3 & CR3_PAE_RESERVED_BITS) {
- printk(KERN_DEBUG
- "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3)) {
- printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -593,7 +572,6 @@
void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
{
if (cr8 & CR8_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr8: #GP, reserved bits 0x%lx\n", cr8);
kvm_inject_gp(vcpu, 0);
return;
}
@@ -649,15 +627,12 @@
static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
if (efer & efer_reserved_bits) {
- printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
- efer);
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu)
&& (vcpu->arch.efer & EFER_LME) != (efer & EFER_LME)) {
- printk(KERN_DEBUG "set_efer: #GP, change LME while paging\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -667,7 +642,6 @@
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT))) {
- printk(KERN_DEBUG "set_efer: #GP, enable FFXSR w/o CPUID capability\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -678,7 +652,6 @@
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM))) {
- printk(KERN_DEBUG "set_efer: #GP, enable SVM w/o SVM\n");
kvm_inject_gp(vcpu, 0);
return;
}
@@ -967,9 +940,13 @@
if (msr >= MSR_IA32_MC0_CTL &&
msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
u32 offset = msr - MSR_IA32_MC0_CTL;
- /* only 0 or all 1s can be written to IA32_MCi_CTL */
+ /* only 0 or all 1s can be written to IA32_MCi_CTL
+ * some Linux kernels though clear bit 10 in bank 4 to
+ * workaround a BIOS/GART TBL issue on AMD K8s, ignore
+ * this to avoid an uncatched #GP in the guest
+ */
if ((offset & 0x3) == 0 &&
- data != 0 && data != ~(u64)0)
+ data != 0 && (data | (1 << 10)) != ~(u64)0)
return -1;
vcpu->arch.mce_banks[offset] = data;
break;
@@ -2635,8 +2612,9 @@
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
struct kvm_dirty_log *log)
{
- int r, n, i;
+ int r, i;
struct kvm_memory_slot *memslot;
+ unsigned long n;
unsigned long is_dirty = 0;
unsigned long *dirty_bitmap = NULL;
@@ -2651,7 +2629,7 @@
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
r = -ENOMEM;
dirty_bitmap = vmalloc(n);
@@ -4483,7 +4461,9 @@
kvm_set_cr8(vcpu, kvm_run->cr8);
if (vcpu->arch.pio.cur_count) {
+ vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
r = complete_pio(vcpu);
+ srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
if (r)
goto out;
}
@@ -5146,6 +5126,7 @@
int ret = 0;
u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
+ u32 desc_limit;
old_tss_base = kvm_mmu_gva_to_gpa_write(vcpu, old_tss_base, NULL);
@@ -5168,7 +5149,10 @@
}
}
- if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
+ desc_limit = get_desc_limit(&nseg_desc);
+ if (!nseg_desc.p ||
+ ((desc_limit < 0x67 && (nseg_desc.type & 8)) ||
+ desc_limit < 0x2b)) {
kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
return 1;
}
diff --git a/arch/x86/lib/rwsem_64.S b/arch/x86/lib/rwsem_64.S
index 15acecf..41fcf00 100644
--- a/arch/x86/lib/rwsem_64.S
+++ b/arch/x86/lib/rwsem_64.S
@@ -60,7 +60,7 @@
ENDPROC(call_rwsem_down_write_failed)
ENTRY(call_rwsem_wake)
- decw %dx /* do nothing if still outstanding active readers */
+ decl %edx /* do nothing if still outstanding active readers */
jnz 1f
save_common_regs
movq %rax,%rdi
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 5eb1ba7..12e4d2d 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -448,6 +448,20 @@
static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
+void __init fixup_early_ioremap(void)
+{
+ int i;
+
+ for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+ if (prev_map[i]) {
+ WARN_ON(1);
+ break;
+ }
+ }
+
+ early_ioremap_init();
+}
+
static int __init check_early_ioremap_leak(void)
{
int count = 0;
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 1a8faf0..7928540 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -18,6 +18,7 @@
#include <asm/e820.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
+#include <asm/io.h>
unsigned int __VMALLOC_RESERVE = 128 << 20;
@@ -128,6 +129,7 @@
address = memparse(arg, &arg);
reserve_top_address(address);
+ fixup_early_ioremap();
return 0;
}
early_param("reservetop", parse_reservetop);
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index c7b1ebf..31930fd 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -66,14 +66,44 @@
struct acpi_resource_address64 *addr)
{
acpi_status status;
+ struct acpi_resource_memory24 *memory24;
+ struct acpi_resource_memory32 *memory32;
+ struct acpi_resource_fixed_memory32 *fixed_memory32;
- status = acpi_resource_to_address64(resource, addr);
- if (ACPI_SUCCESS(status) &&
- (addr->resource_type == ACPI_MEMORY_RANGE ||
- addr->resource_type == ACPI_IO_RANGE) &&
- addr->address_length > 0 &&
- addr->producer_consumer == ACPI_PRODUCER) {
+ memset(addr, 0, sizeof(*addr));
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ memory24 = &resource->data.memory24;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = memory24->minimum;
+ addr->address_length = memory24->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ memory32 = &resource->data.memory32;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = memory32->minimum;
+ addr->address_length = memory32->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
+ return AE_OK;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ fixed_memory32 = &resource->data.fixed_memory32;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = fixed_memory32->address;
+ addr->address_length = fixed_memory32->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
+ return AE_OK;
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ status = acpi_resource_to_address64(resource, addr);
+ if (ACPI_SUCCESS(status) &&
+ (addr->resource_type == ACPI_MEMORY_RANGE ||
+ addr->resource_type == ACPI_IO_RANGE) &&
+ addr->address_length > 0) {
+ return AE_OK;
+ }
+ break;
}
return AE_ERROR;
}
@@ -91,30 +121,6 @@
return AE_OK;
}
-static void
-align_resource(struct acpi_device *bridge, struct resource *res)
-{
- int align = (res->flags & IORESOURCE_MEM) ? 16 : 4;
-
- /*
- * Host bridge windows are not BARs, but the decoders on the PCI side
- * that claim this address space have starting alignment and length
- * constraints, so fix any obvious BIOS goofs.
- */
- if (!IS_ALIGNED(res->start, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning start to %d-byte boundary\n", res, align);
- res->start &= ~(align - 1);
- }
- if (!IS_ALIGNED(res->end + 1, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning end to %d-byte boundary\n", res, align);
- res->end = ALIGN(res->end, align) - 1;
- }
-}
-
static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
@@ -124,7 +130,7 @@
acpi_status status;
unsigned long flags;
struct resource *root, *conflict;
- u64 start, end, max_len;
+ u64 start, end;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -141,19 +147,8 @@
} else
return AE_OK;
- max_len = addr.maximum - addr.minimum + 1;
- if (addr.address_length > max_len) {
- dev_printk(KERN_DEBUG, &info->bridge->dev,
- "host bridge window length %#llx doesn't fit in "
- "%#llx-%#llx, trimming\n",
- (unsigned long long) addr.address_length,
- (unsigned long long) addr.minimum,
- (unsigned long long) addr.maximum);
- addr.address_length = max_len;
- }
-
start = addr.minimum + addr.translation_offset;
- end = start + addr.address_length - 1;
+ end = addr.maximum + addr.translation_offset;
res = &info->res[info->res_num];
res->name = info->name;
@@ -161,7 +156,6 @@
res->start = start;
res->end = end;
res->child = NULL;
- align_resource(info->bridge, res);
if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 46fd43f..97da2ba 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -72,6 +72,9 @@
return start;
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
+ } else if (res->flags & IORESOURCE_MEM) {
+ if (start < BIOS_END)
+ start = BIOS_END;
}
return start;
}
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 1ba7e0a..4f0c06c 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -109,6 +109,7 @@
struct request_queue *q = (struct request_queue *) data;
unsigned long flags, next = 0;
struct request *rq, *tmp;
+ int next_set = 0;
spin_lock_irqsave(q->queue_lock, flags);
@@ -122,16 +123,13 @@
if (blk_mark_rq_complete(rq))
continue;
blk_rq_timed_out(rq);
- } else if (!next || time_after(next, rq->deadline))
+ } else if (!next_set || time_after(next, rq->deadline)) {
next = rq->deadline;
+ next_set = 1;
+ }
}
- /*
- * next can never be 0 here with the list non-empty, since we always
- * bump ->deadline to 1 so we can detect if the timer was ever added
- * or not. See comment in blk_add_timer()
- */
- if (next)
+ if (next_set)
mod_timer(&q->timeout, round_jiffies_up(next));
spin_unlock_irqrestore(q->queue_lock, flags);
diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c
index 943f2ab..ce038d8 100644
--- a/crypto/async_tx/async_raid6_recov.c
+++ b/crypto/async_tx/async_raid6_recov.c
@@ -324,6 +324,7 @@
async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
struct page **blocks, struct async_submit_ctl *submit)
{
+ void *scribble = submit->scribble;
int non_zero_srcs, i;
BUG_ON(faila == failb);
@@ -332,11 +333,13 @@
pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
- /* we need to preserve the contents of 'blocks' for the async
- * case, so punt to synchronous if a scribble buffer is not available
+ /* if a dma resource is not available or a scribble buffer is not
+ * available punt to the synchronous path. In the 'dma not
+ * available' case be sure to use the scribble buffer to
+ * preserve the content of 'blocks' as the caller intended.
*/
- if (!submit->scribble) {
- void **ptrs = (void **) blocks;
+ if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+ void **ptrs = scribble ? scribble : (void **) blocks;
async_tx_quiesce(&submit->depend_tx);
for (i = 0; i < disks; i++)
@@ -406,11 +409,13 @@
pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
- /* we need to preserve the contents of 'blocks' for the async
- * case, so punt to synchronous if a scribble buffer is not available
+ /* if a dma resource is not available or a scribble buffer is not
+ * available punt to the synchronous path. In the 'dma not
+ * available' case be sure to use the scribble buffer to
+ * preserve the content of 'blocks' as the caller intended.
*/
- if (!scribble) {
- void **ptrs = (void **) blocks;
+ if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+ void **ptrs = scribble ? scribble : (void **) blocks;
async_tx_quiesce(&submit->depend_tx);
for (i = 0; i < disks; i++)
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 2bb7348..05eb32e 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -46,6 +46,12 @@
char tail[];
};
+static void authenc_request_complete(struct aead_request *req, int err)
+{
+ if (err != -EINPROGRESS)
+ aead_request_complete(req, err);
+}
+
static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
unsigned int keylen)
{
@@ -142,7 +148,7 @@
crypto_aead_authsize(authenc), 1);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static void authenc_geniv_ahash_done(struct crypto_async_request *areq, int err)
@@ -208,7 +214,7 @@
err = crypto_ablkcipher_decrypt(abreq);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static void authenc_verify_ahash_done(struct crypto_async_request *areq,
@@ -245,7 +251,7 @@
err = crypto_ablkcipher_decrypt(abreq);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static u8 *crypto_authenc_ahash_fb(struct aead_request *req, unsigned int flags)
@@ -379,7 +385,7 @@
err = crypto_authenc_genicv(areq, iv, 0);
}
- aead_request_complete(areq, err);
+ authenc_request_complete(areq, err);
}
static int crypto_authenc_encrypt(struct aead_request *req)
@@ -420,7 +426,7 @@
err = crypto_authenc_genicv(areq, greq->giv, 0);
}
- aead_request_complete(areq, err);
+ authenc_request_complete(areq, err);
}
static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 9f6cfac..228740f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -879,6 +879,8 @@
void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ struct request_queue *q = qc->scsicmd->device->request_queue;
+ unsigned long flags;
WARN_ON(!ap->ops->error_handler);
@@ -890,7 +892,9 @@
* Note that ATA_QCFLAG_FAILED is unconditionally set after
* this function completes.
*/
+ spin_lock_irqsave(q->queue_lock, flags);
blk_abort_request(qc->scsicmd->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
}
/**
@@ -1624,6 +1628,7 @@
}
/* okay, this error is ours */
+ memset(&tf, 0, sizeof(tf));
rc = ata_eh_read_log_10h(dev, &tag, &tf);
if (rc) {
ata_link_printk(link, KERN_ERR, "failed to read log page 10h "
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3c3172d..4164dd24 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -424,6 +424,8 @@
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
@@ -444,6 +446,8 @@
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 67e0fc5..93d1f9b 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1695,6 +1695,7 @@
cf |= CF_DRY_RUN;
else {
dev_err(DEV, "--dry-run is not supported by peer");
+ kfree(p);
return 0;
}
}
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index ed9f1de..3f096e79 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -899,7 +899,8 @@
drbd_thread_start(&mdev->asender);
- drbd_send_protocol(mdev);
+ if (!drbd_send_protocol(mdev))
+ return -1;
drbd_send_sync_param(mdev, &mdev->sync_conf);
drbd_send_sizes(mdev, 0);
drbd_send_uuids(mdev);
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index ddf1942..8a549db 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -48,6 +48,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/compat.h>
#include <linux/kthread.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
@@ -2984,7 +2985,7 @@
mutex_unlock(&ctl_mutex);
}
-static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct pkt_ctrl_command ctrl_cmd;
@@ -3021,10 +3022,20 @@
return ret;
}
+#ifdef CONFIG_COMPAT
+static long pkt_ctl_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ return pkt_ctl_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
static const struct file_operations pkt_ctl_fops = {
- .ioctl = pkt_ctl_ioctl,
- .owner = THIS_MODULE,
+ .open = nonseekable_open,
+ .unlocked_ioctl = pkt_ctl_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = pkt_ctl_compat_ioctl,
+#endif
+ .owner = THIS_MODULE,
};
static struct miscdevice pkt_misc = {
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 0fa2e4a..c1ab303 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -879,8 +879,8 @@
if (tport == NULL)
return -ENODEV;
port = container_of(tport, struct isi_port, port);
- card = &isi_card[BOARD(tty->index)];
+ tty->driver_data = port;
return tty_port_open(tport, tty, filp);
}
@@ -936,7 +936,12 @@
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *ip = tty->driver_data;
- struct tty_port *port = &ip->port;
+ struct tty_port *port;
+
+ if (ip == NULL)
+ return;
+
+ port = &ip->port;
if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
return;
tty_port_close(port, tty, filp);
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4cd6c52..4e395c9 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -827,6 +827,8 @@
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
+
+ tty->driver_data = portp;
return tty_port_open(&portp->port, tty, filp);
}
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 4702305..d2692d4 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1011,6 +1011,7 @@
if (!info->ioaddr)
return -ENODEV;
+ tty->driver_data = info;
return tty_port_open(&info->port, tty, filp);
}
@@ -1074,7 +1075,7 @@
struct mxser_port *info = tty->driver_data;
struct tty_port *port = &info->port;
- if (tty->index == MXSER_PORTS)
+ if (tty->index == MXSER_PORTS || info == NULL)
return;
if (tty_port_close_start(port, tty, filp) == 0)
return;
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 0a8d1e5..b02332a 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -909,6 +909,7 @@
if (error)
return error;
+ tty->driver_data = port;
return tty_port_open(&port->port, tty, filp);
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 0e511d6..6049fd7 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -724,7 +724,6 @@
{
struct stlport *portp;
struct stlbrd *brdp;
- struct tty_port *port;
unsigned int minordev, brdnr, panelnr;
int portnr;
@@ -754,7 +753,8 @@
portp = brdp->panels[panelnr]->ports[portnr];
if (portp == NULL)
return -ENODEV;
- port = &portp->port;
+
+ tty->driver_data = portp;
return tty_port_open(&portp->port, tty, filp);
}
@@ -841,7 +841,8 @@
pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
portp = tty->driver_data;
- BUG_ON(portp == NULL);
+ if(portp == NULL)
+ return;
tty_port_close(&portp->port, tty, filp);
}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2d5d575..75d293e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1113,6 +1113,8 @@
unsigned int cpu = sys_dev->id;
unsigned long flags;
struct cpufreq_policy *data;
+ struct kobject *kobj;
+ struct completion *cmp;
#ifdef CONFIG_SMP
struct sys_device *cpu_sys_dev;
unsigned int j;
@@ -1141,10 +1143,11 @@
dprintk("removing link\n");
cpumask_clear_cpu(cpu, data->cpus);
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- sysfs_remove_link(&sys_dev->kobj, "cpufreq");
+ kobj = &sys_dev->kobj;
cpufreq_cpu_put(data);
cpufreq_debug_enable_ratelimit();
unlock_policy_rwsem_write(cpu);
+ sysfs_remove_link(kobj, "cpufreq");
return 0;
}
#endif
@@ -1181,7 +1184,10 @@
data->governor->name, CPUFREQ_NAME_LEN);
#endif
cpu_sys_dev = get_cpu_sysdev(j);
- sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
+ kobj = &cpu_sys_dev->kobj;
+ unlock_policy_rwsem_write(cpu);
+ sysfs_remove_link(kobj, "cpufreq");
+ lock_policy_rwsem_write(cpu);
cpufreq_cpu_put(data);
}
}
@@ -1192,19 +1198,22 @@
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- kobject_put(&data->kobj);
+ kobj = &data->kobj;
+ cmp = &data->kobj_unregister;
+ unlock_policy_rwsem_write(cpu);
+ kobject_put(kobj);
/* we need to make sure that the underlying kobj is actually
* not referenced anymore by anybody before we proceed with
* unloading.
*/
dprintk("waiting for dropping of refcount\n");
- wait_for_completion(&data->kobj_unregister);
+ wait_for_completion(cmp);
dprintk("wait complete\n");
+ lock_policy_rwsem_write(cpu);
if (cpufreq_driver->exit)
cpufreq_driver->exit(data);
-
unlock_policy_rwsem_write(cpu);
free_cpumask_var(data->related_cpus);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 599a40b..3a14787 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -444,6 +444,7 @@
static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
{
unsigned int load = 0;
+ unsigned int max_load = 0;
unsigned int freq_target;
struct cpufreq_policy *policy;
@@ -501,6 +502,9 @@
continue;
load = 100 * (wall_time - idle_time) / wall_time;
+
+ if (load > max_load)
+ max_load = load;
}
/*
@@ -511,7 +515,7 @@
return;
/* Check for frequency increase */
- if (load > dbs_tuners_ins.up_threshold) {
+ if (max_load > dbs_tuners_ins.up_threshold) {
this_dbs_info->down_skip = 0;
/* if we are already at full speed then break out early */
@@ -538,7 +542,7 @@
* can support the current CPU usage without triggering the up
* policy. To be safe, we focus 10 points under the threshold.
*/
- if (load < (dbs_tuners_ins.down_threshold - 10)) {
+ if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
this_dbs_info->requested_freq -= freq_target;
diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c
index 3ebc610..75fcf1a 100644
--- a/drivers/dma/txx9dmac.c
+++ b/drivers/dma/txx9dmac.c
@@ -1359,3 +1359,5 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TXx9 DMA Controller driver");
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_ALIAS("platform:txx9dmac");
+MODULE_ALIAS("platform:txx9dmac-chan");
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index f5b6d9f..97e64bc 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -294,7 +294,6 @@
void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
{
u32 ec = ERROR_CODE(regs->nbsl);
- u32 xec = EXT_ERROR_CODE(regs->nbsl);
if (!handle_errors)
return;
@@ -324,7 +323,7 @@
pr_cont("\n");
}
- pr_emerg("%s.\n", EXT_ERR_MSG(xec));
+ pr_emerg("%s.\n", EXT_ERR_MSG(regs->nbsl));
if (BUS_ERROR(ec) && nb_bus_decoder)
nb_bus_decoder(node_id, regs);
@@ -374,7 +373,7 @@
((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
/* do the two bits[14:13] together */
- ecc = m->status & (3ULL << 45);
+ ecc = (m->status >> 45) & 0x3;
if (ecc)
pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 3784a47..8f5aebf 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -190,7 +190,7 @@
for (try = 0; try < 5; try++) {
new = allocate ? old - bandwidth : old + bandwidth;
if (new < 0 || new > BANDWIDTH_AVAILABLE_INITIAL)
- break;
+ return -EBUSY;
data[0] = cpu_to_be32(old);
data[1] = cpu_to_be32(new);
@@ -218,7 +218,7 @@
u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
{
__be32 c, all, old;
- int i, retry = 5;
+ int i, ret = -EIO, retry = 5;
old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -226,6 +226,8 @@
if (!(channels_mask & 1 << i))
continue;
+ ret = -EBUSY;
+
c = cpu_to_be32(1 << (31 - i));
if ((old & c) != (all & c))
continue;
@@ -251,12 +253,16 @@
/* 1394-1995 IRM, fall through to retry. */
default:
- if (retry--)
+ if (retry) {
+ retry--;
i--;
+ } else {
+ ret = -EIO;
+ }
}
}
- return -EIO;
+ return ret;
}
static void deallocate_channel(struct fw_card *card, int irm_id,
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 0cf4d7f..94b16e0 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1158,7 +1158,7 @@
struct fw_packet *packet, u32 csr)
{
struct fw_packet response;
- int tcode, length, ext_tcode, sel;
+ int tcode, length, ext_tcode, sel, try;
__be32 *payload, lock_old;
u32 lock_arg, lock_data;
@@ -1185,21 +1185,26 @@
reg_write(ohci, OHCI1394_CSRCompareData, lock_arg);
reg_write(ohci, OHCI1394_CSRControl, sel);
- if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000)
- lock_old = cpu_to_be32(reg_read(ohci, OHCI1394_CSRData));
- else
- fw_notify("swap not done yet\n");
+ for (try = 0; try < 20; try++)
+ if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) {
+ lock_old = cpu_to_be32(reg_read(ohci,
+ OHCI1394_CSRData));
+ fw_fill_response(&response, packet->header,
+ RCODE_COMPLETE,
+ &lock_old, sizeof(lock_old));
+ goto out;
+ }
- fw_fill_response(&response, packet->header,
- RCODE_COMPLETE, &lock_old, sizeof(lock_old));
+ fw_error("swap not done (CSR lock timeout)\n");
+ fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0);
+
out:
fw_core_handle_response(&ohci->card, &response);
}
static void handle_local_request(struct context *ctx, struct fw_packet *packet)
{
- u64 offset;
- u32 csr;
+ u64 offset, csr;
if (ctx == &ctx->ohci->at_request_ctx) {
packet->ack = ACK_PENDING;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 76be229..eb0c3fe 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -416,7 +416,8 @@
return 0;
free_sd:
- sysfs_put(pdesc->value_sd);
+ if (pdesc)
+ sysfs_put(pdesc->value_sd);
free_id:
idr_remove(&pdesc_idr, id);
desc->flags &= GPIO_FLAGS_MASK;
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7d521e1..b827c97 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -252,6 +252,18 @@
static void pca953x_irq_bus_sync_unlock(unsigned int irq)
{
struct pca953x_chip *chip = get_irq_chip_data(irq);
+ uint16_t new_irqs;
+ uint16_t level;
+
+ /* Look for any newly setup interrupt */
+ new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
+ new_irqs &= ~chip->reg_direction;
+
+ while (new_irqs) {
+ level = __ffs(new_irqs);
+ pca953x_gpio_direction_input(&chip->gpio_chip, level);
+ new_irqs &= ~(1 << level);
+ }
mutex_unlock(&chip->irq_lock);
}
@@ -278,7 +290,7 @@
else
chip->irq_trig_raise &= ~mask;
- return pca953x_gpio_direction_input(&chip->gpio_chip, level);
+ return 0;
}
static struct irq_chip pca953x_irq_chip = {
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 5ad8f77..105701a 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -91,6 +91,12 @@
gpiodir = readb(chip->base + GPIODIR);
gpiodir |= 1 << offset;
writeb(gpiodir, chip->base + GPIODIR);
+
+ /*
+ * gpio value is set again, because pl061 doesn't allow to set value of
+ * a gpio pin before configuring it in OUT mode.
+ */
+ writeb(!!value << offset, chip->base + (1 << (offset + 2)));
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
@@ -183,7 +189,7 @@
gpioibe &= ~(1 << offset);
if (trigger & IRQ_TYPE_EDGE_RISING)
gpioiev |= 1 << offset;
- else
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
gpioiev &= ~(1 << offset);
}
writeb(gpioibe, chip->base + GPIOIBE);
@@ -204,7 +210,7 @@
static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct list_head *chip_list = get_irq_chip_data(irq);
+ struct list_head *chip_list = get_irq_data(irq);
struct list_head *ptr;
struct pl061_gpio *chip;
@@ -297,9 +303,9 @@
goto iounmap;
}
INIT_LIST_HEAD(chip_list);
- set_irq_chip_data(irq, chip_list);
+ set_irq_data(irq, chip_list);
} else
- chip_list = get_irq_chip_data(irq);
+ chip_list = get_irq_data(irq);
list_add(&chip->list, chip_list);
for (i = 0; i < PL061_GPIO_NR; i++) {
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3bd8727..a263b70 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -476,6 +476,7 @@
unsigned long irqflags;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ dev->driver->disable_vblank(dev, crtc);
DRM_WAKEUP(&dev->vbl_queue[crtc]);
dev->vblank_enabled[crtc] = 0;
dev->last_vblank[crtc] = dev->driver->get_vblank_counter(dev, crtc);
diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c
index e4865f9..7732268 100644
--- a/drivers/gpu/drm/drm_memory.c
+++ b/drivers/gpu/drm/drm_memory.c
@@ -77,7 +77,7 @@
&& (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
(offset + size))
break;
- if (!agpmem)
+ if (&agpmem->head == &dev->agp->memory)
return NULL;
/*
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 1a1825b..25bbd30 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -354,7 +354,10 @@
int drm_sysfs_connector_add(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- int ret = 0, i, j;
+ int attr_cnt = 0;
+ int opt_cnt = 0;
+ int i;
+ int ret = 0;
/* We shouldn't get called more than once for the same connector */
BUG_ON(device_is_registered(&connector->kdev));
@@ -377,8 +380,8 @@
/* Standard attributes */
- for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) {
- ret = device_create_file(&connector->kdev, &connector_attrs[i]);
+ for (attr_cnt = 0; attr_cnt < ARRAY_SIZE(connector_attrs); attr_cnt++) {
+ ret = device_create_file(&connector->kdev, &connector_attrs[attr_cnt]);
if (ret)
goto err_out_files;
}
@@ -394,8 +397,8 @@
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Component:
case DRM_MODE_CONNECTOR_TV:
- for (i = 0; i < ARRAY_SIZE(connector_attrs_opt1); i++) {
- ret = device_create_file(&connector->kdev, &connector_attrs_opt1[i]);
+ for (opt_cnt = 0; opt_cnt < ARRAY_SIZE(connector_attrs_opt1); opt_cnt++) {
+ ret = device_create_file(&connector->kdev, &connector_attrs_opt1[opt_cnt]);
if (ret)
goto err_out_files;
}
@@ -414,10 +417,10 @@
return 0;
err_out_files:
- if (i > 0)
- for (j = 0; j < i; j++)
- device_remove_file(&connector->kdev,
- &connector_attrs[i]);
+ for (i = 0; i < opt_cnt; i++)
+ device_remove_file(&connector->kdev, &connector_attrs_opt1[i]);
+ for (i = 0; i < attr_cnt; i++)
+ device_remove_file(&connector->kdev, &connector_attrs[i]);
device_unregister(&connector->kdev);
out:
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2dc9393..c3cfafc 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1357,6 +1357,8 @@
dev_priv->cfb_size = size;
+ dev_priv->compressed_fb = compressed_fb;
+
if (IS_GM45(dev)) {
g4x_disable_fbc(dev);
I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
@@ -1364,12 +1366,22 @@
i8xx_disable_fbc(dev);
I915_WRITE(FBC_CFB_BASE, cfb_base);
I915_WRITE(FBC_LL_BASE, ll_base);
+ dev_priv->compressed_llb = compressed_llb;
}
DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
ll_base, size >> 20);
}
+static void i915_cleanup_compression(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ drm_mm_put_block(dev_priv->compressed_fb);
+ if (!IS_GM45(dev))
+ drm_mm_put_block(dev_priv->compressed_llb);
+}
+
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
@@ -1787,6 +1799,8 @@
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
+ if (I915_HAS_FBC(dev) && i915_powersave)
+ i915_cleanup_compression(dev);
drm_mm_takedown(&dev_priv->vram);
i915_gem_lastclose(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0af3dcc..cc03537 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -69,7 +69,8 @@
};
const static struct intel_device_info intel_i85x_info = {
- .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+ .is_i8xx = 1, .is_i85x = 1, .is_mobile = 1,
+ .cursor_needs_physical = 1,
};
const static struct intel_device_info intel_i865g_info = {
@@ -151,7 +152,7 @@
INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
- INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6960849..6e47900 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -195,6 +195,7 @@
struct intel_device_info {
u8 is_mobile : 1;
u8 is_i8xx : 1;
+ u8 is_i85x : 1;
u8 is_i915g : 1;
u8 is_i9xx : 1;
u8 is_i945gm : 1;
@@ -235,11 +236,14 @@
drm_dma_handle_t *status_page_dmah;
void *hw_status_page;
+ void *seqno_page;
dma_addr_t dma_status_page;
uint32_t counter;
unsigned int status_gfx_addr;
+ unsigned int seqno_gfx_addr;
drm_local_map_t hws_map;
struct drm_gem_object *hws_obj;
+ struct drm_gem_object *seqno_obj;
struct drm_gem_object *pwrctx;
struct resource mch_res;
@@ -630,6 +634,9 @@
u8 max_delay;
enum no_fbc_reason no_fbc_reason;
+
+ struct drm_mm_node *compressed_fb;
+ struct drm_mm_node *compressed_llb;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */
@@ -1070,7 +1077,7 @@
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I85X(dev) (INTEL_INFO(dev)->is_i85x)
#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
#define IS_GEN2(dev) (INTEL_INFO(dev)->is_i8xx)
#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
@@ -1135,6 +1142,7 @@
#define HAS_PCH_SPLIT(dev) (IS_IRONLAKE(dev) || \
IS_GEN6(dev))
+#define HAS_PIPE_CONTROL(dev) (IS_IRONLAKE(dev) || IS_GEN6(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 80871c6..ef3d91d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1588,6 +1588,13 @@
}
}
+#define PIPE_CONTROL_FLUSH(addr) \
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE | \
+ PIPE_CONTROL_DEPTH_STALL); \
+ OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT); \
+ OUT_RING(0); \
+ OUT_RING(0); \
+
/**
* Creates a new sequence number, emitting a write of it to the status page
* plus an interrupt, which will trigger i915_user_interrupt_handler.
@@ -1622,13 +1629,47 @@
if (dev_priv->mm.next_gem_seqno == 0)
dev_priv->mm.next_gem_seqno++;
- BEGIN_LP_RING(4);
- OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
- OUT_RING(seqno);
+ if (HAS_PIPE_CONTROL(dev)) {
+ u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
- OUT_RING(MI_USER_INTERRUPT);
- ADVANCE_LP_RING();
+ /*
+ * Workaround qword write incoherence by flushing the
+ * PIPE_NOTIFY buffers out to memory before requesting
+ * an interrupt.
+ */
+ BEGIN_LP_RING(32);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128; /* write to separate cachelines */
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
+ PIPE_CONTROL_NOTIFY);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else {
+ BEGIN_LP_RING(4);
+ OUT_RING(MI_STORE_DWORD_INDEX);
+ OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(seqno);
+
+ OUT_RING(MI_USER_INTERRUPT);
+ ADVANCE_LP_RING();
+ }
DRM_DEBUG_DRIVER("%d\n", seqno);
@@ -1752,7 +1793,10 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
- return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
+ if (HAS_PIPE_CONTROL(dev))
+ return ((volatile u32 *)(dev_priv->seqno_page))[0];
+ else
+ return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
}
/**
@@ -2362,6 +2406,12 @@
pitch_val = obj_priv->stride / tile_width;
pitch_val = ffs(pitch_val) - 1;
+ if (obj_priv->tiling_mode == I915_TILING_Y &&
+ HAS_128_BYTE_Y_TILING(dev))
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+ else
+ WARN_ON(pitch_val > I915_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
@@ -4546,6 +4596,49 @@
return 0;
}
+/*
+ * 965+ support PIPE_CONTROL commands, which provide finer grained control
+ * over cache flushing.
+ */
+static int
+i915_gem_init_pipe_control(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ obj = drm_gem_object_alloc(dev, 4096);
+ if (obj == NULL) {
+ DRM_ERROR("Failed to allocate seqno page\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ obj_priv = to_intel_bo(obj);
+ obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
+
+ ret = i915_gem_object_pin(obj, 4096);
+ if (ret)
+ goto err_unref;
+
+ dev_priv->seqno_gfx_addr = obj_priv->gtt_offset;
+ dev_priv->seqno_page = kmap(obj_priv->pages[0]);
+ if (dev_priv->seqno_page == NULL)
+ goto err_unpin;
+
+ dev_priv->seqno_obj = obj;
+ memset(dev_priv->seqno_page, 0, PAGE_SIZE);
+
+ return 0;
+
+err_unpin:
+ i915_gem_object_unpin(obj);
+err_unref:
+ drm_gem_object_unreference(obj);
+err:
+ return ret;
+}
+
static int
i915_gem_init_hws(struct drm_device *dev)
{
@@ -4563,7 +4656,8 @@
obj = drm_gem_object_alloc(dev, 4096);
if (obj == NULL) {
DRM_ERROR("Failed to allocate status page\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err;
}
obj_priv = to_intel_bo(obj);
obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
@@ -4571,7 +4665,7 @@
ret = i915_gem_object_pin(obj, 4096);
if (ret != 0) {
drm_gem_object_unreference(obj);
- return ret;
+ goto err_unref;
}
dev_priv->status_gfx_addr = obj_priv->gtt_offset;
@@ -4580,10 +4674,16 @@
if (dev_priv->hw_status_page == NULL) {
DRM_ERROR("Failed to map status page.\n");
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_unpin;
}
+
+ if (HAS_PIPE_CONTROL(dev)) {
+ ret = i915_gem_init_pipe_control(dev);
+ if (ret)
+ goto err_unpin;
+ }
+
dev_priv->hws_obj = obj;
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
if (IS_GEN6(dev)) {
@@ -4596,6 +4696,30 @@
DRM_DEBUG_DRIVER("hws offset: 0x%08x\n", dev_priv->status_gfx_addr);
return 0;
+
+err_unpin:
+ i915_gem_object_unpin(obj);
+err_unref:
+ drm_gem_object_unreference(obj);
+err:
+ return 0;
+}
+
+static void
+i915_gem_cleanup_pipe_control(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ obj = dev_priv->seqno_obj;
+ obj_priv = to_intel_bo(obj);
+ kunmap(obj_priv->pages[0]);
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ dev_priv->seqno_obj = NULL;
+
+ dev_priv->seqno_page = NULL;
}
static void
@@ -4619,6 +4743,9 @@
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
dev_priv->hw_status_page = NULL;
+ if (HAS_PIPE_CONTROL(dev))
+ i915_gem_cleanup_pipe_control(dev);
+
/* Write high address into HWS_PGA when disabling. */
I915_WRITE(HWS_PGA, 0x1ffff000);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 449157f..4bdccef 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -202,21 +202,17 @@
* reg, so dont bother to check the size */
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
- } else if (IS_I9XX(dev)) {
- uint32_t pitch_val = ffs(stride / tile_width) - 1;
-
- /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
- * instead of 4 (2KB) on 945s.
