clk: tegra: PLLE spread spectrum control
Add spread spectrum control for PLLE in Tegra114.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 197074a..c9d1e5c 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -77,7 +77,23 @@
#define PLLE_MISC_SETUP_VALUE (7 << PLLE_MISC_SETUP_BASE_SHIFT)
#define PLLE_SS_CTRL 0x68
-#define PLLE_SS_DISABLE (7 << 10)
+#define PLLE_SS_CNTL_BYPASS_SS BIT(10)
+#define PLLE_SS_CNTL_INTERP_RESET BIT(11)
+#define PLLE_SS_CNTL_SSC_BYP BIT(12)
+#define PLLE_SS_CNTL_CENTER BIT(14)
+#define PLLE_SS_CNTL_INVERT BIT(15)
+#define PLLE_SS_DISABLE (PLLE_SS_CNTL_BYPASS_SS | PLLE_SS_CNTL_INTERP_RESET |\
+ PLLE_SS_CNTL_SSC_BYP)
+#define PLLE_SS_MAX_MASK 0x1ff
+#define PLLE_SS_MAX_VAL 0x25
+#define PLLE_SS_INC_MASK (0xff << 16)
+#define PLLE_SS_INC_VAL (0x1 << 16)
+#define PLLE_SS_INCINTRV_MASK (0x3f << 24)
+#define PLLE_SS_INCINTRV_VAL (0x20 << 24)
+#define PLLE_SS_COEFFICIENTS_MASK \
+ (PLLE_SS_MAX_MASK | PLLE_SS_INC_MASK | PLLE_SS_INCINTRV_MASK)
+#define PLLE_SS_COEFFICIENTS_VAL \
+ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL)
#define PLLE_AUX_PLLP_SEL BIT(2)
#define PLLE_AUX_ENABLE_SWCTL BIT(4)
@@ -1217,6 +1233,18 @@
if (ret < 0)
goto out;
+ val = pll_readl(PLLE_SS_CTRL, pll);
+ val &= ~(PLLE_SS_CNTL_CENTER | PLLE_SS_CNTL_INVERT);
+ val &= ~PLLE_SS_COEFFICIENTS_MASK;
+ val |= PLLE_SS_COEFFICIENTS_VAL;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ val &= ~(PLLE_SS_CNTL_SSC_BYP | PLLE_SS_CNTL_BYPASS_SS);
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ udelay(1);
+ val &= ~PLLE_SS_CNTL_INTERP_RESET;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ udelay(1);
+
/* TODO: enable hw control of xusb brick pll */
out: