Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7.
Conflicts:
scripts/mod/file2alias.c
This change is wrong on many levels. First and foremost, it causes a
regression. On boot on Assabet, which this patch gives a codec id of
'ucb1x00', it gives:
ucb1x00 ID not found: 1005
0x1005 is a valid ID for the UCB1300 device.
Secondly, this patch is way over the top in terms of complexity. The
only device which has been seen to be connected with this MCP code is
the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same
driver. Adding a match table, requiring the codec string to match the
hardware ID read out of the ID register, etc is completely over the top
when we can just read the hardware ID register.
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 91c4f25..b281217 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -36,15 +36,6 @@
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
-static struct mcp_device_id ucb1x00_id[] = {
- { "ucb1x00", 0 }, /* auto-detection */
- { "ucb1200", UCB_ID_1200 },
- { "ucb1300", UCB_ID_1300 },
- { "tc35143", UCB_ID_TC35143 },
- { }
-};
-MODULE_DEVICE_TABLE(mcp, ucb1x00_id);
-
/**
* ucb1x00_io_set_dir - set IO direction
* @ucb: UCB1x00 structure describing chip
@@ -536,33 +527,17 @@
static int ucb1x00_probe(struct mcp *mcp)
{
- const struct mcp_device_id *mid;
struct ucb1x00 *ucb;
struct ucb1x00_driver *drv;
- struct ucb1x00_plat_data *pdata;
unsigned int id;
int ret = -ENODEV;
int temp;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
- mid = mcp_get_device_id(mcp);
- if (mid && mid->driver_data) {
- if (id != mid->driver_data) {
- printk(KERN_WARNING "%s wrong ID %04x found: %04x\n",
- mid->name, (unsigned int) mid->driver_data, id);
- goto err_disable;
- }
- } else {
- mid = &ucb1x00_id[1];
- while (mid->driver_data) {
- if (id == mid->driver_data)
- break;
- mid++;
- }
- printk(KERN_WARNING "%s ID not found: %04x\n",
- ucb1x00_id[0].name, id);
+ if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
+ printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto err_disable;
}
@@ -571,28 +546,28 @@
if (!ucb)
goto err_disable;
- pdata = mcp->attached_device.platform_data;
+
ucb->dev.class = &ucb1x00_class;
ucb->dev.parent = &mcp->attached_device;
- dev_set_name(&ucb->dev, mid->name);
+ dev_set_name(&ucb->dev, "ucb1x00");
spin_lock_init(&ucb->lock);
spin_lock_init(&ucb->io_lock);
sema_init(&ucb->adc_sem, 1);
- ucb->id = mid;
+ ucb->id = id;
ucb->mcp = mcp;
ucb->irq = ucb1x00_detect_irq(ucb);
if (ucb->irq == NO_IRQ) {
- printk(KERN_ERR "%s: IRQ probe failed\n", mid->name);
+ printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
ret = -ENODEV;
goto err_free;
}
ucb->gpio.base = -1;
- if (pdata && (pdata->gpio_base >= 0)) {
+ if (mcp->gpio_base != 0) {
ucb->gpio.label = dev_name(&ucb->dev);
- ucb->gpio.base = pdata->gpio_base;
+ ucb->gpio.base = mcp->gpio_base;
ucb->gpio.ngpio = 10;
ucb->gpio.set = ucb1x00_gpio_set;
ucb->gpio.get = ucb1x00_gpio_get;
@@ -605,10 +580,10 @@
dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
- mid->name, ucb);
+ "UCB1x00", ucb);
if (ret) {
- printk(KERN_ERR "%s: unable to grab irq%d: %d\n",
- mid->name, ucb->irq, ret);
+ printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+ ucb->irq, ret);
goto err_gpio;
}
@@ -730,7 +705,6 @@
.remove = ucb1x00_remove,
.suspend = ucb1x00_suspend,
.resume = ucb1x00_resume,
- .id_table = ucb1x00_id,
};
static int __init ucb1x00_init(void)