drm/i915: Rewrite fb rotation GTT handling
Redo the fb rotation handling in order to:
- eliminate the NV12 special casing
- handle fb->offsets[] properly
- make the rotation handling easier for the plane code
To achieve these goals we reduce intel_rotation_info to only contain
(for each plane) the rotated view width,height,stride in tile units,
and the page offset into the object where the plane starts. Each plane
is handled exactly the same way, no special casing for NV12 or other
formats. We then store the computed rotation_info under
intel_framebuffer so that we don't have to recompute it again.
To handle fb->offsets[] we treat them as a linear offsets and convert
them to x/y offsets from the start of the relevant GTT mapping (either
normal or rotated). We store the x/y offsets under intel_framebuffer,
and for some extra convenience we also store the rotated pitch (ie.
tile aligned plane height). So for each plane we have the normal
x/y offsets, rotated x/y offsets, and the rotated pitch. The normal
pitch is available already in fb->pitches[].
While we're gathering up all that extra information, we can also easily
compute the storage requirements for the framebuffer, so that we can
check that the object is big enough to hold it.
When it comes time to deal with the plane source coordinates, we first
rotate the clipped src coordinates to match the relevant GTT view
orientation, then add to them the fb x/y offsets. Next we compute
the aligned surface page offset, and as a result we're left with some
residual x/y offsets. Finally, if required by the hardware, we convert
the remaining x/y offsets into a linear offset.
For gen2/3 we simply skip computing the final page offset, and just
convert the src+fb x/y offsets directly into a linear offset since
that's what the hardware wants.
After this all platforms, incluing SKL+, compute these things in exactly
the same way (excluding alignemnt differences).
v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating
plane src coordinates
Drop some spurious changes that got left behind during
development
v3: Split out more changes to prep patches (Daniel)
s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity
Rename intel_surf_gtt_offset to intel_fb_gtt_offset
Kill the pointless 'plane' parameter from intel_fb_gtt_offset()
v4: Fix alignment vs. alignment-1 when calling
_intel_compute_tile_offset() from intel_fill_fb_info()
Pass the pitch in tiles in
stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info()
Pass the full width/height of the rotated area to
drm_rect_rotate() for clarity
Use u32 for more offsets
v5: Preserve the upper_32_bits()/lower_32_bits() handling for the
fb ggtt offset (Sivakumar)
v6: Rebase due to drm_plane_state src/dst rects
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c050906..7c61ab4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2147,33 +2147,6 @@
}
}
-static void
-intel_fill_fb_info(struct drm_i915_private *dev_priv,
- struct drm_framebuffer *fb)
-{
- struct intel_rotation_info *info = &to_intel_framebuffer(fb)->rot_info;
- unsigned int tile_size, tile_width, tile_height, cpp;
-
- tile_size = intel_tile_size(dev_priv);
-
- cpp = drm_format_plane_cpp(fb->pixel_format, 0);
- intel_tile_dims(dev_priv, &tile_width, &tile_height,
- fb->modifier[0], cpp);
-
- info->plane[0].width = DIV_ROUND_UP(fb->pitches[0], tile_width * cpp);
- info->plane[0].height = DIV_ROUND_UP(fb->height, tile_height);
-
- if (info->pixel_format == DRM_FORMAT_NV12) {
- cpp = drm_format_plane_cpp(fb->pixel_format, 1);
- intel_tile_dims(dev_priv, &tile_width, &tile_height,
- fb->modifier[1], cpp);
-
- info->uv_offset = fb->offsets[1];
- info->plane[1].width = DIV_ROUND_UP(fb->pitches[1], tile_width * cpp);
- info->plane[1].height = DIV_ROUND_UP(fb->height / 2, tile_height);
- }
-}
-
static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
{
if (INTEL_INFO(dev_priv)->gen >= 9)
@@ -2295,6 +2268,42 @@
}
/*
+ * Convert the x/y offsets into a linear offset.
+ * Only valid with 0/180 degree rotation, which is fine since linear
+ * offset is only used with linear buffers on pre-hsw and tiled buffers
+ * with gen2/3, and 90/270 degree rotations isn't supported on any of them.
+ */
+u32 intel_fb_xy_to_linear(int x, int y,
+ const struct drm_framebuffer *fb, int plane)
+{
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
+ unsigned int pitch = fb->pitches[plane];
+
+ return y * pitch + x * cpp;
+}
+
+/*
+ * Add the x/y offsets derived from fb->offsets[] to the user
+ * specified plane src x/y offsets. The resulting x/y offsets
+ * specify the start of scanout from the beginning of the gtt mapping.
+ */
+void intel_add_fb_offsets(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int rotation)
+
+{
+ const struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+ if (intel_rotation_90_or_270(rotation)) {
+ *x += intel_fb->rotated[plane].x;
+ *y += intel_fb->rotated[plane].y;
+ } else {
+ *x += intel_fb->normal[plane].x;
+ *y += intel_fb->normal[plane].y;
+ }
+}
+
+/*
* Adjust the tile offset by moving the difference into
* the x/y offsets.
*
@@ -2330,18 +2339,24 @@
* In the 90/270 rotated case, x and y are assumed
* to be already rotated to match the rotated GTT view, and
* pitch is the tile_height aligned framebuffer height.
+ *
+ * This function is used when computing the derived information
+ * under intel_framebuffer, so using any of that information
+ * here is not allowed. Anything under drm_framebuffer can be
+ * used. This is why the user has to pass in the pitch since it
+ * is specified in the rotated orientation.
*/
-u32 intel_compute_tile_offset(int *x, int *y,
- const struct drm_framebuffer *fb, int plane,
- unsigned int pitch,
- unsigned int rotation)
+static u32 _intel_compute_tile_offset(const struct drm_i915_private *dev_priv,
+ int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int pitch,
+ unsigned int rotation,
+ u32 alignment)
{
- const struct drm_i915_private *dev_priv = to_i915(fb->dev);
uint64_t fb_modifier = fb->modifier[plane];
unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
- u32 offset, offset_aligned, alignment;
+ u32 offset, offset_aligned;
- alignment = intel_surf_alignment(dev_priv, fb_modifier);
if (alignment)
alignment--;
@@ -2383,6 +2398,141 @@
return offset_aligned;
}
+u32 intel_compute_tile_offset(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int pitch,
+ unsigned int rotation)
+{
+ const struct drm_i915_private *dev_priv = to_i915(fb->dev);
+ u32 alignment = intel_surf_alignment(dev_priv, fb->modifier[plane]);
+
+ return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
+ rotation, alignment);
+}
+
+/* Convert the fb->offset[] linear offset into x/y offsets */
+static void intel_fb_offset_to_xy(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane)
+{
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
+ unsigned int pitch = fb->pitches[plane];
+ u32 linear_offset = fb->offsets[plane];
+
+ *y = linear_offset / pitch;
+ *x = linear_offset % pitch / cpp;
+}
+
+static int
+intel_fill_fb_info(struct drm_i915_private *dev_priv,
+ struct drm_framebuffer *fb)
+{
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *rot_info = &intel_fb->rot_info;
+ u32 gtt_offset_rotated = 0;
+ unsigned int max_size = 0;
+ uint32_t format = fb->pixel_format;
+ int i, num_planes = drm_format_num_planes(format);
+ unsigned int tile_size = intel_tile_size(dev_priv);
+
+ for (i = 0; i < num_planes; i++) {
+ unsigned int width, height;
+ unsigned int cpp, size;
+ u32 offset;
+ int x, y;
+
+ cpp = drm_format_plane_cpp(format, i);
+ width = drm_format_plane_width(fb->width, format, i);
+ height = drm_format_plane_height(fb->height, format, i);
+
+ intel_fb_offset_to_xy(&x, &y, fb, i);
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the normal gtt mapping.