- */
- if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
- size > (I830_FENCE_MAX_SIZE_VAL << 20))
+ } else if (IS_GEN3(dev) || IS_GEN2(dev)) {
+ if (stride > 8192)
return false;
- } else {
- uint32_t pitch_val = ffs(stride / tile_width) - 1;
- if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
- size > (I830_FENCE_MAX_SIZE_VAL << 19))
- return false;
+ if (IS_GEN3(dev)) {
+ if (size > I830_FENCE_MAX_SIZE_VAL << 20)
+ return false;
+ } else {
+ if (size > I830_FENCE_MAX_SIZE_VAL << 19)
+ return false;
+ }
}
/* 965+ just needs multiples of tile width */
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 6421481..2b8b969 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -349,7 +349,7 @@
READ_BREADCRUMB(dev_priv);
}
- if (gt_iir & GT_USER_INTERRUPT) {
+ if (gt_iir & GT_PIPE_NOTIFY) {
u32 seqno = i915_get_gem_seqno(dev);
dev_priv->mm.irq_gem_seqno = seqno;
trace_i915_gem_request_complete(dev, seqno);
@@ -1005,7 +1005,7 @@
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
if (HAS_PCH_SPLIT(dev))
- ironlake_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+ ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
else
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
}
@@ -1021,7 +1021,7 @@
BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
if (HAS_PCH_SPLIT(dev))
- ironlake_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+ ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
else
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
}
@@ -1305,7 +1305,7 @@
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
- u32 render_mask = GT_USER_INTERRUPT;
+ u32 render_mask = GT_PIPE_NOTIFY;
u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 7cc8410..8fcc75c 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -382,8 +382,57 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
struct drm_connector *connector;
+ acpi_handle handle;
+ struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
+ unsigned long long device_id;
+ acpi_status status;
int i = 0;
+ handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
+ return;
+
+ if (acpi_is_video_device(acpi_dev))
+ acpi_video_bus = acpi_dev;
+ else {
+ list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
+ if (acpi_is_video_device(acpi_cdev)) {
+ acpi_video_bus = acpi_cdev;
+ break;
+ }
+ }
+ }
+
+ if (!acpi_video_bus) {
+ printk(KERN_WARNING "No ACPI video bus found\n");
+ return;
+ }
+
+ list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
+ if (i >= 8) {
+ dev_printk (KERN_ERR, &dev->pdev->dev,
+ "More than 8 outputs detected\n");
+ return;
+ }
+ status =
+ acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
+ NULL, &device_id);
+ if (ACPI_SUCCESS(status)) {
+ if (!device_id)
+ goto blind_set;
+ opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
+ i++;
+ }
+ }
+
+end:
+ /* If fewer than 8 outputs, the list must be null terminated */
+ if (i < 8)
+ opregion->acpi->didl[i] = 0;
+ return;
+
+blind_set:
+ i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
int output_type = ACPI_OTHER_OUTPUT;
if (i >= 8) {
@@ -416,10 +465,7 @@
opregion->acpi->didl[i] |= (1<<31) | output_type | i;
i++;
}
-
- /* If fewer than 8 outputs, the list must be null terminated */
- if (i < 8)
- opregion->acpi->didl[i] = 0;
+ goto end;
}
int intel_opregion_init(struct drm_device *dev, int resume)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cbbf59f..4cbc521 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -230,6 +230,16 @@
#define ASYNC_FLIP (1<<22)
#define DISPLAY_PLANE_A (0<<20)
#define DISPLAY_PLANE_B (1<<20)
+#define GFX_OP_PIPE_CONTROL ((0x3<<29)|(0x3<<27)|(0x2<<24)|2)
+#define PIPE_CONTROL_QW_WRITE (1<<14)
+#define PIPE_CONTROL_DEPTH_STALL (1<<13)
+#define PIPE_CONTROL_WC_FLUSH (1<<12)
+#define PIPE_CONTROL_IS_FLUSH (1<<11) /* MBZ on Ironlake */
+#define PIPE_CONTROL_TC_FLUSH (1<<10) /* GM45+ only */
+#define PIPE_CONTROL_ISP_DIS (1<<9)
+#define PIPE_CONTROL_NOTIFY (1<<8)
+#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+#define PIPE_CONTROL_STALL_EN (1<<1) /* in addr word, Ironlake+ only */
/*
* Fence registers
@@ -241,7 +251,7 @@
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 4
#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
@@ -2285,6 +2295,7 @@
#define DEIER 0x4400c
/* GT interrupt */
+#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e7356fb..c7502b6 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4853,17 +4853,18 @@
dev_priv->display.update_wm = g4x_update_wm;
else if (IS_I965G(dev))
dev_priv->display.update_wm = i965_update_wm;
- else if (IS_I9XX(dev) || IS_MOBILE(dev)) {
+ else if (IS_I9XX(dev)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
+ } else if (IS_I85X(dev)) {
+ dev_priv->display.update_wm = i9xx_update_wm;
+ dev_priv->display.get_fifo_size = i85x_get_fifo_size;
} else {
- if (IS_I85X(dev))
- dev_priv->display.get_fifo_size = i85x_get_fifo_size;
- else if (IS_845G(dev))
+ dev_priv->display.update_wm = i830_update_wm;
+ if (IS_845G(dev))
dev_priv->display.get_fifo_size = i845_get_fifo_size;
else
dev_priv->display.get_fifo_size = i830_get_fifo_size;
- dev_priv->display.update_wm = i830_update_wm;
}
}
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 6732b5d..27e2c71 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2912,7 +2912,7 @@
UCHAR ucTV_BootUpDefaultStandard;
UCHAR ucExt_TV_ASIC_ID;
UCHAR ucExt_TV_ASIC_SlaveAddr;
- ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2];
}ATOM_ANALOG_TV_INFO_V1_2;
typedef struct _ATOM_DPCD_INFO
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index d7388fd..cf60c0b 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -2975,7 +2975,7 @@
for (i = 0; i < track->num_cb; i++) {
if (track->cb[i].robj == NULL) {
- if (!(track->fastfill || track->color_channel_mask ||
+ if (!(track->zb_cb_clear || track->color_channel_mask ||
track->blend_read_enable)) {
continue;
}
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index fadfe68..f47cdca 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -75,7 +75,7 @@
struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE];
bool z_enabled;
bool separate_cube;
- bool fastfill;
+ bool zb_cb_clear;
bool blend_read_enable;
};
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index bd75f99..a5ff807 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -324,13 +324,12 @@
uint32_t gb_tile_config, tmp;
r100_hdp_reset(rdev);
- /* FIXME: rv380 one pipes ? */
if ((rdev->family == CHIP_R300 && rdev->pdev->device != 0x4144) ||
- (rdev->family == CHIP_R350)) {
+ (rdev->family == CHIP_R350 && rdev->pdev->device != 0x4148)) {
/* r300,r350 */
rdev->num_gb_pipes = 2;
} else {
- /* rv350,rv370,rv380,r300 AD */
+ /* rv350,rv370,rv380,r300 AD, r350 AH */
rdev->num_gb_pipes = 1;
}
rdev->num_z_pipes = 1;
@@ -1045,7 +1044,7 @@
break;
case 0x4d1c:
/* ZB_BW_CNTL */
- track->fastfill = !!(idx_value & (1 << 2));
+ track->zb_cb_clear = !!(idx_value & (1 << 5));
break;
case 0x4e04:
/* RB3D_BLENDCNTL */
diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index ea46d55..c5c2742 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -921,7 +921,7 @@
ptr_addr = drm_buffer_read_object(cmdbuf->buffer,
sizeof(stack_ptr_addr), &stack_ptr_addr);
- ref_age_base = (u32 *)(unsigned long)*ptr_addr;
+ ref_age_base = (u32 *)(unsigned long)get_unaligned(ptr_addr);
for (i=0; i < header.scratch.n_bufs; i++) {
buf_idx = drm_buffer_pointer_to_dword(cmdbuf->buffer, 0);
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 3dc968c..c2bda4a 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -59,6 +59,12 @@
/* get max number of pipes */
gb_pipe_select = RREG32(0x402C);
num_pipes = ((gb_pipe_select >> 12) & 3) + 1;
+
+ /* SE chips have 1 pipe */
+ if ((rdev->pdev->device == 0x5e4c) ||
+ (rdev->pdev->device == 0x5e4f))
+ num_pipes = 1;
+
rdev->num_gb_pipes = num_pipes;
tmp = 0;
switch (num_pipes) {
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index c445779..28e473f 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -134,12 +134,10 @@
int ret;
/* Acquire AGP. */
- if (!rdev->ddev->agp->acquired) {
- ret = drm_agp_acquire(rdev->ddev);
- if (ret) {
- DRM_ERROR("Unable to acquire AGP: %d\n", ret);
- return ret;
- }
+ ret = drm_agp_acquire(rdev->ddev);
+ if (ret) {
+ DRM_ERROR("Unable to acquire AGP: %d\n", ret);
+ return ret;
}
ret = drm_agp_info(rdev->ddev, &info);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 5673665..9916d825 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1264,7 +1264,7 @@
switch (crev) {
case 1:
tv_info = (ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset);
- if (index > MAX_SUPPORTED_TV_TIMING)
+ if (index >= MAX_SUPPORTED_TV_TIMING)
return false;
mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total);
@@ -1302,7 +1302,7 @@
break;
case 2:
tv_info_v1_2 = (ATOM_ANALOG_TV_INFO_V1_2 *)(mode_info->atom_context->bios + data_offset);
- if (index > MAX_SUPPORTED_TV_TIMING_V1_2)
+ if (index >= MAX_SUPPORTED_TV_TIMING_V1_2)
return false;
dtd_timings = &tv_info_v1_2->aModeTimings[index];
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 1331351..4559a53 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1316,6 +1316,8 @@
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
goto failed;
+ }
+ if (connector_type == DRM_MODE_CONNECTOR_DVII) {
radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 419630d..2f042a3 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -435,14 +435,19 @@
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
+ /* SE cards have 1 pipe */
+ if ((dev->pdev->device == 0x5e4c) ||
+ (dev->pdev->device == 0x5e4f))
+ dev_priv->num_gb_pipes = 1;
} else {
/* R3xx */
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300 &&
dev->pdev->device != 0x4144) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350 &&
+ dev->pdev->device != 0x4148)) {
dev_priv->num_gb_pipes = 2;
} else {
- /* RV3xx/R300 AD */
+ /* RV3xx/R300 AD/R350 AH */
dev_priv->num_gb_pipes = 1;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index b8d6728..bb1c122 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -86,12 +86,12 @@
WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_GREEN + radeon_crtc->crtc_offset, 0xffff);
WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_RED + radeon_crtc->crtc_offset, 0xffff);
- WREG32(EVERGREEN_DC_LUT_RW_MODE, radeon_crtc->crtc_id);
- WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK, 0x00000007);
+ WREG32(EVERGREEN_DC_LUT_RW_MODE + radeon_crtc->crtc_offset, 0);
+ WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK + radeon_crtc->crtc_offset, 0x00000007);
- WREG32(EVERGREEN_DC_LUT_RW_INDEX, 0);
+ WREG32(EVERGREEN_DC_LUT_RW_INDEX + radeon_crtc->crtc_offset, 0);
for (i = 0; i < 256; i++) {
- WREG32(EVERGREEN_DC_LUT_30_COLOR,
+ WREG32(EVERGREEN_DC_LUT_30_COLOR + radeon_crtc->crtc_offset,
(radeon_crtc->lut_r[i] << 20) |
(radeon_crtc->lut_g[i] << 10) |
(radeon_crtc->lut_b[i] << 0));
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 30293be..c5ddaf5 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -254,6 +254,53 @@
return dig_connector;
}
+void radeon_panel_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+ unsigned hblank = native_mode->htotal - native_mode->hdisplay;
+ unsigned vblank = native_mode->vtotal - native_mode->vdisplay;
+ unsigned hover = native_mode->hsync_start - native_mode->hdisplay;
+ unsigned vover = native_mode->vsync_start - native_mode->vdisplay;
+ unsigned hsync_width = native_mode->hsync_end - native_mode->hsync_start;
+ unsigned vsync_width = native_mode->vsync_end - native_mode->vsync_start;
+
+ adjusted_mode->clock = native_mode->clock;
+ adjusted_mode->flags = native_mode->flags;
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ adjusted_mode->hdisplay = native_mode->hdisplay;
+ adjusted_mode->vdisplay = native_mode->vdisplay;
+ }
+
+ adjusted_mode->htotal = native_mode->hdisplay + hblank;
+ adjusted_mode->hsync_start = native_mode->hdisplay + hover;
+ adjusted_mode->hsync_end = adjusted_mode->hsync_start + hsync_width;
+
+ adjusted_mode->vtotal = native_mode->vdisplay + vblank;
+ adjusted_mode->vsync_start = native_mode->vdisplay + vover;
+ adjusted_mode->vsync_end = adjusted_mode->vsync_start + vsync_width;
+
+ drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ adjusted_mode->crtc_hdisplay = native_mode->hdisplay;
+ adjusted_mode->crtc_vdisplay = native_mode->vdisplay;
+ }
+
+ adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + hblank;
+ adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + hover;
+ adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + hsync_width;
+
+ adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + vblank;
+ adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + vover;
+ adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + vsync_width;
+
+}
+
static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -275,18 +322,8 @@
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
/* get the native mode for LVDS */
- if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
- struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- int mode_id = adjusted_mode->base.id;
- *adjusted_mode = *native_mode;
- if (!ASIC_IS_AVIVO(rdev)) {
- adjusted_mode->hdisplay = mode->hdisplay;
- adjusted_mode->vdisplay = mode->vdisplay;
- adjusted_mode->crtc_hdisplay = mode->hdisplay;
- adjusted_mode->crtc_vdisplay = mode->vdisplay;
- }
- adjusted_mode->base.id = mode_id;
- }
+ if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+ radeon_panel_mode_fixup(encoder, adjusted_mode);
/* get the native mode for TV */
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
@@ -1326,7 +1363,7 @@
radeon_encoder->pixel_clock = adjusted_mode->clock;
- if (ASIC_IS_AVIVO(rdev)) {
+ if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
atombios_yuv_setup(encoder, true);
else
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index d3657dc..c633319f 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -165,7 +165,7 @@
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return -EINVAL;
}
@@ -177,7 +177,7 @@
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return -EINVAL;
}
@@ -191,7 +191,7 @@
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return;
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 2441cca..0274abe 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -228,16 +228,8 @@
drm_mode_set_crtcinfo(adjusted_mode, 0);
/* get the native mode for LVDS */
- if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
- struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- int mode_id = adjusted_mode->base.id;
- *adjusted_mode = *native_mode;
- adjusted_mode->hdisplay = mode->hdisplay;
- adjusted_mode->vdisplay = mode->vdisplay;
- adjusted_mode->crtc_hdisplay = mode->hdisplay;
- adjusted_mode->crtc_vdisplay = mode->vdisplay;
- adjusted_mode->base.id = mode_id;
- }
+ if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+ radeon_panel_mode_fixup(encoder, adjusted_mode);
return true;
}
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 0b8e327..5413fcd6 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -558,6 +558,8 @@
bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+void radeon_panel_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *adjusted_mode);
void atom_rv515_force_tv_scaler(struct radeon_device *rdev, struct radeon_crtc *radeon_crtc);
/* legacy tv */
diff --git a/drivers/gpu/drm/via/via_video.c b/drivers/gpu/drm/via/via_video.c
index 6ec04ac..6efac81 100644
--- a/drivers/gpu/drm/via/via_video.c
+++ b/drivers/gpu/drm/via/via_video.c
@@ -75,7 +75,7 @@
DRM_DEBUG("\n");
- if (fx->lock > VIA_NR_XVMC_LOCKS)
+ if (fx->lock >= VIA_NR_XVMC_LOCKS)
return -EFAULT;
lock = (volatile int *)XVMCLOCKPTR(sAPriv, fx->lock);
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index d6d1149..c8768f3 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -276,8 +276,10 @@
mutex_lock(&vgasr_mutex);
- if (!vgasr_priv.active)
- return -EINVAL;
+ if (!vgasr_priv.active) {
+ cnt = -EINVAL;
+ goto out;
+ }
/* pwr off the device not in use */
if (strncmp(usercmd, "OFF", 3) == 0) {
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 75f3fa5..16c4202 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -1169,15 +1169,19 @@
int err;
list_for_each_entry(s, &data->sensor_list, list) {
+ sysfs_attr_init(&s->input_attr.attr);
err = device_create_file(data->hwmon_dev, &s->input_attr);
if (err)
return err;
+ sysfs_attr_init(&s->label_attr.attr);
err = device_create_file(data->hwmon_dev, &s->label_attr);
if (err)
return err;
+ sysfs_attr_init(&s->limit1_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit1_attr);
if (err)
return err;
+ sysfs_attr_init(&s->limit2_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit2_attr);
if (err)
return err;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index be475e8..c8ab505 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -217,6 +217,10 @@
AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
+ AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
+ AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
+ AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
+ AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7e27b7..d1ff940 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -146,10 +146,10 @@
"<%s> I2C Interrupted\n", __func__);
return -EINTR;
}
- if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+ if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C bus is busy\n", __func__);
- return -EIO;
+ return -ETIMEDOUT;
}
schedule();
}
@@ -444,6 +444,8 @@
result = i2c_imx_read(i2c_imx, &msgs[i]);
else
result = i2c_imx_write(i2c_imx, &msgs[i]);
+ if (result)
+ goto fail0;
}
fail0:
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index a2481f40..0e9f85d 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -447,7 +447,7 @@
/**
* octeon_i2c_setclock - Calculate and set clock divisors.
*/
-static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -490,7 +490,7 @@
return 0;
}
-static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
{
u8 status;
int tries;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6bd0f19..389ac60 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -903,6 +903,11 @@
platform_set_drvdata(pdev, dev);
+ if (cpu_is_omap7xx())
+ dev->reg_shift = 1;
+ else
+ dev->reg_shift = 2;
+
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_iounmap;
@@ -926,11 +931,6 @@
dev->b_hw = 1; /* Enable hardware fixes */
}
- if (cpu_is_omap7xx())
- dev->reg_shift = 1;
- else
- dev->reg_shift = 2;
-
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 2471033..a97e3fe 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -173,6 +173,9 @@
/* We still have something to talk about... */
val = *alg_data->mif.buf++;
+ if (alg_data->mif.len == 1)
+ val |= stop_bit;
+
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
@@ -246,6 +249,9 @@
__func__);
if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
/*
* Enable interrupt RFDAIE (data in Rx fifo),
* and disable DRMIE (need data for Tx)
@@ -633,6 +639,8 @@
*/
tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ if (tmp > 0x3FF)
+ tmp = 0x3FF;
iowrite32(tmp, I2C_REG_CKH(alg_data));
iowrite32(tmp, I2C_REG_CKL(alg_data));
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 1f5b38b..495be45 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -498,7 +498,7 @@
int i = 0;
/* Locate the apropriate clock setting */
- while (i < ARRAY_SIZE(stu300_clktable) &&
+ while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
stu300_clktable[i].rate < clkrate)
i++;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 3202a86..c2258a5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -40,12 +40,11 @@
#include "i2c-core.h"
-/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
+/* core_lock protects i2c_adapter_idr, and guarantees
that device detection, deletion of detected devices, and attach_adapter
and detach_adapter calls are serialized */
static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
-static LIST_HEAD(userspace_devices);
static struct device_type i2c_client_type;
static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
@@ -117,8 +116,10 @@
dev_dbg(dev, "probe\n");
status = driver->probe(client, i2c_match_id(driver->id_table, client));
- if (status)
+ if (status) {
client->driver = NULL;
+ i2c_set_clientdata(client, NULL);
+ }
return status;
}
@@ -139,8 +140,10 @@
dev->driver = NULL;
status = 0;
}
- if (status == 0)
+ if (status == 0) {
client->driver = NULL;
+ i2c_set_clientdata(client, NULL);
+ }
return status;
}
@@ -538,9 +541,9 @@
return -EEXIST;
/* Keep track of the added device */
- mutex_lock(&core_lock);
- list_add_tail(&client->detected, &userspace_devices);
- mutex_unlock(&core_lock);
+ i2c_lock_adapter(adap);
+ list_add_tail(&client->detected, &adap->userspace_clients);
+ i2c_unlock_adapter(adap);
dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
info.type, info.addr);
@@ -579,9 +582,10 @@
/* Make sure the device was added through sysfs */
res = -ENOENT;
- mutex_lock(&core_lock);
- list_for_each_entry_safe(client, next, &userspace_devices, detected) {
- if (client->addr == addr && client->adapter == adap) {
+ i2c_lock_adapter(adap);
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ if (client->addr == addr) {
dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
"delete_device", client->name, client->addr);
@@ -591,7 +595,7 @@
break;
}
}
- mutex_unlock(&core_lock);
+ i2c_unlock_adapter(adap);
if (res < 0)
dev_err(dev, "%s: Can't find device in list\n",
@@ -673,6 +677,7 @@
}
rt_mutex_init(&adap->bus_lock);
+ INIT_LIST_HEAD(&adap->userspace_clients);
/* Set default timeout to 1 second if not already set */
if (adap->timeout == 0)
@@ -875,14 +880,15 @@
return res;
/* Remove devices instantiated from sysfs */
- list_for_each_entry_safe(client, next, &userspace_devices, detected) {
- if (client->adapter == adap) {
- dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
- client->name, client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
+ i2c_lock_adapter(adap);
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+ client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
}
+ i2c_unlock_adapter(adap);
/* Detach any active clients. This can't fail, thus we do not
checking the returned value. */
@@ -1260,12 +1266,23 @@
return 0;
/* Make sure there is something at this address */
- if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
- return 0;
+ if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) {
+ /* Special probe for FSC hwmon chips */
+ union i2c_smbus_data dummy;
- /* Prevent 24RF08 corruption */
- if ((addr & ~0x0f) == 0x50)
- i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
+ if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &dummy) < 0)
+ return 0;
+ } else {
+ if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
+
+ /* Prevent 24RF08 corruption */
+ if ((addr & ~0x0f) == 0x50)
+ i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL);
+ }
/* Finally call the custom detection function */
memset(&info, 0, sizeof(struct i2c_board_info));
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index ab87e4f..defce28 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -409,6 +409,8 @@
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
@@ -429,6 +431,8 @@
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index c52bec4..423e0e6 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -929,6 +929,24 @@
.evbit = { BIT_MASK(EV_ABS) },
.absbit = { BIT_MASK(ABS_THROTTLE) },
},
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) },
+ },
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) },
+ },
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) },
+ },
{ } /* Terminating entry */
};
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index 614b65d..e8bbc61 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -98,10 +98,12 @@
* Module and Version Information, Module Parameters
*/
-#define ATI_REMOTE_VENDOR_ID 0x0bc7
-#define ATI_REMOTE_PRODUCT_ID 0x004
-#define LOLA_REMOTE_PRODUCT_ID 0x002
-#define MEDION_REMOTE_PRODUCT_ID 0x006
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID 0x0002
+#define LOLA2_REMOTE_PRODUCT_ID 0x0003
+#define ATI_REMOTE_PRODUCT_ID 0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
+#define MEDION_REMOTE_PRODUCT_ID 0x0006
#define DRIVER_VERSION "2.2.1"
#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
@@ -142,8 +144,10 @@
#define err(format, arg...) printk(KERN_ERR format , ## arg)
static struct usb_device_id ati_remote_table[] = {
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
{} /* Terminating entry */
};
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 0d22cb9..99d5876 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -64,7 +64,6 @@
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
- { { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, /* HP Pavilion dm3 */
{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
};
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index a138b5d..0520c2e 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -25,6 +25,10 @@
printk(KERN_DEBUG format, ##arg); \
} while (0)
+static bool force_elantech;
+module_param_named(force_elantech, force_elantech, bool, 0644);
+MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
+
/*
* Send a Synaptics style sliced query command
*/
@@ -182,13 +186,17 @@
static int old_fingers;
if (etd->fw_version_maj == 0x01) {
- /* byte 0: D U p1 p2 1 p3 R L
- byte 1: f 0 th tw x9 x8 y9 y8 */
+ /*
+ * byte 0: D U p1 p2 1 p3 R L
+ * byte 1: f 0 th tw x9 x8 y9 y8
+ */
fingers = ((packet[1] & 0x80) >> 7) +
((packet[1] & 0x30) >> 4);
} else {
- /* byte 0: n1 n0 p2 p1 1 p3 R L
- byte 1: 0 0 0 0 x9 x8 y9 y8 */
+ /*
+ * byte 0: n1 n0 p2 p1 1 p3 R L
+ * byte 1: 0 0 0 0 x9 x8 y9 y8
+ */
fingers = (packet[0] & 0xc0) >> 6;
}
@@ -202,13 +210,15 @@
input_report_key(dev, BTN_TOUCH, fingers != 0);
- /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
- byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */
+ /*
+ * byte 2: x7 x6 x5 x4 x3 x2 x1 x0
+ * byte 3: y7 y6 y5 y4 y3 y2 y1 y0
+ */
if (fingers) {
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
- input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
- (((packet[1] & 0x03) << 8) | packet[3]));
+ input_report_abs(dev, ABS_Y,
+ ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
@@ -247,34 +257,47 @@
switch (fingers) {
case 1:
- /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8
- byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */
- input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
- /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8
- byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */
- input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
- ((packet[4] << 8) | packet[5]));
+ /*
+ * byte 1: . . . . . x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ input_report_abs(dev, ABS_X,
+ ((packet[1] & 0x07) << 8) | packet[2]);
+ /*
+ * byte 4: . . . . . . y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ input_report_abs(dev, ABS_Y,
+ ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
break;
case 2:
- /* The coordinate of each finger is reported separately with
- a lower resolution for two finger touches */
- /* byte 0: . . ay8 ax8 . . . .
- byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
+ /*
+ * The coordinate of each finger is reported separately
+ * with a lower resolution for two finger touches:
+ * byte 0: . . ay8 ax8 . . . .
+ * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
x1 = ((packet[0] & 0x10) << 4) | packet[1];
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
- /* byte 3: . . by8 bx8 . . . .
- byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
+ /*
+ * byte 3: . . by8 bx8 . . . .
+ * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
+ */
x2 = ((packet[3] & 0x10) << 4) | packet[4];
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
- /* For compatibility with the X Synaptics driver scale up one
- coordinate and report as ordinary mouse movent */
+ /*
+ * For compatibility with the X Synaptics driver scale up
+ * one coordinate and report as ordinary mouse movent
+ */
input_report_abs(dev, ABS_X, x1 << 2);
input_report_abs(dev, ABS_Y, y1 << 2);
- /* For compatibility with the proprietary X Elantech driver
- report both coordinates as hat coordinates */
+ /*
+ * For compatibility with the proprietary X Elantech driver
+ * report both coordinates as hat coordinates
+ */
input_report_abs(dev, ABS_HAT0X, x1);
input_report_abs(dev, ABS_HAT0Y, y1);
input_report_abs(dev, ABS_HAT1X, x2);
@@ -596,8 +619,12 @@
param[0], param[1], param[2]);
if (param[0] == 0 || param[1] != 0) {
- pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
- return -1;
+ if (!force_elantech) {
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+ return -1;
+ }
+
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
}
if (set_properties) {
@@ -666,7 +693,8 @@
* Assume every version greater than this is new EeePC style
* hardware with 6 byte packets
*/
- if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
+ if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
+ etd->fw_version_maj > 0x02) {
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index d8c0c8d..cbc8072 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -110,6 +110,7 @@
struct psmouse_protocol {
enum psmouse_type type;
bool maxproto;
+ bool ignore_parity; /* Protocol should ignore parity errors from KBC */
const char *name;
const char *alias;
int (*detect)(struct psmouse *, bool);
@@ -288,7 +289,9 @@
if (psmouse->state == PSMOUSE_IGNORE)
goto out;
- if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) {
+ if (unlikely((flags & SERIO_TIMEOUT) ||
+ ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
+
if (psmouse->state == PSMOUSE_ACTIVATED)
printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
flags & SERIO_TIMEOUT ? " timeout" : "",
@@ -759,6 +762,7 @@
.name = "PS/2",
.alias = "bare",
.maxproto = true,
+ .ignore_parity = true,
.detect = ps2bare_detect,
},
#ifdef CONFIG_MOUSE_PS2_LOGIPS2PP
@@ -786,6 +790,7 @@
.name = "ImPS/2",
.alias = "imps",
.maxproto = true,
+ .ignore_parity = true,
.detect = intellimouse_detect,
},
{
@@ -793,6 +798,7 @@
.name = "ImExPS/2",
.alias = "exps",
.maxproto = true,
+ .ignore_parity = true,
.detect = im_explorer_detect,
},
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
@@ -1222,6 +1228,7 @@
static int psmouse_switch_protocol(struct psmouse *psmouse,
const struct psmouse_protocol *proto)
{
+ const struct psmouse_protocol *selected_proto;
struct input_dev *input_dev = psmouse->dev;
input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
@@ -1245,9 +1252,14 @@
return -1;
psmouse->type = proto->type;
- } else
+ selected_proto = proto;
+ } else {
psmouse->type = psmouse_extensions(psmouse,
psmouse_max_proto, true);
+ selected_proto = psmouse_protocol_by_type(psmouse->type);
+ }
+
+ psmouse->ignore_parity = selected_proto->ignore_parity;
/*
* If mouse's packet size is 3 there is no point in polling the
@@ -1267,7 +1279,7 @@
psmouse->resync_time = 0;
snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s",
- psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
+ selected_proto->name, psmouse->vendor, psmouse->name);
input_dev->name = psmouse->devname;
input_dev->phys = psmouse->phys;
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index e053bdd..593e910 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -47,6 +47,7 @@
unsigned char pktcnt;
unsigned char pktsize;
unsigned char type;
+ bool ignore_parity;
bool acks_disable_command;
unsigned int model;
unsigned long last;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 026df60..ebd7a99 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -137,7 +137,8 @@
if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
return -1;
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
- priv->ext_cap = 0;
+ priv->ext_cap = priv->ext_cap_0c = 0;
+
if (!SYN_CAP_VALID(priv->capabilities))
return -1;
@@ -150,7 +151,7 @@
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capabilities,"
- " but I'm not able to read them.");
+ " but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
@@ -162,6 +163,16 @@
priv->ext_cap &= 0xff0fff;
}
}
+
+ if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
+ printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+ " but I'm not able to read it.\n");
+ } else {
+ priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
+ }
+ }
+
return 0;
}
@@ -348,7 +359,15 @@
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /*
+ * Clickpad's button is transmitted as middle button,
+ * however, since it is primary button, we will report
+ * it as BTN_LEFT.
+ */
+ hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
+
+ } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
if (hw->w == 2)
hw->scroll = (signed char)(buf[1]);
@@ -593,6 +612,12 @@
dev->absres[ABS_X] = priv->x_res;
dev->absres[ABS_Y] = priv->y_res;
+
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /* Clickpads report only left button */
+ __clear_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+ }
}
static void synaptics_disconnect(struct psmouse *psmouse)
@@ -697,10 +722,10 @@
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+ printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
- priv->model_id, priv->capabilities, priv->ext_cap);
+ priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index f0f40a3..ae37c5d 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -18,6 +18,7 @@
#define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
+#define SYN_QUE_EXT_CAPAB_0C 0x0c
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
@@ -48,6 +49,8 @@
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
+#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -96,6 +99,7 @@
unsigned long int model_id; /* Model-ID */
unsigned long int capabilities; /* Capabilities */
unsigned long int ext_cap; /* Extended Capabilities */
+ unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
int x_res; /* X resolution in units/mm */
int y_res; /* Y resolution in units/mm */
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 204b8a1..75f8b73 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -124,14 +124,25 @@
return IRQ_HANDLED;
}
-static int eeti_ts_open(struct input_dev *dev)
+static void eeti_ts_start(struct eeti_ts_priv *priv)
{
- struct eeti_ts_priv *priv = input_get_drvdata(dev);
-
enable_irq(priv->irq);
/* Read the events once to arm the IRQ */
eeti_ts_read(&priv->work);
+}
+
+static void eeti_ts_stop(struct eeti_ts_priv *priv)
+{
+ disable_irq(priv->irq);
+ cancel_work_sync(&priv->work);
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+ struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+ eeti_ts_start(priv);
return 0;
}
@@ -140,8 +151,7 @@
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
- disable_irq(priv->irq);
- cancel_work_sync(&priv->work);
+ eeti_ts_stop(priv);
}
static int __devinit eeti_ts_probe(struct i2c_client *client,
@@ -153,10 +163,12 @@
unsigned int irq_flags;
int err = -ENOMEM;
- /* In contrast to what's described in the datasheet, there seems
+ /*
+ * In contrast to what's described in the datasheet, there seems
* to be no way of probing the presence of that device using I2C
* commands. So we need to blindly believe it is there, and wait
- * for interrupts to occur. */
+ * for interrupts to occur.
+ */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
@@ -212,9 +224,11 @@
goto err2;
}
- /* Disable the irq for now. It will be enabled once the input device
- * is opened. */
- disable_irq(priv->irq);
+ /*
+ * Disable the device for now. It will be enabled once the
+ * input device is opened.
+ */
+ eeti_ts_stop(priv);
device_init_wakeup(&client->dev, 0);
return 0;
@@ -235,6 +249,12 @@
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
+ /*
+ * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
+ * so that device still works if we reload the driver.
+ */
+ enable_irq(priv->irq);
+
input_unregister_device(priv->input);
i2c_set_clientdata(client, NULL);
kfree(priv);
@@ -246,6 +266,14 @@
static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+ struct input_dev *input_dev = priv->input;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ eeti_ts_stop(priv);
+
+ mutex_unlock(&input_dev->mutex);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
@@ -256,10 +284,18 @@
static int eeti_ts_resume(struct i2c_client *client)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+ struct input_dev *input_dev = priv->input;
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ eeti_ts_start(priv);
+
+ mutex_unlock(&input_dev->mutex);
+
return 0;
}
#else
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e3e9a36..58ea0ec 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1650,8 +1650,8 @@
int previous, int *dd_idx,
struct stripe_head *sh)
{
- long stripe;
- unsigned long chunk_number;
+ sector_t stripe, stripe2;
+ sector_t chunk_number;
unsigned int chunk_offset;
int pd_idx, qd_idx;
int ddf_layout = 0;
@@ -1671,18 +1671,13 @@
*/
chunk_offset = sector_div(r_sector, sectors_per_chunk);
chunk_number = r_sector;
- BUG_ON(r_sector != chunk_number);
/*
* Compute the stripe number
*/
- stripe = chunk_number / data_disks;
-
- /*
- * Compute the data disk and parity disk indexes inside the stripe
- */
- *dd_idx = chunk_number % data_disks;
-
+ stripe = chunk_number;
+ *dd_idx = sector_div(stripe, data_disks);
+ stripe2 = stripe;
/*
* Select the parity disk based on the user selected algorithm.
*/
@@ -1694,21 +1689,21 @@
case 5:
switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- pd_idx = data_disks - stripe % raid_disks;
+ pd_idx = data_disks - sector_div(stripe2, raid_disks);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_LEFT_SYMMETRIC:
- pd_idx = data_disks - stripe % raid_disks;
+ pd_idx = data_disks - sector_div(stripe2, raid_disks);
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
break;
case ALGORITHM_PARITY_0:
@@ -1728,7 +1723,7 @@
switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
@@ -1737,7 +1732,7 @@
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
@@ -1746,12 +1741,12 @@
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_LEFT_SYMMETRIC:
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + 1) % raid_disks;
*dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + 1) % raid_disks;
*dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
break;
@@ -1770,7 +1765,7 @@
/* Exactly the same as RIGHT_ASYMMETRIC, but or
* of blocks for computing Q is different.
*/
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
@@ -1785,7 +1780,8 @@
* D D D P Q rather than
* Q D D D P
*/
- pd_idx = raid_disks - 1 - ((stripe + 1) % raid_disks);
+ stripe2 += 1;
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
@@ -1797,7 +1793,7 @@
case ALGORITHM_ROTATING_N_CONTINUE:
/* Same as left_symmetric but Q is before P */
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
ddf_layout = 1;
@@ -1805,27 +1801,27 @@
case ALGORITHM_LEFT_ASYMMETRIC_6:
/* RAID5 left_asymmetric, with Q on last device */
- pd_idx = data_disks - stripe % (raid_disks-1);
+ pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
qd_idx = raid_disks - 1;
break;
case ALGORITHM_RIGHT_ASYMMETRIC_6:
- pd_idx = stripe % (raid_disks-1);
+ pd_idx = sector_div(stripe2, raid_disks-1);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
qd_idx = raid_disks - 1;
break;
case ALGORITHM_LEFT_SYMMETRIC_6:
- pd_idx = data_disks - stripe % (raid_disks-1);
+ pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
*dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
qd_idx = raid_disks - 1;
break;
case ALGORITHM_RIGHT_SYMMETRIC_6:
- pd_idx = stripe % (raid_disks-1);
+ pd_idx = sector_div(stripe2, raid_disks-1);
*dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
qd_idx = raid_disks - 1;
break;
@@ -1870,14 +1866,14 @@
: conf->algorithm;
sector_t stripe;
int chunk_offset;
- int chunk_number, dummy1, dd_idx = i;
+ sector_t chunk_number;
+ int dummy1, dd_idx = i;
sector_t r_sector;
struct stripe_head sh2;
chunk_offset = sector_div(new_sector, sectors_per_chunk);
stripe = new_sector;
- BUG_ON(new_sector != stripe);
if (i == sh->pd_idx)
return 0;
@@ -1970,7 +1966,7 @@
}
chunk_number = stripe * data_disks + i;
- r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
+ r_sector = chunk_number * sectors_per_chunk + chunk_offset;
check = raid5_compute_sector(conf, r_sector,
previous, &dummy1, &sh2);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2191c8d..0d0d625 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -311,6 +311,22 @@
This driver can also be built as a module. If so, the module
will be calles ti_dac7512.
+config VMWARE_BALLOON
+ tristate "VMware Balloon Driver"
+ depends on X86
+ help
+ This is VMware physical memory management driver which acts
+ like a "balloon" that can be inflated to reclaim physical pages
+ by reserving them in the guest and invalidating them in the
+ monitor, freeing up the underlying machine pages so they can
+ be allocated to other guests. The balloon can also be deflated
+ to allow the guest to use more physical memory.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmware_balloon.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 27c4843..7b6f7ee 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -29,3 +29,4 @@
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
new file mode 100644
index 0000000..e7161c4
--- /dev/null
+++ b/drivers/misc/vmware_balloon.c
@@ -0,0 +1,832 @@
+/*
+ * VMware Balloon driver.
+ *
+ * Copyright (C) 2000-2010, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained by: Dmitry Torokhov <dtor@vmware.com>
+ */
+
+/*
+ * This is VMware physical memory management driver for Linux. The driver
+ * acts like a "balloon" that can be inflated to reclaim physical pages by
+ * reserving them in the guest and invalidating them in the monitor,
+ * freeing up the underlying machine pages so they can be allocated to
+ * other guests. The balloon can also be deflated to allow the guest to
+ * use more physical memory. Higher level policies can control the sizes
+ * of balloons in VMs in order to manage physical memory resources.
