drm/i915/bdw: Create a separate BDW rps enable
This is mostly what we have for HSW with the exceptions of:
no writes:
GEN6_RC1_WAKE_RATE_LIMIT
GEN6_RC6pp_WAKE_RATE_LIMIT
GEN6_RC1e_THRESHOLD
GEN6_RC6p_THRESHOLD
GEN6_RC6pp_THRESHOLD
GEN6_RP_DOWN_TIMEOUT - use 1s instead of 1.28s
Don't try to overclock, or program ring/IA frequency tables since we
don't quite have sufficient docs yet.
NOTE: These values do not reflect the changes made recently by Chris.
Since we have no evidence yet what the proper way to tweak for this
platform is, I think it is good to go, and can be optimized by Chris, or
whomever, later.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Drop spurious hunk and drop TODO - having per-platform rps
register frobbing code is in my opinion preferred, now that all the
infrastructure functions are extracted.]
Reviewed-by: Jesse Barnes <jbarnes@virtuosugeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 9965846..a35ebcf 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3762,6 +3762,78 @@
I915_WRITE(GEN6_PMINTRMSK, ~enabled_intrs);
}
+static void gen8_enable_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_ring_buffer *ring;
+ uint32_t rc6_mask = 0, rp_state_cap;
+ int unused;
+
+ /* 1a: Software RC state - RC0 */
+ I915_WRITE(GEN6_RC_STATE, 0);
+
+ /* 1c & 1d: Get forcewake during program sequence. Although the driver
+ * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
+ gen6_gt_force_wake_get(dev_priv);
+
+ /* 2a: Disable RC states. */
+ I915_WRITE(GEN6_RC_CONTROL, 0);
+
+ rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+
+ /* 2b: Program RC6 thresholds.*/
+ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
+ I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
+ I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
+ for_each_ring(ring, dev_priv, unused)
+ I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
+ I915_WRITE(GEN6_RC_SLEEP, 0);
+ I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
+
+ /* 3: Enable RC6 */
+ if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE)
+ rc6_mask = GEN6_RC_CTL_RC6_ENABLE;
+ DRM_INFO("RC6 %s\n", (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off");
+ I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE |
+ GEN6_RC_CTL_EI_MODE(1) |
+ rc6_mask);
+
+ /* 4 Program defaults and thresholds for RPS*/
+ I915_WRITE(GEN6_RPNSWREQ, HSW_FREQUENCY(10)); /* Request 500 MHz */
+ I915_WRITE(GEN6_RC_VIDEO_FREQ, HSW_FREQUENCY(12)); /* Request 600 MHz */
+ /* NB: Docs say 1s, and 1000000 - which aren't equivalent */
+ I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */
+
+ /* Docs recommend 900MHz, and 300 MHz respectively */
+ I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+ dev_priv->rps.max_delay << 24 |
+ dev_priv->rps.min_delay << 16);
+
+ I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/
+ I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */
+ I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */
+
+ I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
+
+ /* 5: Enable RPS */
+ I915_WRITE(GEN6_RP_CONTROL,
+ GEN6_RP_MEDIA_TURBO |
+ GEN6_RP_MEDIA_HW_NORMAL_MODE |
+ GEN6_RP_MEDIA_IS_GFX |
+ GEN6_RP_ENABLE |
+ GEN6_RP_UP_BUSY_AVG |
+ GEN6_RP_DOWN_IDLE_AVG);
+
+ /* 6: Ring frequency + overclocking (our driver does this later */
+
+ gen6_set_rps(dev, (I915_READ(GEN6_GT_PERF_STATUS) & 0xff00) >> 8);
+
+ gen6_enable_rps_interrupts(dev);
+
+ gen6_gt_force_wake_put(dev_priv);
+}
+
static void gen6_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4891,6 +4963,9 @@
if (IS_VALLEYVIEW(dev)) {
valleyview_enable_rps(dev);
+ } else if (IS_BROADWELL(dev)) {
+ gen8_enable_rps(dev);
+ gen6_update_ring_freq(dev);
} else {
gen6_enable_rps(dev);
gen6_update_ring_freq(dev);