+ */
+ intel_fb->normal[i].x = x;
+ intel_fb->normal[i].y = y;
+
+ offset = _intel_compute_tile_offset(dev_priv, &x, &y,
+ fb, 0, fb->pitches[i],
+ BIT(DRM_ROTATE_0), tile_size);
+ offset /= tile_size;
+
+ if (fb->modifier[i] != DRM_FORMAT_MOD_NONE) {
+ unsigned int tile_width, tile_height;
+ unsigned int pitch_tiles;
+ struct drm_rect r;
+
+ intel_tile_dims(dev_priv, &tile_width, &tile_height,
+ fb->modifier[i], cpp);
+
+ rot_info->plane[i].offset = offset;
+ rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
+ rot_info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
+ rot_info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
+
+ intel_fb->rotated[i].pitch =
+ rot_info->plane[i].height * tile_height;
+
+ /* how many tiles does this plane need */
+ size = rot_info->plane[i].stride * rot_info->plane[i].height;
+ /*
+ * If the plane isn't horizontally tile aligned,
+ * we need one more tile.
+ */
+ if (x != 0)
+ size++;
+
+ /* rotate the x/y offsets to match the GTT view */
+ r.x1 = x;
+ r.y1 = y;
+ r.x2 = x + width;
+ r.y2 = y + height;
+ drm_rect_rotate(&r,
+ rot_info->plane[i].width * tile_width,
+ rot_info->plane[i].height * tile_height,
+ BIT(DRM_ROTATE_270));
+ x = r.x1;
+ y = r.y1;
+
+ /* rotate the tile dimensions to match the GTT view */
+ pitch_tiles = intel_fb->rotated[i].pitch / tile_height;
+ swap(tile_width, tile_height);
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y, tile_size,
+ tile_width, tile_height, pitch_tiles,
+ gtt_offset_rotated * tile_size, 0);
+
+ gtt_offset_rotated += rot_info->plane[i].width * rot_info->plane[i].height;
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the rotated gtt mapping.
+ */
+ intel_fb->rotated[i].x = x;
+ intel_fb->rotated[i].y = y;
+ } else {
+ size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
+ x * cpp, tile_size);
+ }
+
+ /* how many tiles in total needed in the bo */
+ max_size = max(max_size, offset + size);
+ }
+
+ if (max_size * tile_size > to_intel_framebuffer(fb)->obj->base.size) {
+ DRM_DEBUG("fb too big for bo (need %u bytes, have %zu bytes)\n",
+ max_size * tile_size, to_intel_framebuffer(fb)->obj->base.size);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int i9xx_format_to_fourcc(int format)
{
switch (format) {
@@ -2618,7 +2768,6 @@
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
int x = plane_state->src.x1 >> 16;
int y = plane_state->src.y1 >> 16;
@@ -2677,30 +2826,25 @@
if (IS_G4X(dev))
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
- if (INTEL_INFO(dev)->gen >= 4) {
+ if (INTEL_INFO(dev)->gen >= 4)
intel_crtc->dspaddr_offset =
intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= intel_crtc->dspaddr_offset;
- } else {
- intel_crtc->dspaddr_offset = linear_offset;
- }
if (rotation == BIT(DRM_ROTATE_180)) {
dspcntr |= DISPPLANE_ROTATE_180;
x += (crtc_state->pipe_src_w - 1);
y += (crtc_state->pipe_src_h - 1);
-
- /* Finding the last pixel of the last line of the display
- data and adding to linear_offset*/
- linear_offset +=
- (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
- (crtc_state->pipe_src_w - 1) * cpp;
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
+ if (INTEL_INFO(dev)->gen < 4)
+ intel_crtc->dspaddr_offset = linear_offset;
+
intel_crtc->adjusted_x = x;
intel_crtc->adjusted_y = y;
@@ -2709,7 +2853,8 @@
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
if (INTEL_INFO(dev)->gen >= 4) {
I915_WRITE(DSPSURF(plane),