+ */
+
+//#define DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/vmware.h>
+
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
+MODULE_VERSION("1.2.1.0-K");
+MODULE_ALIAS("dmi:*:svnVMware*:*");
+MODULE_ALIAS("vmware_vmmemctl");
+MODULE_LICENSE("GPL");
+
+/*
+ * Various constants controlling rate of inflaint/deflating balloon,
+ * measured in pages.
+ */
+
+/*
+ * Rate of allocating memory when there is no memory pressure
+ * (driver performs non-sleeping allocations).
+ */
+#define VMW_BALLOON_NOSLEEP_ALLOC_MAX 16384U
+
+/*
+ * Rates of memory allocaton when guest experiences memory pressure
+ * (driver performs sleeping allocations).
+ */
+#define VMW_BALLOON_RATE_ALLOC_MIN 512U
+#define VMW_BALLOON_RATE_ALLOC_MAX 2048U
+#define VMW_BALLOON_RATE_ALLOC_INC 16U
+
+/*
+ * Rates for releasing pages while deflating balloon.
+ */
+#define VMW_BALLOON_RATE_FREE_MIN 512U
+#define VMW_BALLOON_RATE_FREE_MAX 16384U
+#define VMW_BALLOON_RATE_FREE_INC 16U
+
+/*
+ * When guest is under memory pressure, use a reduced page allocation
+ * rate for next several cycles.
+ */
+#define VMW_BALLOON_SLOW_CYCLES 4
+
+/*
+ * Use __GFP_HIGHMEM to allow pages from HIGHMEM zone. We don't
+ * allow wait (__GFP_WAIT) for NOSLEEP page allocations. Use
+ * __GFP_NOWARN, to suppress page allocation failure warnings.
+ */
+#define VMW_PAGE_ALLOC_NOSLEEP (__GFP_HIGHMEM|__GFP_NOWARN)
+
+/*
+ * Use GFP_HIGHUSER when executing in a separate kernel thread
+ * context and allocation can sleep. This is less stressful to
+ * the guest memory system, since it allows the thread to block
+ * while memory is reclaimed, and won't take pages from emergency
+ * low-memory pools.
+ */
+#define VMW_PAGE_ALLOC_CANSLEEP (GFP_HIGHUSER)
+
+/* Maximum number of page allocations without yielding processor */
+#define VMW_BALLOON_YIELD_THRESHOLD 1024
+
+
+/*
+ * Hypervisor communication port definitions.
+ */
+#define VMW_BALLOON_HV_PORT 0x5670
+#define VMW_BALLOON_HV_MAGIC 0x456c6d6f
+#define VMW_BALLOON_PROTOCOL_VERSION 2
+#define VMW_BALLOON_GUEST_ID 1 /* Linux */
+
+#define VMW_BALLOON_CMD_START 0
+#define VMW_BALLOON_CMD_GET_TARGET 1
+#define VMW_BALLOON_CMD_LOCK 2
+#define VMW_BALLOON_CMD_UNLOCK 3
+#define VMW_BALLOON_CMD_GUEST_ID 4
+
+/* error codes */
+#define VMW_BALLOON_SUCCESS 0
+#define VMW_BALLOON_FAILURE -1
+#define VMW_BALLOON_ERROR_CMD_INVALID 1
+#define VMW_BALLOON_ERROR_PPN_INVALID 2
+#define VMW_BALLOON_ERROR_PPN_LOCKED 3
+#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4
+#define VMW_BALLOON_ERROR_PPN_PINNED 5
+#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6
+#define VMW_BALLOON_ERROR_RESET 7
+#define VMW_BALLOON_ERROR_BUSY 8
+
+#define VMWARE_BALLOON_CMD(cmd, data, result) \
+({ \
+ unsigned long __stat, __dummy1, __dummy2; \
+ __asm__ __volatile__ ("inl (%%dx)" : \
+ "=a"(__stat), \
+ "=c"(__dummy1), \
+ "=d"(__dummy2), \
+ "=b"(result) : \
+ "0"(VMW_BALLOON_HV_MAGIC), \
+ "1"(VMW_BALLOON_CMD_##cmd), \
+ "2"(VMW_BALLOON_HV_PORT), \
+ "3"(data) : \
+ "memory"); \
+ result &= -1UL; \
+ __stat & -1UL; \
+})
+
+#ifdef CONFIG_DEBUG_FS
+struct vmballoon_stats {
+ unsigned int timer;
+
+ /* allocation statustics */
+ unsigned int alloc;
+ unsigned int alloc_fail;
+ unsigned int sleep_alloc;
+ unsigned int sleep_alloc_fail;
+ unsigned int refused_alloc;
+ unsigned int refused_free;
+ unsigned int free;
+
+ /* monitor operations */
+ unsigned int lock;
+ unsigned int lock_fail;
+ unsigned int unlock;
+ unsigned int unlock_fail;
+ unsigned int target;
+ unsigned int target_fail;
+ unsigned int start;
+ unsigned int start_fail;
+ unsigned int guest_type;
+ unsigned int guest_type_fail;
+};
+
+#define STATS_INC(stat) (stat)++
+#else
+#define STATS_INC(stat)
+#endif
+
+struct vmballoon {
+
+ /* list of reserved physical pages */
+ struct list_head pages;
+
+ /* transient list of non-balloonable pages */
+ struct list_head refused_pages;
+
+ /* balloon size in pages */
+ unsigned int size;
+ unsigned int target;
+
+ /* reset flag */
+ bool reset_required;
+
+ /* adjustment rates (pages per second) */
+ unsigned int rate_alloc;
+ unsigned int rate_free;
+
+ /* slowdown page allocations for next few cycles */
+ unsigned int slow_allocation_cycles;
+
+#ifdef CONFIG_DEBUG_FS
+ /* statistics */
+ struct vmballoon_stats stats;
+
+ /* debugfs file exporting statistics */
+ struct dentry *dbg_entry;
+#endif
+
+ struct sysinfo sysinfo;
+
+ struct delayed_work dwork;
+};
+
+static struct vmballoon balloon;
+static struct workqueue_struct *vmballoon_wq;
+
+/*
+ * Send "start" command to the host, communicating supported version
+ * of the protocol.
+ */
+static bool vmballoon_send_start(struct vmballoon *b)
+{
+ unsigned long status, dummy;
+
+ STATS_INC(b->stats.start);
+
+ status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy);
+ if (status == VMW_BALLOON_SUCCESS)
+ return true;
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.start_fail);
+ return false;
+}
+
+static bool vmballoon_check_status(struct vmballoon *b, unsigned long status)
+{
+ switch (status) {
+ case VMW_BALLOON_SUCCESS:
+ return true;
+
+ case VMW_BALLOON_ERROR_RESET:
+ b->reset_required = true;
+ /* fall through */
+
+ default:
+ return false;
+ }
+}
+
+/*
+ * Communicate guest type to the host so that it can adjust ballooning
+ * algorithm to the one most appropriate for the guest. This command
+ * is normally issued after sending "start" command and is part of
+ * standard reset sequence.
+ */
+static bool vmballoon_send_guest_id(struct vmballoon *b)
+{
+ unsigned long status, dummy;
+
+ status = VMWARE_BALLOON_CMD(GUEST_ID, VMW_BALLOON_GUEST_ID, dummy);
+
+ STATS_INC(b->stats.guest_type);
+
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.guest_type_fail);
+ return false;
+}
+
+/*
+ * Retrieve desired balloon size from the host.
+ */
+static bool vmballoon_send_get_target(struct vmballoon *b, u32 *new_target)
+{
+ unsigned long status;
+ unsigned long target;
+ unsigned long limit;
+ u32 limit32;
+
+ /*
+ * si_meminfo() is cheap. Moreover, we want to provide dynamic
+ * max balloon size later. So let us call si_meminfo() every
+ * iteration.
+ */
+ si_meminfo(&b->sysinfo);
+ limit = b->sysinfo.totalram;
+
+ /* Ensure limit fits in 32-bits */
+ limit32 = (u32)limit;
+ if (limit != limit32)
+ return false;
+
+ /* update stats */
+ STATS_INC(b->stats.target);
+
+ status = VMWARE_BALLOON_CMD(GET_TARGET, limit, target);
+ if (vmballoon_check_status(b, status)) {
+ *new_target = target;
+ return true;
+ }
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.target_fail);
+ return false;
+}
+
+/*
+ * Notify the host about allocated page so that host can use it without
+ * fear that guest will need it. Host may reject some pages, we need to
+ * check the return value and maybe submit a different page.
+ */
+static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn)
+{
+ unsigned long status, dummy;
+ u32 pfn32;
+
+ pfn32 = (u32)pfn;
+ if (pfn32 != pfn)
+ return false;
+
+ STATS_INC(b->stats.lock);
+
+ status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy);
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+ STATS_INC(b->stats.lock_fail);
+ return false;
+}
+
+/*
+ * Notify the host that guest intends to release given page back into
+ * the pool of available (to the guest) pages.
+ */
+static bool vmballoon_send_unlock_page(struct vmballoon *b, unsigned long pfn)
+{
+ unsigned long status, dummy;
+ u32 pfn32;
+
+ pfn32 = (u32)pfn;
+ if (pfn32 != pfn)
+ return false;
+
+ STATS_INC(b->stats.unlock);
+
+ status = VMWARE_BALLOON_CMD(UNLOCK, pfn, dummy);
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+ STATS_INC(b->stats.unlock_fail);
+ return false;
+}
+
+/*
+ * Quickly release all pages allocated for the balloon. This function is
+ * called when host decides to "reset" balloon for one reason or another.
+ * Unlike normal "deflate" we do not (shall not) notify host of the pages
+ * being released.
+ */
+static void vmballoon_pop(struct vmballoon *b)
+{
+ struct page *page, *next;
+ unsigned int count = 0;
+
+ list_for_each_entry_safe(page, next, &b->pages, lru) {
+ list_del(&page->lru);
+ __free_page(page);
+ STATS_INC(b->stats.free);
+ b->size--;
+
+ if (++count >= b->rate_free) {
+ count = 0;
+ cond_resched();
+ }
+ }
+}
+
+/*
+ * Perform standard reset sequence by popping the balloon (in case it
+ * is not empty) and then restarting protocol. This operation normally
+ * happens when host responds with VMW_BALLOON_ERROR_RESET to a command.
+ */
+static void vmballoon_reset(struct vmballoon *b)
+{
+ /* free all pages, skipping monitor unlock */
+ vmballoon_pop(b);
+
+ if (vmballoon_send_start(b)) {
+ b->reset_required = false;
+ if (!vmballoon_send_guest_id(b))
+ pr_err("failed to send guest ID to the host\n");
+ }
+}
+
+/*
+ * Allocate (or reserve) a page for the balloon and notify the host. If host
+ * refuses the page put it on "refuse" list and allocate another one until host
+ * is satisfied. "Refused" pages are released at the end of inflation cycle
+ * (when we allocate b->rate_alloc pages).
+ */
+static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep)
+{
+ struct page *page;
+ gfp_t flags;
+ bool locked = false;
+
+ do {
+ if (!can_sleep)
+ STATS_INC(b->stats.alloc);
+ else
+ STATS_INC(b->stats.sleep_alloc);
+
+ flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
+ page = alloc_page(flags);
+ if (!page) {
+ if (!can_sleep)
+ STATS_INC(b->stats.alloc_fail);
+ else
+ STATS_INC(b->stats.sleep_alloc_fail);
+ return -ENOMEM;
+ }
+
+ /* inform monitor */
+ locked = vmballoon_send_lock_page(b, page_to_pfn(page));
+ if (!locked) {
+ if (b->reset_required) {
+ __free_page(page);
+ return -EIO;
+ }
+
+ /* place on list of non-balloonable pages, retry allocation */
+ list_add(&page->lru, &b->refused_pages);
+ STATS_INC(b->stats.refused_alloc);
+ }
+ } while (!locked);
+
+ /* track allocated page */
+ list_add(&page->lru, &b->pages);
+
+ /* update balloon size */
+ b->size++;
+
+ return 0;
+}
+
+/*
+ * Release the page allocated for the balloon. Note that we first notify
+ * the host so it can make sure the page will be available for the guest
+ * to use, if needed.
+ */
+static int vmballoon_release_page(struct vmballoon *b, struct page *page)
+{
+ if (!vmballoon_send_unlock_page(b, page_to_pfn(page)))
+ return -EIO;
+
+ list_del(&page->lru);
+
+ /* deallocate page */
+ __free_page(page);
+ STATS_INC(b->stats.free);
+
+ /* update balloon size */
+ b->size--;
+
+ return 0;
+}
+
+/*
+ * Release pages that were allocated while attempting to inflate the
+ * balloon but were refused by the host for one reason or another.
+ */
+static void vmballoon_release_refused_pages(struct vmballoon *b)
+{
+ struct page *page, *next;
+
+ list_for_each_entry_safe(page, next, &b->refused_pages, lru) {
+ list_del(&page->lru);
+ __free_page(page);
+ STATS_INC(b->stats.refused_free);
+ }
+}
+
+/*
+ * Inflate the balloon towards its target size. Note that we try to limit
+ * the rate of allocation to make sure we are not choking the rest of the
+ * system.
+ */
+static void vmballoon_inflate(struct vmballoon *b)
+{
+ unsigned int goal;
+ unsigned int rate;
+ unsigned int i;
+ unsigned int allocations = 0;
+ int error = 0;
+ bool alloc_can_sleep = false;
+
+ pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+ /*
+ * First try NOSLEEP page allocations to inflate balloon.
+ *
+ * If we do not throttle nosleep allocations, we can drain all
+ * free pages in the guest quickly (if the balloon target is high).
+ * As a side-effect, draining free pages helps to inform (force)
+ * the guest to start swapping if balloon target is not met yet,
+ * which is a desired behavior. However, balloon driver can consume
+ * all available CPU cycles if too many pages are allocated in a
+ * second. Therefore, we throttle nosleep allocations even when
+ * the guest is not under memory pressure. OTOH, if we have already
+ * predicted that the guest is under memory pressure, then we
+ * slowdown page allocations considerably.
+ */
+
+ goal = b->target - b->size;
+ /*
+ * Start with no sleep allocation rate which may be higher
+ * than sleeping allocation rate.
+ */
+ rate = b->slow_allocation_cycles ?
+ b->rate_alloc : VMW_BALLOON_NOSLEEP_ALLOC_MAX;
+
+ pr_debug("%s - goal: %d, no-sleep rate: %d, sleep rate: %d\n",
+ __func__, goal, rate, b->rate_alloc);
+
+ for (i = 0; i < goal; i++) {
+
+ error = vmballoon_reserve_page(b, alloc_can_sleep);
+ if (error) {
+ if (error != -ENOMEM) {
+ /*
+ * Not a page allocation failure, stop this
+ * cycle. Maybe we'll get new target from
+ * the host soon.
+ */
+ break;
+ }
+
+ if (alloc_can_sleep) {
+ /*
+ * CANSLEEP page allocation failed, so guest
+ * is under severe memory pressure. Quickly
+ * decrease allocation rate.
+ */
+ b->rate_alloc = max(b->rate_alloc / 2,
+ VMW_BALLOON_RATE_ALLOC_MIN);
+ break;
+ }
+
+ /*
+ * NOSLEEP page allocation failed, so the guest is
+ * under memory pressure. Let us slow down page
+ * allocations for next few cycles so that the guest
+ * gets out of memory pressure. Also, if we already
+ * allocated b->rate_alloc pages, let's pause,
+ * otherwise switch to sleeping allocations.
+ */
+ b->slow_allocation_cycles = VMW_BALLOON_SLOW_CYCLES;
+
+ if (i >= b->rate_alloc)
+ break;
+
+ alloc_can_sleep = true;
+ /* Lower rate for sleeping allocations. */
+ rate = b->rate_alloc;
+ }
+
+ if (++allocations > VMW_BALLOON_YIELD_THRESHOLD) {
+ cond_resched();
+ allocations = 0;
+ }
+
+ if (i >= rate) {
+ /* We allocated enough pages, let's take a break. */
+ break;
+ }
+ }
+
+ /*
+ * We reached our goal without failures so try increasing
+ * allocation rate.
+ */
+ if (error == 0 && i >= b->rate_alloc) {
+ unsigned int mult = i / b->rate_alloc;
+
+ b->rate_alloc =
+ min(b->rate_alloc + mult * VMW_BALLOON_RATE_ALLOC_INC,
+ VMW_BALLOON_RATE_ALLOC_MAX);
+ }
+
+ vmballoon_release_refused_pages(b);
+}
+
+/*
+ * Decrease the size of the balloon allowing guest to use more memory.
+ */
+static void vmballoon_deflate(struct vmballoon *b)
+{
+ struct page *page, *next;
+ unsigned int i = 0;
+ unsigned int goal;
+ int error;
+
+ pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+ /* limit deallocation rate */
+ goal = min(b->size - b->target, b->rate_free);
+
+ pr_debug("%s - goal: %d, rate: %d\n", __func__, goal, b->rate_free);
+
+ /* free pages to reach target */
+ list_for_each_entry_safe(page, next, &b->pages, lru) {
+ error = vmballoon_release_page(b, page);
+ if (error) {
+ /* quickly decrease rate in case of error */
+ b->rate_free = max(b->rate_free / 2,
+ VMW_BALLOON_RATE_FREE_MIN);
+ return;
+ }
+
+ if (++i >= goal)
+ break;
+ }
+
+ /* slowly increase rate if there were no errors */
+ b->rate_free = min(b->rate_free + VMW_BALLOON_RATE_FREE_INC,
+ VMW_BALLOON_RATE_FREE_MAX);
+}
+
+/*
+ * Balloon work function: reset protocol, if needed, get the new size and
+ * adjust balloon as needed. Repeat in 1 sec.
+ */
+static void vmballoon_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct vmballoon *b = container_of(dwork, struct vmballoon, dwork);
+ unsigned int target;
+
+ STATS_INC(b->stats.timer);
+
+ if (b->reset_required)
+ vmballoon_reset(b);
+
+ if (b->slow_allocation_cycles > 0)
+ b->slow_allocation_cycles--;
+
+ if (vmballoon_send_get_target(b, &target)) {
+ /* update target, adjust size */
+ b->target = target;
+
+ if (b->size < target)
+ vmballoon_inflate(b);
+ else if (b->size > target)
+ vmballoon_deflate(b);
+ }
+
+ queue_delayed_work(vmballoon_wq, dwork, round_jiffies_relative(HZ));
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+static int vmballoon_debug_show(struct seq_file *f, void *offset)
+{
+ struct vmballoon *b = f->private;
+ struct vmballoon_stats *stats = &b->stats;
+
+ /* format size info */
+ seq_printf(f,
+ "target: %8d pages\n"
+ "current: %8d pages\n",
+ b->target, b->size);
+
+ /* format rate info */
+ seq_printf(f,
+ "rateNoSleepAlloc: %8d pages/sec\n"
+ "rateSleepAlloc: %8d pages/sec\n"
+ "rateFree: %8d pages/sec\n",
+ VMW_BALLOON_NOSLEEP_ALLOC_MAX,
+ b->rate_alloc, b->rate_free);
+
+ seq_printf(f,
+ "\n"
+ "timer: %8u\n"
+ "start: %8u (%4u failed)\n"
+ "guestType: %8u (%4u failed)\n"
+ "lock: %8u (%4u failed)\n"
+ "unlock: %8u (%4u failed)\n"
+ "target: %8u (%4u failed)\n"
+ "primNoSleepAlloc: %8u (%4u failed)\n"
+ "primCanSleepAlloc: %8u (%4u failed)\n"
+ "primFree: %8u\n"
+ "errAlloc: %8u\n"
+ "errFree: %8u\n",
+ stats->timer,
+ stats->start, stats->start_fail,
+ stats->guest_type, stats->guest_type_fail,
+ stats->lock, stats->lock_fail,
+ stats->unlock, stats->unlock_fail,
+ stats->target, stats->target_fail,
+ stats->alloc, stats->alloc_fail,
+ stats->sleep_alloc, stats->sleep_alloc_fail,
+ stats->free,
+ stats->refused_alloc, stats->refused_free);
+
+ return 0;
+}
+
+static int vmballoon_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, vmballoon_debug_show, inode->i_private);
+}
+
+static const struct file_operations vmballoon_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = vmballoon_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init vmballoon_debugfs_init(struct vmballoon *b)
+{
+ int error;
+
+ b->dbg_entry = debugfs_create_file("vmmemctl", S_IRUGO, NULL, b,
+ &vmballoon_debug_fops);
+ if (IS_ERR(b->dbg_entry)) {
+ error = PTR_ERR(b->dbg_entry);
+ pr_err("failed to create debugfs entry, error: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void __exit vmballoon_debugfs_exit(struct vmballoon *b)
+{
+ debugfs_remove(b->dbg_entry);
+}
+
+#else
+
+static inline int vmballoon_debugfs_init(struct vmballoon *b)
+{
+ return 0;
+}
+
+static inline void vmballoon_debugfs_exit(struct vmballoon *b)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __init vmballoon_init(void)
+{
+ int error;
+
+ /*
+ * Check if we are running on VMware's hypervisor and bail out
+ * if we are not.
+ */
+ if (!vmware_platform())
+ return -ENODEV;
+
+ vmballoon_wq = create_freezeable_workqueue("vmmemctl");
+ if (!vmballoon_wq) {
+ pr_err("failed to create workqueue\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&balloon.pages);
+ INIT_LIST_HEAD(&balloon.refused_pages);
+
+ /* initialize rates */
+ balloon.rate_alloc = VMW_BALLOON_RATE_ALLOC_MAX;
+ balloon.rate_free = VMW_BALLOON_RATE_FREE_MAX;
+
+ INIT_DELAYED_WORK(&balloon.dwork, vmballoon_work);
+
+ /*
+ * Start balloon.
+ */
+ if (!vmballoon_send_start(&balloon)) {
+ pr_err("failed to send start command to the host\n");
+ error = -EIO;
+ goto fail;
+ }
+
+ if (!vmballoon_send_guest_id(&balloon)) {
+ pr_err("failed to send guest ID to the host\n");
+ error = -EIO;
+ goto fail;
+ }
+
+ error = vmballoon_debugfs_init(&balloon);
+ if (error)
+ goto fail;
+
+ queue_delayed_work(vmballoon_wq, &balloon.dwork, 0);
+
+ return 0;
+
+fail:
+ destroy_workqueue(vmballoon_wq);
+ return error;
+}
+module_init(vmballoon_init);
+
+static void __exit vmballoon_exit(void)
+{
+ cancel_delayed_work_sync(&balloon.dwork);
+ destroy_workqueue(vmballoon_wq);
+
+ vmballoon_debugfs_exit(&balloon);
+
+ /*
+ * Deallocate all reserved memory, and reset connection with monitor.
+ * Reset connection before deallocating memory to avoid potential for
+ * additional spurious resets from guest touching deallocated pages.
+ */
+ vmballoon_send_start(&balloon);
+ vmballoon_pop(&balloon);
+}
+module_exit(vmballoon_exit);
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 82d1e4d..4521b1e 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -4,7 +4,7 @@
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
-mtd-y := mtdcore.o mtdsuper.o mtdbdi.o
+mtd-y := mtdcore.o mtdsuper.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
diff --git a/drivers/mtd/internal.h b/drivers/mtd/internal.h
index c658fe7..e69de29 100644
--- a/drivers/mtd/internal.h
+++ b/drivers/mtd/internal.h
@@ -1,17 +0,0 @@
-/* Internal MTD definitions
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * mtdbdi.c
- */
-extern struct backing_dev_info mtd_bdi_unmappable;
-extern struct backing_dev_info mtd_bdi_ro_mappable;
-extern struct backing_dev_info mtd_bdi_rw_mappable;
diff --git a/drivers/mtd/mtdbdi.c b/drivers/mtd/mtdbdi.c
index 5ca5aed..e69de29 100644
--- a/drivers/mtd/mtdbdi.c
+++ b/drivers/mtd/mtdbdi.c
@@ -1,43 +0,0 @@
-/* MTD backing device capabilities
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/backing-dev.h>
-#include <linux/mtd/mtd.h>
-#include "internal.h"
-
-/*
- * backing device capabilities for non-mappable devices (such as NAND flash)
- * - permits private mappings, copies are taken of the data
- */
-struct backing_dev_info mtd_bdi_unmappable = {
- .capabilities = BDI_CAP_MAP_COPY,
-};
-
-/*
- * backing device capabilities for R/O mappable devices (such as ROM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_ro_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
-};
-
-/*
- * backing device capabilities for writable mappable devices (such as RAM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_rw_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
- BDI_CAP_WRITE_MAP),
-};
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 5b38b17..b177e75 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,6 +2,9 @@
* Core registration and callback routines for MTD
* drivers and users.
*
+ * bdi bits are:
+ * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
*/
#include <linux/module.h>
@@ -16,11 +19,39 @@
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
#include <linux/proc_fs.h>
+#include <linux/backing-dev.h>
#include <linux/mtd/mtd.h>
-#include "internal.h"
#include "mtdcore.h"
+/*
+ * backing device capabilities for non-mappable devices (such as NAND flash)
+ * - permits private mappings, copies are taken of the data
+ */
+struct backing_dev_info mtd_bdi_unmappable = {
+ .capabilities = BDI_CAP_MAP_COPY,
+};
+
+/*
+ * backing device capabilities for R/O mappable devices (such as ROM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_ro_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
+};
+
+/*
+ * backing device capabilities for writable mappable devices (such as RAM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_rw_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
+ BDI_CAP_WRITE_MAP),
+};
static int mtd_cls_suspend(struct device *dev, pm_message_t state);
static int mtd_cls_resume(struct device *dev);
@@ -628,20 +659,55 @@
/*====================================================================*/
/* Init code */
+static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
+{
+ int ret;
+
+ ret = bdi_init(bdi);
+ if (!ret)
+ ret = bdi_register(bdi, NULL, name);
+
+ if (ret)
+ bdi_destroy(bdi);
+
+ return ret;
+}
+
static int __init init_mtd(void)
{
int ret;
- ret = class_register(&mtd_class);
- if (ret) {
- pr_err("Error registering mtd class: %d\n", ret);
- return ret;
- }
+ ret = class_register(&mtd_class);
+ if (ret)
+ goto err_reg;
+
+ ret = mtd_bdi_init(&mtd_bdi_unmappable, "mtd-unmap");
+ if (ret)
+ goto err_bdi1;
+
+ ret = mtd_bdi_init(&mtd_bdi_ro_mappable, "mtd-romap");
+ if (ret)
+ goto err_bdi2;
+
+ ret = mtd_bdi_init(&mtd_bdi_rw_mappable, "mtd-rwmap");
+ if (ret)
+ goto err_bdi3;
+
#ifdef CONFIG_PROC_FS
if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
proc_mtd->read_proc = mtd_read_proc;
#endif /* CONFIG_PROC_FS */
return 0;
+
+err_bdi3:
+ bdi_destroy(&mtd_bdi_ro_mappable);
+err_bdi2:
+ bdi_destroy(&mtd_bdi_unmappable);
+err_bdi1:
+ class_unregister(&mtd_class);
+err_reg:
+ pr_err("Error registering mtd class or bdi: %d\n", ret);
+ return ret;
}
static void __exit cleanup_mtd(void)
@@ -651,6 +717,9 @@
remove_proc_entry( "mtd", NULL);
#endif /* CONFIG_PROC_FS */
class_unregister(&mtd_class);
+ bdi_destroy(&mtd_bdi_unmappable);
+ bdi_destroy(&mtd_bdi_ro_mappable);
+ bdi_destroy(&mtd_bdi_rw_mappable);
}
module_init(init_mtd);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index af8b42e..7c00319 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -13,6 +13,7 @@
#include <linux/mtd/super.h>
#include <linux/namei.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
/*
* compare superblocks to see if they're equivalent
@@ -44,6 +45,7 @@
sb->s_mtd = mtd;
sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
+ sb->s_bdi = mtd->backing_dev_info;
return 0;
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index f59c074..d60fc57 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -60,7 +60,13 @@
}
buf64 = (uint64_t *)buf;
while (i < len/8) {
- uint64_t x;
+ /*
+ * Since GCC has no proper constraint (PR 43518)
+ * force x variable to r2/r3 registers as ldrd instruction
+ * requires first register to be even.
+ */
+ register uint64_t x asm ("r2");
+
asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index a872aea..f443d43 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -88,6 +88,7 @@
static int __init octeon_mdiobus_probe(struct platform_device *pdev)
{
struct octeon_mdiobus *bus;
+ union cvmx_smix_en smi_en;
int i;
int err = -ENOENT;
@@ -103,6 +104,10 @@
if (!bus->mii_bus)
goto err;
+ smi_en.u64 = 0;
+ smi_en.s.en = 1;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+
/*
* Standard Octeon evaluation boards don't support phy
* interrupts, we need to poll.
@@ -133,17 +138,22 @@
err:
devm_kfree(&pdev->dev, bus);
+ smi_en.u64 = 0;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
return err;
}
static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
{
struct octeon_mdiobus *bus;
+ union cvmx_smix_en smi_en;
bus = dev_get_drvdata(&pdev->dev);
mdiobus_unregister(bus->mii_bus);
mdiobus_free(bus->mii_bus);
+ smi_en.u64 = 0;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
return 0;
}
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 18ecae4..b474833 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -69,7 +69,7 @@
}
phy = get_phy_device(mdio, be32_to_cpup(addr));
- if (!phy) {
+ if (!phy || IS_ERR(phy)) {
dev_err(&mdio->dev, "error probing PHY at address %i\n",
*addr);
continue;
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 4e3e038..0830347 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/string.h>
+#include <linux/vmalloc.h>
#include <asm/pci-bridge.h>
#include <linux/mutex.h>
@@ -430,6 +431,8 @@
rc = dlpar_remove_pci_slot(drc_name, dn);
break;
}
+ vm_unmap_aliases();
+
printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name);
exit:
mutex_unlock(&rpadlpar_mutex);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 7197022..ef7411c 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -29,6 +29,7 @@
#include <linux/pci_hotplug.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/vmalloc.h>
#include <asm/eeh.h> /* for eeh_add_device() */
#include <asm/rtas.h> /* rtas_call */
#include <asm/pci-bridge.h> /* for pci_controller */
@@ -418,6 +419,8 @@
return -EINVAL;
pcibios_remove_pci_devices(slot->bus);
+ vm_unmap_aliases();
+
slot->state = NOT_CONFIGURED;
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5ea587e..37499127 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -679,7 +679,7 @@
*/
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
{
- return state > PCI_D0 ?
+ return state >= PCI_D0 ?
pci_platform_power_transition(dev, state) : -EINVAL;
}
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
@@ -716,10 +716,6 @@
*/
return 0;
- /* Check if we're already there */
- if (dev->current_state == state)
- return 0;
-
__pci_start_power_transition(dev, state);
/* This device is quirked not to be put into D3, so
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index aa495ad..7a711ee 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -244,11 +244,17 @@
/* Assert Secondary Bus Reset */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
- p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
+ p2p_ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+ /*
+ * we should send hot reset message for 2ms to allow it time to
+ * propogate to all downstream ports
+ */
+ msleep(2);
+
/* De-assert Secondary Bus Reset */
- p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
+ p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
/*
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 882bd8d..c82548a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -174,19 +174,14 @@
pci_read_config_dword(dev, pos, &sz);
pci_write_config_dword(dev, pos, l);
- if (!sz)
- goto fail; /* BAR not implemented */
-
/*
* All bits set in sz means the device isn't working properly.
- * If it's a memory BAR or a ROM, bit 0 must be clear; if it's
- * an io BAR, bit 1 must be clear.
+ * If the BAR isn't implemented, all bits must be 0. If it's a
+ * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
+ * 1 must be clear.
*/
- if (sz == 0xffffffff) {
- dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n",
- pos, sz);
+ if (!sz || sz == 0xffffffff)
goto fail;
- }
/*
* I don't know how l can have all bits set. Copied from old code.
@@ -249,17 +244,13 @@
pos, res);
}
} else {
- u32 size = pci_size(l, sz, mask);
+ sz = pci_size(l, sz, mask);
- if (!size) {
- dev_err(&dev->dev, "reg %x: invalid size "
- "(l %#x sz %#x mask %#x); broken device?",
- pos, l, sz, mask);
+ if (!sz)
goto fail;
- }
res->start = l;
- res->end = l + size;
+ res->end = l + sz;
dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
}
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 2d48196..0f4cc3f 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -146,7 +146,6 @@
static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
{
int ret;
- unsigned long flags;
if (sock->stschg_irq != -1) {
ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
@@ -162,30 +161,23 @@
* active one disabled.
*/
if (sock->board_type == BOARD_TYPE_DB1200) {
- local_irq_save(flags);
-
ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_insert", sock);
- if (ret) {
- local_irq_restore(flags);
+ if (ret)
goto out1;
- }
ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_eject", sock);
if (ret) {
free_irq(sock->insert_irq, sock);
- local_irq_restore(flags);
goto out1;
}
- /* disable the currently active one */
+ /* enable the currently silent one */
if (db1200_card_inserted(sock))
- disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
else
- disable_irq_nosync(sock->eject_irq);
-
- local_irq_restore(flags);
+ enable_irq(sock->insert_irq);
} else {
/* all other (older) Db1x00 boards use a GPIO to show
* card detection status: use both-edge triggers.
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 4014cf8..508f94a 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -335,7 +335,6 @@
mutex_lock(&s->ops_mutex);
list_del(&p_dev->socket_device_list);
- p_dev->_removed = 1;
mutex_unlock(&s->ops_mutex);
dev_dbg(&p_dev->dev, "unregistering device\n");
@@ -654,14 +653,7 @@
static void pcmcia_requery(struct pcmcia_socket *s)
{
- int present, has_pfc;
-
- mutex_lock(&s->ops_mutex);
- present = s->pcmcia_state.present;
- mutex_unlock(&s->ops_mutex);
-
- if (!present)
- return;
+ int has_pfc;
if (s->functions == 0) {
pcmcia_card_add(s);
@@ -828,11 +820,12 @@
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
- if (dev->device_no != did->device_no)
- return 0;
+ dev_dbg(&dev->dev, "this is a pseudo-multi-function device\n");
mutex_lock(&dev->socket->ops_mutex);
dev->socket->pcmcia_state.has_pfc = 1;
mutex_unlock(&dev->socket->ops_mutex);
+ if (dev->device_no != did->device_no)
+ return 0;
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_FUNC_ID) {
@@ -843,7 +836,7 @@
/* if this is a pseudo-multi-function device,
* we need explicit matches */
- if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO)
+ if (dev->socket->pcmcia_state.has_pfc)
return 0;
if (dev->device_no)
return 0;
@@ -1260,9 +1253,7 @@
switch (event) {
case CS_EVENT_CARD_REMOVAL:
- mutex_lock(&s->ops_mutex);
- s->pcmcia_state.present = 0;
- mutex_unlock(&s->ops_mutex);
+ atomic_set(&skt->present, 0);
pcmcia_card_remove(skt, NULL);
handle_event(skt, event);
mutex_lock(&s->ops_mutex);
@@ -1271,9 +1262,9 @@
break;
case CS_EVENT_CARD_INSERTION:
+ atomic_set(&skt->present, 1);
mutex_lock(&s->ops_mutex);
s->pcmcia_state.has_pfc = 0;
- s->pcmcia_state.present = 1;
destroy_cis_cache(s); /* to be on the safe side... */
mutex_unlock(&s->ops_mutex);
pcmcia_card_add(skt);
@@ -1313,7 +1304,13 @@
return 0;
} /* ds_event */
-
+/*
+ * NOTE: This is racy. There's no guarantee the card will still be
+ * physically present, even if the call to this function returns
+ * non-NULL. Furthermore, the device driver most likely is unbound
+ * almost immediately, so the timeframe where pcmcia_dev_present
+ * returns NULL is probably really really small.
+ */
struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *_p_dev)
{
struct pcmcia_device *p_dev;
@@ -1323,22 +1320,9 @@
if (!p_dev)
return NULL;
- mutex_lock(&p_dev->socket->ops_mutex);
- if (!p_dev->socket->pcmcia_state.present)
- goto out;
+ if (atomic_read(&p_dev->socket->present) != 0)
+ ret = p_dev;
- if (p_dev->socket->pcmcia_state.dead)
- goto out;
-
- if (p_dev->_removed)
- goto out;
-
- if (p_dev->suspended)
- goto out;
-
- ret = p_dev;
- out:
- mutex_unlock(&p_dev->socket->ops_mutex);
pcmcia_put_dev(p_dev);
return ret;
}
@@ -1388,6 +1372,8 @@
return ret;
}
+ atomic_set(&socket->present, 0);
+
return 0;
}
@@ -1399,10 +1385,6 @@
if (!socket)
return;
- mutex_lock(&socket->ops_mutex);
- socket->pcmcia_state.dead = 1;
- mutex_unlock(&socket->ops_mutex);
-
pccard_register_pcmcia(socket, NULL);
/* unregister any unbound devices */
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7bec458..6c3320d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -390,6 +390,7 @@
depends on ACPI_WMI
depends on INPUT
depends on EXPERIMENTAL
+ select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on Eee PC laptops.
