NFC: pn533: Fix quoted strings split across lines
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 1016e09..4397061 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -515,13 +515,13 @@
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with"
- " status: %d", urb->status);
+ nfc_dev_dbg(&dev->interface->dev,
+ "Urb shutting down with status: %d", urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
default:
- nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:"
- " %d", urb->status);
+ nfc_dev_err(&dev->interface->dev,
+ "Nonzero urb status received: %d", urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
}
@@ -538,8 +538,8 @@
}
if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) {
- nfc_dev_err(&dev->interface->dev, "The received frame is not "
- "response to the last command");
+ nfc_dev_err(&dev->interface->dev,
+ "It it not the response to the last command");
dev->wq_in_error = -EIO;
goto sched_wq;
}
@@ -572,13 +572,13 @@
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with"
- " status: %d", urb->status);
+ nfc_dev_dbg(&dev->interface->dev,
+ "Urb shutting down with status: %d", urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
default:
- nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:"
- " %d", urb->status);
+ nfc_dev_err(&dev->interface->dev,
+ "Nonzero urb status received: %d", urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
}
@@ -595,8 +595,8 @@
rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC);
if (rc) {
- nfc_dev_err(&dev->interface->dev, "usb_submit_urb failed with"
- " result %d", rc);
+ nfc_dev_err(&dev->interface->dev,
+ "usb_submit_urb failed with result %d", rc);
dev->wq_in_error = rc;
goto sched_wq;
}
@@ -1044,12 +1044,12 @@
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with"
- " status: %d", urb->status);
+ nfc_dev_dbg(&dev->interface->dev,
+ "Urb shutting down with status: %d", urb->status);
break;
default:
- nfc_dev_dbg(&dev->interface->dev, "Nonzero urb status received:"
- " %d", urb->status);
+ nfc_dev_dbg(&dev->interface->dev,
+ "Nonzero urb status received: %d", urb->status);
}
}
@@ -1753,8 +1753,8 @@
del_timer(&dev->listen_timer);
if (!dev->poll_mod_count) {
- nfc_dev_dbg(&dev->interface->dev, "Polling operation was not"
- " running");
+ nfc_dev_dbg(&dev->interface->dev,
+ "Polling operation was not running");
return;
}
@@ -1813,35 +1813,35 @@
protocol);
if (dev->poll_mod_count) {
- nfc_dev_err(&dev->interface->dev, "Cannot activate while"
- " polling");
+ nfc_dev_err(&dev->interface->dev,
+ "Cannot activate while polling");
return -EBUSY;
}
if (dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev, "There is already an active"
- " target");
+ nfc_dev_err(&dev->interface->dev,
+ "There is already an active target");
return -EBUSY;
}
if (!dev->tgt_available_prots) {
- nfc_dev_err(&dev->interface->dev, "There is no available target"
- " to activate");
+ nfc_dev_err(&dev->interface->dev,
+ "There is no available target to activate");
return -EINVAL;
}
if (!(dev->tgt_available_prots & (1 << protocol))) {
- nfc_dev_err(&dev->interface->dev, "The target does not support"
- " the requested protocol %u", protocol);
+ nfc_dev_err(&dev->interface->dev,
+ "Target doesn't support requested proto %u",
+ protocol);
return -EINVAL;
}
if (protocol == NFC_PROTO_NFC_DEP) {
rc = pn533_activate_target_nfcdep(dev);
if (rc) {
- nfc_dev_err(&dev->interface->dev, "Error %d when"
- " activating target with"
- " NFC_DEP protocol", rc);
+ nfc_dev_err(&dev->interface->dev,
+ "Activating target with DEP failed %d", rc);
return rc;
}
}
@@ -1884,8 +1884,8 @@
rc = resp->data[0] & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS)
- nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing"
- " the target", rc);
+ nfc_dev_err(&dev->interface->dev,
+ "Error 0x%x when releasing the target", rc);
dev_kfree_skb(resp);
return;
@@ -2181,8 +2181,8 @@
}
if (!dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev, "Cannot exchange data if"
- " there is no active target");
+ nfc_dev_err(&dev->interface->dev,
+ "Can't exchange data if there is no active target");
rc = -EINVAL;
goto error;
}
@@ -2522,8 +2522,8 @@
}
if (!in_endpoint || !out_endpoint) {
- nfc_dev_err(&interface->dev, "Could not find bulk-in or"
- " bulk-out endpoint");
+ nfc_dev_err(&interface->dev,
+ "Could not find bulk-in or bulk-out endpoint");
rc = -ENODEV;
goto error;
}