- i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_fb_gtt_offset(fb, rotation) +
+ intel_crtc->dspaddr_offset);
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
I915_WRITE(DSPLINOFF(plane), linear_offset);
} else
@@ -2747,7 +2892,6 @@
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
int x = plane_state->src.x1 >> 16;
int y = plane_state->src.y1 >> 16;
@@ -2786,26 +2930,23 @@
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
+
intel_crtc->dspaddr_offset =
intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= intel_crtc->dspaddr_offset;
+
if (rotation == BIT(DRM_ROTATE_180)) {
dspcntr |= DISPPLANE_ROTATE_180;
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
x += (crtc_state->pipe_src_w - 1);
y += (crtc_state->pipe_src_h - 1);
-
- /* Finding the last pixel of the last line of the display
- data and adding to linear_offset*/
- linear_offset +=
- (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
- (crtc_state->pipe_src_w - 1) * cpp;
}
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
intel_crtc->adjusted_x = x;
intel_crtc->adjusted_y = y;
@@ -2813,7 +2954,8 @@
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
I915_WRITE(DSPSURF(plane),
- i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_fb_gtt_offset(fb, rotation) +
+ intel_crtc->dspaddr_offset);
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
} else {
@@ -2835,28 +2977,16 @@
}
}
-u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
- struct drm_i915_gem_object *obj,
- unsigned int plane)
+u32 intel_fb_gtt_offset(struct drm_framebuffer *fb,
+ unsigned int rotation)
{
+ struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct i915_ggtt_view view;
- struct i915_vma *vma;
u64 offset;
- intel_fill_fb_ggtt_view(&view, intel_plane->base.state->fb,
- intel_plane->base.state->rotation);
+ intel_fill_fb_ggtt_view(&view, fb, rotation);
- vma = i915_gem_obj_to_ggtt_view(obj, &view);
- if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
- view.type))
- return -1;
-
- offset = vma->node.start;
-
- if (plane == 1) {
- offset += vma->ggtt_view.params.rotated.uv_start_page *
- PAGE_SIZE;
- }
+ offset = i915_gem_obj_ggtt_offset_view(obj, &view);
WARN_ON(upper_32_bits(offset));
@@ -2979,12 +3109,9 @@
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_framebuffer *fb = plane_state->base.fb;
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
int pipe = intel_crtc->pipe;
u32 plane_ctl, stride_div, stride;
- u32 tile_height, plane_offset, plane_size;
unsigned int rotation = plane_state->base.rotation;
- int x_offset, y_offset;
u32 surf_addr;
int scaler_id = plane_state->scaler_id;
int src_x = plane_state->src.x1 >> 16;
@@ -3005,36 +3132,49 @@
plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
plane_ctl |= skl_plane_ctl_rotation(rotation);
- stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
- fb->pixel_format);
- surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
-
- WARN_ON(drm_rect_width(&plane_state->src) == 0);
-
if (intel_rotation_90_or_270(rotation)) {
+ struct drm_rect r = {
+ .x1 = src_x,
+ .x2 = src_x + src_w,
+ .y1 = src_y,
+ .y2 = src_y + src_h,
+ };
int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- /* stride = Surface height in tiles */
- tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
- stride = DIV_ROUND_UP(fb->height, tile_height);
- x_offset = stride * tile_height - src_y - src_h;
- y_offset = src_x;
- plane_size = (src_w - 1) << 16 | (src_h - 1);
+ /* Rotate src coordinates to match rotated GTT view */