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 52262b0..efe8f63 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -79,15 +79,15 @@
module_param(wapf, uint, 0644);
MODULE_PARM_DESC(wapf, "WAPF value");
-static uint wlan_status = 1;
-static uint bluetooth_status = 1;
+static int wlan_status = 1;
+static int bluetooth_status = 1;
-module_param(wlan_status, uint, 0644);
+module_param(wlan_status, int, 0644);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
-module_param(bluetooth_status, uint, 0644);
+module_param(bluetooth_status, int, 0644);
MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 6ba6c30..66f53c3 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -217,6 +217,7 @@
if (dell_new_hk_type && (buffer_entry[1] != 0x10)) {
printk(KERN_INFO "dell-wmi: Received unknown WMI event"
" (0x%x)\n", buffer_entry[1]);
+ kfree(obj);
return;
}
@@ -234,7 +235,7 @@
key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) {
/* Don't report brightness notifications that will also
* come via ACPI */
- return;
+ ;
} else {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 54a0157..0306174 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -169,7 +169,6 @@
struct backlight_device *backlight_device;
struct input_dev *inputdev;
- struct key_entry *keymap;
struct rfkill *wlan_rfkill;
struct rfkill *bluetooth_rfkill;
@@ -1204,8 +1203,8 @@
static void eeepc_input_exit(struct eeepc_laptop *eeepc)
{
if (eeepc->inputdev) {
+ sparse_keymap_free(eeepc->inputdev);
input_unregister_device(eeepc->inputdev);
- kfree(eeepc->keymap);
}
}
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 9f88226..b227eb4 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -23,6 +23,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -30,22 +32,34 @@
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define EEEPC_WMI_FILE "eeepc-wmi"
+
MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>");
MODULE_DESCRIPTION("Eee PC WMI Hotkey Driver");
MODULE_LICENSE("GPL");
#define EEEPC_WMI_EVENT_GUID "ABBC0F72-8EA1-11D1-00A0-C90629100000"
+#define EEEPC_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66"
MODULE_ALIAS("wmi:"EEEPC_WMI_EVENT_GUID);
+MODULE_ALIAS("wmi:"EEEPC_WMI_MGMT_GUID);
#define NOTIFY_BRNUP_MIN 0x11
#define NOTIFY_BRNUP_MAX 0x1f
#define NOTIFY_BRNDOWN_MIN 0x20
#define NOTIFY_BRNDOWN_MAX 0x2e
+#define EEEPC_WMI_METHODID_DEVS 0x53564544
+#define EEEPC_WMI_METHODID_DSTS 0x53544344
+
+#define EEEPC_WMI_DEVID_BACKLIGHT 0x00050012
+
static const struct key_entry eeepc_wmi_keymap[] = {
/* Sleep already handled via generic ACPI code */
{ KE_KEY, 0x5d, { KEY_WLAN } },
@@ -58,18 +72,198 @@
{ KE_END, 0},
};
-static struct input_dev *eeepc_wmi_input_dev;
+struct bios_args {
+ u32 dev_id;
+ u32 ctrl_param;
+};
+
+struct eeepc_wmi {
+ struct input_dev *inputdev;
+ struct backlight_device *backlight_device;
+};
+
+static struct platform_device *platform_device;
+
+static int eeepc_wmi_input_init(struct eeepc_wmi *eeepc)
+{
+ int err;
+
+ eeepc->inputdev = input_allocate_device();
+ if (!eeepc->inputdev)
+ return -ENOMEM;
+
+ eeepc->inputdev->name = "Eee PC WMI hotkeys";
+ eeepc->inputdev->phys = EEEPC_WMI_FILE "/input0";
+ eeepc->inputdev->id.bustype = BUS_HOST;
+ eeepc->inputdev->dev.parent = &platform_device->dev;
+
+ err = sparse_keymap_setup(eeepc->inputdev, eeepc_wmi_keymap, NULL);
+ if (err)
+ goto err_free_dev;
+
+ err = input_register_device(eeepc->inputdev);
+ if (err)
+ goto err_free_keymap;
+
+ return 0;
+
+err_free_keymap:
+ sparse_keymap_free(eeepc->inputdev);
+err_free_dev:
+ input_free_device(eeepc->inputdev);
+ return err;
+}
+
+static void eeepc_wmi_input_exit(struct eeepc_wmi *eeepc)
+{
+ if (eeepc->inputdev) {
+ sparse_keymap_free(eeepc->inputdev);
+ input_unregister_device(eeepc->inputdev);
+ }
+
+ eeepc->inputdev = NULL;
+}
+
+static acpi_status eeepc_wmi_get_devstate(u32 dev_id, u32 *ctrl_param)
+{
+ struct acpi_buffer input = { (acpi_size)sizeof(u32), &dev_id };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ u32 tmp;
+
+ status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID,
+ 1, EEEPC_WMI_METHODID_DSTS, &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = (union acpi_object *)output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = (u32)obj->integer.value;
+ else
+ tmp = 0;
+
+ if (ctrl_param)
+ *ctrl_param = tmp;
+
+ kfree(obj);
+
+ return status;
+
+}
+
+static acpi_status eeepc_wmi_set_devstate(u32 dev_id, u32 ctrl_param)
+{
+ struct bios_args args = {
+ .dev_id = dev_id,
+ .ctrl_param = ctrl_param,
+ };
+ struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
+ acpi_status status;
+
+ status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID,
+ 1, EEEPC_WMI_METHODID_DEVS, &input, NULL);
+
+ return status;
+}
+
+static int read_brightness(struct backlight_device *bd)
+{
+ static u32 ctrl_param;
+ acpi_status status;
+
+ status = eeepc_wmi_get_devstate(EEEPC_WMI_DEVID_BACKLIGHT, &ctrl_param);
+
+ if (ACPI_FAILURE(status))
+ return -1;
+ else
+ return ctrl_param & 0xFF;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+
+ static u32 ctrl_param;
+ acpi_status status;
+
+ ctrl_param = bd->props.brightness;
+
+ status = eeepc_wmi_set_devstate(EEEPC_WMI_DEVID_BACKLIGHT, ctrl_param);
+
+ if (ACPI_FAILURE(status))
+ return -1;
+ else
+ return 0;
+}
+
+static const struct backlight_ops eeepc_wmi_bl_ops = {
+ .get_brightness = read_brightness,
+ .update_status = update_bl_status,
+};
+
+static int eeepc_wmi_backlight_notify(struct eeepc_wmi *eeepc, int code)
+{
+ struct backlight_device *bd = eeepc->backlight_device;
+ int old = bd->props.brightness;
+ int new;
+
+ if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
+ new = code - NOTIFY_BRNUP_MIN + 1;
+ else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
+ new = code - NOTIFY_BRNDOWN_MIN;
+
+ bd->props.brightness = new;
+ backlight_update_status(bd);
+ backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
+
+ return old;
+}
+
+static int eeepc_wmi_backlight_init(struct eeepc_wmi *eeepc)
+{
+ struct backlight_device *bd;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 15;
+ bd = backlight_device_register(EEEPC_WMI_FILE,
+ &platform_device->dev, eeepc,
+ &eeepc_wmi_bl_ops, &props);
+ if (IS_ERR(bd)) {
+ pr_err("Could not register backlight device\n");
+ return PTR_ERR(bd);
+ }
+
+ eeepc->backlight_device = bd;
+
+ bd->props.brightness = read_brightness(bd);
+ bd->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(bd);
+
+ return 0;
+}
+
+static void eeepc_wmi_backlight_exit(struct eeepc_wmi *eeepc)
+{
+ if (eeepc->backlight_device)
+ backlight_device_unregister(eeepc->backlight_device);
+
+ eeepc->backlight_device = NULL;
+}
static void eeepc_wmi_notify(u32 value, void *context)
{
+ struct eeepc_wmi *eeepc = context;
struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
acpi_status status;
int code;
+ int orig_code;
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
- pr_err("EEEPC WMI: bad event status 0x%x\n", status);
+ pr_err("bad event status 0x%x\n", status);
return;
}
@@ -77,81 +271,142 @@
if (obj && obj->type == ACPI_TYPE_INTEGER) {
code = obj->integer.value;
+ orig_code = code;
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = NOTIFY_BRNUP_MIN;
- else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
+ else if (code >= NOTIFY_BRNDOWN_MIN &&
+ code <= NOTIFY_BRNDOWN_MAX)
code = NOTIFY_BRNDOWN_MIN;
- if (!sparse_keymap_report_event(eeepc_wmi_input_dev,
+ if (code == NOTIFY_BRNUP_MIN || code == NOTIFY_BRNDOWN_MIN) {
+ if (!acpi_video_backlight_support())
+ eeepc_wmi_backlight_notify(eeepc, orig_code);
+ }
+
+ if (!sparse_keymap_report_event(eeepc->inputdev,
code, 1, true))
- pr_info("EEEPC WMI: Unknown key %x pressed\n", code);
+ pr_info("Unknown key %x pressed\n", code);
}
kfree(obj);
}
-static int eeepc_wmi_input_setup(void)
+static int __devinit eeepc_wmi_platform_probe(struct platform_device *device)
{
- int err;
-
- eeepc_wmi_input_dev = input_allocate_device();
- if (!eeepc_wmi_input_dev)
- return -ENOMEM;
-
- eeepc_wmi_input_dev->name = "Eee PC WMI hotkeys";
- eeepc_wmi_input_dev->phys = "wmi/input0";
- eeepc_wmi_input_dev->id.bustype = BUS_HOST;
-
- err = sparse_keymap_setup(eeepc_wmi_input_dev, eeepc_wmi_keymap, NULL);
- if (err)
- goto err_free_dev;
-
- err = input_register_device(eeepc_wmi_input_dev);
- if (err)
- goto err_free_keymap;
-
- return 0;
-
-err_free_keymap:
- sparse_keymap_free(eeepc_wmi_input_dev);
-err_free_dev:
- input_free_device(eeepc_wmi_input_dev);
- return err;
-}
-
-static int __init eeepc_wmi_init(void)
-{
+ struct eeepc_wmi *eeepc;
int err;
acpi_status status;
- if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID)) {
- pr_warning("EEEPC WMI: No known WMI GUID found\n");
- return -ENODEV;
- }
+ eeepc = platform_get_drvdata(device);
- err = eeepc_wmi_input_setup();
+ err = eeepc_wmi_input_init(eeepc);
if (err)
- return err;
+ goto error_input;
+
+ if (!acpi_video_backlight_support()) {
+ err = eeepc_wmi_backlight_init(eeepc);
+ if (err)
+ goto error_backlight;
+ } else
+ pr_info("Backlight controlled by ACPI video driver\n");
status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID,
- eeepc_wmi_notify, NULL);
+ eeepc_wmi_notify, eeepc);
if (ACPI_FAILURE(status)) {
- sparse_keymap_free(eeepc_wmi_input_dev);
- input_unregister_device(eeepc_wmi_input_dev);
- pr_err("EEEPC WMI: Unable to register notify handler - %d\n",
+ pr_err("Unable to register notify handler - %d\n",
status);
- return -ENODEV;
+ err = -ENODEV;
+ goto error_wmi;
}
return 0;
+
+error_wmi:
+ eeepc_wmi_backlight_exit(eeepc);
+error_backlight:
+ eeepc_wmi_input_exit(eeepc);
+error_input:
+ return err;
+}
+
+static int __devexit eeepc_wmi_platform_remove(struct platform_device *device)
+{
+ struct eeepc_wmi *eeepc;
+
+ eeepc = platform_get_drvdata(device);
+ wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID);
+ eeepc_wmi_backlight_exit(eeepc);
+ eeepc_wmi_input_exit(eeepc);
+
+ return 0;
+}
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = EEEPC_WMI_FILE,
+ .owner = THIS_MODULE,
+ },
+ .probe = eeepc_wmi_platform_probe,
+ .remove = __devexit_p(eeepc_wmi_platform_remove),
+};
+
+static int __init eeepc_wmi_init(void)
+{
+ struct eeepc_wmi *eeepc;
+ int err;
+
+ if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID) ||
+ !wmi_has_guid(EEEPC_WMI_MGMT_GUID)) {
+ pr_warning("No known WMI GUID found\n");
+ return -ENODEV;
+ }
+
+ eeepc = kzalloc(sizeof(struct eeepc_wmi), GFP_KERNEL);
+ if (!eeepc)
+ return -ENOMEM;
+
+ platform_device = platform_device_alloc(EEEPC_WMI_FILE, -1);
+ if (!platform_device) {
+ pr_warning("Unable to allocate platform device\n");
+ err = -ENOMEM;
+ goto fail_platform;
+ }
+
+ err = platform_device_add(platform_device);
+ if (err) {
+ pr_warning("Unable to add platform device\n");
+ goto put_dev;
+ }
+
+ platform_set_drvdata(platform_device, eeepc);
+
+ err = platform_driver_register(&platform_driver);
+ if (err) {
+ pr_warning("Unable to register platform driver\n");
+ goto del_dev;
+ }
+
+ return 0;
+
+del_dev:
+ platform_device_del(platform_device);
+put_dev:
+ platform_device_put(platform_device);
+fail_platform:
+ kfree(eeepc);
+
+ return err;
}
static void __exit eeepc_wmi_exit(void)
{
- wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID);
- sparse_keymap_free(eeepc_wmi_input_dev);
- input_unregister_device(eeepc_wmi_input_dev);
+ struct eeepc_wmi *eeepc;
+
+ eeepc = platform_get_drvdata(platform_device);
+ platform_driver_unregister(&platform_driver);
+ platform_device_unregister(platform_device);
+ kfree(eeepc);
}
module_init(eeepc_wmi_init);
diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c
index b6218f1..552cad8 100644
--- a/drivers/regulator/max8925-regulator.c
+++ b/drivers/regulator/max8925-regulator.c
@@ -109,7 +109,7 @@
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
- ret = max8925_reg_read(info->i2c, info->vol_reg);
+ ret = max8925_reg_read(info->i2c, info->enable_reg);
if (ret < 0)
return ret;
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index a681f5e..ad036dd 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -618,9 +618,12 @@
dev_get_platdata(&pdev->dev);
int i;
+ platform_set_drvdata(pdev, NULL);
+
for (i = 0; i < pdata->num_regulators; i++)
regulator_unregister(priv->regulators[i]);
+ kfree(priv);
return 0;
}
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index bbea90ba..acf222f 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1899,7 +1899,8 @@
/* Process requests that may be recovered */
if (cqr->status == DASD_CQR_NEED_ERP) {
erp_fn = base->discipline->erp_action(cqr);
- erp_fn(cqr);
+ if (IS_ERR(erp_fn(cqr)))
+ continue;
goto restart;
}
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 6927e75..6632649 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2309,7 +2309,7 @@
cqr->retries);
dasd_block_set_timer(device->block, (HZ << 3));
}
- return cqr;
+ return erp;
}
ccw = cqr->cpaddr;
@@ -2372,6 +2372,9 @@
/* add erp and initialize with default TIC */
erp = dasd_3990_erp_add_erp(cqr);
+ if (IS_ERR(erp))
+ return erp;
+
/* inspect sense, determine specific ERP if possible */
if (erp != cqr) {
@@ -2711,6 +2714,8 @@
if (erp == NULL) {
/* no matching erp found - set up erp */
erp = dasd_3990_erp_additional_erp(cqr);
+ if (IS_ERR(erp))
+ return erp;
} else {
/* matching erp found - set all leading erp's to DONE */
erp = dasd_3990_erp_handle_match_erp(cqr, erp);
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 18daf16a..7217966 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -638,11 +638,7 @@
rc = memcpy_hsa_kernel(ipl_block, ipib_info.ipib, PAGE_SIZE);
else
rc = memcpy_real(ipl_block, (void *) ipib_info.ipib, PAGE_SIZE);
- if (rc) {
- free_page((unsigned long) ipl_block);
- return rc;
- }
- if (csum_partial(ipl_block, ipl_block->hdr.len, 0) !=
+ if (rc || csum_partial(ipl_block, ipl_block->hdr.len, 0) !=
ipib_info.checksum) {
TRACE("Checksum does not match\n");
free_page((unsigned long) ipl_block);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 4038f5b4..ce7cb87 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -29,6 +29,7 @@
#include "chsc.h"
static void *sei_page;
+static DEFINE_SPINLOCK(sda_lock);
/**
* chsc_error_from_response() - convert a chsc response to an error
@@ -832,11 +833,10 @@
kfree(sei_page);
}
-int __init
-chsc_enable_facility(int operation_code)
+int chsc_enable_facility(int operation_code)
{
int ret;
- struct {
+ static struct {
struct chsc_header request;
u8 reserved1:4;
u8 format:4;
@@ -849,33 +849,32 @@
u32 reserved5:4;
u32 format2:4;
u32 reserved6:24;
- } __attribute__ ((packed)) *sda_area;
+ } __attribute__ ((packed, aligned(4096))) sda_area;
- sda_area = (void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
- if (!sda_area)
- return -ENOMEM;
- sda_area->request.length = 0x0400;
- sda_area->request.code = 0x0031;
- sda_area->operation_code = operation_code;
+ spin_lock(&sda_lock);
+ memset(&sda_area, 0, sizeof(sda_area));
+ sda_area.request.length = 0x0400;
+ sda_area.request.code = 0x0031;
+ sda_area.operation_code = operation_code;
- ret = chsc(sda_area);
+ ret = chsc(&sda_area);
if (ret > 0) {
ret = (ret == 3) ? -ENODEV : -EBUSY;
goto out;
}
- switch (sda_area->response.code) {
+ switch (sda_area.response.code) {
case 0x0101:
ret = -EOPNOTSUPP;
break;
default:
- ret = chsc_error_from_response(sda_area->response.code);
+ ret = chsc_error_from_response(sda_area.response.code);
}
if (ret != 0)
CIO_CRW_EVENT(2, "chsc: sda (oc=%x) failed (rc=%04x)\n",
- operation_code, sda_area->response.code);
+ operation_code, sda_area.response.code);
out:
- free_page((unsigned long)sda_area);
+ spin_unlock(&sda_lock);
return ret;
}
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index 404f630..3b6f4ad 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -124,7 +124,7 @@
* since we don't have a way to clear the subchannel and
* cannot disable it with a request running.
*/
- cc = stsch(sch->schid, &schib);
+ cc = stsch_err(sch->schid, &schib);
if (!cc && scsw_stctl(&schib.scsw))
return -EAGAIN;
return 0;
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index f736cdc..5feea1a 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -361,7 +361,7 @@
struct schib schib;
int ccode, retry, ret = 0;
- if (stsch(sch->schid, &schib) || !css_sch_is_valid(&schib))
+ if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
for (retry = 0; retry < 5; retry++) {
@@ -372,7 +372,7 @@
return ccode;
switch (ccode) {
case 0: /* successful */
- if (stsch(sch->schid, &schib) ||
+ if (stsch_err(sch->schid, &schib) ||
!css_sch_is_valid(&schib))
return -ENODEV;
if (cio_check_config(sch, &schib)) {
@@ -404,7 +404,7 @@
{
struct schib schib;
- if (stsch(sch->schid, &schib) || !css_sch_is_valid(&schib))
+ if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
memcpy(&sch->schib, &schib, sizeof(schib));
@@ -771,7 +771,7 @@
if (console_irq != -1) {
/* VM provided us with the irq number of the console. */
schid.sch_no = console_irq;
- if (stsch(schid, &console_subchannel.schib) != 0 ||
+ if (stsch_err(schid, &console_subchannel.schib) != 0 ||
(console_subchannel.schib.pmcw.st != SUBCHANNEL_TYPE_IO) ||
!console_subchannel.schib.pmcw.dnv)
return -1;
@@ -863,10 +863,10 @@
cc = 0;
for (retry=0;retry<3;retry++) {
schib->pmcw.ena = 0;
- cc = msch(schid, schib);
+ cc = msch_err(schid, schib);
if (cc)
return (cc==3?-ENODEV:-EBUSY);
- if (stsch(schid, schib) || !css_sch_is_valid(schib))
+ if (stsch_err(schid, schib) || !css_sch_is_valid(schib))
return -ENODEV;
if (!schib->pmcw.ena)
return 0;
@@ -913,7 +913,7 @@
pgm_check_occured = 0;
s390_base_pgm_handler_fn = cio_reset_pgm_check_handler;
- rc = stsch(schid, addr);
+ rc = stsch_err(schid, addr);
s390_base_pgm_handler_fn = NULL;
/* The program check handler could have changed pgm_check_occured. */
@@ -950,7 +950,7 @@
/* No default clear strategy */
break;
}
- stsch(schid, &schib);
+ stsch_err(schid, &schib);
__disable_subchannel_easy(schid, &schib);
}
out:
@@ -1086,7 +1086,7 @@
schid = *(struct subchannel_id *)&S390_lowcore.subchannel_id;
if (!schid.one)
return -ENODEV;
- if (stsch(schid, &schib))
+ if (stsch_err(schid, &schib))
return -ENODEV;
if (schib.pmcw.st != SUBCHANNEL_TYPE_IO)
return -ENODEV;
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 2769da5..5116491 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -870,15 +870,10 @@
/* Try to enable MSS. */
ret = chsc_enable_facility(CHSC_SDA_OC_MSS);
- switch (ret) {
- case 0: /* Success. */
- max_ssid = __MAX_SSID;
- break;
- case -ENOMEM:
- goto out;
- default:
+ if (ret)
max_ssid = 0;
- }
+ else /* Success. */
+ max_ssid = __MAX_SSID;
ret = slow_subchannel_init();
if (ret)
@@ -1048,6 +1043,11 @@
}
subsys_initcall_sync(channel_subsystem_init_sync);
+void channel_subsystem_reinit(void)
+{
+ chsc_enable_facility(CHSC_SDA_OC_MSS);
+}
+
#ifdef CONFIG_PROC_FS
static ssize_t cio_settle_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index c56ab94..c9b8526 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -45,7 +45,7 @@
sch = to_subchannel(cdev->dev.parent);
private = to_io_private(sch);
orb = &private->orb;
- cc = stsch(sch->schid, &schib);
+ cc = stsch_err(sch->schid, &schib);
printk(KERN_WARNING "cio: ccw device timeout occurred at %llx, "
"device information:\n", get_clock());
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 1856489..b3b1d2f 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2105,7 +2105,8 @@
blktrc.inb_usage = req->qdio_req.qdio_inb_usage;
blktrc.outb_usage = req->qdio_req.qdio_outb_usage;
- if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
+ if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA &&
+ !(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
blktrc.flags |= ZFCP_BLK_LAT_VALID;
blktrc.channel_lat = lat_in->channel_lat * ticks;
blktrc.fabric_lat = lat_in->fabric_lat * ticks;
@@ -2157,9 +2158,8 @@
fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt);
- zfcp_fsf_req_trace(req, scpnt);
-
skip_fsfstatus:
+ zfcp_fsf_req_trace(req, scpnt);
zfcp_dbf_scsi_result(req->adapter->dbf, scpnt, req);
scpnt->host_scribble = NULL;
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 72617b6..e641922 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -169,6 +169,7 @@
SE_DEBUG(DBG_LVL_1,
"Failed to allocate memory for"
"mgmt_invalidate_icds \n");
+ spin_unlock(&ctrl->mbox_lock);
return -1;
}
nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 6cf9dc3..6b624e7 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -362,6 +362,7 @@
u32 num_ccell;
int ofld_conns_active;
+ wait_queue_head_t eh_wait;
int max_active_conns;
struct iscsi_cid_queue cid_que;
@@ -381,6 +382,7 @@
spinlock_t lock; /* protects hba structure access */
struct mutex net_dev_lock;/* sync net device access */
+ int hba_shutdown_tmo;
/*
* PCI related info.
*/
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 6d8172e..5d9296c 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -177,11 +177,22 @@
struct bnx2i_hba *hba = handle;
/* check if cleanup happened in GOING_DOWN context */
- clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
&hba->adapter_state))
iscsi_host_for_each_session(hba->shost,
bnx2i_drop_session);
+
+ /* Wait for all endpoints to be torn down, Chip will be reset once
+ * control returns to network driver. So it is required to cleanup and
+ * release all connection resources before returning from this routine.
+ */
+ wait_event_interruptible_timeout(hba->eh_wait,
+ (hba->ofld_conns_active == 0),
+ hba->hba_shutdown_tmo);
+ /* This flag should be cleared last so that ep_disconnect() gracefully
+ * cleans up connection context
+ */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
}
/**
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f2e9b18..fa68ab3 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -820,6 +820,11 @@
spin_lock_init(&hba->lock);
mutex_init(&hba->net_dev_lock);
+ init_waitqueue_head(&hba->eh_wait);
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ hba->hba_shutdown_tmo = 240 * HZ;
+ else /* 5706/5708/5709 */
+ hba->hba_shutdown_tmo = 30 * HZ;
if (iscsi_host_add(shost, &hba->pcidev->dev))
goto free_dump_mem;
@@ -1658,8 +1663,8 @@
*/
hba = bnx2i_check_route(dst_addr);
- if (!hba) {
- rc = -ENOMEM;
+ if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+ rc = -EINVAL;
goto check_busy;
}
@@ -1804,7 +1809,7 @@
(bnx2i_ep->state ==
EP_STATE_CONNECT_COMPL)),
msecs_to_jiffies(timeout_ms));
- if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ if (bnx2i_ep->state == EP_STATE_OFLD_FAILED)
rc = -1;
if (rc > 0)
@@ -1957,6 +1962,8 @@
if (!hba->ofld_conns_active)
bnx2i_unreg_dev_all();
+
+ wake_up_interruptible(&hba->eh_wait);
}
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 4967643..0435d04 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -188,7 +188,8 @@
static int adpt_detect(struct scsi_host_template* sht)
{
struct pci_dev *pDev = NULL;
- adpt_hba* pHba;
+ adpt_hba *pHba;
+ adpt_hba *next;
PINFO("Detecting Adaptec I2O RAID controllers...\n");
@@ -206,7 +207,8 @@
}
/* In INIT state, Activate IOPs */
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
// Activate does get status , init outbound, and get hrt
if (adpt_i2o_activate_hba(pHba) < 0) {
adpt_i2o_delete_hba(pHba);
@@ -243,7 +245,8 @@
PDEBUG("HBA's in OPERATIONAL state\n");
printk("dpti: If you have a lot of devices this could take a few minutes.\n");
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name);
if (adpt_i2o_lct_get(pHba) < 0){
adpt_i2o_delete_hba(pHba);
@@ -263,7 +266,8 @@
adpt_sysfs_class = NULL;
}
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
if (adpt_scsi_host_alloc(pHba, sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
@@ -1229,11 +1233,10 @@
}
}
pci_dev_put(pHba->pDev);
- kfree(pHba);
-
if (adpt_sysfs_class)
device_destroy(adpt_sysfs_class,
MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+ kfree(pHba);
if(hba_count <= 0){
unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ff5ec5a..88bad0e 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -323,16 +323,6 @@
srp_cmd->buf_fmt = fmt;
}
-static void unmap_sg_list(int num_entries,
- struct device *dev,
- struct srp_direct_buf *md)
-{
- int i;
-
- for (i = 0; i < num_entries; ++i)
- dma_unmap_single(dev, md[i].va, md[i].len, DMA_BIDIRECTIONAL);
-}
-
/**
* unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
* @cmd: srp_cmd whose additional_data member will be unmapped
@@ -350,24 +340,9 @@
if (out_fmt == SRP_NO_DATA_DESC && in_fmt == SRP_NO_DATA_DESC)
return;
- else if (out_fmt == SRP_DATA_DESC_DIRECT ||
- in_fmt == SRP_DATA_DESC_DIRECT) {
- struct srp_direct_buf *data =
- (struct srp_direct_buf *) cmd->add_data;
- dma_unmap_single(dev, data->va, data->len, DMA_BIDIRECTIONAL);
- } else {
- struct srp_indirect_buf *indirect =
- (struct srp_indirect_buf *) cmd->add_data;
- int num_mapped = indirect->table_desc.len /
- sizeof(struct srp_direct_buf);
- if (num_mapped <= MAX_INDIRECT_BUFS) {
- unmap_sg_list(num_mapped, dev, &indirect->desc_list[0]);
- return;
- }
-
- unmap_sg_list(num_mapped, dev, evt_struct->ext_list);
- }
+ if (evt_struct->cmnd)
+ scsi_dma_unmap(evt_struct->cmnd);
}
static int map_sg_list(struct scsi_cmnd *cmd, int nseg,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 0ee725c..02143af 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -599,7 +599,7 @@
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
- if (sock->sk->sk_sleep && waitqueue_active(sock->sk->sk_sleep)) {
+ if (sock->sk->sk_sleep) {
sock->sk->sk_err = EIO;
wake_up_interruptible(sock->sk->sk_sleep);
}
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index ec37238..d62b3e4 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -433,7 +433,7 @@
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
@@ -1196,7 +1196,7 @@
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 359e9a7..1c7ef55 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2393,6 +2393,7 @@
return 0;
done:
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (bsg_job->request->msgcode == FC_BSG_HST_CT)
kfree(sp->fcport);
kfree(sp->ctx);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 09d6d4b..caeb7d1 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -467,7 +467,7 @@
if (conn_err_detail)
*conn_err_detail = mbox_sts[5];
if (tcp_source_port_num)
- *tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
+ *tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16);
if (connection_id)
*connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
status = QLA_SUCCESS;
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index d0b7d2f..333580b 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1587,7 +1587,7 @@
{
Adapter *host = (Adapter *) SCpnt->device->host->hostdata;
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(SCpnt->device->host->host_lock);
if (wd7000_adapter_reset(host) < 0) {
spin_unlock_irq(SCpnt->device->host->host_lock);
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 24485cc..4822cb5 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -348,6 +348,8 @@
{ "FUJ02E6", 0 },
/* Fujitsu Wacom 2FGT Tablet PC device */
{ "FUJ02E7", 0 },
+ /* Fujitsu Wacom 1FGT Tablet PC device */
+ { "FUJ02E9", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 7bb5fee..b5aaef9 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -263,6 +263,7 @@
}
spin_lock_irqsave(&port->lock, flags);
+ uart_update_timeout(port, termios->c_cflag, baud);
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
@@ -379,6 +380,7 @@
static void mcf_config_port(struct uart_port *port, int flags)
{
port->type = PORT_MCF;
+ port->fifosize = MCFUART_TXFIFOSIZE;
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
@@ -424,7 +426,7 @@
/*
* Define the basic serial functions we support.
*/
-static struct uart_ops mcf_uart_ops = {
+static const struct uart_ops mcf_uart_ops = {
.tx_empty = mcf_tx_empty,
.get_mctrl = mcf_get_mctrl,
.set_mctrl = mcf_set_mctrl,
@@ -443,7 +445,7 @@
.verify_port = mcf_verify_port,
};
-static struct mcf_uart mcf_ports[3];
+static struct mcf_uart mcf_ports[4];
#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fdd..a176ab4 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -29,39 +29,6 @@
* kind, whether express or implied.
*/
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode. The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found. However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
#undef DEBUG
#include <linux/device.h>
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 4eaa043..700e108 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -752,8 +752,10 @@
uap->curregs[R5] = new_reg;
/* NOTE: Not subject to 'transmitter active' rule. */
- if (ZS_IS_ASLEEP(uap))
+ if (ZS_IS_ASLEEP(uap)) {
+ spin_unlock_irqrestore(&port->lock, flags);
return;
+ }
write_zsreg(uap, R5, uap->curregs[R5]);
}
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 2e71bbc..b196202 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -650,6 +650,7 @@
static int __init ks8695_console_init(void)
{
+ add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
register_console(&ks8695_console);
return 0;
}
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index d8356af..e0de0d0 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -204,6 +204,7 @@
cs->chconf0 = val;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
}
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
@@ -532,7 +533,7 @@
goto out;
}
#ifdef VERBOSE
- dev_dbg(&spi->dev, "write-%d %04x\n",
+ dev_dbg(&spi->dev, "write-%d %08x\n",
word_len, *tx);
#endif
__raw_writel(*tx++, tx_reg);
@@ -550,7 +551,7 @@
mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
- dev_dbg(&spi->dev, "read-%d %04x\n",
+ dev_dbg(&spi->dev, "read-%d %08x\n",
word_len, *(rx - 1));
#endif
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9ffb0fd..b3a1f92 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -41,7 +41,7 @@
spi->master->cleanup(spi);
spi_master_put(spi->master);
- kfree(dev);
+ kfree(spi);
}
static ssize_t
@@ -257,6 +257,7 @@
{
static DEFINE_MUTEX(spi_add_lock);
struct device *dev = spi->master->dev.parent;
+ struct device *d;
int status;
/* Chipselects are numbered 0..max; validate. */
@@ -278,10 +279,11 @@
*/
mutex_lock(&spi_add_lock);
- if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
- != NULL) {
+ d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev));
+ if (d != NULL) {
dev_err(dev, "chipselect %d already in use\n",
spi->chip_select);
+ put_device(d);
status = -EBUSY;
goto done;
}
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index a67c622..7ac2c6d 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -57,19 +57,8 @@
extern void printques(int);
-#ifdef MODULE
#include <linux/module.h>
#include <linux/interrupt.h>
-
-
-MODULE_LICENSE("GPL");
-
-#endif
-
-#ifndef CONFIG_PCI
-#error "DT3155 : Kernel PCI support not enabled (DT3155 drive requires PCI)"
-#endif
-
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/poll.h>
@@ -84,6 +73,9 @@
#include "dt3155_io.h"
#include "allocator.h"
+
+MODULE_LICENSE("GPL");
+
/* Error variable. Zero means no error. */
int dt3155_errno = 0;
@@ -472,9 +464,9 @@
/* 50/60 Hz should be set before this point but let's make sure it is */
/* right anyway */
- ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
- WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+ WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
/* enable busmaster chip, clear flags */
diff --git a/drivers/staging/hv/Hv.c b/drivers/staging/hv/Hv.c
index 5d53889..3a1112d 100644
--- a/drivers/staging/hv/Hv.c
+++ b/drivers/staging/hv/Hv.c
@@ -306,9 +306,9 @@
DPRINT_ENTER(VMBUS);
if (gHvContext.SignalEventBuffer) {
+ kfree(gHvContext.SignalEventBuffer);
gHvContext.SignalEventBuffer = NULL;
gHvContext.SignalEventParam = NULL;
- kfree(gHvContext.SignalEventBuffer);
}
if (gHvContext.HypercallPage) {
diff --git a/drivers/staging/hv/RndisFilter.c b/drivers/staging/hv/RndisFilter.c
index cd2930d..6704f64 100644
--- a/drivers/staging/hv/RndisFilter.c
+++ b/drivers/staging/hv/RndisFilter.c
@@ -751,6 +751,7 @@
ret = RndisFilterSetPacketFilter(Device,
NDIS_PACKET_TYPE_BROADCAST |
+ NDIS_PACKET_TYPE_ALL_MULTICAST |
NDIS_PACKET_TYPE_DIRECTED);
if (ret == 0)
Device->State = RNDIS_DEV_DATAINITIALIZED;
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 2ccb6b9..ab27d9a 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -403,8 +403,7 @@
if (!net_drv_obj->Base.OnDeviceAdd)
return -1;
- net = alloc_netdev(sizeof(struct net_device_context), "seth%d",
- ether_setup);
+ net = alloc_etherdev(sizeof(struct net_device_context));
if (!net)
return -1;
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index ea76902..82e4358 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -618,7 +618,7 @@
static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
{
struct iio_work_cont *wc
- = container_of(work_s, struct iio_work_cont, ws_nocheck);
+ = container_of(work_s, struct iio_work_cont, ws);
struct lis3l02dq_state *st = wc->st;
u8 t;
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 9371243..a4d97ea 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -493,6 +493,9 @@
struct lis3l02dq_state *state = indio_dev->dev_data;
state->trig = iio_allocate_trigger();
+ if (!state->trig)
+ return -ENOMEM;
+
state->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
if (!state->trig->name) {
ret = -ENOMEM;
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index 790d1cc..773f1d1 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -557,6 +557,7 @@
if (!IS_ERR(st->reg))
regulator_put(st->reg);
error_free_st:
+ i2c_set_clientdata(client, NULL);
kfree(st);
error_ret:
@@ -574,6 +575,7 @@
regulator_disable(st->reg);
regulator_put(st->reg);
}
+ i2c_set_clientdata(client, NULL);
kfree(st);
return 0;
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index 37f58f6..1d77082 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -537,6 +537,7 @@
sysfs_remove_group(&dev_info->dev.kobj, dev_info->attrs);
}
+/* Return a negative errno on failure */
int iio_get_new_idr_val(struct idr *this_idr)
{
int ret;
@@ -660,7 +661,7 @@
for (i = 0; i < dev_info->num_interrupt_lines; i++) {
dev_info->event_interfaces[i].owner = dev_info->driver_module;
ret = iio_get_new_idr_val(&iio_event_idr);
- if (ret)
+ if (ret < 0)
goto error_free_setup_ev_ints;
else
dev_info->event_interfaces[i].id = ret;
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 1ba4aa3..8770a00 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -682,6 +682,7 @@
fail2:
iio_device_unregister(chip->indio_dev);
fail1:
+ i2c_set_clientdata(client, NULL);
kfree(chip);
return err;
}
@@ -692,6 +693,7 @@
iio_device_unregister(chip->indio_dev);
+ i2c_set_clientdata(client, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index b104c3d..cf22c09 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -293,7 +293,7 @@
return -EAGAIN;
memcpy(data, last_written_p_copy, ring->buf.bpd);
- if (unlikely(ring->last_written_p >= last_written_p_copy))
+ if (unlikely(ring->last_written_p != last_written_p_copy))
goto again;
iio_unmark_sw_rb_in_use(&ring->buf);
diff --git a/drivers/staging/octeon/cvmx-helper-board.c b/drivers/staging/octeon/cvmx-helper-board.c
index 3085e38..00a555b 100644
--- a/drivers/staging/octeon/cvmx-helper-board.c
+++ b/drivers/staging/octeon/cvmx-helper-board.c
@@ -153,6 +153,14 @@
* through switch.
