b43: N-PHY: implement TX power control coef setup
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index f982f56..a0e8283 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -659,6 +659,73 @@
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
+static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+ int i, j;
+ u32 tmp;
+ u32 cur_real, cur_imag, real_part, imag_part;
+
+ u16 buffer[7];
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, true);
+
+ /* TODO: Read an N PHY Table with ID 15, length 7, offset 80,
+ width 16, and data pointer buffer */
+
+ for (i = 0; i < 2; i++) {
+ tmp = ((buffer[i * 2] & 0x3FF) << 10) |
+ (buffer[i * 2 + 1] & 0x3FF);
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+ (((i + 26) << 10) | 320));
+ for (j = 0; j < 128; j++) {
+ b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+ ((tmp >> 16) & 0xFFFF));
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+ (tmp & 0xFFFF));
+ }
+ }
+
+ for (i = 0; i < 2; i++) {
+ tmp = buffer[5 + i];
+ real_part = (tmp >> 8) & 0xFF;
+ imag_part = (tmp & 0xFF);
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+ (((i + 26) << 10) | 448));
+
+ if (dev->phy.rev >= 3) {
+ cur_real = real_part;
+ cur_imag = imag_part;
+ tmp = ((cur_real & 0xFF) << 8) | (cur_imag & 0xFF);
+ }
+
+ for (j = 0; j < 128; j++) {
+ if (dev->phy.rev < 3) {
+ cur_real = (real_part * loscale[j] + 128) >> 8;
+ cur_imag = (imag_part * loscale[j] + 128) >> 8;
+ tmp = ((cur_real & 0xFF) << 8) |
+ (cur_imag & 0xFF);
+ }
+ b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+ ((tmp >> 16) & 0xFFFF));
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+ (tmp & 0xFFFF));
+ }
+ }
+
+ if (dev->phy.rev >= 3) {
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_NPHY_TXPWR_INDX0, 0xFFFF);
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_NPHY_TXPWR_INDX1, 0xFFFF);
+ }
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, false);
+}
+
enum b43_nphy_rf_sequence {
B43_RFSEQ_RX2TX,
B43_RFSEQ_TX2RX,
@@ -2040,7 +2107,7 @@
b43_nphy_restore_cal(dev);
}
- /* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
+ b43_nphy_tx_pwr_ctrl_coef_setup(dev);
/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);