ARM: s3c: move into a common directory
s3c24xx and s3c64xx have a lot in common, but are split across three
separate directories, which makes the interaction of the header files
more complicated than necessary.
Move all three directories into a new mach-s3c, with a minimal
set of changes to each file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX
headers to new files, remove plat-samsung from MAINTAINERS]
Co-developed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
new file mode 100644
index 0000000..cc40316
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2440.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.fluff.org/ben/smdk2440/
+//
+// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 4,
+};
+
+static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
+ .displays = &smdk2440_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+};
+
+static void __init smdk2440_map_io(void)
+{
+ s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+ s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2440_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
+static void __init smdk2440_machine_init(void)
+{
+ s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c2440_init_irq,
+ .map_io = smdk2440_map_io,
+ .init_machine = smdk2440_machine_init,
+ .init_time = smdk2440_init_time,
+MACHINE_END