*/
return -1;
+
+ case CVMX_BOARD_TYPE_CUST_WSX16:
+ if (ipd_port >= 0 && ipd_port <= 3)
+ return ipd_port;
+ else if (ipd_port >= 16 && ipd_port <= 19)
+ return ipd_port - 16 + 4;
+ else
+ return -1;
}
/* Some unknown board. Somebody forgot to update this function... */
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index 1873a79..740db0c 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -63,6 +63,7 @@
{USB_DEVICE(0x07D1, 0x3C11)}, /* D-Link */
{USB_DEVICE(0x14B2, 0x3C07)}, /* AL */
{USB_DEVICE(0x050D, 0x8053)}, /* Belkin */
+ {USB_DEVICE(0x050D, 0x825B)}, /* Belkin */
{USB_DEVICE(0x14B2, 0x3C23)}, /* Airlink */
{USB_DEVICE(0x14B2, 0x3C27)}, /* Airlink */
{USB_DEVICE(0x07AA, 0x002F)}, /* Corega */
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index e16256fe..04d9b85 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -113,14 +113,17 @@
static const struct usb_device_id rtl8192_usb_id_tbl[] = {
/* Realtek */
+ {USB_DEVICE(0x0bda, 0x8171)},
{USB_DEVICE(0x0bda, 0x8192)},
{USB_DEVICE(0x0bda, 0x8709)},
/* Corega */
{USB_DEVICE(0x07aa, 0x0043)},
/* Belkin */
{USB_DEVICE(0x050d, 0x805E)},
+ {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
/* Sitecom */
{USB_DEVICE(0x0df6, 0x0031)},
+ {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
/* EnGenius */
{USB_DEVICE(0x1740, 0x9201)},
/* Dlink */
diff --git a/drivers/staging/usbip/usbip_event.c b/drivers/staging/usbip/usbip_event.c
index 6da1021..a2566f1 100644
--- a/drivers/staging/usbip/usbip_event.c
+++ b/drivers/staging/usbip/usbip_event.c
@@ -117,6 +117,9 @@
{
struct usbip_task *eh = &ud->eh;
+ if (eh->thread == current)
+ return; /* do not wait for myself */
+
wait_for_completion(&eh->thread_done);
usbip_dbg_eh("usbip_eh has finished\n");
}
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index 68f2442..783051f 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -2455,9 +2455,10 @@
dev_info(&pdev->dev, "VME Write and flush and error check is %s\n",
err_chk ? "enabled" : "disabled");
- if (tsi148_crcsr_init(tsi148_bridge, pdev))
+ if (tsi148_crcsr_init(tsi148_bridge, pdev)) {
dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
goto err_crcsr;
+ }
retval = vme_register_bridge(tsi148_bridge);
if (retval != 0) {
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index be6331e..5e1a253 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1542,6 +1542,9 @@
{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
/* Nokia S60 phones expose two ACM channels. The first is
* a modem and is picked up by the standard AT-command
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 97a819c..7e594449 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -109,7 +109,7 @@
config USB_OTG
bool
depends on USB && EXPERIMENTAL
- select USB_SUSPEND
+ depends on USB_SUSPEND
default n
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 6a3b5ca..2f3dc4c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -301,7 +301,7 @@
intf->condition = USB_INTERFACE_BINDING;
- /* Bound interfaces are initially active. They are
+ /* Probed interfaces are initially active. They are
* runtime-PM-enabled only if the driver has autosuspend support.
* They are sensitive to their children's power states.
*/
@@ -437,11 +437,11 @@
iface->condition = USB_INTERFACE_BOUND;
- /* Bound interfaces are initially active. They are
+ /* Claimed interfaces are initially inactive (suspended). They are
* runtime-PM-enabled only if the driver has autosuspend support.
* They are sensitive to their children's power states.
*/
- pm_runtime_set_active(dev);
+ pm_runtime_set_suspended(dev);
pm_suspend_ignore_children(dev, false);
if (driver->supports_autosuspend)
pm_runtime_enable(dev);
@@ -1170,7 +1170,7 @@
static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
- int i = 0;
+ int i = 0, n = 0;
struct usb_interface *intf;
if (udev->state == USB_STATE_NOTATTACHED ||
@@ -1179,7 +1179,8 @@
/* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
- for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ n = udev->actconfig->desc.bNumInterfaces;
+ for (i = n - 1; i >= 0; --i) {
intf = udev->actconfig->interface[i];
status = usb_suspend_interface(udev, intf, msg);
if (status != 0)
@@ -1192,7 +1193,7 @@
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
- while (--i >= 0) {
+ while (++i < n) {
intf = udev->actconfig->interface[i];
usb_resume_interface(udev, intf, msg, 0);
}
@@ -1263,13 +1264,47 @@
return status;
}
+static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
+{
+ int w, i;
+ struct usb_interface *intf;
+
+ /* Remote wakeup is needed only when we actually go to sleep.
+ * For things like FREEZE and QUIESCE, if the device is already
+ * autosuspended then its current wakeup setting is okay.
+ */
+ if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) {
+ if (udev->state != USB_STATE_SUSPENDED)
+ udev->do_remote_wakeup = 0;
+ return;
+ }
+
+ /* If remote wakeup is permitted, see whether any interface drivers
+ * actually want it.
+ */
+ w = 0;
+ if (device_may_wakeup(&udev->dev) && udev->actconfig) {
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ w |= intf->needs_remote_wakeup;
+ }
+ }
+
+ /* If the device is autosuspended with the wrong wakeup setting,
+ * autoresume now so the setting can be changed.
+ */
+ if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
+ pm_runtime_resume(&udev->dev);
+ udev->do_remote_wakeup = w;
+}
+
/* The device lock is held by the PM core */
int usb_suspend(struct device *dev, pm_message_t msg)
{
struct usb_device *udev = to_usb_device(dev);
do_unbind_rebind(udev, DO_UNBIND);
- udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+ choose_wakeup(udev, msg);
return usb_suspend_both(udev, msg);
}
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index bdf87a8..2c95153 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -120,7 +120,7 @@
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
- (!desc || desc->bInterfaceClass !=
+ (desc && desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 97b40ce..4a6366a 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -515,13 +515,13 @@
*dentry = NULL;
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(dentry)) {
+ if (!IS_ERR(*dentry)) {
if ((mode & S_IFMT) == S_IFDIR)
error = usbfs_mkdir (parent->d_inode, *dentry, mode);
else
error = usbfs_create (parent->d_inode, *dentry, mode);
} else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 1297e9b..0561430 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -718,7 +718,7 @@
EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
/**
- * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+ * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
* @dev: device the buffer will be used with
* @size: requested buffer size
* @mem_flags: affect whether allocation may block
@@ -737,30 +737,30 @@
* architectures where CPU caches are not DMA-coherent. On systems without
* bus-snooping caches, these buffers are uncached.
*
- * When the buffer is no longer used, free it with usb_buffer_free().
+ * When the buffer is no longer used, free it with usb_free_coherent().
*/
-void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags,
- dma_addr_t *dma)
+void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
+ dma_addr_t *dma)
{
if (!dev || !dev->bus)
return NULL;
return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
}
-EXPORT_SYMBOL_GPL(usb_buffer_alloc);
+EXPORT_SYMBOL_GPL(usb_alloc_coherent);
/**
- * usb_buffer_free - free memory allocated with usb_buffer_alloc()
+ * usb_free_coherent - free memory allocated with usb_alloc_coherent()
* @dev: device the buffer was used with
* @size: requested buffer size
* @addr: CPU address of buffer
* @dma: DMA address of buffer
*
* This reclaims an I/O buffer, letting it be reused. The memory must have
- * been allocated using usb_buffer_alloc(), and the parameters must match
+ * been allocated using usb_alloc_coherent(), and the parameters must match
* those provided in that allocation request.
*/
-void usb_buffer_free(struct usb_device *dev, size_t size, void *addr,
- dma_addr_t dma)
+void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
+ dma_addr_t dma)
{
if (!dev || !dev->bus)
return;
@@ -768,7 +768,7 @@
return;
hcd_buffer_free(dev->bus, size, addr, dma);
}
-EXPORT_SYMBOL_GPL(usb_buffer_free);
+EXPORT_SYMBOL_GPL(usb_free_coherent);
/**
* usb_buffer_map - create DMA mapping(s) for an urb
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 124a8cc..1f73b48 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2145,6 +2145,7 @@
u32 epctrl;
u32 mps;
int dir_in;
+ int ret = 0;
dev_dbg(hsotg->dev,
"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
@@ -2196,7 +2197,8 @@
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
dev_err(hsotg->dev, "no current ISOC support\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
case USB_ENDPOINT_XFER_BULK:
epctrl |= S3C_DxEPCTL_EPType_Bulk;
@@ -2235,8 +2237,9 @@
/* enable the endpoint interrupt */
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+out:
spin_unlock_irqrestore(&hs_ep->lock, flags);
- return 0;
+ return ret;
}
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 207e7a85..13ead00 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -543,6 +543,7 @@
*/
ehci->periodic_size = DEFAULT_I_TDPS;
INIT_LIST_HEAD(&ehci->cached_itd_list);
+ INIT_LIST_HEAD(&ehci->cached_sitd_list);
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1937267..c7178bc 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -801,7 +801,7 @@
* this bit; seems too long to spin routinely...
*/
retval = handshake(ehci, status_reg,
- PORT_RESET, 0, 750);
+ PORT_RESET, 0, 1000);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
wIndex + 1, retval);
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index aeda96e..1f3f01e 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -136,7 +136,7 @@
static void ehci_mem_cleanup (struct ehci_hcd *ehci)
{
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
if (ehci->async)
qh_put (ehci->async);
ehci->async = NULL;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index a67a003..40a8583 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -629,11 +629,13 @@
}
snprintf(supply, sizeof(supply), "hsusb%d", i);
omap->regulator[i] = regulator_get(omap->dev, supply);
- if (IS_ERR(omap->regulator[i]))
+ if (IS_ERR(omap->regulator[i])) {
+ omap->regulator[i] = NULL;
dev_dbg(&pdev->dev,
"failed to get ehci port%d regulator\n", i);
- else
+ } else {
regulator_enable(omap->regulator[i]);
+ }
}
ret = omap_start_ehc(omap, hcd);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a0aaaaf..805ec63 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -510,7 +510,7 @@
ehci_writel(ehci, cmd, &ehci->regs->command);
/* posted write ... */
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->next_uframe = -1;
return 0;
@@ -2139,13 +2139,27 @@
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
- /* OK to recycle this SITD now that its completion callback ran. */
+
done:
sitd->urb = NULL;
- sitd->stream = NULL;
- list_move(&sitd->sitd_list, &stream->free_list);
- iso_stream_put(ehci, stream);
-
+ if (ehci->clock_frame != sitd->frame) {
+ /* OK to recycle this SITD now. */
+ sitd->stream = NULL;
+ list_move(&sitd->sitd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ } else {
+ /* HW might remember this SITD, so we can't recycle it yet.
+ * Move it to a safe place until a new frame starts.
+ */
+ list_move(&sitd->sitd_list, &ehci->cached_sitd_list);
+ if (stream->refcount == 2) {
+ /* If iso_stream_put() were called here, stream
+ * would be freed. Instead, just prevent reuse.
+ */
+ stream->ep->hcpriv = NULL;
+ stream->ep = NULL;
+ }
+ }
return retval;
}
@@ -2211,9 +2225,10 @@
/*-------------------------------------------------------------------------*/
-static void free_cached_itd_list(struct ehci_hcd *ehci)
+static void free_cached_lists(struct ehci_hcd *ehci)
{
struct ehci_itd *itd, *n;
+ struct ehci_sitd *sitd, *sn;
list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
struct ehci_iso_stream *stream = itd->stream;
@@ -2221,6 +2236,13 @@
list_move(&itd->itd_list, &stream->free_list);
iso_stream_put(ehci, stream);
}
+
+ list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) {
+ struct ehci_iso_stream *stream = sitd->stream;
+ sitd->stream = NULL;
+ list_move(&sitd->sitd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ }
}
/*-------------------------------------------------------------------------*/
@@ -2247,7 +2269,7 @@
clock_frame = -1;
}
if (ehci->clock_frame != clock_frame) {
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
clock %= mod;
@@ -2414,7 +2436,7 @@
clock = now;
clock_frame = clock >> 3;
if (ehci->clock_frame != clock_frame) {
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
} else {
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index b1dce96..556c0b4 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -87,8 +87,9 @@
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
- /* list of itds completed while clock_frame was still active */
+ /* list of itds & sitds completed while clock_frame was still active */
struct list_head cached_itd_list;
+ struct list_head cached_sitd_list;
unsigned clock_frame;
/* per root hub port */
@@ -195,7 +196,7 @@
clear_bit (action, &ehci->actions);
}
-static void free_cached_itd_list(struct ehci_hcd *ehci);
+static void free_cached_lists(struct ehci_hcd *ehci);
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 68b83ab..944291e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -331,6 +331,8 @@
*/
if (at91_suspend_entering_slow_clock()) {
ohci_usb_reset (ohci);
+ /* flush the writes */
+ (void) ohci_readl (ohci, &ohci->regs->control);
at91_stop_clock();
}
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 4aa08d3..d22fb4d 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -23,7 +23,7 @@
#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
#endif
-#define CFGCHIP2 DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)
+#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
static struct clk *usb11_clk;
static struct clk *usb20_clk;
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 32bbce9..65cac8c 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -697,7 +697,7 @@
u16 wLength
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports = hcd_to_bus (hcd)->root_hub->maxchild;
+ int ports = ohci->num_ports;
u32 temp;
int retval = 0;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 50f57f4..e62b30b 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -660,13 +660,13 @@
if (qh->dummy == NULL) {
oxu_dbg(oxu, "no dummy td\n");
oxu->qh_used[i] = 0;
-
- return NULL;
+ qh = NULL;
+ goto unlock;
}
oxu->qh_used[i] = 1;
}
-
+unlock:
spin_unlock(&oxu->mem_lock);
return qh;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index e11cc3a..3b867a8 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -720,10 +720,10 @@
/* port status seems weird until after reset, so
* force the reset and make khubd clean up later.
*/
- if (sl811->stat_insrmv & 1)
- sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
- else
+ if (irqstat & SL11H_INTMASK_RD)
sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+ else
+ sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c09539b..d64f572 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -582,6 +582,19 @@
return EP_INTERVAL(interval);
}
+/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+ * High speed endpoint descriptors can define "the number of additional
+ * transaction opportunities per microframe", but that goes in the Max Burst
+ * endpoint context field.
+ */
+static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp)
+ return 0;
+ return ep->ss_ep_comp->desc.bmAttributes;
+}
+
static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
@@ -612,6 +625,36 @@
return type;
}
+/* Return the maximum endpoint service interval time (ESIT) payload.
+ * Basically, this is the maxpacket size, multiplied by the burst size
+ * and mult size.
+ */
+static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ int max_burst;
+ int max_packet;
+
+ /* Only applies for interrupt or isochronous endpoints */
+ if (usb_endpoint_xfer_control(&ep->desc) ||
+ usb_endpoint_xfer_bulk(&ep->desc))
+ return 0;
+
+ if (udev->speed == USB_SPEED_SUPER) {
+ if (ep->ss_ep_comp)
+ return ep->ss_ep_comp->desc.wBytesPerInterval;
+ xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+ /* Assume no bursts, no multiple opportunities to send. */
+ return ep->desc.wMaxPacketSize;
+ }
+
+ max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+ /* A 0 in max burst means 1 transfer per ESIT */
+ return max_packet * (max_burst + 1);
+}
+
int xhci_endpoint_init(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *udev,
@@ -623,6 +666,7 @@
struct xhci_ring *ep_ring;
unsigned int max_packet;
unsigned int max_burst;
+ u32 max_esit_payload;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
@@ -644,6 +688,7 @@
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
+ ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep));
/* FIXME dig Mult and streams info out of ep companion desc */
@@ -689,6 +734,26 @@
default:
BUG();
}
+ max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
+ ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload);
+
+ /*
+ * XXX no idea how to calculate the average TRB buffer length for bulk
+ * endpoints, as the driver gives us no clue how big each scatter gather
+ * list entry (or buffer) is going to be.
+ *
+ * For isochronous and interrupt endpoints, we set it to the max
+ * available, until we have new API in the USB core to allow drivers to
+ * declare how much bandwidth they actually need.
+ *
+ * Normally, it would be calculated by taking the total of the buffer
+ * lengths in the TD and then dividing by the number of TRBs in a TD,
+ * including link TRBs, No-op TRBs, and Event data TRBs. Since we don't
+ * use Event Data TRBs, and we don't chain in a link TRB on short
+ * transfers, we're basically dividing by 1.
+ */
+ ep_ctx->tx_info |= AVG_TRB_LENGTH_FOR_EP(max_esit_payload);
+
/* FIXME Debug endpoint context */
return 0;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e5eb09b..ea389e9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -609,6 +609,10 @@
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
+/* tx_info bitmasks */
+#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
+#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
+
/**
* struct xhci_input_control_context
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index a9555cb..de8ef94 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -49,6 +49,7 @@
u16 textlength;
u8 shadow_power; /* for PM */
+ u8 has_interface_pm;
};
/* sysfs_streq can't replace this completely
@@ -68,12 +69,16 @@
{
int rc;
- if (!mydev->shadow_power && mydev->powered) {
+ if (mydev->powered && !mydev->has_interface_pm) {
rc = usb_autopm_get_interface(mydev->intf);
if (rc < 0)
return;
+ mydev->has_interface_pm = 1;
}
+ if (mydev->shadow_power != 1)
+ return;
+
rc = usb_control_msg(mydev->udev,
usb_sndctrlpipe(mydev->udev, 0),
0x12,
@@ -86,8 +91,10 @@
if (rc < 0)
dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc);
- if (mydev->shadow_power && !mydev->powered)
+ if (!mydev->powered && mydev->has_interface_pm) {
usb_autopm_put_interface(mydev->intf);
+ mydev->has_interface_pm = 0;
+ }
}
static void update_display_mode(struct usb_sevsegdev *mydev)
@@ -351,6 +358,10 @@
mydev->intf = interface;
usb_set_intfdata(interface, mydev);
+ /* PM */
+ mydev->shadow_power = 1; /* currently active */
+ mydev->has_interface_pm = 0; /* have not issued autopm_get */
+
/*set defaults */
mydev->textmode = 0x02; /* ascii mode */
mydev->mode_msb = 0x06; /* 6 characters */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b4c783c..07fe490 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -42,7 +42,7 @@
default y if (BF52x && !BF522 && !BF523)
comment "DaVinci 35x and 644x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI
+ depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
comment "OMAP 243x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP2430
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 85710cc..3a485da 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
-ifeq ($(CONFIG_ARCH_DAVINCI),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
musb_hdrc-objs += davinci.o
endif
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 719a22d..ec8d324 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -172,13 +172,7 @@
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get spurious IRQs on g_ep0
- * not clear why... fall in BF54x too.
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "spurious?\n");
-
- return IRQ_HANDLED;
+ return retval;
}
static void musb_conn_timer_handler(unsigned long _musb)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 29bce5c0..ce2e16f 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -444,6 +444,8 @@
return 0;
fail:
+ clk_disable(musb->clock);
+
usb_nop_xceiv_unregister();
return -ENODEV;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0e8b8ab..705cc4a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -965,10 +965,8 @@
spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
musb_generic_disable(musb);
- if (musb->clock) {
+ if (musb->clock)
clk_put(musb->clock);
- musb->clock = NULL;
- }
spin_unlock_irqrestore(&musb->lock, flags);
/* FIXME power down */
@@ -1853,15 +1851,6 @@
put_device(musb->xceiv->dev);
#endif
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
- musb_platform_exit(musb);
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-
- if (musb->clock) {
- clk_disable(musb->clock);
- clk_put(musb->clock);
- }
-
#ifdef CONFIG_USB_MUSB_HDRC_HCD
usb_put_hcd(musb_to_hcd(musb));
#else
@@ -1889,8 +1878,10 @@
*/
if (!plat) {
dev_dbg(dev, "no platform_data?\n");
- return -ENODEV;
+ status = -ENODEV;
+ goto fail0;
}
+
switch (plat->mode) {
case MUSB_HOST:
#ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1912,13 +1903,16 @@
#endif
default:
dev_err(dev, "incompatible Kconfig role setting\n");
- return -EINVAL;
+ status = -EINVAL;
+ goto fail0;
}
/* allocate */
musb = allocate_instance(dev, plat->config, ctrl);
- if (!musb)
- return -ENOMEM;
+ if (!musb) {
+ status = -ENOMEM;
+ goto fail0;
+ }
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
@@ -1936,7 +1930,7 @@
if (IS_ERR(musb->clock)) {
status = PTR_ERR(musb->clock);
musb->clock = NULL;
- goto fail;
+ goto fail1;
}
}
@@ -1955,12 +1949,12 @@
*/
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
-
if (status < 0)
- goto fail;
+ goto fail2;
+
if (!musb->isr) {
status = -ENODEV;
- goto fail2;
+ goto fail3;
}
#ifndef CONFIG_MUSB_PIO_ONLY
@@ -1986,7 +1980,7 @@
? MUSB_CONTROLLER_MHDRC
: MUSB_CONTROLLER_HDRC, musb);
if (status < 0)
- goto fail2;
+ goto fail3;
#ifdef CONFIG_USB_MUSB_OTG
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
@@ -1999,7 +1993,7 @@
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
status = -ENODEV;
- goto fail2;
+ goto fail3;
}
musb->nIrq = nIrq;
/* FIXME this handles wakeup irqs wrong */
@@ -2039,8 +2033,6 @@
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
- if (status)
- goto fail;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
@@ -2055,8 +2047,6 @@
musb->xceiv->state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
- if (status)
- goto fail;
DBG(1, "%s mode, status %d, dev%02x\n",
is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
@@ -2064,12 +2054,14 @@
musb_readb(musb->mregs, MUSB_DEVCTL));
}
+ if (status < 0)
+ goto fail3;
#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
-#endif
if (status)
- goto fail2;
+ goto fail4;
+#endif
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
@@ -2085,17 +2077,29 @@
return 0;
-fail2:
+fail4:
+ if (!is_otg_enabled(musb) && is_host_enabled(musb))
+ usb_remove_hcd(musb_to_hcd(musb));
+ else
+ musb_gadget_cleanup(musb);
+
+fail3:
+ if (musb->irq_wake)
+ device_init_wakeup(dev, 0);
musb_platform_exit(musb);
-fail:
+
+fail2:
+ if (musb->clock)
+ clk_put(musb->clock);
+
+fail1:
dev_err(musb->controller,
"musb_init_controller failed with status %d\n", status);
- if (musb->clock)
- clk_put(musb->clock);
- device_init_wakeup(dev, 0);
musb_free(musb);
+fail0:
+
return status;
}
@@ -2132,7 +2136,6 @@
/* clobbered by use_dma=n */
orig_dma_mask = dev->dma_mask;
#endif
-
status = musb_init_controller(dev, irq, base);
if (status < 0)
iounmap(base);
@@ -2155,6 +2158,10 @@
if (musb->board_mode == MUSB_HOST)
usb_remove_hcd(musb_to_hcd(musb));
#endif
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_platform_exit(musb);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
musb_free(musb);
iounmap(ctrl_base);
device_init_wakeup(&pdev->dev, 0);
@@ -2176,6 +2183,7 @@
if (is_host_enabled(musb)) {
musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+ musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
}
musb_context.power = musb_readb(musb_base, MUSB_POWER);
musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
@@ -2247,6 +2255,7 @@
if (is_host_enabled(musb)) {
musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
+ musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl);
}
musb_writeb(musb_base, MUSB_POWER, musb_context.power);
musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index cd9f4a9..ac17b00 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -478,7 +478,7 @@
u16 frame;
u8 index, testmode;
- u8 devctl, misc;
+ u8 devctl, busctl, misc;
struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index dec896e..877d20b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2042,6 +2042,7 @@
* odd, rare, error prone, but legal.
*/
kfree(qh);
+ qh = NULL;
ret = 0;
} else
ret = musb_schedule(musb, qh,
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 490cdf1..8259263 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -331,8 +331,5 @@
musb_platform_suspend(musb);
- clk_put(musb->clock);
- musb->clock = NULL;
-
return 0;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index ab776a8..60d3938 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,6 +29,19 @@
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
+#ifdef CONFIG_PM
+/* REVISIT: These should be only needed if somebody implements off idle */
+void musb_platform_save_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+}
+
+void musb_platform_restore_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+}
+#endif
+
/*
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 5afa070..c061a88 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -39,7 +39,7 @@
struct tusb_omap_dma *tusb_dma;
- void __iomem *dma_addr;
+ dma_addr_t dma_addr;
u32 len;
u16 packet_sz;
@@ -126,6 +126,7 @@
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *ep_conf = hw_ep->conf;
void __iomem *mbase = musb->mregs;
@@ -173,13 +174,15 @@
DBG(3, "Using PIO for remaining %lu bytes\n", pio);
buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
if (chdat->tx) {
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_TO_DEVICE);
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_TO_DEVICE);
musb_write_fifo(hw_ep, pio, buf);
} else {
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_FROM_DEVICE);
musb_read_fifo(hw_ep, pio, buf);
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_FROM_DEVICE);
}
channel->actual_len += pio;
}
@@ -224,6 +227,7 @@
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *mbase = musb->mregs;
void __iomem *ep_conf = hw_ep->conf;
@@ -299,14 +303,16 @@
chdat->packet_sz = packet_sz;
chdat->len = len;
channel->actual_len = 0;
- chdat->dma_addr = (void __iomem *)dma_addr;
+ chdat->dma_addr = dma_addr;
channel->status = MUSB_DMA_STATUS_BUSY;
/* Since we're recycling dma areas, we need to clean or invalidate */
if (chdat->tx)
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_TO_DEVICE);
else
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_FROM_DEVICE);
/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
if ((dma_addr & 0x3) == 0) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ca9d866..84d0eda 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -305,6 +305,11 @@
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710 0xfff1
#define ZTE_PRODUCT_AC2726 0xfff5
+#define ZTE_PRODUCT_AC8710T 0xffff
+
+/* ZTE PRODUCTS -- alternate vendor ID */
+#define ZTE_VENDOR_ID2 0x1d6b
+#define ZTE_PRODUCT_MF_330 0x0002
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -373,6 +378,8 @@
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
+#define CINTERION_VENDOR_ID 0x0681
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -679,6 +686,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -716,6 +725,7 @@
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
+ { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 73d5f34..c28b160 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -59,6 +59,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -97,6 +98,7 @@
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index d640dc9..23c09b3 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -20,6 +20,7 @@
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
#define PL2303_PRODUCT_ID_GPRS 0x0609
+#define PL2303_PRODUCT_ID_HCR331 0x331a
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
@@ -134,3 +135,7 @@
/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
#define SANWA_VENDOR_ID 0x11ad
#define SANWA_PRODUCT_ID 0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID 0x0b63
+#define ADLINK_ND6530_PRODUCT_ID 0x6530
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 0b93620..7e3bea2 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -42,6 +42,14 @@
#define CMOTECH_PRODUCT_CDU550 0x5553
#define CMOTECH_PRODUCT_CDX650 0x6512
+/* LG devices */
+#define LG_VENDOR_ID 0x1004
+#define LG_PRODUCT_VX4400_6000 0x6000 /* VX4400/VX6000/Rumor */
+
+/* Sanyo devices */
+#define SANYO_VENDOR_ID 0x0474
+#define SANYO_PRODUCT_KATANA_LX 0x0754 /* SCP-3800 (Katana LX) */
+
static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
@@ -51,6 +59,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 9202f94..ef0bdb0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -230,6 +230,7 @@
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
{ USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */
{ USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0afe5c7..e1bfda3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -172,7 +172,7 @@
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -180,6 +180,9 @@
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
@@ -192,7 +195,7 @@
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -200,6 +203,9 @@
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -287,6 +293,8 @@
MODULE_FIRMWARE("mts_cdma.fw");
MODULE_FIRMWARE("mts_gsm.fw");
MODULE_FIRMWARE("mts_edge.fw");
+MODULE_FIRMWARE("mts_mt9234mu.fw");
+MODULE_FIRMWARE("mts_mt9234zba.fw");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
@@ -1687,6 +1695,7 @@
const struct firmware *fw_p;
char buf[32];
+ dbg("%s\n", __func__);
/* try ID specific firmware first, then try generic firmware */
sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
dev->descriptor.idProduct);
@@ -1703,7 +1712,15 @@
case MTS_EDGE_PRODUCT_ID:
strcpy(buf, "mts_edge.fw");
break;
- }
+ case MTS_MT9234MU_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234mu.fw");
+ break;
+ case MTS_MT9234ZBA_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234zba.fw");
+ break;
+ case MTS_MT9234ZBAOLD_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234zba.fw");
+ break; }
}
if (buf[0] == '\0') {
if (tdev->td_is_3410)
@@ -1718,7 +1735,7 @@
return -ENOENT;
}
if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
- dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+ dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
return -ENOENT;
}
@@ -1730,6 +1747,7 @@
status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
} else {
+ dbg("%s ENOMEM\n", __func__);
status = -ENOMEM;
}
release_firmware(fw_p);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index f323c60..2aac195 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -45,6 +45,9 @@
#define MTS_CDMA_PRODUCT_ID 0xF110
#define MTS_GSM_PRODUCT_ID 0xF111
#define MTS_EDGE_PRODUCT_ID 0xF112
+#define MTS_MT9234MU_PRODUCT_ID 0xF114
+#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
+#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
/* Commands */
#define TI_GET_VERSION 0x01
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 46e79d3..7ec24e4 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -438,7 +438,7 @@
old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
keep_alives = 0;
for (cnt = 0;
- keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max;
+ keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max;
cnt++) {
unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 581d2db..ecf4055 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -49,6 +49,7 @@
M_MBP_2, /* MacBook Pro 2nd gen */
M_MBP_SR, /* MacBook Pro (Santa Rosa) */
M_MBP_4, /* MacBook Pro, 4th gen */
+ M_MBP_5_1, /* MacBook Pro, 5,1th gen */
M_UNKNOWN /* placeholder */
};
@@ -70,6 +71,7 @@
[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
+ [M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
};
@@ -106,6 +108,7 @@
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
{},
};
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 3aed388..bfec7c2 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -103,7 +103,8 @@
num = min(num, ARRAY_SIZE(vb->pfns));
for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
- struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY);
+ struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY |
+ __GFP_NOMEMALLOC | __GFP_NOWARN);
if (!page) {
if (printk_ratelimit())
dev_printk(KERN_INFO, &vb->vdev->dev,
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index ef36fca..3a7e9ff 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <asm/irq.h>
#include <mach/hardware.h>
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 1ed3d55..17726a0 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -115,9 +115,8 @@
static inline int w1_DS18B20_convert_temp(u8 rom[9])
{
- int t = ((s16)rom[1] << 8) | rom[0];
- t = t*1000/16;
- return t;
+ s16 t = le16_to_cpup((__le16 *)rom);
+ return t*1000/16;
}
static inline int w1_DS18S20_convert_temp(u8 rom[9])
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 500d383..801ead1 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -121,7 +121,7 @@
return count;
}
-static const struct watchdog_info ident = {
+static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "PowerPC Book-E Watchdog",
};
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 88ed54e..59359c9 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -244,7 +244,7 @@
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. (1<=timeout<=3600, default="
- __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+ __MODULE_STRING(WDT_TIMEOUT) ")");
MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
"Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index c8eadd4..88c83aa 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -67,8 +67,8 @@
void sbwdog_set(char __iomem *wdog, unsigned long t)
{
spin_lock(&sbwd_lock);
- __raw_writeb(0, wdog - 0x10);
- __raw_writeq(t & 0x7fffffUL, wdog);
+ __raw_writeb(0, wdog);
+ __raw_writeq(t & 0x7fffffUL, wdog - 0x10);
spin_unlock(&sbwd_lock);
}
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index 8d44c9b..c7d67e9 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -30,7 +30,7 @@
static int nowayout = WATCHDOG_NOWAYOUT;
static unsigned int margin = 60; /* (secs) Default is 1 minute */
static unsigned long wdt_status;
-static DEFINE_SPINLOCK(wdt_lock);
+static DEFINE_MUTEX(wdt_lock);
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
@@ -45,26 +45,26 @@
static void wdt_send_data(unsigned char command, unsigned char data)
{
- outb(command, COMMAND_PORT);
- msleep(100);
outb(data, DATA_PORT);
msleep(200);
+ outb(command, COMMAND_PORT);
+ msleep(100);
}
static void wdt_enable(void)
{
- spin_lock(&wdt_lock);
+ mutex_lock(&wdt_lock);
wdt_send_data(IFACE_ON_COMMAND, 1);
wdt_send_data(REBOOT_COMMAND, margin);
- spin_unlock(&wdt_lock);
+ mutex_unlock(&wdt_lock);
}
static void wdt_disable(void)
{
- spin_lock(&wdt_lock);
+ mutex_lock(&wdt_lock);
wdt_send_data(IFACE_ON_COMMAND, 0);
wdt_send_data(REBOOT_COMMAND, 0);
- spin_unlock(&wdt_lock);
+ mutex_unlock(&wdt_lock);
}
static int fitpc2_wdt_open(struct inode *inode, struct file *file)
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 5c5bc84..f8b86e9 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -238,6 +238,13 @@
return ERR_PTR(-ENOMEM);
}
+ rc = bdi_setup_and_register(&v9ses->bdi, "9p", BDI_CAP_MAP_COPY);
+ if (rc) {
+ __putname(v9ses->aname);
+ __putname(v9ses->uname);
+ return ERR_PTR(rc);
+ }
+
spin_lock(&v9fs_sessionlist_lock);
list_add(&v9ses->slist, &v9fs_sessionlist);
spin_unlock(&v9fs_sessionlist_lock);
@@ -301,6 +308,7 @@
return fid;
error:
+ bdi_destroy(&v9ses->bdi);
return ERR_PTR(retval);
}
@@ -326,6 +334,8 @@
__putname(v9ses->uname);
__putname(v9ses->aname);
+ bdi_destroy(&v9ses->bdi);
+
spin_lock(&v9fs_sessionlist_lock);
list_del(&v9ses->slist);
spin_unlock(&v9fs_sessionlist_lock);
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index a0a8d3d..bec4d0b 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -20,6 +20,7 @@
* Boston, MA 02111-1301 USA
*
*/
+#include <linux/backing-dev.h>
/**
* enum p9_session_flags - option flags for each 9P session
@@ -102,6 +103,7 @@
u32 uid; /* if ACCESS_SINGLE, the uid that has access */
struct p9_client *clnt; /* 9p client */
struct list_head slist; /* list of sessions registered with v9fs */
+ struct backing_dev_info bdi;
};
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 491108b..806da5d 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -77,6 +77,7 @@
sb->s_blocksize = 1 << sb->s_blocksize_bits;
sb->s_magic = V9FS_MAGIC;
sb->s_op = &v9fs_super_ops;
+ sb->s_bdi = &v9ses->bdi;
sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
MS_NOATIME;
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index c54dad4e60..a10f258 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -19,6 +19,7 @@
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/fscache.h>
+#include <linux/backing-dev.h>
#include "afs.h"
#include "afs_vl.h"
@@ -313,6 +314,7 @@
unsigned short rjservers; /* number of servers discarded due to -ENOMEDIUM */
struct afs_server *servers[8]; /* servers on which volume resides (ordered) */
struct rw_semaphore server_sem; /* lock for accessing current server */
+ struct backing_dev_info bdi;
};
/*
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 5e813a8..b3feddc 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -138,9 +138,9 @@
{
struct afs_super_info *super;
struct vfsmount *mnt;
- struct page *page = NULL;
+ struct page *page;
size_t size;
- char *buf, *devname = NULL, *options = NULL;
+ char *buf, *devname, *options;
int ret;
_enter("{%s}", mntpt->d_name.name);
@@ -150,22 +150,22 @@
ret = -EINVAL;
size = mntpt->d_inode->i_size;
if (size > PAGE_SIZE - 1)
- goto error;
+ goto error_no_devname;
ret = -ENOMEM;
devname = (char *) get_zeroed_page(GFP_KERNEL);
if (!devname)
- goto error;
+ goto error_no_devname;
options = (char *) get_zeroed_page(GFP_KERNEL);
if (!options)
- goto error;
+ goto error_no_options;
/* read the contents of the AFS special symlink */
page = read_mapping_page(mntpt->d_inode->i_mapping, 0, NULL);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
- goto error;
+ goto error_no_page;
}
ret = -EIO;
@@ -196,12 +196,12 @@
return mnt;
error:
- if (page)
- page_cache_release(page);
- if (devname)
- free_page((unsigned long) devname);
- if (options)
- free_page((unsigned long) options);
+ page_cache_release(page);
+error_no_page:
+ free_page((unsigned long) options);
+error_no_options:
+ free_page((unsigned long) devname);
+error_no_devname:
_leave(" = %d", ret);
return ERR_PTR(ret);
}
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 14f6431..e932e5a 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -311,6 +311,7 @@
sb->s_magic = AFS_FS_MAGIC;
sb->s_op = &afs_super_ops;
sb->s_fs_info = as;
+ sb->s_bdi = &as->volume->bdi;
/* allocate the root inode and dentry */
fid.vid = as->volume->vid;
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index a353e69..401eeb2 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -106,6 +106,10 @@
volume->cell = params->cell;
volume->vid = vlocation->vldb.vid[params->type];
+ ret = bdi_setup_and_register(&volume->bdi, "afs", BDI_CAP_MAP_COPY);
+ if (ret)
+ goto error_bdi;
+
init_rwsem(&volume->server_sem);
/* look up all the applicable server records */
@@ -151,6 +155,8 @@
return ERR_PTR(ret);
error_discard:
+ bdi_destroy(&volume->bdi);
+error_bdi:
up_write(¶ms->cell->vl_sem);
for (loop = volume->nservers - 1; loop >= 0; loop--)
@@ -200,6 +206,7 @@
for (loop = volume->nservers - 1; loop >= 0; loop--)
afs_put_server(volume->servers[loop]);
+ bdi_destroy(&volume->bdi);
kfree(volume);
_leave(" [destroyed]");
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 7ab23e0..2c5f9a0 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1005,15 +1005,8 @@
}
} else if (!mm->start_data) {
mm->start_data = seg->addr;
-#ifndef CONFIG_MMU
mm->end_data = seg->addr + phdr->p_memsz;
-#endif
}
-
-#ifdef CONFIG_MMU
- if (seg->addr + phdr->p_memsz > mm->end_data)
- mm->end_data = seg->addr + phdr->p_memsz;
-#endif
}
seg++;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index e0e769b..49566c1 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -355,7 +355,7 @@
if (!flat_reloc_valid(r, start_brk - start_data + text_len)) {
printk("BINFMT_FLAT: reloc outside program 0x%x (0 - 0x%x/0x%x)",
- (int) r,(int)(start_brk-start_code),(int)text_len);
+ (int) r,(int)(start_brk-start_data+text_len),(int)text_len);
goto failed;
}
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 2a6d019..6dcee88 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -406,16 +406,23 @@
int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync)
{
- struct block_device *bdev = I_BDEV(filp->f_mapping->host);
+ struct inode *bd_inode = filp->f_mapping->host;
+ struct block_device *bdev = I_BDEV(bd_inode);
int error;
- error = sync_blockdev(bdev);
- if (error)
- return error;
-
+ /*
+ * There is no need to serialise calls to blkdev_issue_flush with
+ * i_mutex and doing so causes performance issues with concurrent
+ * O_SYNC writers to a block device.
