ASoC: meson: add reset binding
The g12a audio subsystem, which is a derivative of the axg subsystem,
provides a dedicated reset line for each of the audio components.
The axg did not provide that and it is unclear if/when these reset are
required. The reset already helped solve a channel mapping issue on the
tdm formatter devices. Let's add the reset binding for the other
components, so we can describe this in DT. We'll use it later on
in the driver when/if needed.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
index 4b17073..3080979 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
@@ -12,7 +12,10 @@
- interrupts: interrupt specifier for the fifo.
- clocks: phandle to the fifo peripheral clock provided by the audio
clock controller.
-- resets: phandle to memory ARB line provided by the arb reset controller.
+- resets: list of reset phandle, one for each entry reset-names.
+- reset-names: should contain the following:
+ * "arb" : memory ARB line (required)
+ * "rst" : dedicated device reset line (optional)
- #sound-dai-cells: must be 0.
Example of FRDDR A on the A113 SoC:
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
index b3f0979..7168781 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
@@ -13,6 +13,9 @@
* "sysclk" : dsp system clock
- #sound-dai-cells: must be 0.
+Optional property:
+- resets: phandle to the dedicated reset line of the pdm input.
+
Example of PDM on the A113 SoC:
pdm: audio-controller@ff632000 {
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
index 62e5bca..df92a4e 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -11,6 +11,9 @@
* "refclk" : spdif input reference clock
- #sound-dai-cells: must be 0.
+Optional property:
+- resets: phandle to the dedicated reset line of the spdif input.
+
Example on the A113 SoC:
spdifin: audio-controller@400 {
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
index d38aa35..28381dd 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
@@ -10,6 +10,9 @@
* "mclk" : master clock
- #sound-dai-cells: must be 0.
+Optional property:
+- resets: phandle to the dedicated reset line of the spdif output.
+
Example on the A113 SoC:
spdifout: audio-controller@480 {
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
index 173a950..4e8cd7e 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
@@ -6,6 +6,7 @@
- reg: physical base address of the controller and length of memory
mapped region.
- #sound-dai-cells: should be 1.
+- resets: phandle to the dedicated reset line of the hdmitx glue.
Example on the S905X2 SoC:
@@ -13,6 +14,7 @@
compatible = "amlogic,g12a-tohdmitx";
reg = <0x0 0x744 0x0 0x4>;
#sound-dai-cells = <1>;
+ resets = <&clkc_audio AUD_RESET_TOHDMITX>;
};
Example of an 'amlogic,axg-sound-card':