Bluetooth: hci_bcm: Use bt_dev logging helpers
Replace BT_ logging calls by the new bt_dev ones.
Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 42ab91d..fbad52f 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -80,7 +80,7 @@
clock.type = BCM_UART_CLOCK_48MHZ;
- BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+ bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
/* This Broadcom specific command changes the UART's controller
* clock for baud rate > 3000000.
@@ -88,15 +88,15 @@
skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
- BT_ERR("%s: BCM: failed to write clock command (%d)",
- hdev->name, err);
+ bt_dev_err(hdev, "BCM: failed to write clock (%d)",
+ err);
return err;
}
kfree_skb(skb);
}
- BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+ bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
param.zero = cpu_to_le16(0);
param.baud_rate = cpu_to_le32(speed);
@@ -108,8 +108,8 @@
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
- BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
- hdev->name, err);
+ bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
+ err);
return err;
}
@@ -154,7 +154,7 @@
struct bcm_data *bcm;
struct list_head *p;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
if (!bcm)
@@ -194,7 +194,7 @@
{
struct bcm_data *bcm = hu->priv;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
/* Protect bcm->dev against removal of the device or driver */
mutex_lock(&bcm_device_lock);
@@ -218,7 +218,7 @@
{
struct bcm_data *bcm = hu->priv;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
skb_queue_purge(&bcm->txq);
@@ -232,7 +232,7 @@
unsigned int speed;
int err;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
@@ -242,13 +242,13 @@
err = request_firmware(&fw, fw_name, &hu->hdev->dev);
if (err < 0) {
- BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+ bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
return 0;
}
err = btbcm_patchram(hu->hdev, fw);
if (err) {
- BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+ bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
goto finalize;
}
@@ -302,7 +302,7 @@
bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
if (IS_ERR(bcm->rx_skb)) {
int err = PTR_ERR(bcm->rx_skb);
- BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
bcm->rx_skb = NULL;
return err;
}
@@ -314,7 +314,7 @@
{
struct bcm_data *bcm = hu->priv;
- BT_DBG("hu %p skb %p", hu, skb);
+ bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
@@ -336,7 +336,7 @@
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
- BT_DBG("suspend (%p): is_suspended %d", bdev, bdev->is_suspended);
+ bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
mutex_lock(&bcm_device_lock);
@@ -353,7 +353,7 @@
/* Suspend the device */
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, false);
- BT_DBG("suspend, delaying 15 ms");
+ bt_dev_dbg(bdev, "suspend, delaying 15 ms");
mdelay(15);
}
@@ -368,7 +368,7 @@
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
- BT_DBG("resume (%p): is_suspended %d", bdev, bdev->is_suspended);
+ bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
mutex_lock(&bcm_device_lock);
@@ -377,7 +377,7 @@
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, true);
- BT_DBG("resume, delaying 15 ms");
+ bt_dev_dbg(bdev, "resume, delaying 15 ms");
mdelay(15);
}