+ */
+ mutex_unlock(&bd_inode->i_mutex);
+
error = blkdev_issue_flush(bdev, NULL);
if (error == -EOPNOTSUPP)
error = 0;
+
+ mutex_lock(&bd_inode->i_mutex);
+
return error;
}
EXPORT_SYMBOL(blkdev_fsync);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index e7b8f2c..feca041 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -44,8 +44,6 @@
static void end_workqueue_fn(struct btrfs_work *work);
static void free_fs_root(struct btrfs_root *root);
-static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
-
/*
* end_io_wq structs are used to do processing in task context when an IO is
* complete. This is used during reads to verify checksums, and it is used
@@ -1375,19 +1373,11 @@
{
int err;
- bdi->name = "btrfs";
bdi->capabilities = BDI_CAP_MAP_COPY;
- err = bdi_init(bdi);
+ err = bdi_setup_and_register(bdi, "btrfs", BDI_CAP_MAP_COPY);
if (err)
return err;
- err = bdi_register(bdi, NULL, "btrfs-%d",
- atomic_inc_return(&btrfs_bdi_num));
- if (err) {
- bdi_destroy(bdi);
- return err;
- }
-
bdi->ra_pages = default_backing_dev_info.ra_pages;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
bdi->unplug_io_data = info;
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 4125937..4b42c2b 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -509,7 +509,7 @@
u64 bytes = 0;
struct ceph_client *client = ceph_inode_to_client(inode);
long writeback_stat;
- unsigned issued = __ceph_caps_issued(ci, NULL);
+ unsigned issued = ceph_caps_issued(ci);
/* parse reply */
replyhead = msg->front.iov_base;
diff --git a/fs/ceph/auth.c b/fs/ceph/auth.c
index f6394b9..818afe7 100644
--- a/fs/ceph/auth.c
+++ b/fs/ceph/auth.c
@@ -3,6 +3,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "types.h"
#include "auth_none.h"
diff --git a/fs/ceph/auth_none.h b/fs/ceph/auth_none.h
index 56c0553..8164df1 100644
--- a/fs/ceph/auth_none.h
+++ b/fs/ceph/auth_none.h
@@ -1,6 +1,8 @@
#ifndef _FS_CEPH_AUTH_NONE_H
#define _FS_CEPH_AUTH_NONE_H
+#include <linux/slab.h>
+
#include "auth.h"
/*
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index d9001a4..fee5a08d 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -12,8 +12,6 @@
#include "auth.h"
#include "decode.h"
-struct kmem_cache *ceph_x_ticketbuf_cachep;
-
#define TEMP_TICKET_BUF_LEN 256
static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed);
@@ -131,13 +129,12 @@
char *ticket_buf;
u8 struct_v;
- dbuf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, GFP_NOFS | GFP_ATOMIC);
+ dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
if (!dbuf)
return -ENOMEM;
ret = -ENOMEM;
- ticket_buf = kmem_cache_alloc(ceph_x_ticketbuf_cachep,
- GFP_NOFS | GFP_ATOMIC);
+ ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
if (!ticket_buf)
goto out_dbuf;
@@ -251,9 +248,9 @@
ret = 0;
out:
- kmem_cache_free(ceph_x_ticketbuf_cachep, ticket_buf);
+ kfree(ticket_buf);
out_dbuf:
- kmem_cache_free(ceph_x_ticketbuf_cachep, dbuf);
+ kfree(dbuf);
return ret;
bad:
@@ -605,8 +602,6 @@
remove_ticket_handler(ac, th);
}
- kmem_cache_destroy(ceph_x_ticketbuf_cachep);
-
kfree(ac->private);
ac->private = NULL;
}
@@ -641,26 +636,20 @@
int ret;
dout("ceph_x_init %p\n", ac);
+ ret = -ENOMEM;
xi = kzalloc(sizeof(*xi), GFP_NOFS);
if (!xi)
- return -ENOMEM;
+ goto out;
- ret = -ENOMEM;
- ceph_x_ticketbuf_cachep = kmem_cache_create("ceph_x_ticketbuf",
- TEMP_TICKET_BUF_LEN, 8,
- (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
- NULL);
- if (!ceph_x_ticketbuf_cachep)
- goto done_nomem;
ret = -EINVAL;
if (!ac->secret) {
pr_err("no secret set (for auth_x protocol)\n");
- goto done_nomem;
+ goto out_nomem;
}
ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
if (ret)
- goto done_nomem;
+ goto out_nomem;
xi->starting = true;
xi->ticket_handlers = RB_ROOT;
@@ -670,10 +659,9 @@
ac->ops = &ceph_x_ops;
return 0;
-done_nomem:
+out_nomem:
kfree(xi);
- if (ceph_x_ticketbuf_cachep)
- kmem_cache_destroy(ceph_x_ticketbuf_cachep);
+out:
return ret;
}
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index aa2239f..0c16818 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1861,8 +1861,8 @@
} else {
pr_err("%p auth cap %p not mds%d ???\n", inode,
cap, session->s_mds);
- spin_unlock(&inode->i_lock);
}
+ spin_unlock(&inode->i_lock);
}
}
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index ea8ee2e..650d2db 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -880,7 +880,16 @@
* do_request, above). If there is no trace, we need
* to do it here.
*/
+
+ /* d_move screws up d_subdirs order */
+ ceph_i_clear(new_dir, CEPH_I_COMPLETE);
+
d_move(old_dentry, new_dentry);
+
+ /* ensure target dentry is invalidated, despite
+ rehashing bug in vfs_rename_dir */
+ new_dentry->d_time = jiffies;
+ ceph_dentry(new_dentry)->lease_shared_gen = 0;
}
ceph_mdsc_put_request(req);
return err;
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 4add3d5..ed6f197 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -665,7 +665,8 @@
* throw out any page cache pages in this range. this
* may block.
*/
- truncate_inode_pages_range(inode->i_mapping, pos, pos+len);
+ truncate_inode_pages_range(inode->i_mapping, pos,
+ (pos+len) | (PAGE_CACHE_SIZE-1));
} else {
pages = alloc_page_vector(num_pages);
if (IS_ERR(pages)) {
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 26f883c..261f3e6 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -997,6 +997,10 @@
dn, dn->d_name.len, dn->d_name.name);
dout("fill_trace doing d_move %p -> %p\n",
req->r_old_dentry, dn);
+
+ /* d_move screws up d_subdirs order */
+ ceph_i_clear(dir, CEPH_I_COMPLETE);
+
d_move(req->r_old_dentry, dn);
dout(" src %p '%.*s' dst %p '%.*s'\n",
req->r_old_dentry,
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index cdaaa13..509f57d 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -1334,6 +1334,7 @@
unsigned front_len, middle_len, data_len, data_off;
int datacrc = con->msgr->nocrc;
int skip;
+ u64 seq;
dout("read_partial_message con %p msg %p\n", con, m);
@@ -1368,6 +1369,25 @@
return -EIO;
data_off = le16_to_cpu(con->in_hdr.data_off);
+ /* verify seq# */
+ seq = le64_to_cpu(con->in_hdr.seq);
+ if ((s64)seq - (s64)con->in_seq < 1) {
+ pr_info("skipping %s%lld %s seq %lld, expected %lld\n",
+ ENTITY_NAME(con->peer_name),
+ pr_addr(&con->peer_addr.in_addr),
+ seq, con->in_seq + 1);
+ con->in_base_pos = -front_len - middle_len - data_len -
+ sizeof(m->footer);
+ con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
+ return 0;
+ } else if ((s64)seq - (s64)con->in_seq > 1) {
+ pr_err("read_partial_message bad seq %lld expected %lld\n",
+ seq, con->in_seq + 1);
+ con->error_msg = "bad message sequence # for incoming message";
+ return -EBADMSG;
+ }
+
/* allocate message? */
if (!con->in_msg) {
dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
@@ -1379,6 +1399,7 @@
con->in_base_pos = -front_len - middle_len - data_len -
sizeof(m->footer);
con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
return 0;
}
if (IS_ERR(con->in_msg)) {
@@ -2030,6 +2051,7 @@
ceph_msg_put(con->in_msg);
con->in_msg = NULL;
con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
} else {
dout("con_revoke_pages %p msg %p pages %p no-op\n",
con, con->in_msg, msg);
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 2b88126..d5114db 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -869,16 +869,20 @@
continue;
ci = ceph_inode(inode);
spin_lock(&inode->i_lock);
- if (!ci->i_snap_realm)
- goto split_skip_inode;
- ceph_put_snap_realm(mdsc, ci->i_snap_realm);
- spin_lock(&realm->inodes_with_caps_lock);
- list_add(&ci->i_snap_realm_item,
- &realm->inodes_with_caps);
- ci->i_snap_realm = realm;
- spin_unlock(&realm->inodes_with_caps_lock);
- ceph_get_snap_realm(mdsc, realm);
-split_skip_inode:
+ if (list_empty(&ci->i_snap_realm_item)) {
+ struct ceph_snap_realm *oldrealm =
+ ci->i_snap_realm;
+
+ dout(" moving %p to split realm %llx %p\n",
+ inode, realm->ino, realm);
+ spin_lock(&realm->inodes_with_caps_lock);
+ list_add(&ci->i_snap_realm_item,
+ &realm->inodes_with_caps);
+ ci->i_snap_realm = realm;
+ spin_unlock(&realm->inodes_with_caps_lock);
+ ceph_get_snap_realm(mdsc, realm);
+ ceph_put_snap_realm(mdsc, oldrealm);
+ }
spin_unlock(&inode->i_lock);
iput(inode);
}
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 75d02ea..f888cf4 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -996,9 +996,10 @@
if (ret)
goto out_icache;
- pr_info("loaded %d.%d.%d (mon/mds/osd proto %d/%d/%d)\n",
- CEPH_VERSION_MAJOR, CEPH_VERSION_MINOR, CEPH_VERSION_PATCH,
- CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL);
+ pr_info("loaded (mon/mds/osd proto %d/%d/%d, osdmap %d/%d %d/%d)\n",
+ CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL,
+ CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT,
+ CEPH_OSDMAP_INC_VERSION, CEPH_OSDMAP_INC_VERSION_EXT);
return 0;
out_icache:
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index e30dfbb..13513b8 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -10,6 +10,7 @@
#include <linux/fs.h>
#include <linux/mempool.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/writeback.h>
#include <linux/slab.h>
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 4797787..246a167 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -18,6 +18,8 @@
#ifndef _CIFS_FS_SB_H
#define _CIFS_FS_SB_H
+#include <linux/backing-dev.h>
+
#define CIFS_MOUNT_NO_PERM 1 /* do not do client vfs_perm check */
#define CIFS_MOUNT_SET_UID 2 /* set current's euid in create etc. */
#define CIFS_MOUNT_SERVER_INUM 4 /* inode numbers from uniqueid from server */
@@ -50,5 +52,6 @@
#ifdef CONFIG_CIFS_DFS_UPCALL
char *mountdata; /* mount options received at mount time */
#endif
+ struct backing_dev_info bdi;
};
#endif /* _CIFS_FS_SB_H */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index ded66be..ad235d6 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -103,6 +103,12 @@
if (cifs_sb == NULL)
return -ENOMEM;
+ rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
+ if (rc) {
+ kfree(cifs_sb);
+ return rc;
+ }
+
#ifdef CONFIG_CIFS_DFS_UPCALL
/* copy mount params to sb for use in submounts */
/* BB: should we move this after the mount so we
@@ -115,6 +121,7 @@
int len = strlen(data);
cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
if (cifs_sb->mountdata == NULL) {
+ bdi_destroy(&cifs_sb->bdi);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
return -ENOMEM;
@@ -135,6 +142,7 @@
sb->s_magic = CIFS_MAGIC_NUMBER;
sb->s_op = &cifs_super_ops;
+ sb->s_bdi = &cifs_sb->bdi;
/* if (cifs_sb->tcon->ses->server->maxBuf > MAX_CIFS_HDR_SIZE + 512)
sb->s_blocksize =
cifs_sb->tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE; */
@@ -183,6 +191,7 @@
}
#endif
unload_nls(cifs_sb->local_nls);
+ bdi_destroy(&cifs_sb->bdi);
kfree(cifs_sb);
}
return rc;
@@ -214,6 +223,7 @@
#endif
unload_nls(cifs_sb->local_nls);
+ bdi_destroy(&cifs_sb->bdi);
kfree(cifs_sb);
unlock_kernel();
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index a1695dc..d97f993 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -167,6 +167,10 @@
return -EBUSY;
}
+ error = bdi_setup_and_register(&vc->bdi, "coda", BDI_CAP_MAP_COPY);
+ if (error)
+ goto bdi_err;
+
vc->vc_sb = sb;
sb->s_fs_info = vc;
@@ -175,6 +179,7 @@
sb->s_blocksize_bits = 12;
sb->s_magic = CODA_SUPER_MAGIC;
sb->s_op = &coda_super_operations;
+ sb->s_bdi = &vc->bdi;
/* get root fid from Venus: this needs the root inode */
error = venus_rootfid(sb, &fid);
@@ -200,6 +205,8 @@
return 0;
error:
+ bdi_destroy(&vc->bdi);
+ bdi_err:
if (root)
iput(root);
if (vc)
@@ -210,6 +217,7 @@
static void coda_put_super(struct super_block *sb)
{
+ bdi_destroy(&coda_vcp(sb)->bdi);
coda_vcp(sb)->vc_sb = NULL;
sb->s_fs_info = NULL;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index c32a1b6..641640d 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -102,7 +102,6 @@
#include <linux/nbd.h>
#include <linux/random.h>
#include <linux/filter.h>
-#include <linux/pktcdvd.h>
#include <linux/hiddev.h>
@@ -1126,8 +1125,6 @@
COMPATIBLE_IOCTL(PPGETPHASE)
COMPATIBLE_IOCTL(PPGETFLAGS)
COMPATIBLE_IOCTL(PPSETFLAGS)
-/* pktcdvd */
-COMPATIBLE_IOCTL(PACKET_CTRL_CMD)
/* Big A */
/* sparc only */
/* Big Q for sound/OSS */
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index bc71154..bfc2e0f 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -35,6 +35,7 @@
#include <linux/scatterlist.h>
#include <linux/hash.h>
#include <linux/nsproxy.h>
+#include <linux/backing-dev.h>
/* Version verification for shared data structures w/ userspace */
#define ECRYPTFS_VERSION_MAJOR 0x00
@@ -393,6 +394,7 @@
struct ecryptfs_sb_info {
struct super_block *wsi_sb;
struct ecryptfs_mount_crypt_stat mount_crypt_stat;
+ struct backing_dev_info bdi;
};
/* file private data. */
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index af1a8f0..760983d 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -497,17 +497,25 @@
static int
ecryptfs_fill_super(struct super_block *sb, void *raw_data, int silent)
{
+ struct ecryptfs_sb_info *esi;
int rc = 0;
/* Released in ecryptfs_put_super() */
ecryptfs_set_superblock_private(sb,
kmem_cache_zalloc(ecryptfs_sb_info_cache,
GFP_KERNEL));
- if (!ecryptfs_superblock_to_private(sb)) {
+ esi = ecryptfs_superblock_to_private(sb);
+ if (!esi) {
ecryptfs_printk(KERN_WARNING, "Out of memory\n");
rc = -ENOMEM;
goto out;
}
+
+ rc = bdi_setup_and_register(&esi->bdi, "ecryptfs", BDI_CAP_MAP_COPY);
+ if (rc)
+ goto out;
+
+ sb->s_bdi = &esi->bdi;
sb->s_op = &ecryptfs_sops;
/* Released through deactivate_super(sb) from get_sb_nodev */
sb->s_root = d_alloc(NULL, &(const struct qstr) {
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 278743c..0c0ae49 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -122,6 +122,7 @@
lock_kernel();
ecryptfs_destroy_mount_crypt_stat(&sb_info->mount_crypt_stat);
+ bdi_destroy(&sb_info->bdi);
kmem_cache_free(ecryptfs_sb_info_cache, sb_info);
ecryptfs_set_superblock_private(sb, NULL);
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 8442e35..22721b2 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -35,6 +35,7 @@
#include <linux/fs.h>
#include <linux/time.h>
+#include <linux/backing-dev.h>
#include "common.h"
/* FIXME: Remove once pnfs hits mainline
@@ -84,6 +85,7 @@
u32 s_next_generation; /* next gen # to use */
atomic_t s_curr_pending; /* number of pending commands */
uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */
+ struct backing_dev_info bdi; /* register our bdi with VFS */
struct pnfs_osd_data_map data_map; /* Default raid to use
* FIXME: Needed ?
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 18e57ea..03149b9a 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -302,6 +302,7 @@
_exofs_print_device("Unmounting", NULL, sbi->layout.s_ods[0],
sbi->layout.s_pid);
+ bdi_destroy(&sbi->bdi);
exofs_free_sbi(sbi);
sb->s_fs_info = NULL;
}
@@ -546,6 +547,10 @@
if (!sbi)
return -ENOMEM;
+ ret = bdi_setup_and_register(&sbi->bdi, "exofs", BDI_CAP_MAP_COPY);
+ if (ret)
+ goto free_bdi;
+
/* use mount options to fill superblock */
od = osduld_path_lookup(opts->dev_name);
if (IS_ERR(od)) {
@@ -612,6 +617,7 @@
}
/* set up operation vectors */
+ sb->s_bdi = &sbi->bdi;
sb->s_fs_info = sbi;
sb->s_op = &exofs_sops;
sb->s_export_op = &exofs_export_ops;
@@ -643,6 +649,8 @@
return 0;
free_sbi:
+ bdi_destroy(&sbi->bdi);
+free_bdi:
EXOFS_ERR("Unable to mount exofs on %s pid=0x%llx err=%d\n",
opts->dev_name, sbi->layout.s_pid, ret);
exofs_free_sbi(sbi);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 94c8ee8..236b834 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3879,6 +3879,7 @@
physical += offset;
length = EXT4_SB(inode->i_sb)->s_inode_size - offset;
flags |= FIEMAP_EXTENT_DATA_INLINE;
+ brelse(iloc.bh);
} else { /* external block */
physical = EXT4_I(inode)->i_file_acl << blockbits;
length = inode->i_sb->s_blocksize;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 5381802..81d6054 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5375,7 +5375,7 @@
} else {
struct ext4_iloc iloc;
- err = ext4_get_inode_loc(inode, &iloc);
+ err = __ext4_get_inode_loc(inode, &iloc, 0);
if (err)
return err;
if (wbc->sync_mode == WB_SYNC_ALL)
@@ -5386,6 +5386,7 @@
(unsigned long long)iloc.bh->b_blocknr);
err = -EIO;
}
+ brelse(iloc.bh);
}
return err;
}
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index bde9d0b..b423a36 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2535,6 +2535,17 @@
mb_debug(1, "gonna free %u blocks in group %u (0x%p):",
entry->count, entry->group, entry);
+ if (test_opt(sb, DISCARD)) {
+ ext4_fsblk_t discard_block;
+
+ discard_block = entry->start_blk +
+ ext4_group_first_block_no(sb, entry->group);
+ trace_ext4_discard_blocks(sb,
+ (unsigned long long)discard_block,
+ entry->count);
+ sb_issue_discard(sb, discard_block, entry->count);
+ }
+
err = ext4_mb_load_buddy(sb, entry->group, &e4b);
/* we expect to find existing buddy because it's pinned */
BUG_ON(err != 0);
@@ -2556,16 +2567,6 @@
page_cache_release(e4b.bd_bitmap_page);
}
ext4_unlock_group(sb, entry->group);
- if (test_opt(sb, DISCARD)) {
- ext4_fsblk_t discard_block;
-
- discard_block = entry->start_blk +
- ext4_group_first_block_no(sb, entry->group);
- trace_ext4_discard_blocks(sb,
- (unsigned long long)discard_block,
- entry->count);
- sb_issue_discard(sb, discard_block, entry->count);
- }
kmem_cache_free(ext4_free_ext_cachep, entry);
ext4_mb_release_desc(&e4b);
}
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 6c75110..7faefb4 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -228,14 +228,23 @@
#ifdef CONFIG_BLOCK
-#define blk_to_logical(inode, blk) (blk << (inode)->i_blkbits)
-#define logical_to_blk(inode, offset) (offset >> (inode)->i_blkbits);
+static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
+{
+ return (offset >> inode->i_blkbits);
+}
+
+static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
+{
+ return (blk << inode->i_blkbits);
+}
/**
* __generic_block_fiemap - FIEMAP for block based inodes (no locking)
- * @inode - the inode to map
- * @arg - the pointer to userspace where we copy everything to
- * @get_block - the fs's get_block function
+ * @inode: the inode to map
+ * @fieinfo: the fiemap info struct that will be passed back to userspace
+ * @start: where to start mapping in the inode
+ * @len: how much space to map
+ * @get_block: the fs's get_block function
*
* This does FIEMAP for block based inodes. Basically it will just loop
* through get_block until we hit the number of extents we want to map, or we
@@ -250,58 +259,63 @@
*/
int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block)
+ struct fiemap_extent_info *fieinfo, loff_t start,
+ loff_t len, get_block_t *get_block)
{
- struct buffer_head tmp;
- unsigned long long start_blk;
- long long length = 0, map_len = 0;
+ struct buffer_head map_bh;
+ sector_t start_blk, last_blk;
+ loff_t isize = i_size_read(inode);
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0, past_eof = 0, whole_file = 0;
+ bool past_eof = false, whole_file = false;
+ int ret = 0;
- if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
+ ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
+ if (ret)
return ret;
+ /*
+ * Either the i_mutex or other appropriate locking needs to be held
+ * since we expect isize to not change at all through the duration of
+ * this call.
+ */
+ if (len >= isize) {
+ whole_file = true;
+ len = isize;
+ }
+
start_blk = logical_to_blk(inode, start);
-
- length = (long long)min_t(u64, len, i_size_read(inode));
- if (length < len)
- whole_file = 1;
-
- map_len = length;
+ last_blk = logical_to_blk(inode, start + len - 1);
do {
/*
* we set b_size to the total size we want so it will map as
* many contiguous blocks as possible at once
*/
- memset(&tmp, 0, sizeof(struct buffer_head));
- tmp.b_size = map_len;
+ memset(&map_bh, 0, sizeof(struct buffer_head));
+ map_bh.b_size = len;
- ret = get_block(inode, start_blk, &tmp, 0);
+ ret = get_block(inode, start_blk, &map_bh, 0);
if (ret)
break;
/* HOLE */
- if (!buffer_mapped(&tmp)) {
- length -= blk_to_logical(inode, 1);
+ if (!buffer_mapped(&map_bh)) {
start_blk++;
/*
- * we want to handle the case where there is an
+ * We want to handle the case where there is an
* allocated block at the front of the file, and then
* nothing but holes up to the end of the file properly,
* to make sure that extent at the front gets properly
* marked with FIEMAP_EXTENT_LAST
*/
if (!past_eof &&
- blk_to_logical(inode, start_blk) >=
- blk_to_logical(inode, 0)+i_size_read(inode))
+ blk_to_logical(inode, start_blk) >= isize)
past_eof = 1;
/*
- * first hole after going past the EOF, this is our
+ * First hole after going past the EOF, this is our
* last extent
*/
if (past_eof && size) {
@@ -309,15 +323,18 @@
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
- break;
+ } else if (size) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size, flags);
+ size = 0;
}
/* if we have holes up to/past EOF then we're done */
- if (length <= 0 || past_eof)
+ if (start_blk > last_blk || past_eof || ret)
break;
} else {
/*
- * we have gone over the length of what we wanted to
+ * We have gone over the length of what we wanted to
* map, and it wasn't the entire file, so add the extent
* we got last time and exit.
*
@@ -331,7 +348,7 @@
* are good to go, just add the extent to the fieinfo
* and break
*/
- if (length <= 0 && !whole_file) {
+ if (start_blk > last_blk && !whole_file) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
@@ -351,11 +368,10 @@
}
logical = blk_to_logical(inode, start_blk);
- phys = blk_to_logical(inode, tmp.b_blocknr);
- size = tmp.b_size;
+ phys = blk_to_logical(inode, map_bh.b_blocknr);
+ size = map_bh.b_size;
flags = FIEMAP_EXTENT_MERGED;
- length -= tmp.b_size;
start_blk += logical_to_blk(inode, size);
/*
@@ -363,15 +379,13 @@
* soon as we find a hole that the last extent we found
* is marked with FIEMAP_EXTENT_LAST
*/
- if (!past_eof &&
- logical+size >=
- blk_to_logical(inode, 0)+i_size_read(inode))
- past_eof = 1;
+ if (!past_eof && logical + size >= isize)
+ past_eof = true;
}
cond_resched();
} while (1);
- /* if ret is 1 then we just hit the end of the extent array */
+ /* If ret is 1 then we just hit the end of the extent array */
if (ret == 1)
ret = 0;
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 9dd1262..ed9ba6f 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -61,7 +61,7 @@
inode->i_op = &page_symlink_inode_operations;
inode->i_mapping->a_ops = &jfs_aops;
} else {
- inode->i_op = &jfs_symlink_inode_operations;
+ inode->i_op = &jfs_fast_symlink_inode_operations;
/*
* The inline data should be null-terminated, but
* don't let on-disk corruption crash the kernel
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 6c4dfcbf..9e2f6a7 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -196,7 +196,7 @@
bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
bmp->db_aglevel = le32_to_cpu(dbmp_le->dn_aglevel);
- bmp->db_agheigth = le32_to_cpu(dbmp_le->dn_agheigth);
+ bmp->db_agheight = le32_to_cpu(dbmp_le->dn_agheight);
bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
bmp->db_agstart = le32_to_cpu(dbmp_le->dn_agstart);
bmp->db_agl2size = le32_to_cpu(dbmp_le->dn_agl2size);
@@ -288,7 +288,7 @@
dbmp_le->dn_maxag = cpu_to_le32(bmp->db_maxag);
dbmp_le->dn_agpref = cpu_to_le32(bmp->db_agpref);
dbmp_le->dn_aglevel = cpu_to_le32(bmp->db_aglevel);
- dbmp_le->dn_agheigth = cpu_to_le32(bmp->db_agheigth);
+ dbmp_le->dn_agheight = cpu_to_le32(bmp->db_agheight);
dbmp_le->dn_agwidth = cpu_to_le32(bmp->db_agwidth);
dbmp_le->dn_agstart = cpu_to_le32(bmp->db_agstart);
dbmp_le->dn_agl2size = cpu_to_le32(bmp->db_agl2size);
@@ -1441,7 +1441,7 @@
* tree index of this allocation group within the control page.
*/
agperlev =
- (1 << (L2LPERCTL - (bmp->db_agheigth << 1))) / bmp->db_agwidth;
+ (1 << (L2LPERCTL - (bmp->db_agheight << 1))) / bmp->db_agwidth;
ti = bmp->db_agstart + bmp->db_agwidth * (agno & (agperlev - 1));
/* dmap control page trees fan-out by 4 and a single allocation
@@ -1460,7 +1460,7 @@
* the subtree to find the leftmost leaf that describes this
* free space.
*/
- for (k = bmp->db_agheigth; k > 0; k--) {
+ for (k = bmp->db_agheight; k > 0; k--) {
for (n = 0, m = (ti << 2) + 1; n < 4; n++) {
if (l2nb <= dcp->stree[m + n]) {
ti = m + n;
@@ -3607,7 +3607,7 @@
}
/*
- * compute db_aglevel, db_agheigth, db_width, db_agstart:
+ * compute db_aglevel, db_agheight, db_width, db_agstart:
* an ag is covered in aglevel dmapctl summary tree,
* at agheight level height (from leaf) with agwidth number of nodes
* each, which starts at agstart index node of the smmary tree node
@@ -3616,9 +3616,9 @@
bmp->db_aglevel = BMAPSZTOLEV(bmp->db_agsize);
l2nl =
bmp->db_agl2size - (L2BPERDMAP + bmp->db_aglevel * L2LPERCTL);
- bmp->db_agheigth = l2nl >> 1;
- bmp->db_agwidth = 1 << (l2nl - (bmp->db_agheigth << 1));
- for (i = 5 - bmp->db_agheigth, bmp->db_agstart = 0, n = 1; i > 0;
+ bmp->db_agheight = l2nl >> 1;
+ bmp->db_agwidth = 1 << (l2nl - (bmp->db_agheight << 1));
+ for (i = 5 - bmp->db_agheight, bmp->db_agstart = 0, n = 1; i > 0;
i--) {
bmp->db_agstart += n;
n <<= 2;
diff --git a/fs/jfs/jfs_dmap.h b/fs/jfs/jfs_dmap.h
index 1a6eb41..6dcb906 100644
--- a/fs/jfs/jfs_dmap.h
+++ b/fs/jfs/jfs_dmap.h
@@ -210,7 +210,7 @@
__le32 dn_maxag; /* 4: max active alloc group number */
__le32 dn_agpref; /* 4: preferred alloc group (hint) */
__le32 dn_aglevel; /* 4: dmapctl level holding the AG */
- __le32 dn_agheigth; /* 4: height in dmapctl of the AG */
+ __le32 dn_agheight; /* 4: height in dmapctl of the AG */
__le32 dn_agwidth; /* 4: width in dmapctl of the AG */
__le32 dn_agstart; /* 4: start tree index at AG height */
__le32 dn_agl2size; /* 4: l2 num of blks per alloc group */
@@ -229,7 +229,7 @@
int dn_maxag; /* max active alloc group number */
int dn_agpref; /* preferred alloc group (hint) */
int dn_aglevel; /* dmapctl level holding the AG */
- int dn_agheigth; /* height in dmapctl of the AG */
+ int dn_agheight; /* height in dmapctl of the AG */
int dn_agwidth; /* width in dmapctl of the AG */
int dn_agstart; /* start tree index at AG height */
int dn_agl2size; /* l2 num of blks per alloc group */
@@ -255,7 +255,7 @@
#define db_agsize db_bmap.dn_agsize
#define db_agl2size db_bmap.dn_agl2size
#define db_agwidth db_bmap.dn_agwidth
-#define db_agheigth db_bmap.dn_agheigth
+#define db_agheight db_bmap.dn_agheight
#define db_agstart db_bmap.dn_agstart
#define db_numag db_bmap.dn_numag
#define db_maxlevel db_bmap.dn_maxlevel
diff --git a/fs/jfs/jfs_inode.h b/fs/jfs/jfs_inode.h
index 79e2c79..9e6bda3 100644
--- a/fs/jfs/jfs_inode.h
+++ b/fs/jfs/jfs_inode.h
@@ -48,5 +48,6 @@
extern const struct inode_operations jfs_file_inode_operations;
extern const struct file_operations jfs_file_operations;
extern const struct inode_operations jfs_symlink_inode_operations;
+extern const struct inode_operations jfs_fast_symlink_inode_operations;
extern const struct dentry_operations jfs_ci_dentry_operations;
#endif /* _H_JFS_INODE */
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 4a3e9f3..a9cf8e8 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -956,7 +956,7 @@
*/
if (ssize <= IDATASIZE) {
- ip->i_op = &jfs_symlink_inode_operations;
+ ip->i_op = &jfs_fast_symlink_inode_operations;
i_fastsymlink = JFS_IP(ip)->i_inline;
memcpy(i_fastsymlink, name, ssize);
@@ -978,7 +978,7 @@
else {
jfs_info("jfs_symlink: allocate extent ip:0x%p", ip);
- ip->i_op = &page_symlink_inode_operations;
+ ip->i_op = &jfs_symlink_inode_operations;
ip->i_mapping->a_ops = &jfs_aops;
/*
diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c
index 7f24a0b..1aba003 100644
--- a/fs/jfs/resize.c
+++ b/fs/jfs/resize.c
@@ -81,6 +81,7 @@
struct inode *iplist[1];
struct jfs_superblock *j_sb, *j_sb2;
uint old_agsize;
+ int agsizechanged = 0;
struct buffer_head *bh, *bh2;
/* If the volume hasn't grown, get out now */
@@ -333,6 +334,9 @@
*/
if ((rc = dbExtendFS(ipbmap, XAddress, nblocks)))
goto error_out;
+
+ agsizechanged |= (bmp->db_agsize != old_agsize);
+
/*
* the map now has extended to cover additional nblocks:
* dn_mapsize = oldMapsize + nblocks;
@@ -432,7 +436,7 @@
* will correctly identify the new ag);
*/
/* if new AG size the same as old AG size, done! */
- if (bmp->db_agsize != old_agsize) {
+ if (agsizechanged) {
if ((rc = diExtendFS(ipimap, ipbmap)))
goto error_out;
diff --git a/fs/jfs/symlink.c b/fs/jfs/symlink.c
index 4af1a05..205b946 100644
--- a/fs/jfs/symlink.c
+++ b/fs/jfs/symlink.c
@@ -29,9 +29,21 @@
return NULL;
}
-const struct inode_operations jfs_symlink_inode_operations = {
+const struct inode_operations jfs_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = jfs_follow_link,
+ .setattr = jfs_setattr,
+ .setxattr = jfs_setxattr,
+ .getxattr = jfs_getxattr,
+ .listxattr = jfs_listxattr,
+ .removexattr = jfs_removexattr,
+};
+
+const struct inode_operations jfs_symlink_inode_operations = {
+ .readlink = generic_readlink,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
+ .setattr = jfs_setattr,
.setxattr = jfs_setxattr,
.getxattr = jfs_getxattr,
.listxattr = jfs_listxattr,
diff --git a/fs/logfs/gc.c b/fs/logfs/gc.c
index 84e36f5..76c242f 100644
--- a/fs/logfs/gc.c
+++ b/fs/logfs/gc.c
@@ -459,6 +459,14 @@
struct logfs_block *block;
int round, progress, last_progress = 0;
+ /*
+ * Doing too many changes to the segfile at once would result
+ * in a large number of aliases. Write the journal before
+ * things get out of hand.
