arm64: dts: ls1028a: move PHY nodes to MDIO controller
Move the PHY nodes from the network controller to the dedicated MDIO
controller. According to Vladimir Oltean direct MDIO access via the PF,
that is when the PHY is put under the "mdio" subnode, is defeatured and
in fact the latest reference manual isn't mentioning it anymore.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 2c62669..b3e9c49 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -2,7 +2,7 @@
/*
* Device Tree file for the Kontron SMARC-sAL28 board.
*
- * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
*
*/
@@ -80,22 +80,19 @@ &duart1 {
status = "okay";
};
+&enetc_mdio_pf3 {
+ phy0: ethernet-phy@5 {
+ reg = <0x5>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+ };
+};
+
&enetc_port0 {
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
managed = "in-band-status";
status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy@5 {
- reg = <0x5>;
- eee-broken-1000t;
- eee-broken-100tx;
- };
- };
};
&esdhc {