net: Use VRF device index for lookups on TX
As with ingress use the index of VRF master device for route lookups on
egress. However, the oif should only be used to direct the lookups to a
specific table. Routes in the table are not based on the VRF device but
rather interfaces that are part of the VRF so do not consider the oif for
lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this
latter part.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/net/flow.h b/include/net/flow.h
index 3098ae3..f305588 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -33,6 +33,7 @@
__u8 flowic_flags;
#define FLOWI_FLAG_ANYSRC 0x01
#define FLOWI_FLAG_KNOWN_NH 0x02
+#define FLOWI_FLAG_VRFSRC 0x04
__u32 flowic_secid;
struct flowi_tunnel flowic_tun_key;
};
diff --git a/include/net/route.h b/include/net/route.h
index 2d45f41..94189d4 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -251,6 +251,9 @@
if (inet_sk(sk)->transparent)
flow_flags |= FLOWI_FLAG_ANYSRC;
+ if (netif_index_is_vrf(sock_net(sk), oif))
+ flow_flags |= FLOWI_FLAG_VRFSRC;
+
flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE,
protocol, flow_flags, dst, src, dport, sport);
}
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 37c4bb8..1243c79 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1423,8 +1423,11 @@
nh->nh_flags & RTNH_F_LINKDOWN &&
!(fib_flags & FIB_LOOKUP_IGNORE_LINKSTATE))
continue;
- if (flp->flowi4_oif && flp->flowi4_oif != nh->nh_oif)
- continue;
+ if (!(flp->flowi4_flags & FLOWI_FLAG_VRFSRC)) {
+ if (flp->flowi4_oif &&
+ flp->flowi4_oif != nh->nh_oif)
+ continue;
+ }
if (!(fib_flags & FIB_LOOKUP_NOREF))
atomic_inc(&fi->fib_clntref);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index c0556f1..1164fc4 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -96,6 +96,7 @@
#include <net/xfrm.h>
#include <net/inet_common.h>
#include <net/ip_fib.h>
+#include <net/vrf.h>
/*
* Build xmit assembly blocks
@@ -425,6 +426,7 @@
fl4.flowi4_mark = mark;
fl4.flowi4_tos = RT_TOS(ip_hdr(skb)->tos);
fl4.flowi4_proto = IPPROTO_ICMP;
+ fl4.flowi4_oif = vrf_master_ifindex_rcu(skb->dev) ? : skb->dev->ifindex;
security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
@@ -458,6 +460,8 @@
fl4->flowi4_proto = IPPROTO_ICMP;
fl4->fl4_icmp_type = type;
fl4->fl4_icmp_code = code;
+ fl4->flowi4_oif = vrf_master_ifindex_rcu(skb_in->dev) ? : skb_in->dev->ifindex;
+
security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
rt = __ip_route_output_key(net, fl4);
if (IS_ERR(rt))
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index c26ff1f..2c89d294 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2131,6 +2131,11 @@
fl4->saddr = inet_select_addr(dev_out, 0,
RT_SCOPE_HOST);
}
+ if (netif_is_vrf(dev_out) &&
+ !(fl4->flowi4_flags & FLOWI_FLAG_VRFSRC)) {
+ rth = vrf_dev_get_rth(dev_out);
+ goto out;
+ }
}
if (!fl4->daddr) {