+ */
+ if (super->s_shadow_tree.no_shadowed_segments >= MAX_OBJ_ALIASES)
+ logfs_write_anchor(sb);
+
if (no_free_segments(sb) >= target &&
super->s_no_object_aliases < MAX_OBJ_ALIASES)
return;
diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c
index 33bd260..fb0a613 100644
--- a/fs/logfs/journal.c
+++ b/fs/logfs/journal.c
@@ -389,7 +389,10 @@
static int journal_erase_segment(struct logfs_area *area)
{
struct super_block *sb = area->a_sb;
- struct logfs_segment_header sh;
+ union {
+ struct logfs_segment_header sh;
+ unsigned char c[ALIGN(sizeof(struct logfs_segment_header), 16)];
+ } u;
u64 ofs;
int err;
@@ -397,20 +400,21 @@
if (err)
return err;
- sh.pad = 0;
- sh.type = SEG_JOURNAL;
- sh.level = 0;
- sh.segno = cpu_to_be32(area->a_segno);
- sh.ec = cpu_to_be32(area->a_erase_count);
- sh.gec = cpu_to_be64(logfs_super(sb)->s_gec);
- sh.crc = logfs_crc32(&sh, sizeof(sh), 4);
+ memset(&u, 0, sizeof(u));
+ u.sh.pad = 0;
+ u.sh.type = SEG_JOURNAL;
+ u.sh.level = 0;
+ u.sh.segno = cpu_to_be32(area->a_segno);
+ u.sh.ec = cpu_to_be32(area->a_erase_count);
+ u.sh.gec = cpu_to_be64(logfs_super(sb)->s_gec);
+ u.sh.crc = logfs_crc32(&u.sh, sizeof(u.sh), 4);
/* This causes a bug in segment.c. Not yet. */
//logfs_set_segment_erased(sb, area->a_segno, area->a_erase_count, 0);
ofs = dev_ofs(sb, area->a_segno, 0);
- area->a_used_bytes = ALIGN(sizeof(sh), 16);
- logfs_buf_write(area, ofs, &sh, sizeof(sh));
+ area->a_used_bytes = sizeof(u);
+ logfs_buf_write(area, ofs, &u, sizeof(u));
return 0;
}
@@ -494,6 +498,8 @@
btree_grim_visitor64(&tree->new, (unsigned long)sb, account_shadow);
btree_grim_visitor64(&tree->old, (unsigned long)sb, account_shadow);
+ btree_grim_visitor32(&tree->segment_map, 0, NULL);
+ tree->no_shadowed_segments = 0;
if (li->li_block) {
/*
@@ -607,9 +613,9 @@
if (len == 0)
return logfs_write_header(super, header, 0, type);
+ BUG_ON(len > sb->s_blocksize);
compr_len = logfs_compress(buf, data, len, sb->s_blocksize);
if (compr_len < 0 || type == JE_ANCHOR) {
- BUG_ON(len > sb->s_blocksize);
memcpy(data, buf, len);
compr_len = len;
compr = COMPR_NONE;
@@ -661,6 +667,7 @@
if (ofs < 0)
return ofs;
logfs_buf_write(area, ofs, super->s_compressed_je, len);
+ BUG_ON(super->s_no_je >= MAX_JOURNAL_ENTRIES);
super->s_je_array[super->s_no_je++] = cpu_to_be64(ofs);
return 0;
}
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index b84b0ee..0a3df1a 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -257,10 +257,14 @@
* struct shadow_tree
* @new: shadows where old_ofs==0, indexed by new_ofs
* @old: shadows where old_ofs!=0, indexed by old_ofs
+ * @segment_map: bitfield of segments containing shadows
+ * @no_shadowed_segment: number of segments containing shadows
*/
struct shadow_tree {
struct btree_head64 new;
struct btree_head64 old;
+ struct btree_head32 segment_map;
+ int no_shadowed_segments;
};
struct object_alias_item {
@@ -305,13 +309,14 @@
level_t level, int child_no, __be64 val);
struct logfs_block_ops {
void (*write_block)(struct logfs_block *block);
- gc_level_t (*block_level)(struct logfs_block *block);
void (*free_block)(struct super_block *sb, struct logfs_block*block);
int (*write_alias)(struct super_block *sb,
struct logfs_block *block,
write_alias_t *write_one_alias);
};
+#define MAX_JOURNAL_ENTRIES 256
+
struct logfs_super {
struct mtd_info *s_mtd; /* underlying device */
struct block_device *s_bdev; /* underlying device */
@@ -378,7 +383,7 @@
u32 s_journal_ec[LOGFS_JOURNAL_SEGS]; /* journal erasecounts */
u64 s_last_version;
struct logfs_area *s_journal_area; /* open journal segment */
- __be64 s_je_array[64];
+ __be64 s_je_array[MAX_JOURNAL_ENTRIES];
int s_no_je;
int s_sum_index; /* for the 12 summaries */
@@ -722,4 +727,10 @@
return logfs_super(sb)->s_area[(__force u8)gc_level];
}
+static inline void logfs_mempool_destroy(mempool_t *pool)
+{
+ if (pool)
+ mempool_destroy(pool);
+}
+
#endif
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index bff4025..3159db6 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -430,25 +430,6 @@
}
}
-static gc_level_t inode_block_level(struct logfs_block *block)
-{
- BUG_ON(block->inode->i_ino == LOGFS_INO_MASTER);
- return GC_LEVEL(LOGFS_MAX_LEVELS);
-}
-
-static gc_level_t indirect_block_level(struct logfs_block *block)
-{
- struct page *page;
- struct inode *inode;
- u64 bix;
- level_t level;
-
- page = block->page;
- inode = page->mapping->host;
- logfs_unpack_index(page->index, &bix, &level);
- return expand_level(inode->i_ino, level);
-}
-
/*
* This silences a false, yet annoying gcc warning. I hate it when my editor
* jumps into bitops.h each time I recompile this file.
@@ -587,14 +568,12 @@
static struct logfs_block_ops inode_block_ops = {
.write_block = inode_write_block,
- .block_level = inode_block_level,
.free_block = inode_free_block,
.write_alias = inode_write_alias,
};
struct logfs_block_ops indirect_block_ops = {
.write_block = indirect_write_block,
- .block_level = indirect_block_level,
.free_block = indirect_free_block,
.write_alias = indirect_write_alias,
};
@@ -1241,6 +1220,18 @@
mempool_free(shadow, super->s_shadow_pool);
}
+static void mark_segment(struct shadow_tree *tree, u32 segno)
+{
+ int err;
+
+ if (!btree_lookup32(&tree->segment_map, segno)) {
+ err = btree_insert32(&tree->segment_map, segno, (void *)1,
+ GFP_NOFS);
+ BUG_ON(err);
+ tree->no_shadowed_segments++;
+ }
+}
+
/**
* fill_shadow_tree - Propagate shadow tree changes due to a write
* @inode: Inode owning the page
@@ -1288,6 +1279,8 @@
super->s_dirty_used_bytes += shadow->new_len;
super->s_dirty_free_bytes += shadow->old_len;
+ mark_segment(tree, shadow->old_ofs >> super->s_segshift);
+ mark_segment(tree, shadow->new_ofs >> super->s_segshift);
}
}
@@ -1845,19 +1838,37 @@
return logfs_truncate_direct(inode, size);
}
-int logfs_truncate(struct inode *inode, u64 size)
+/*
+ * Truncate, by changing the segment file, can consume a fair amount
+ * of resources. So back off from time to time and do some GC.
+ * 8 or 2048 blocks should be well within safety limits even if
+ * every single block resided in a different segment.
+ */
+#define TRUNCATE_STEP (8 * 1024 * 1024)
+int logfs_truncate(struct inode *inode, u64 target)
{
struct super_block *sb = inode->i_sb;
- int err;
+ u64 size = i_size_read(inode);
+ int err = 0;
- logfs_get_wblocks(sb, NULL, 1);
- err = __logfs_truncate(inode, size);
- if (!err)
- err = __logfs_write_inode(inode, 0);
- logfs_put_wblocks(sb, NULL, 1);
+ size = ALIGN(size, TRUNCATE_STEP);
+ while (size > target) {
+ if (size > TRUNCATE_STEP)
+ size -= TRUNCATE_STEP;
+ else
+ size = 0;
+ if (size < target)
+ size = target;
+
+ logfs_get_wblocks(sb, NULL, 1);
+ err = __logfs_truncate(inode, target);
+ if (!err)
+ err = __logfs_write_inode(inode, 0);
+ logfs_put_wblocks(sb, NULL, 1);
+ }
if (!err)
- err = vmtruncate(inode, size);
+ err = vmtruncate(inode, target);
/* I don't trust error recovery yet. */
WARN_ON(err);
@@ -2251,8 +2262,6 @@
struct logfs_super *super = logfs_super(sb);
destroy_meta_inode(super->s_segfile_inode);
- if (super->s_block_pool)
- mempool_destroy(super->s_block_pool);
- if (super->s_shadow_pool)
- mempool_destroy(super->s_shadow_pool);
+ logfs_mempool_destroy(super->s_block_pool);
+ logfs_mempool_destroy(super->s_shadow_pool);
}
diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c
index 801a3a1..f77ce2b 100644
--- a/fs/logfs/segment.c
+++ b/fs/logfs/segment.c
@@ -183,14 +183,8 @@
return 0;
}
-static gc_level_t btree_block_level(struct logfs_block *block)
-{
- return expand_level(block->ino, block->level);
-}
-
static struct logfs_block_ops btree_block_ops = {
.write_block = btree_write_block,
- .block_level = btree_block_level,
.free_block = __free_block,
.write_alias = btree_write_alias,
};
@@ -919,7 +913,7 @@
for (i--; i >= 0; i--)
free_area(super->s_area[i]);
free_area(super->s_journal_area);
- mempool_destroy(super->s_alias_pool);
+ logfs_mempool_destroy(super->s_alias_pool);
return -ENOMEM;
}
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index b60bfac..5866ee6 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -12,6 +12,7 @@
#include "logfs.h"
#include <linux/bio.h>
#include <linux/slab.h>
+#include <linux/blkdev.h>
#include <linux/mtd/mtd.h>
#include <linux/statfs.h>
#include <linux/buffer_head.h>
@@ -137,6 +138,10 @@
sb->s_fs_info = super;
sb->s_mtd = super->s_mtd;
sb->s_bdev = super->s_bdev;
+ if (sb->s_bdev)
+ sb->s_bdi = &bdev_get_queue(sb->s_bdev)->backing_dev_info;
+ if (sb->s_mtd)
+ sb->s_bdi = sb->s_mtd->backing_dev_info;
return 0;
}
@@ -452,6 +457,8 @@
btree_init_mempool64(&super->s_shadow_tree.new, super->s_btree_pool);
btree_init_mempool64(&super->s_shadow_tree.old, super->s_btree_pool);
+ btree_init_mempool32(&super->s_shadow_tree.segment_map,
+ super->s_btree_pool);
ret = logfs_init_mapping(sb);
if (ret)
@@ -516,8 +523,8 @@
if (super->s_erase_page)
__free_page(super->s_erase_page);
super->s_devops->put_device(sb);
- mempool_destroy(super->s_btree_pool);
- mempool_destroy(super->s_alias_pool);
+ logfs_mempool_destroy(super->s_btree_pool);
+ logfs_mempool_destroy(super->s_alias_pool);
kfree(super);
log_super("LogFS: Finished unmounting\n");
}
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index cf98da1..fa33851 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -526,10 +526,15 @@
sb->s_blocksize_bits = 10;
sb->s_magic = NCP_SUPER_MAGIC;
sb->s_op = &ncp_sops;
+ sb->s_bdi = &server->bdi;
server = NCP_SBP(sb);
memset(server, 0, sizeof(*server));
+ error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY);
+ if (error)
+ goto out_bdi;
+
server->ncp_filp = ncp_filp;
server->ncp_sock = sock;
@@ -719,6 +724,8 @@
if (server->info_filp)
fput(server->info_filp);
out_fput:
+ bdi_destroy(&server->bdi);
+out_bdi:
/* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>:
*
* The previously used put_filp(ncp_filp); was bogous, since
@@ -756,6 +763,7 @@
kill_pid(server->m.wdog_pid, SIGTERM, 1);
put_pid(server->m.wdog_pid);
+ bdi_destroy(&server->bdi);
kfree(server->priv.data);
kfree(server->auth.object_name);
vfree(server->rxbuf);
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index a8766c4..acc9c49 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -966,6 +966,8 @@
static void nfs_server_copy_userdata(struct nfs_server *target, struct nfs_server *source)
{
target->flags = source->flags;
+ target->rsize = source->rsize;
+ target->wsize = source->wsize;
target->acregmin = source->acregmin;
target->acregmax = source->acregmax;
target->acdirmin = source->acdirmin;
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index be46f26..a7bb5c6 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -837,6 +837,8 @@
/* If we have submounts, don't unhash ! */
if (have_submounts(dentry))
goto out_valid;
+ if (dentry->d_flags & DCACHE_DISCONNECTED)
+ goto out_valid;
shrink_dcache_parent(dentry);
}
d_drop(dentry);
@@ -1050,7 +1052,7 @@
struct inode *dir;
int openflags, ret = 0;
- if (!is_atomic_open(nd))
+ if (!is_atomic_open(nd) || d_mountpoint(dentry))
goto no_open;
parent = dget_parent(dentry);
dir = parent->d_inode;
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 6380670..071fced 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5218,9 +5218,12 @@
msg.rpc_resp = &calldata->res;
task_setup_data.callback_data = calldata;
task = rpc_run_task(&task_setup_data);
- if (IS_ERR(task))
+ if (IS_ERR(task)) {
status = PTR_ERR(task);
+ goto out;
+ }
rpc_put_task(task);
+ return 0;
out:
dprintk("<-- %s status=%d\n", __func__, status);
return status;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index e016372..b4148fc 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2187,6 +2187,7 @@
if (data->version == 4) {
error = nfs4_try_mount(flags, dev_name, data, mnt);
kfree(data->client_address);
+ kfree(data->nfs_server.export_path);
goto out;
}
#endif /* CONFIG_NFS_V4 */
@@ -2657,7 +2658,7 @@
devname = nfs_path(path->mnt->mnt_devname,
path->mnt->mnt_root, path->dentry,
page, PAGE_SIZE);
- if (devname == NULL)
+ if (IS_ERR(devname))
goto out_freepage;
tmp = kstrdup(devname, GFP_KERNEL);
if (tmp == NULL)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index de38d63..3aea3ca 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1201,6 +1201,25 @@
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+static int nfs_commit_set_lock(struct nfs_inode *nfsi, int may_wait)
+{
+ if (!test_and_set_bit(NFS_INO_COMMIT, &nfsi->flags))
+ return 1;
+ if (may_wait && !out_of_line_wait_on_bit_lock(&nfsi->flags,
+ NFS_INO_COMMIT, nfs_wait_bit_killable,
+ TASK_KILLABLE))
+ return 1;
+ return 0;
+}
+
+static void nfs_commit_clear_lock(struct nfs_inode *nfsi)
+{
+ clear_bit(NFS_INO_COMMIT, &nfsi->flags);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&nfsi->flags, NFS_INO_COMMIT);
+}
+
+
static void nfs_commitdata_release(void *data)
{
struct nfs_write_data *wdata = data;
@@ -1262,8 +1281,6 @@
task = rpc_run_task(&task_setup_data);
if (IS_ERR(task))
return PTR_ERR(task);
- if (how & FLUSH_SYNC)
- rpc_wait_for_completion_task(task);
rpc_put_task(task);
return 0;
}
@@ -1294,6 +1311,7 @@
BDI_RECLAIMABLE);
nfs_clear_page_tag_locked(req);
}
+ nfs_commit_clear_lock(NFS_I(inode));
return -ENOMEM;
}
@@ -1349,6 +1367,7 @@
next:
nfs_clear_page_tag_locked(req);
}
+ nfs_commit_clear_lock(NFS_I(data->inode));
nfs_commitdata_release(calldata);
}
@@ -1363,8 +1382,11 @@
static int nfs_commit_inode(struct inode *inode, int how)
{
LIST_HEAD(head);
- int res;
+ int may_wait = how & FLUSH_SYNC;
+ int res = 0;
+ if (!nfs_commit_set_lock(NFS_I(inode), may_wait))
+ goto out;
spin_lock(&inode->i_lock);
res = nfs_scan_commit(inode, &head, 0, 0);
spin_unlock(&inode->i_lock);
@@ -1372,7 +1394,13 @@
int error = nfs_commit_list(inode, &head, how);
if (error < 0)
return error;
- }
+ if (may_wait)
+ wait_on_bit(&NFS_I(inode)->flags, NFS_INO_COMMIT,
+ nfs_wait_bit_killable,
+ TASK_KILLABLE);
+ } else
+ nfs_commit_clear_lock(NFS_I(inode));
+out:
return res;
}
@@ -1444,6 +1472,7 @@
BUG_ON(!PageLocked(page));
for (;;) {
+ wait_on_page_writeback(page);
req = nfs_page_find_request(page);
if (req == NULL)
break;
@@ -1478,30 +1507,18 @@
.range_start = range_start,
.range_end = range_end,
};
- struct nfs_page *req;
- int need_commit;
int ret;
while(PagePrivate(page)) {
+ wait_on_page_writeback(page);
if (clear_page_dirty_for_io(page)) {
ret = nfs_writepage_locked(page, &wbc);
if (ret < 0)
goto out_error;
}
- req = nfs_find_and_lock_request(page);
- if (!req)
- break;
- if (IS_ERR(req)) {
- ret = PTR_ERR(req);
+ ret = sync_inode(inode, &wbc);
+ if (ret < 0)
goto out_error;
- }
- need_commit = test_bit(PG_CLEAN, &req->wb_flags);
- nfs_clear_page_tag_locked(req);
- if (need_commit) {
- ret = nfs_commit_inode(inode, FLUSH_SYNC);
- if (ret < 0)
- goto out_error;
- }
}
return 0;
out_error:
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index e170317..34ccf81 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -161,10 +161,10 @@
argp->p = page_address(argp->pagelist[0]);
argp->pagelist++;
if (argp->pagelen < PAGE_SIZE) {
- argp->end = p + (argp->pagelen>>2);
+ argp->end = argp->p + (argp->pagelen>>2);
argp->pagelen = 0;
} else {
- argp->end = p + (PAGE_SIZE>>2);
+ argp->end = argp->p + (PAGE_SIZE>>2);
argp->pagelen -= PAGE_SIZE;
}
memcpy(((char*)p)+avail, argp->p, (nbytes - avail));
@@ -1426,10 +1426,10 @@
argp->p = page_address(argp->pagelist[0]);
argp->pagelist++;
if (argp->pagelen < PAGE_SIZE) {
- argp->end = p + (argp->pagelen>>2);
+ argp->end = argp->p + (argp->pagelen>>2);
argp->pagelen = 0;
} else {
- argp->end = p + (PAGE_SIZE>>2);
+ argp->end = argp->p + (PAGE_SIZE>>2);
argp->pagelen -= PAGE_SIZE;
}
}
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 0cdbc5e..48145f50 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -749,6 +749,7 @@
sb->s_export_op = &nilfs_export_ops;
sb->s_root = NULL;
sb->s_time_gran = 1;
+ sb->s_bdi = nilfs->ns_bdi;
err = load_nilfs(nilfs, sbi);
if (err)
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 3e56dbf..b3a159b 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -15,6 +15,7 @@
config INOTIFY_USER
bool "Inotify support for userspace"
+ select ANON_INODES
select FSNOTIFY
default y
---help---
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index ecebb22..f9d5d3ffc 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -406,6 +406,7 @@
struct buffer_head *bh)
{
int ret = 0;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data;
mlog_entry_void();
@@ -425,6 +426,7 @@
get_bh(bh); /* for end_buffer_write_sync() */
bh->b_end_io = end_buffer_write_sync;
+ ocfs2_compute_meta_ecc(osb->sb, bh->b_data, &di->i_check);
submit_bh(WRITE, bh);
wait_on_buffer(bh);
diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c
index a795eb9..12d5eb7 100644
--- a/fs/ocfs2/dlm/dlmast.c
+++ b/fs/ocfs2/dlm/dlmast.c
@@ -184,9 +184,8 @@
BUG_ON(!lksb);
/* only updates if this node masters the lockres */
+ spin_lock(&res->spinlock);
if (res->owner == dlm->node_num) {
-
- spin_lock(&res->spinlock);
/* check the lksb flags for the direction */
if (lksb->flags & DLM_LKSB_GET_LVB) {
mlog(0, "getting lvb from lockres for %s node\n",
@@ -201,8 +200,8 @@
* here. In the future we might want to clear it at the time
* the put is actually done.
*/
- spin_unlock(&res->spinlock);
}
+ spin_unlock(&res->spinlock);
/* reset any lvb flags on the lksb */
lksb->flags &= ~(DLM_LKSB_PUT_LVB|DLM_LKSB_GET_LVB);
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index 1b0de15..b83d610 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -112,20 +112,20 @@
* O_RDONLY -> PRMODE level
* O_WRONLY -> EXMODE level
*
- * O_NONBLOCK -> LKM_NOQUEUE
+ * O_NONBLOCK -> NOQUEUE
*/
static int dlmfs_decode_open_flags(int open_flags,
int *level,
int *flags)
{
if (open_flags & (O_WRONLY|O_RDWR))
- *level = LKM_EXMODE;
+ *level = DLM_LOCK_EX;
else
- *level = LKM_PRMODE;
+ *level = DLM_LOCK_PR;
*flags = 0;
if (open_flags & O_NONBLOCK)
- *flags |= LKM_NOQUEUE;
+ *flags |= DLM_LKF_NOQUEUE;
return 0;
}
@@ -166,7 +166,7 @@
* to be able userspace to be able to distinguish a
* valid lock request from one that simply couldn't be
* granted. */
- if (flags & LKM_NOQUEUE && status == -EAGAIN)
+ if (flags & DLM_LKF_NOQUEUE && status == -EAGAIN)
status = -ETXTBSY;
kfree(fp);
goto bail;
@@ -193,7 +193,7 @@
status = 0;
if (fp) {
level = fp->fp_lock_level;
- if (level != LKM_IVMODE)
+ if (level != DLM_LOCK_IV)
user_dlm_cluster_unlock(&ip->ip_lockres, level);
kfree(fp);
@@ -262,7 +262,7 @@
if ((count + *ppos) > i_size_read(inode))
readlen = i_size_read(inode) - *ppos;
else
- readlen = count - *ppos;
+ readlen = count;
lvb_buf = kmalloc(readlen, GFP_NOFS);
if (!lvb_buf)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 17947dc..a5fbd9c 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -684,6 +684,7 @@
if (why == RESTART_META) {
mlog(0, "restarting function.\n");
restart_func = 1;
+ status = 0;
} else {
BUG_ON(why != RESTART_TRANS);
@@ -1981,18 +1982,18 @@
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb, rw_level);
+ ret = generic_segment_checks(iov, &nr_segs, &ocount,
+ VERIFY_READ);
+ if (ret)
+ goto out_dio;
+
+ count = ocount;
+ ret = generic_write_checks(file, ppos, &count,
+ S_ISBLK(inode->i_mode));
+ if (ret)
+ goto out_dio;
+
if (direct_io) {
- ret = generic_segment_checks(iov, &nr_segs, &ocount,
- VERIFY_READ);
- if (ret)
- goto out_dio;
-
- count = ocount;
- ret = generic_write_checks(file, ppos, &count,
- S_ISBLK(inode->i_mode));
- if (ret)
- goto out_dio;
-
written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
ppos, count, ocount);
if (written < 0) {
@@ -2007,7 +2008,10 @@
goto out_dio;
}
} else {
- written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
+ current->backing_dev_info = file->f_mapping->backing_dev_info;
+ written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos,
+ ppos, count, 0);
+ current->backing_dev_info = NULL;
}
out_dio:
@@ -2021,9 +2025,9 @@
if (ret < 0)
written = ret;
- if (!ret && (old_size != i_size_read(inode) ||
- old_clusters != OCFS2_I(inode)->ip_clusters ||
- has_refcount)) {
+ if (!ret && ((old_size != i_size_read(inode)) ||
+ (old_clusters != OCFS2_I(inode)->ip_clusters) ||
+ has_refcount)) {
ret = jbd2_journal_force_commit(osb->journal->j_journal);
if (ret < 0)
written = ret;
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 07cc8bb..af18988 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -558,6 +558,7 @@
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
+ handle = NULL;
mlog_errno(status);
goto out;
}
@@ -639,11 +640,13 @@
goto bail_unlock;
}
- status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode,
- orphan_dir_bh);
- if (status < 0) {
- mlog_errno(status);
- goto bail_commit;
+ if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
+ status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode,
+ orphan_dir_bh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto bail_commit;
+ }
}
/* set the inodes dtime */
@@ -722,38 +725,39 @@
static int ocfs2_wipe_inode(struct inode *inode,
struct buffer_head *di_bh)
{
- int status, orphaned_slot;
+ int status, orphaned_slot = -1;
struct inode *orphan_dir_inode = NULL;
struct buffer_head *orphan_dir_bh = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- struct ocfs2_dinode *di;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data;
- di = (struct ocfs2_dinode *) di_bh->b_data;
- orphaned_slot = le16_to_cpu(di->i_orphaned_slot);
+ if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
+ orphaned_slot = le16_to_cpu(di->i_orphaned_slot);
- status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
- if (status)
- return status;
+ status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
+ if (status)
+ return status;
- orphan_dir_inode = ocfs2_get_system_file_inode(osb,
- ORPHAN_DIR_SYSTEM_INODE,
- orphaned_slot);
- if (!orphan_dir_inode) {
- status = -EEXIST;
- mlog_errno(status);
- goto bail;
- }
+ orphan_dir_inode = ocfs2_get_system_file_inode(osb,
+ ORPHAN_DIR_SYSTEM_INODE,
+ orphaned_slot);
+ if (!orphan_dir_inode) {
+ status = -EEXIST;
+ mlog_errno(status);
+ goto bail;
+ }
- /* Lock the orphan dir. The lock will be held for the entire
- * delete_inode operation. We do this now to avoid races with
- * recovery completion on other nodes. */
- mutex_lock(&orphan_dir_inode->i_mutex);
- status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
- if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
+ /* Lock the orphan dir. The lock will be held for the entire
+ * delete_inode operation. We do this now to avoid races with
+ * recovery completion on other nodes. */
+ mutex_lock(&orphan_dir_inode->i_mutex);
+ status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
+ if (status < 0) {
+ mutex_unlock(&orphan_dir_inode->i_mutex);
- mlog_errno(status);
- goto bail;
+ mlog_errno(status);
+ goto bail;
+ }
}
/* we do this while holding the orphan dir lock because we
@@ -794,6 +798,9 @@
mlog_errno(status);
bail_unlock_dir:
+ if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)
+ return status;
+
ocfs2_inode_unlock(orphan_dir_inode, 1);
mutex_unlock(&orphan_dir_inode->i_mutex);
brelse(orphan_dir_bh);
@@ -889,7 +896,8 @@
/* Do some basic inode verification... */
di = (struct ocfs2_dinode *) di_bh->b_data;
- if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL))) {
+ if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL)) &&
+ !(oi->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
/*
* Inodes in the orphan dir must have ORPHANED_FL. The only
* inodes that come back out of the orphan dir are reflink
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index ba4fe07..0b28e19 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -100,6 +100,8 @@
#define OCFS2_INODE_MAYBE_ORPHANED 0x00000020
/* Does someone have the file open O_DIRECT */
#define OCFS2_INODE_OPEN_DIRECT 0x00000040
+/* Tell the inode wipe code it's not in orphan dir */
+#define OCFS2_INODE_SKIP_ORPHAN_DIR 0x00000080
static inline struct ocfs2_inode_info *OCFS2_I(struct inode *inode)
{
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index b1eb50a..4cbb18f 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -408,6 +408,19 @@
}
}
+ /*
+ * Do this before adding the entry to the directory. We add
+ * also set d_op after success so that ->d_iput() will cleanup
+ * the dentry lock even if ocfs2_add_entry() fails below.
+ */
+ status = ocfs2_dentry_attach_lock(dentry, inode,
+ OCFS2_I(dir)->ip_blkno);
+ if (status) {
+ mlog_errno(status);
+ goto leave;
+ }
+ dentry->d_op = &ocfs2_dentry_ops;
+
status = ocfs2_add_entry(handle, dentry, inode,
OCFS2_I(inode)->ip_blkno, parent_fe_bh,
&lookup);
@@ -416,15 +429,7 @@
goto leave;
}
- status = ocfs2_dentry_attach_lock(dentry, inode,
- OCFS2_I(dir)->ip_blkno);
- if (status) {
- mlog_errno(status);
- goto leave;
- }
-
insert_inode_hash(inode);
- dentry->d_op = &ocfs2_dentry_ops;
d_instantiate(dentry, inode);
status = 0;
leave:
@@ -445,11 +450,6 @@
ocfs2_free_dir_lookup_result(&lookup);
- if ((status < 0) && inode) {
- clear_nlink(inode);
- iput(inode);
- }
-
if (inode_ac)
ocfs2_free_alloc_context(inode_ac);
@@ -459,6 +459,17 @@
if (meta_ac)
ocfs2_free_alloc_context(meta_ac);
+ /*
+ * We should call iput after the i_mutex of the bitmap been
+ * unlocked in ocfs2_free_alloc_context, or the
+ * ocfs2_delete_inode will mutex_lock again.
+ */
+ if ((status < 0) && inode) {
+ OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR;
+ clear_nlink(inode);
+ iput(inode);
+ }
+
mlog_exit(status);
return status;
@@ -1771,6 +1782,18 @@
}
}
+ /*
+ * Do this before adding the entry to the directory. We add
+ * also set d_op after success so that ->d_iput() will cleanup
+ * the dentry lock even if ocfs2_add_entry() fails below.
+ */
+ status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno);
+ if (status) {
+ mlog_errno(status);
+ goto bail;
+ }
+ dentry->d_op = &ocfs2_dentry_ops;
+
status = ocfs2_add_entry(handle, dentry, inode,
le64_to_cpu(fe->i_blkno), parent_fe_bh,
&lookup);
@@ -1779,14 +1802,7 @@
goto bail;
}
- status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno);
- if (status) {
- mlog_errno(status);
- goto bail;
- }
-
insert_inode_hash(inode);
- dentry->d_op = &ocfs2_dentry_ops;
d_instantiate(dentry, inode);
bail:
if (status < 0 && did_quota)
@@ -1811,6 +1827,7 @@
if (xattr_ac)
ocfs2_free_alloc_context(xattr_ac);
if ((status < 0) && inode) {
+ OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR;
clear_nlink(inode);
iput(inode);
}
@@ -1976,6 +1993,7 @@
}
le32_add_cpu(&fe->i_flags, OCFS2_ORPHANED_FL);
+ OCFS2_I(inode)->ip_flags &= ~OCFS2_INODE_SKIP_ORPHAN_DIR;
/* Record which orphan dir our inode now resides
* in. delete_inode will use this to determine which orphan
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index bd96f6c..5cbcd0f0 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -4083,6 +4083,9 @@
di->i_attr = s_di->i_attr;
if (preserve) {
+ t_inode->i_uid = s_inode->i_uid;
+ t_inode->i_gid = s_inode->i_gid;
+ t_inode->i_mode = s_inode->i_mode;
di->i_uid = s_di->i_uid;
di->i_gid = s_di->i_gid;
di->i_mode = s_di->i_mode;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 7621db8..8418fcc 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2909,7 +2909,7 @@
*/
static const struct pid_entry tid_base_stuff[] = {
DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations),
- DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fd_operations),
+ DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations),
REG("environ", S_IRUSR, proc_environ_operations),
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index f8a6075a..0793044 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -46,8 +46,6 @@
struct reiserfs_de_head *deh)
{
struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
- if (reiserfs_expose_privroot(dir->d_sb))
- return 0;
return (dir == dir->d_parent && privroot->d_inode &&
deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
}
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 4f9586b..e7cc00e 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -554,7 +554,7 @@
if (!err && new_size < i_size_read(dentry->d_inode)) {
struct iattr newattrs = {
.ia_ctime = current_fs_time(inode->i_sb),
- .ia_size = buffer_size,
+ .ia_size = new_size,
.ia_valid = ATTR_SIZE | ATTR_CTIME,
};
@@ -973,21 +973,13 @@
return generic_permission(inode, mask, NULL);
}
-/* This will catch lookups from the fs root to .reiserfs_priv */
-static int
-xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
+static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd)
{
- struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
- if (container_of(q1, struct dentry, d_name) == priv_root)
- return -ENOENT;
- if (q1->len == name->len &&
- !memcmp(q1->name, name->name, name->len))
- return 0;
- return 1;
+ return -EPERM;
}
static const struct dentry_operations xattr_lookup_poison_ops = {
- .d_compare = xattr_lookup_poison,
+ .d_revalidate = xattr_hide_revalidate,
};
int reiserfs_lookup_privroot(struct super_block *s)
@@ -1001,8 +993,7 @@
strlen(PRIVROOT_NAME));
if (!IS_ERR(dentry)) {
REISERFS_SB(s)->priv_root = dentry;
- if (!reiserfs_expose_privroot(s))
- s->s_root->d_op = &xattr_lookup_poison_ops;
+ dentry->d_op = &xattr_lookup_poison_ops;
if (dentry->d_inode)
dentry->d_inode->i_flags |= S_PRIVATE;
} else
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index 1c4c8f0..dfa1d67 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -479,6 +479,7 @@
if (server->conn_pid)
kill_pid(server->conn_pid, SIGTERM, 1);
+ bdi_destroy(&server->bdi);
kfree(server->ops);
smb_unload_nls(server);
sb->s_fs_info = NULL;
@@ -525,6 +526,11 @@
if (!server)
goto out_no_server;
sb->s_fs_info = server;
+
+ if (bdi_setup_and_register(&server->bdi, "smbfs", BDI_CAP_MAP_COPY))
+ goto out_bdi;
+
+ sb->s_bdi = &server->bdi;
server->super_block = sb;
server->mnt = NULL;
@@ -624,6 +630,8 @@
out_bad_option:
kfree(mem);
out_no_mem:
+ bdi_destroy(&server->bdi);
+out_bdi:
if (!server->mnt)
printk(KERN_ERR "smb_fill_super: allocation failure\n");
sb->s_fs_info = NULL;
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index 1cb0d81..653c030 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -87,9 +87,8 @@
u64 cur_index = index >> msblk->devblksize_log2;
int bytes, compressed, b = 0, k = 0, page = 0, avail;
-
- bh = kcalloc((msblk->block_size >> msblk->devblksize_log2) + 1,
- sizeof(*bh), GFP_KERNEL);
+ bh = kcalloc(((srclength + msblk->devblksize - 1)
+ >> msblk->devblksize_log2) + 1, sizeof(*bh), GFP_KERNEL);
if (bh == NULL)
return -ENOMEM;
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 3550aec..48b6f4a 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -275,7 +275,8 @@
err = squashfs_read_inode(root, root_inode);
if (err) {
- iget_failed(root);
+ make_bad_inode(root);
+ iput(root);
goto failed_mount;
}
insert_inode_hash(root);
@@ -353,6 +354,7 @@
kfree(sbi->id_table);
kfree(sbi->fragment_index);
kfree(sbi->meta_index);
+ kfree(sbi->inode_lookup_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
diff --git a/fs/squashfs/zlib_wrapper.c b/fs/squashfs/zlib_wrapper.c
index 15a03d0..7a60387 100644
--- a/fs/squashfs/zlib_wrapper.c
+++ b/fs/squashfs/zlib_wrapper.c
@@ -128,8 +128,9 @@
goto release_mutex;
}
+ length = stream->total_out;
mutex_unlock(&msblk->read_data_mutex);
- return stream->total_out;
+ return length;
release_mutex:
mutex_unlock(&msblk->read_data_mutex);
diff --git a/fs/super.c b/fs/super.c
index f35ac60..1527e6a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -37,6 +37,7 @@
#include <linux/kobject.h>
#include <linux/mutex.h>
#include <linux/file.h>
+#include <linux/backing-dev.h>
#include <asm/uaccess.h>
#include "internal.h"
@@ -693,6 +694,7 @@
return -EMFILE;
}
s->s_dev = MKDEV(0, dev & MINORMASK);
+ s->s_bdi = &noop_backing_dev_info;
return 0;
}
@@ -954,10 +956,11 @@
if (error < 0)
goto out_free_secdata;
BUG_ON(!mnt->mnt_sb);
+ WARN_ON(!mnt->mnt_sb->s_bdi);
- error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
- if (error)
- goto out_sb;
+ error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
+ if (error)
+ goto out_sb;
/*
* filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
diff --git a/fs/sync.c b/fs/sync.c
index fc5c3d7..92b2281 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -14,6 +14,7 @@
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
+#include <linux/backing-dev.h>
#include "internal.h"
#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
@@ -32,7 +33,7 @@
* This should be safe, as we require bdi backing to actually
* write out data in the first place
*/
- if (!sb->s_bdi)
+ if (!sb->s_bdi || sb->s_bdi == &noop_backing_dev_info)
return 0;
if (sb->s_qcop && sb->s_qcop->quota_sync)
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 52e06b4..29f1edc 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1209,6 +1209,7 @@
xfs_unmountfs(mp);
xfs_freesb(mp);
+ xfs_inode_shrinker_unregister(mp);
xfs_icsb_destroy_counters(mp);
xfs_close_devices(mp);
xfs_dmops_put(mp);
@@ -1622,6 +1623,8 @@
if (error)
goto fail_vnrele;
+ xfs_inode_shrinker_register(mp);
+
kfree(mtpt);
return 0;
@@ -1867,6 +1870,7 @@
goto out_cleanup_procfs;
vfs_initquota();
+ xfs_inode_shrinker_init();
error = register_filesystem(&xfs_fs_type);
if (error)
@@ -1894,6 +1898,7 @@
{
vfs_exitquota();
unregister_filesystem(&xfs_fs_type);
+ xfs_inode_shrinker_destroy();
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index fd96982..a427c63 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -95,7 +95,8 @@
struct xfs_perag *pag, int flags),
int flags,
int tag,
- int exclusive)
+ int exclusive,
+ int *nr_to_scan)
{
uint32_t first_index;
int last_error = 0;
@@ -134,7 +135,7 @@
if (error == EFSCORRUPTED)
break;
- } while (1);
+ } while ((*nr_to_scan)--);
if (skipped) {
delay(1);
@@ -150,12 +151,15 @@
struct xfs_perag *pag, int flags),
int flags,
int tag,
- int exclusive)
+ int exclusive,
+ int *nr_to_scan)
{
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
+ int nr;
+ nr = nr_to_scan ? *nr_to_scan : INT_MAX;
for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
struct xfs_perag *pag;
@@ -165,14 +169,18 @@
continue;
}
error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
- exclusive);
+ exclusive, &nr);
xfs_perag_put(pag);
if (error) {
last_error = error;
if (error == EFSCORRUPTED)
break;
}
+ if (nr <= 0)
+ break;
}
+ if (nr_to_scan)
+ *nr_to_scan = nr;
return XFS_ERROR(last_error);
}
@@ -291,7 +299,7 @@
ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
- XFS_ICI_NO_TAG, 0);
+ XFS_ICI_NO_TAG, 0, NULL);
if (error)
return XFS_ERROR(error);
@@ -310,7 +318,7 @@
ASSERT((flags & ~SYNC_WAIT) == 0);
return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
- XFS_ICI_NO_TAG, 0);
+ XFS_ICI_NO_TAG, 0, NULL);
}
STATIC int
@@ -673,6 +681,7 @@
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
+ pag->pag_ici_reclaimable++;
}
/*
@@ -705,6 +714,7 @@
{
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ pag->pag_ici_reclaimable--;
}
/*
@@ -854,5 +864,93 @@
int mode)
{
return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
- XFS_ICI_RECLAIM_TAG, 1);
+ XFS_ICI_RECLAIM_TAG, 1, NULL);
+}
+
+/*
+ * Shrinker infrastructure.