+ drm_rect_rotate(&r, fb->width, fb->height, BIT(DRM_ROTATE_270));
+
+ src_x = r.x1;
+ src_y = r.y1;
+ src_w = drm_rect_width(&r);
+ src_h = drm_rect_height(&r);
+
+ stride_div = intel_tile_height(dev_priv, fb->modifier[0], cpp);
+ stride = intel_fb->rotated[0].pitch;
} else {
- stride = fb->pitches[0] / stride_div;
- x_offset = src_x;
- y_offset = src_y;
- plane_size = (src_h - 1) << 16 | (src_w - 1);
+ stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+ fb->pixel_format);
+ stride = fb->pitches[0];
}
- plane_offset = y_offset << 16 | x_offset;
- intel_crtc->adjusted_x = x_offset;
- intel_crtc->adjusted_y = y_offset;
+ intel_add_fb_offsets(&src_x, &src_y, fb, 0, rotation);
+ surf_addr = intel_compute_tile_offset(&src_x, &src_y, fb, 0,
+ stride, rotation);
+
+ /* Sizes are 0 based */
+ src_w--;
+ src_h--;
+ dst_w--;
+ dst_h--;
+
+ intel_crtc->adjusted_x = src_x;
+ intel_crtc->adjusted_y = src_y;
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
- I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
- I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
- I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+ I915_WRITE(PLANE_OFFSET(pipe, 0), (src_y << 16) | src_x);
+ I915_WRITE(PLANE_STRIDE(pipe, 0), stride / stride_div);
+ I915_WRITE(PLANE_SIZE(pipe, 0), (src_h << 16) | src_w);
if (scaler_id >= 0) {
uint32_t ps_ctrl = 0;
@@ -3051,7 +3191,8 @@
I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
}
- I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
+ I915_WRITE(PLANE_SURF(pipe, 0),
+ intel_fb_gtt_offset(fb, rotation) + surf_addr);
POSTING_READ(PLANE_SURF(pipe, 0));
}
@@ -11462,7 +11603,7 @@
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
const enum pipe pipe = intel_crtc->pipe;
- u32 ctl, stride, tile_height;
+ u32 ctl, stride;
ctl = I915_READ(PLANE_CTL(pipe, 0));
ctl &= ~PLANE_CTL_TILED_MASK;
@@ -11487,9 +11628,11 @@
* linear buffers or in number of tiles for tiled buffers.
*/
if (intel_rotation_90_or_270(rotation)) {
- /* stride = Surface height in tiles */
- tile_height = intel_tile_height(dev_priv, fb->modifier[0], 0);
- stride = DIV_ROUND_UP(fb->height, tile_height);
+ int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+ stride = intel_fb->rotated[0].pitch /
+ intel_tile_height(dev_priv, fb->modifier[0], cpp);
} else {
stride = fb->pitches[0] /
intel_fb_stride_alignment(dev_priv, fb->modifier[0],
@@ -11769,8 +11912,7 @@
if (ret)
goto cleanup_pending;
- work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
- obj, 0);
+ work->gtt_offset = intel_fb_gtt_offset(fb, primary->state->rotation);
work->gtt_offset += intel_crtc->dspaddr_offset;
work->rotation = crtc->primary->state->rotation;
@@ -15040,7 +15182,6 @@
struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(dev);
- unsigned int aligned_height;
int ret;
u32 pitch_limit, stride_alignment;
@@ -15166,17 +15307,12 @@
if (mode_cmd->offsets[0] != 0)
return -EINVAL;
- aligned_height = intel_fb_align_height(dev, mode_cmd->height,
- mode_cmd->pixel_format,
- mode_cmd->modifier[0]);
- /* FIXME drm helper for size checks (especially planar formats)? */
- if (obj->base.size < aligned_height * mode_cmd->pitches[0])
- return -EINVAL;
-
drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
intel_fb->obj = obj;
- intel_fill_fb_info(dev_priv, &intel_fb->base);
+ ret = intel_fill_fb_info(dev_priv, &intel_fb->base);
+ if (ret)
+ return ret;
ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
if (ret) {