ALSA: emu10k1: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 75504da..2292697 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -217,7 +217,7 @@
}
if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
/* Hacks for Alice3 to work independent of haP16V driver */
- snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
+ dev_info(emu->card->dev, "Audigy2 value: Special config.\n");
/* Setup SRCMulti_I2S SamplingRate */
tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
tmp &= 0xfffff1ff;
@@ -723,7 +723,8 @@
if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
/* Audio Dock attached */
/* Return to Audio Dock programming mode */
- snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
+ dev_info(emu->card->dev,
+ "emu1010: Loading Audio Dock Firmware\n");
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK);
if (!emu->dock_fw) {
@@ -756,19 +757,25 @@
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0);
snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ®);
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n", reg);
+ dev_info(emu->card->dev,
+ "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n",
+ reg);
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
+ dev_info(emu->card->dev,
+ "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
if ((reg & 0x1f) != 0x15) {
/* FPGA failed to be programmed */
- snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n", reg);
+ dev_info(emu->card->dev,
+ "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n",
+ reg);
continue;
}
- snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
+ dev_info(emu->card->dev,
+ "emu1010: Audio Dock Firmware loaded\n");
snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp);
snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2);
- snd_printk(KERN_INFO "Audio Dock ver: %u.%u\n",
+ dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n",
tmp, tmp2);
/* Sync clocking between 1010 and Dock */
/* Allow DLL to settle */
@@ -777,7 +784,7 @@
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
}
}
- snd_printk(KERN_INFO "emu1010: firmware thread stopping\n");
+ dev_info(emu->card->dev, "emu1010: firmware thread stopping\n");
return 0;
}
@@ -818,7 +825,7 @@
u32 tmp, tmp2, reg;
int err;
- snd_printk(KERN_INFO "emu1010: Special config.\n");
+ dev_info(emu->card->dev, "emu1010: Special config.\n");
/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
* Lock Sound Memory Cache, Lock Tank Memory Cache,
* Mute all codecs.
@@ -843,7 +850,7 @@
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
- snd_printdd("reg1 = 0x%x\n", reg);
+ dev_dbg(emu->card->dev, "reg1 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
@@ -851,13 +858,14 @@
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0x02);
}
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
- snd_printdd("reg2 = 0x%x\n", reg);
+ dev_dbg(emu->card->dev, "reg2 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
- snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
+ dev_info(emu->card->dev,
+ "emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
- snd_printk(KERN_INFO "emu1010: EMU_HANA_ID = 0x%x\n", reg);
+ dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg);
if (!emu->firmware) {
const char *filename;
@@ -880,16 +888,19 @@
err = request_firmware(&emu->firmware, filename, &emu->pci->dev);
if (err != 0) {
- snd_printk(KERN_ERR "emu1010: firmware: %s not found. Err = %d\n", filename, err);
+ dev_info(emu->card->dev,
+ "emu1010: firmware: %s not found. Err = %d\n",
+ filename, err);
return err;
}
- snd_printk(KERN_INFO "emu1010: firmware file = %s, size = 0x%zx\n",
+ dev_info(emu->card->dev,
+ "emu1010: firmware file = %s, size = 0x%zx\n",
filename, emu->firmware->size);
}
err = snd_emu1010_load_firmware(emu, emu->firmware);
if (err != 0) {
- snd_printk(KERN_INFO "emu1010: Loading Firmware failed\n");
+ dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n");
return err;
}
@@ -897,21 +908,23 @@
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
- snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n", reg);
+ dev_info(emu->card->dev,
+ "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n",
+ reg);
return -ENODEV;
}
- snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n");
+ dev_info(emu->card->dev, "emu1010: Hana Firmware loaded\n");
snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp);
snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2);
- snd_printk(KERN_INFO "emu1010: Hana version: %u.%u\n", tmp, tmp2);
+ dev_info(emu->card->dev, "emu1010: Hana version: %u.%u\n", tmp, tmp2);
/* Enable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
- snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+ dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
- snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+ dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp);
/* Optical -> ADAT I/O */
/* 0 : SPDIF
@@ -950,7 +963,7 @@
snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
- snd_printk(KERN_INFO "emu1010: Card options3 = 0x%x\n", reg);
+ dev_info(emu->card->dev, "emu1010: Card options3 = 0x%x\n", reg);
/* Default WCLK set to 48kHz. */
snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00);
/* Word Clock source, Internal 48kHz x1 */
@@ -1808,7 +1821,9 @@
emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
- snd_printdd("vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n", pci->vendor, pci->device, emu->serial, emu->model);
+ dev_dbg(card->dev,
+ "vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n",
+ pci->vendor, pci->device, emu->serial, emu->model);
for (c = emu_chip_details; c->vendor; c++) {
if (c->vendor == pci->vendor && c->device == pci->device) {
@@ -1827,21 +1842,21 @@
}
}
if (c->vendor == 0) {
- snd_printk(KERN_ERR "emu10k1: Card not recognised\n");
+ dev_err(card->dev, "emu10k1: Card not recognised\n");
kfree(emu);
pci_disable_device(pci);
return -ENOENT;
}
emu->card_capabilities = c;
if (c->subsystem && !subsystem)
- snd_printdd("Sound card name = %s\n", c->name);
+ dev_dbg(card->dev, "Sound card name = %s\n", c->name);
else if (subsystem)
- snd_printdd("Sound card name = %s, "
+ dev_dbg(card->dev, "Sound card name = %s, "
"vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
"Forced to subsystem = 0x%x\n", c->name,
pci->vendor, pci->device, emu->serial, c->subsystem);
else
- snd_printdd("Sound card name = %s, "
+ dev_dbg(card->dev, "Sound card name = %s, "
"vendor = 0x%x, device = 0x%x, subsystem = 0x%x.\n",
c->name, pci->vendor, pci->device,
emu->serial);
@@ -1869,7 +1884,9 @@
emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
- snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask);
+ dev_err(card->dev,
+ "architecture does not support PCI busmaster DMA with mask 0x%lx\n",
+ emu->dma_mask);
kfree(emu);
pci_disable_device(pci);
return -ENXIO;