+ *
+ * This is all far more complex than it needs to be. It adds a global list of
+ * mounts because the shrinkers can only call a global context. We need to make
+ * the shrinkers pass a context to avoid the need for global state.
+ */
+static LIST_HEAD(xfs_mount_list);
+static struct rw_semaphore xfs_mount_list_lock;
+
+static int
+xfs_reclaim_inode_shrink(
+ int nr_to_scan,
+ gfp_t gfp_mask)
+{
+ struct xfs_mount *mp;
+ struct xfs_perag *pag;
+ xfs_agnumber_t ag;
+ int reclaimable = 0;
+
+ if (nr_to_scan) {
+ if (!(gfp_mask & __GFP_FS))
+ return -1;
+
+ down_read(&xfs_mount_list_lock);
+ list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
+ xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+ XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
+ if (nr_to_scan <= 0)
+ break;
+ }
+ up_read(&xfs_mount_list_lock);
+ }
+
+ down_read(&xfs_mount_list_lock);
+ list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
+ for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
+
+ pag = xfs_perag_get(mp, ag);
+ if (!pag->pag_ici_init) {
+ xfs_perag_put(pag);
+ continue;
+ }
+ reclaimable += pag->pag_ici_reclaimable;
+ xfs_perag_put(pag);
+ }
+ }
+ up_read(&xfs_mount_list_lock);
+ return reclaimable;
+}
+
+static struct shrinker xfs_inode_shrinker = {
+ .shrink = xfs_reclaim_inode_shrink,
+ .seeks = DEFAULT_SEEKS,
+};
+
+void __init
+xfs_inode_shrinker_init(void)
+{
+ init_rwsem(&xfs_mount_list_lock);
+ register_shrinker(&xfs_inode_shrinker);
+}
+
+void
+xfs_inode_shrinker_destroy(void)
+{
+ ASSERT(list_empty(&xfs_mount_list));
+ unregister_shrinker(&xfs_inode_shrinker);
+}
+
+void
+xfs_inode_shrinker_register(
+ struct xfs_mount *mp)
+{
+ down_write(&xfs_mount_list_lock);
+ list_add_tail(&mp->m_mplist, &xfs_mount_list);
+ up_write(&xfs_mount_list_lock);
+}
+
+void
+xfs_inode_shrinker_unregister(
+ struct xfs_mount *mp)
+{
+ down_write(&xfs_mount_list_lock);
+ list_del(&mp->m_mplist);
+ up_write(&xfs_mount_list_lock);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index d480c34..cdcbaac 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -53,6 +53,11 @@
int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
- int flags, int tag, int write_lock);
+ int flags, int tag, int write_lock, int *nr_to_scan);
+
+void xfs_inode_shrinker_init(void);
+void xfs_inode_shrinker_destroy(void);
+void xfs_inode_shrinker_register(struct xfs_mount *mp);
+void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
#endif
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 5d0ee8d..50bee07 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -891,7 +891,8 @@
uint flags)
{
ASSERT(mp->m_quotainfo);
- xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
+ xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags,
+ XFS_ICI_NO_TAG, 0, NULL);
}
/*------------------------------------------------------------------------*/
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index b1a5a1f..abb8222 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -223,6 +223,7 @@
int pag_ici_init; /* incore inode cache initialised */
rwlock_t pag_ici_lock; /* incore inode lock */
struct radix_tree_root pag_ici_root; /* incore inode cache root */
+ int pag_ici_reclaimable; /* reclaimable inodes */
#endif
int pagb_count; /* pagb slots in use */
xfs_perag_busy_t pagb_list[XFS_PAGB_NUM_SLOTS]; /* unstable blocks */
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index cd27c9d..5bba29a 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -177,16 +177,26 @@
XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
return EINVAL;
- /* Check root block of temp in btree form to max in target */
+ /*
+ * If we are in a btree format, check that the temp root block will fit
+ * in the target and that it has enough extents to be in btree format
+ * in the target.
+ *
+ * Note that we have to be careful to allow btree->extent conversions
+ * (a common defrag case) which will occur when the temp inode is in
+ * extent format...
+ */
if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_BOFF(ip) &&
- tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+ ((XFS_IFORK_BOFF(ip) &&
+ tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip)) ||
+ XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) <= ip->i_df.if_ext_max))
return EINVAL;
- /* Check root block of target in btree form to max in temp */
+ /* Reciprocal target->temp btree format checks */
if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_BOFF(tip) &&
- ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+ ((XFS_IFORK_BOFF(tip) &&
+ ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip)) ||
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) <= tip->i_df.if_ext_max))
return EINVAL;
return 0;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 4fa0bc7..9ff48a16 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -259,6 +259,7 @@
wait_queue_head_t m_wait_single_sync_task;
__int64_t m_update_flags; /* sb flags we need to update
on the next remount,rw */
+ struct list_head m_mplist; /* inode shrinker mount list */
} xfs_mount_t;
/*
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index fcbc26a..bd0e3c6 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -101,6 +101,7 @@
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
+int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
long nr_pages);
int bdi_writeback_task(struct bdi_writeback *wb);
@@ -246,6 +247,7 @@
#endif
extern struct backing_dev_info default_backing_dev_info;
+extern struct backing_dev_info noop_backing_dev_info;
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page);
int writeback_in_progress(struct backing_dev_info *bdi);
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 5b5d473..8859e2e 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -7,6 +7,8 @@
#define MAX_CODADEVS 5 /* how many do we allow */
#ifdef __KERNEL__
+#include <linux/backing-dev.h>
+
struct kstatfs;
/* communication pending/processing queues */
@@ -17,6 +19,7 @@
struct list_head vc_processing;
int vc_inuse;
struct super_block *vc_sb;
+ struct backing_dev_info bdi;
};
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 81f3b14..68f883b 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -17,7 +17,7 @@
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h
index 9c63f06..9b4bb5f 100644
--- a/include/linux/firewire-constants.h
+++ b/include/linux/firewire-constants.h
@@ -17,7 +17,7 @@
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 39d57bc..44f35ae 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2315,8 +2315,9 @@
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block);
+ struct fiemap_extent_info *fieinfo,
+ loff_t start, loff_t len,
+ get_block_t *get_block);
extern int generic_block_fiemap(struct inode *inode,
struct fiemap_extent_info *fieinfo, u64 start,
u64 len, get_block_t *get_block);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 0a5da63..6ed1d59 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -355,6 +355,8 @@
int nr;
char name[48];
struct completion dev_released;
+
+ struct list_head userspace_clients;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index a3fd0f9..169d077 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -54,7 +54,7 @@
*/
struct kvm_io_bus {
int dev_count;
-#define NR_IOBUS_DEVS 6
+#define NR_IOBUS_DEVS 200
struct kvm_io_device *devs[NR_IOBUS_DEVS];
};
@@ -119,6 +119,11 @@
int user_alloc;
};
+static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
+{
+ return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+}
+
struct kvm_kernel_irq_routing_entry {
u32 gsi;
u32 type;
diff --git a/include/linux/ncp_fs_sb.h b/include/linux/ncp_fs_sb.h
index 6330fc76..5ec9ca6 100644
--- a/include/linux/ncp_fs_sb.h
+++ b/include/linux/ncp_fs_sb.h
@@ -12,6 +12,7 @@
#include <linux/ncp_mount.h>
#include <linux/net.h>
#include <linux/mutex.h>
+#include <linux/backing-dev.h>
#ifdef __KERNEL__
@@ -127,6 +128,7 @@
size_t len;
__u8 data[128];
} unexpected_packet;
+ struct backing_dev_info bdi;
};
extern void ncp_tcp_rcv_proc(struct work_struct *work);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 1a0b85a..07ce460 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -209,6 +209,7 @@
#define NFS_INO_FLUSHING (4) /* inode is flushing out data */
#define NFS_INO_FSCACHE (5) /* inode can be cached by FS-Cache */
#define NFS_INO_FSCACHE_LOCK (6) /* FS-Cache cookie management lock */
+#define NFS_INO_COMMIT (7) /* inode is committing unstable writes */
static inline struct nfs_inode *NFS_I(const struct inode *inode)
{
diff --git a/include/linux/poison.h b/include/linux/poison.h
index 2110a81..34066ff 100644
--- a/include/linux/poison.h
+++ b/include/linux/poison.h
@@ -48,6 +48,15 @@
#define POISON_FREE 0x6b /* for use-after-free poisoning */
#define POISON_END 0xa5 /* end-byte of poisoning */
+/********** mm/hugetlb.c **********/
+/*
+ * Private mappings of hugetlb pages use this poisoned value for
+ * page->mapping. The core VM should not be doing anything with this mapping
+ * but futex requires the existence of some page->mapping value even though it
+ * is unused if PAGE_MAPPING_ANON is set.
+ */
+#define HUGETLB_POISON ((void *)(0x00300300 + POISON_POINTER_DELTA + PAGE_MAPPING_ANON))
+
/********** arch/$ARCH/mm/init.c **********/
#define POISON_FREE_INITMEM 0xcc
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 28c9fd0..ebd7472 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -183,9 +183,13 @@
{
/* Nothing except the stubbed out regulator API should be
* looking at the value except to check if it is an error
- * value so the actual return value doesn't matter.
+ * value. Drivers are free to handle NULL specifically by
+ * skipping all regulator API calls, but they don't have to.
+ * Drivers which don't, should make sure they properly handle
+ * corner cases of the API, such as regulator_get_voltage()
+ * returning 0.
*/
- return (struct regulator *)id;
+ return NULL;
}
static inline void regulator_put(struct regulator *regulator)
{
diff --git a/include/linux/smb_fs_sb.h b/include/linux/smb_fs_sb.h
index 8a060a7..bb947dd 100644
--- a/include/linux/smb_fs_sb.h
+++ b/include/linux/smb_fs_sb.h
@@ -10,6 +10,7 @@
#define _SMB_FS_SB
#include <linux/types.h>
+#include <linux/backing-dev.h>
#include <linux/smb.h>
/*
@@ -74,6 +75,8 @@
struct smb_ops *ops;
struct super_block *super_block;
+
+ struct backing_dev_info bdi;
};
static inline int
diff --git a/include/linux/usb.h b/include/linux/usb.h
index ce1323c..739f1fd 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1085,7 +1085,7 @@
* Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
* which tell the host controller driver that no such mapping is needed since
* the device driver is DMA-aware. For example, a device driver might
- * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
+ * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map().
* When these transfer flags are provided, host controller drivers will
* attempt to use the dma addresses found in the transfer_dma and/or
* setup_dma fields rather than determining a dma address themselves.
@@ -1366,11 +1366,23 @@
return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
}
-void *usb_buffer_alloc(struct usb_device *dev, size_t size,
+void *usb_alloc_coherent(struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
-void usb_buffer_free(struct usb_device *dev, size_t size,
+void usb_free_coherent(struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
+/* Compatible macros while we switch over */
+static inline void *usb_buffer_alloc(struct usb_device *dev, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma)
+{
+ return usb_alloc_coherent(dev, size, mem_flags, dma);
+}
+static inline void usb_buffer_free(struct usb_device *dev, size_t size,
+ void *addr, dma_addr_t dma)
+{
+ return usb_free_coherent(dev, size, addr, dma);
+}
+
#if 0
struct urb *usb_buffer_map(struct urb *urb);
void usb_buffer_dmasync(struct urb *urb);
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index d57847f..aab3c13 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -26,6 +26,7 @@
#ifdef __KERNEL__
#include <linux/device.h>
#include <pcmcia/ss.h>
+#include <asm/atomic.h>
/*
* PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus
@@ -94,10 +95,8 @@
config_req_t conf;
window_handle_t win;
- /* Is the device suspended, or in the process of
- * being removed? */
+ /* Is the device suspended? */
u16 suspended:1;
- u16 _removed:1;
/* Flags whether io, irq, win configurations were
* requested, and whether the configuration is "locked" */
@@ -115,7 +114,7 @@
u16 has_card_id:1;
u16 has_func_id:1;
- u16 reserved:3;
+ u16 reserved:4;
u8 func_id;
u16 manf_id;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 2e488b6..344705c 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -224,18 +224,16 @@
/* 16-bit state: */
struct {
- /* PCMCIA card is present in socket */
- u8 present:1;
/* "master" ioctl is used */
u8 busy:1;
- /* pcmcia module is being unloaded */
- u8 dead:1;
/* the PCMCIA card consists of two pseudo devices */
u8 has_pfc:1;
- u8 reserved:4;
+ u8 reserved:6;
} pcmcia_state;
+ /* non-zero if PCMCIA card is present */
+ atomic_t present;
#ifdef CONFIG_PCMCIA_IOCTL
struct user_info_t *user;
diff --git a/init/initramfs.c b/init/initramfs.c
index 37d3859..4b9c202 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -457,7 +457,8 @@
compress_name);
message = msg_buf;
}
- }
+ } else
+ error("junk in compressed archive");
if (state != Reset)
error("junk in compressed archive");
this_header = saved_offset + my_inptr;
diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c
index da5e139..e5c0244 100644
--- a/kernel/cgroup_freezer.c
+++ b/kernel/cgroup_freezer.c
@@ -205,9 +205,12 @@
* No lock is needed, since the task isn't on tasklist yet,
* so it can't be moved to another cgroup, which means the
* freezer won't be removed and will be valid during this
- * function call.
+ * function call. Nevertheless, apply RCU read-side critical
+ * section to suppress RCU lockdep false positives.
*/
+ rcu_read_lock();
freezer = task_freezer(task);
+ rcu_read_unlock();
/*
* The root cgroup is non-freezable, so we can skip the
diff --git a/kernel/cred.c b/kernel/cred.c
index e1dbe9e..62af181 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -398,6 +398,8 @@
error:
put_cred(new);
+ return NULL;
+
free_tgcred:
#ifdef CONFIG_KEYS
kfree(tgcred);
@@ -791,8 +793,6 @@
{
if (cred->magic != CRED_MAGIC)
return true;
- if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
- return true;
#ifdef CONFIG_SECURITY_SELINUX
if (selinux_is_enabled()) {
if ((unsigned long) cred->security < PAGE_SIZE)
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 2f3fbf8..3d1552d 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -4897,7 +4897,7 @@
err_free_put_context:
if (err < 0)
- kfree(event);
+ free_event(event);
err_put_context:
if (err < 0)
diff --git a/kernel/sched.c b/kernel/sched.c
index 6af210a..3c2a54f 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -323,6 +323,15 @@
/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
{
+ /*
+ * Strictly speaking this rcu_read_lock() is not needed since the
+ * task_group is tied to the cgroup, which in turn can never go away
+ * as long as there are tasks attached to it.
+ *
+ * However since task_group() uses task_subsys_state() which is an
+ * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
+ */
+ rcu_read_lock();
#ifdef CONFIG_FAIR_GROUP_SCHED
p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
p->se.parent = task_group(p)->se[cpu];
@@ -332,6 +341,7 @@
p->rt.rt_rq = task_group(p)->rt_rq[cpu];
p->rt.parent = task_group(p)->rt_se[cpu];
#endif
+ rcu_read_unlock();
}
#else
@@ -3780,7 +3790,7 @@
* the mutex owner just released it and exited.
*/
if (probe_kernel_address(&owner->cpu, cpu))
- goto out;
+ return 0;
#else
cpu = owner->cpu;
#endif
@@ -3790,14 +3800,14 @@
* the cpu field may no longer be valid.
*/
if (cpu >= nr_cpumask_bits)
- goto out;
+ return 0;
/*
* We need to validate that we can do a
* get_cpu() and that we have the percpu area.
*/
if (!cpu_online(cpu))
- goto out;
+ return 0;
rq = cpu_rq(cpu);
@@ -3816,7 +3826,7 @@
cpu_relax();
}
-out:
+
return 1;
}
#endif
diff --git a/kernel/sys.c b/kernel/sys.c
index 6d1a7e0..7cb426a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1118,7 +1118,7 @@
#ifdef COMPAT_UTS_MACHINE
#define override_architecture(name) \
- (current->personality == PER_LINUX32 && \
+ (personality(current->personality) == PER_LINUX32 && \
copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
sizeof(COMPAT_UTS_MACHINE)))
#else
diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c
index db521f4..bcb3a4b 100644
--- a/lib/decompress_unlzo.c
+++ b/lib/decompress_unlzo.c
@@ -97,7 +97,7 @@
u32 src_len, dst_len;
size_t tmp;
u8 *in_buf, *in_buf_save, *out_buf;
- int obytes_processed = 0;
+ int ret = -1;
set_error_fn(error_fn);
@@ -174,15 +174,22 @@
/* decompress */
tmp = dst_len;
- r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
+
+ /* When the input data is not compressed at all,
+ * lzo1x_decompress_safe will fail, so call memcpy()
+ * instead */
+ if (unlikely(dst_len == src_len))
+ memcpy(out_buf, in_buf, src_len);
+ else {
+ r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
out_buf, &tmp);
- if (r != LZO_E_OK || dst_len != tmp) {
- error("Compressed data violation");
- goto exit_2;
+ if (r != LZO_E_OK || dst_len != tmp) {
+ error("Compressed data violation");
+ goto exit_2;
+ }
}
- obytes_processed += dst_len;
if (flush)
flush(out_buf, dst_len);
if (output)
@@ -196,6 +203,7 @@
in_buf += src_len;
}
+ ret = 0;
exit_2:
if (!input)
free(in_buf);
@@ -203,7 +211,7 @@
if (!output)
free(out_buf);
exit:
- return obytes_processed;
+ return ret;
}
#define decompress unlzo
diff --git a/lib/flex_array.c b/lib/flex_array.c
index 66eef2e..41b1804 100644
--- a/lib/flex_array.c
+++ b/lib/flex_array.c
@@ -99,7 +99,7 @@
ret->element_size = element_size;
ret->total_nr_elements = total;
if (elements_fit_in_base(ret) && !(flags & __GFP_ZERO))
- memset(ret->parts[0], FLEX_ARRAY_FREE,
+ memset(&ret->parts[0], FLEX_ARRAY_FREE,
FLEX_ARRAY_BASE_BYTES_LEFT);
return ret;
}
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 7376b7c..46d34b0 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -118,6 +118,7 @@
return simple_strtoull(cp, endp, base);
}
+EXPORT_SYMBOL(simple_strtoll);
/**
* strict_strtoul - convert a string to an unsigned long strictly
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index f13e067..707d0dc6 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -11,6 +11,8 @@
#include <linux/writeback.h>
#include <linux/device.h>
+static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
+
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
{
}
@@ -25,6 +27,11 @@
};
EXPORT_SYMBOL_GPL(default_backing_dev_info);
+struct backing_dev_info noop_backing_dev_info = {
+ .name = "noop",
+};
+EXPORT_SYMBOL_GPL(noop_backing_dev_info);
+
static struct class *bdi_class;
/*
@@ -715,6 +722,33 @@
}
EXPORT_SYMBOL(bdi_destroy);
+/*
+ * For use from filesystems to quickly init and register a bdi associated
+ * with dirty writeback
+ */
+int bdi_setup_and_register(struct backing_dev_info *bdi, char *name,
+ unsigned int cap)
+{
+ char tmp[32];
+ int err;
+
+ bdi->name = name;
+ bdi->capabilities = cap;
+ err = bdi_init(bdi);
+ if (err)
+ return err;
+
+ sprintf(tmp, "%.28s%s", name, "-%d");
+ err = bdi_register(bdi, NULL, tmp, atomic_long_inc_return(&bdi_seq));
+ if (err) {
+ bdi_destroy(bdi);
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(bdi_setup_and_register);
+
static wait_queue_head_t congestion_wqh[2] = {
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[0]),
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 6034dc9..ffbdfc8 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -546,6 +546,7 @@
mapping = (struct address_space *) page_private(page);
set_page_private(page, 0);
+ page->mapping = NULL;
BUG_ON(page_count(page));
INIT_LIST_HEAD(&page->lru);
@@ -2447,8 +2448,10 @@
spin_lock(&inode->i_lock);
inode->i_blocks += blocks_per_huge_page(h);
spin_unlock(&inode->i_lock);
- } else
+ } else {
lock_page(page);
+ page->mapping = HUGETLB_POISON;
+ }
}
/*
diff --git a/mm/ksm.c b/mm/ksm.c
index 8cdfc2a..956880f 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -365,7 +365,7 @@
do {
cond_resched();
page = follow_page(vma, addr, FOLL_GET);
- if (!page)
+ if (IS_ERR_OR_NULL(page))
break;
if (PageKsm(page))
ret = handle_mm_fault(vma->vm_mm, vma, addr,
@@ -447,7 +447,7 @@
goto out;
page = follow_page(vma, addr, FOLL_GET);
- if (!page)
+ if (IS_ERR_OR_NULL(page))
goto out;
if (PageAnon(page)) {
flush_anon_page(vma, page, addr);
@@ -1086,7 +1086,7 @@
cond_resched();
tree_rmap_item = rb_entry(*new, struct rmap_item, node);
tree_page = get_mergeable_page(tree_rmap_item);
- if (!tree_page)
+ if (IS_ERR_OR_NULL(tree_page))
return NULL;
/*
@@ -1294,7 +1294,7 @@
if (ksm_test_exit(mm))
break;
*page = follow_page(vma, ksm_scan.address, FOLL_GET);
- if (*page && PageAnon(*page)) {
+ if (!IS_ERR_OR_NULL(*page) && PageAnon(*page)) {
flush_anon_page(vma, *page, ksm_scan.address);
flush_dcache_page(*page);
rmap_item = get_next_rmap_item(slot,
@@ -1308,7 +1308,7 @@
up_read(&mm->mmap_sem);
return rmap_item;
}
- if (*page)
+ if (!IS_ERR_OR_NULL(*page))
put_page(*page);
ksm_scan.address += PAGE_SIZE;
cond_resched();
@@ -1367,7 +1367,7 @@
static void ksm_do_scan(unsigned int scan_npages)
{
struct rmap_item *rmap_item;
- struct page *page;
+ struct page *uninitialized_var(page);
while (scan_npages--) {
cond_resched();
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index f4ede99..6c755de 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2429,11 +2429,11 @@
}
unlock_page_cgroup(pc);
+ *ptr = mem;
if (mem) {
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+ ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, ptr, false);
css_put(&mem->css);
}
- *ptr = mem;
return ret;
}
diff --git a/mm/mmap.c b/mm/mmap.c
index f90ea92..456ec6f 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1977,7 +1977,8 @@
return 0;
/* Clean everything up if vma_adjust failed. */
- new->vm_ops->close(new);
+ if (new->vm_ops && new->vm_ops->close)
+ new->vm_ops->close(new);
if (new->vm_file) {
if (vma->vm_flags & VM_EXECUTABLE)
removed_exe_file_vma(mm);
diff --git a/mm/rmap.c b/mm/rmap.c
index 526704e..07fc947 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -133,8 +133,8 @@
goto out_enomem_free_avc;
allocated = anon_vma;
}
- spin_lock(&anon_vma->lock);
+ spin_lock(&anon_vma->lock);
/* page_table_lock to protect against threads */
spin_lock(&mm->page_table_lock);
if (likely(!vma->anon_vma)) {
@@ -144,14 +144,15 @@
list_add(&avc->same_vma, &vma->anon_vma_chain);
list_add(&avc->same_anon_vma, &anon_vma->head);
allocated = NULL;
+ avc = NULL;
}
spin_unlock(&mm->page_table_lock);
-
spin_unlock(&anon_vma->lock);
- if (unlikely(allocated)) {
+
+ if (unlikely(allocated))
anon_vma_free(allocated);
+ if (unlikely(avc))
anon_vma_chain_free(avc);
- }
}
return 0;
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index f394fc1..95afe79 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -237,7 +237,7 @@
list_for_each_entry_safe(cred, next, &cred_unused, cr_lru) {
/* Enforce a 60 second garbage collection moratorium */
- if (time_in_range_open(cred->cr_expire, expired, jiffies) &&
+ if (time_in_range(cred->cr_expire, expired, jiffies) &&
test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0)
continue;
diff --git a/security/inode.c b/security/inode.c
index c3a7938..1c812e8 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -161,13 +161,13 @@
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(dentry)) {
+ if (!IS_ERR(*dentry)) {
if ((mode & S_IFMT) == S_IFDIR)
error = mkdir(parent->d_inode, *dentry, mode);
else
error = create(parent->d_inode, *dentry, mode);
} else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;
diff --git a/security/keys/gc.c b/security/keys/gc.c
index 1990231..a46e825 100644
--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -77,10 +77,10 @@
goto dont_gc;
/* scan the keyring looking for dead keys */
- klist = rcu_dereference_check(keyring->payload.subscriptions,
- lockdep_is_held(&key_serial_lock));
+ rcu_read_lock();
+ klist = rcu_dereference(keyring->payload.subscriptions);
if (!klist)
- goto dont_gc;
+ goto unlock_dont_gc;
for (loop = klist->nkeys - 1; loop >= 0; loop--) {
key = klist->keys[loop];
@@ -89,11 +89,14 @@
goto do_gc;
}
+unlock_dont_gc:
+ rcu_read_unlock();
dont_gc:
kleave(" = false");
return false;
do_gc:
+ rcu_read_unlock();
key_gc_cursor = keyring->serial;
key_get(keyring);
spin_unlock(&key_serial_lock);
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index e814d21..dd7cd0f 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -201,7 +201,7 @@
int loop, ret;
ret = 0;
- klist = rcu_dereference(keyring->payload.subscriptions);
+ klist = keyring->payload.subscriptions;
if (klist) {
/* calculate how much data we could return */
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 03fe63e..d737cea 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -68,7 +68,8 @@
{
const struct cred *cred = current_cred();
key_serial_t prkey, sskey;
- struct key *key = cons->key, *authkey = cons->authkey, *keyring;
+ struct key *key = cons->key, *authkey = cons->authkey, *keyring,
+ *session;
char *argv[9], *envp[3], uid_str[12], gid_str[12];
char key_str[12], keyring_str[3][12];
char desc[20];
@@ -112,10 +113,12 @@
if (cred->tgcred->process_keyring)
prkey = cred->tgcred->process_keyring->serial;
- if (cred->tgcred->session_keyring)
- sskey = rcu_dereference(cred->tgcred->session_keyring)->serial;
- else
- sskey = cred->user->session_keyring->serial;
+ rcu_read_lock();
+ session = rcu_dereference(cred->tgcred->session_keyring);
+ if (!session)
+ session = cred->user->session_keyring;
+ sskey = session->serial;
+ rcu_read_unlock();
sprintf(keyring_str[2], "%d", sskey);
@@ -336,8 +339,10 @@
key_already_present:
mutex_unlock(&key_construction_mutex);
- if (dest_keyring)
+ if (dest_keyring) {
+ __key_link(dest_keyring, key_ref_to_ptr(key_ref));
up_write(&dest_keyring->sem);
+ }
mutex_unlock(&user->cons_lock);
key_put(key);
*_key = key = key_ref_to_ptr(key_ref);
@@ -428,6 +433,11 @@
if (!IS_ERR(key_ref)) {
key = key_ref_to_ptr(key_ref);
+ if (dest_keyring) {
+ construct_get_dest_keyring(&dest_keyring);
+ key_link(dest_keyring, key);
+ key_put(dest_keyring);
+ }
} else if (PTR_ERR(key_ref) != -EAGAIN) {
key = ERR_CAST(key_ref);
} else {
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 7c687d5..e9aa079 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -199,7 +199,8 @@
struct user_key_payload *upayload;
long ret;
- upayload = rcu_dereference(key->payload.data);
+ upayload = rcu_dereference_protected(
+ key->payload.data, rwsem_is_locked(&((struct key *)key)->sem));
ret = upayload->datalen;
/* we can return the data as is */
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 7394365..5040c7b 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -1160,6 +1160,7 @@
{
struct snd_timer_user *tu = timeri->callback_data;
struct snd_timer_tread r1;
+ unsigned long flags;
if (event >= SNDRV_TIMER_EVENT_START &&
event <= SNDRV_TIMER_EVENT_PAUSE)
@@ -1169,9 +1170,9 @@
r1.event = event;
r1.tstamp = *tstamp;
r1.val = resolution;
- spin_lock(&tu->qlock);
+ spin_lock_irqsave(&tu->qlock, flags);
snd_timer_user_append_to_tqueue(tu, &r1);
- spin_unlock(&tu->qlock);
+ spin_unlock_irqrestore(&tu->qlock, flags);
kill_fasync(&tu->fasync, SIGIO, POLL_IN);
wake_up(&tu->qchange_sleep);
}
diff --git a/sound/isa/sb/es968.c b/sound/isa/sb/es968.c
index cafc3a7..ff18286f 100644
--- a/sound/isa/sb/es968.c
+++ b/sound/isa/sb/es968.c
@@ -93,7 +93,7 @@
return err;
}
port[dev] = pnp_port_start(pdev, 0);
- dma8[dev] = pnp_dma(pdev, 1);
+ dma8[dev] = pnp_dma(pdev, 0);
irq[dev] = pnp_irq(pdev, 0);
return 0;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index f669442..cec68152 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2273,6 +2273,7 @@
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
};
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index af34606..e9fdfc4 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -519,14 +519,6 @@
ad198x_power_eapd(codec);
return 0;
}
-
-static int ad198x_resume(struct hda_codec *codec)
-{
- ad198x_init(codec);
- snd_hda_codec_resume_amp(codec);
- snd_hda_codec_resume_cache(codec);
- return 0;
-}
#endif
static struct hda_codec_ops ad198x_patch_ops = {
@@ -539,7 +531,6 @@
#endif
#ifdef SND_HDA_NEEDS_RESUME
.suspend = ad198x_suspend,
- .resume = ad198x_resume,
#endif
.reboot_notify = ad198x_shutup,
};
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 7de782a..350ee8a 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -766,7 +766,7 @@
for (n = 0; n < AUTO_PIN_LAST; n++) {
if (!spec->adc_nid[n])
continue;
- err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[i]);
+ err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[n]);
if (err < 0)
return err;
}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 61682e1..56e5207 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1195,9 +1195,10 @@
switch (codec->subsystem_id >> 16) {
case 0x103c:
+ case 0x1631:
case 0x1734:
- /* HP & Fujitsu-Siemens laptops have really bad sound over 0dB
- * on NID 0x17. Fix max PCM level to 0 dB
+ /* HP, Packard Bell, & Fujitsu-Siemens laptops have really bad
+ * sound over 0dB on NID 0x17. Fix max PCM level to 0 dB
* (originally it has 0x2b steps with 0dB offset 0x14)
*/
snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT,
@@ -2842,6 +2843,9 @@
CXT5066_DELL_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
+ SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
+ SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD),
{}
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index aad1627..7404dba 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4143,7 +4143,7 @@
SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG),
SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734),
SND_PCI_QUIRK(0x1734, 0x1094, "FSC Amilo M1451G", ALC880_FUJITSU),
- SND_PCI_QUIRK(0x1734, 0x10ac, "FSC", ALC880_UNIWILL),
+ SND_PCI_QUIRK(0x1734, 0x10ac, "FSC AMILO Xi 1526", ALC880_F1734),
SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index c4be3fa..7fb7d01 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1607,6 +1607,10 @@
"Dell Studio 1555", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd,
"Dell Studio 1557", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02fe,
+ "Dell Studio XPS 1645", STAC_DELL_M6_BOTH),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0413,
+ "Dell Studio 1558", STAC_DELL_M6_BOTH),
{} /* terminator */
};
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index b64e781..b56e336 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -849,6 +849,7 @@
struct snd_kcontrol *master_switch;
struct snd_kcontrol *master_volume;
struct tasklet_struct hwvol_tq;
+ unsigned int in_suspend;
#ifdef CONFIG_PM
u16 *suspend_mem;
@@ -884,6 +885,7 @@
MODULE_DEVICE_TABLE(pci, snd_m3_ids);
static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x0E11, 0x0094, "Compaq Evo N600c", 0x0c),
SND_PCI_QUIRK(0x10f7, 0x833e, "Panasonic CF-28", 0x0d),
SND_PCI_QUIRK(0x10f7, 0x833d, "Panasonic CF-72", 0x0d),
SND_PCI_QUIRK(0x1033, 0x80f1, "NEC LM800J/7", 0x03),
@@ -1613,6 +1615,11 @@
outb(0x88, chip->iobase + SHADOW_MIX_REG_MASTER);
outb(0x88, chip->iobase + HW_VOL_COUNTER_MASTER);
+ /* Ignore spurious HV interrupts during suspend / resume, this avoids
+ mistaking them for a mute button press. */
+ if (chip->in_suspend)
+ return;
+
if (!chip->master_switch || !chip->master_volume)
return;
@@ -2424,6 +2431,7 @@
if (chip->suspend_mem == NULL)
return 0;
+ chip->in_suspend = 1;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
snd_pcm_suspend_all(chip->pcm);
snd_ac97_suspend(chip->ac97);
@@ -2497,6 +2505,7 @@
snd_m3_hv_init(chip);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ chip->in_suspend = 0;
return 0;
}
#endif /* CONFIG_PM */
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
index 612e18b..0ec20b6 100644
--- a/sound/soc/txx9/txx9aclc-ac97.c
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -254,3 +254,4 @@
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-ac97");
diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c
index 3175de9..95b17f7 100644
--- a/sound/soc/txx9/txx9aclc-generic.c
+++ b/sound/soc/txx9/txx9aclc-generic.c
@@ -96,3 +96,4 @@
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-generic");
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 5a0cd19..c82ae24 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -341,7 +341,11 @@
struct mm_struct *mm)
{
struct kvm *kvm = mmu_notifier_to_kvm(mn);
+ int idx;
+
+ idx = srcu_read_lock(&kvm->srcu);
kvm_arch_flush_shadow(kvm);
+ srcu_read_unlock(&kvm->srcu, idx);
}
static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
@@ -648,7 +652,7 @@
/* Allocate page dirty bitmap if needed */
if ((new.flags & KVM_MEM_LOG_DIRTY_PAGES) && !new.dirty_bitmap) {
- unsigned dirty_bytes = ALIGN(npages, BITS_PER_LONG) / 8;
+ unsigned long dirty_bytes = kvm_dirty_bitmap_bytes(&new);
new.dirty_bitmap = vmalloc(dirty_bytes);
if (!new.dirty_bitmap)
@@ -768,7 +772,7 @@
{
struct kvm_memory_slot *memslot;
int r, i;
- int n;
+ unsigned long n;
unsigned long any = 0;
r = -EINVAL;
@@ -780,7 +784,7 @@
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
for (i = 0; !any && i < n/sizeof(long); ++i)
any = memslot->dirty_bitmap[i];
@@ -1186,10 +1190,13 @@
memslot = gfn_to_memslot_unaliased(kvm, gfn);
if (memslot && memslot->dirty_bitmap) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
+ unsigned long *p = memslot->dirty_bitmap +
+ rel_gfn / BITS_PER_LONG;
+ int offset = rel_gfn % BITS_PER_LONG;
/* avoid RMW */
- if (!generic_test_le_bit(rel_gfn, memslot->dirty_bitmap))
- generic___set_le_bit(rel_gfn, memslot->dirty_bitmap);
+ if (!generic_test_le_bit(offset, p))
+ generic___set_le_bit(offset, p);
}
}