MIPS: SEAD3: Combine all platform device registrations in one file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 37f95f2a..ecd71db 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -8,12 +8,11 @@
# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved.
# Steven J. Hill <sjhill@mips.com>
#
-obj-y := sead3-lcd.o sead3-display.o sead3-ehci.o \
- sead3-init.o sead3-int.o sead3-mtd.o \
- sead3-net.o sead3-platform.o sead3-reset.o \
+obj-y := sead3-lcd.o sead3-display.o sead3-init.o \
+ sead3-int.o sead3-platform.o sead3-reset.o \
sead3-setup.o sead3-time.o
-obj-y += leds-sead3.o sead3-leds.o
+obj-y += leds-sead3.o
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c
deleted file mode 100644
index e2b094a..0000000
--- a/arch/mips/mti-sead3/sead3-ehci.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-static struct resource ehci_resources[] = {
- {
- .start = 0x1b200000,
- .end = 0x1b200fff,
- .flags = IORESOURCE_MEM
- },
- {
- .flags = IORESOURCE_IRQ
- }
-};
-
-static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
- .name = "sead3-ehci",
- .id = 0,
- .dev = {
- .dma_mask = &sead3_usbdev_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32)
- },
- .num_resources = ARRAY_SIZE(ehci_resources),
- .resource = ehci_resources
-};
-
-static int __init ehci_init(void)
-{
- if (gic_present)
- ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
- else
- ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
- return platform_device_register(&ehci_device);
-}
-
-device_initcall(ehci_init);
diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c
deleted file mode 100644
index c6fa3e4..0000000
--- a/arch/mips/mti-sead3/sead3-leds.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#define LEDFLAGS(bits, shift) \
- ((bits << 8) | (shift << 8))
-
-#define LEDBITS(id, shift, bits) \
- .name = id #shift, \
- .flags = LEDFLAGS(bits, shift)
-
-struct led_info led_data_info[] = {
- { LEDBITS("bit", 0, 1) },
- { LEDBITS("bit", 1, 1) },
- { LEDBITS("bit", 2, 1) },
- { LEDBITS("bit", 3, 1) },
- { LEDBITS("bit", 4, 1) },
- { LEDBITS("bit", 5, 1) },
- { LEDBITS("bit", 6, 1) },
- { LEDBITS("bit", 7, 1) },
- { LEDBITS("all", 0, 8) },
-};
-
-static struct led_platform_data led_data = {
- .num_leds = ARRAY_SIZE(led_data_info),
- .leds = led_data_info
-};
-
-static struct resource pled_resources[] = {
- {
- .start = 0x1f000210,
- .end = 0x1f000217,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device pled_device = {
- .name = "sead3::pled",
- .id = 0,
- .dev = {
- .platform_data = &led_data,
- },
- .num_resources = ARRAY_SIZE(pled_resources),
- .resource = pled_resources
-};
-
-
-static struct resource fled_resources[] = {
- {
- .start = 0x1f000218,
- .end = 0x1f00021f,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device fled_device = {
- .name = "sead3::fled",
- .id = 0,
- .dev = {
- .platform_data = &led_data,
- },
- .num_resources = ARRAY_SIZE(fled_resources),
- .resource = fled_resources
-};
-
-static struct platform_device sead3_led_device = {
- .name = "sead3-led",
- .id = -1,
-};
-
-struct platform_device *sead3_led_devices[] = {
- &pled_device,
- &fled_device,
- &sead3_led_device,
-};
-
-static int __init sead3_led_init(void)
-{
- return platform_add_devices(sead3_led_devices, ARRAY_SIZE(sead3_led_devices));
-}
-
-device_initcall(sead3_led_init);
diff --git a/arch/mips/mti-sead3/sead3-mtd.c b/arch/mips/mti-sead3/sead3-mtd.c
deleted file mode 100644
index f9c890d..0000000
--- a/arch/mips/mti-sead3/sead3-mtd.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-static struct mtd_partition sead3_mtd_partitions[] = {
- {
- .name = "User FS",
- .offset = 0x00000000,
- .size = 0x01fc0000,
- }, {
- .name = "Board Config",
- .offset = 0x01fc0000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE
- },
-};
-
-static struct physmap_flash_data sead3_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
- .parts = sead3_mtd_partitions
-};
-
-static struct resource sead3_flash_resource = {
- .start = 0x1c000000,
- .end = 0x1dffffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device sead3_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &sead3_flash_data,
- },
- .num_resources = 1,
- .resource = &sead3_flash_resource,
-};
-
-static int __init sead3_mtd_init(void)
-{
- platform_device_register(&sead3_flash);
-
- return 0;
-}
-device_initcall(sead3_mtd_init);
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
deleted file mode 100644
index 16895f8..0000000
--- a/arch/mips/mti-sead3/sead3-net.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-static struct smsc911x_platform_config sead3_smsc911x_data = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-struct resource sead3_net_resources[] = {
- {
- .start = 0x1f010000,
- .end = 0x1f01ffff,
- .flags = IORESOURCE_MEM
- },
- {
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device sead3_net_device = {
- .name = "smsc911x",
- .id = 0,
- .dev = {
- .platform_data = &sead3_smsc911x_data,
- },
- .num_resources = ARRAY_SIZE(sead3_net_resources),
- .resource = sead3_net_resources
-};
-
-static int __init sead3_net_init(void)
-{
- if (gic_present)
- sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
- else
- sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
- return platform_device_register(&sead3_net_device);
-}
-
-device_initcall(sead3_net_init);
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index a383254..73b73ef 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -5,9 +5,15 @@
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
+#include <linux/dma-mapping.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/irqchip/mips-gic.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
#include <asm/mips-boards/sead3int.h>
@@ -35,16 +41,183 @@
},
};
-static int __init uart8250_init(void)
+static struct smsc911x_platform_config sead3_smsc911x_data = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sead3_net_resources[] = {
+ {
+ .start = 0x1f010000,
+ .end = 0x1f01ffff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device sead3_net_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &sead3_smsc911x_data,
+ },
+ .num_resources = ARRAY_SIZE(sead3_net_resources),
+ .resource = sead3_net_resources
+};
+
+static struct mtd_partition sead3_mtd_partitions[] = {
+ {
+ .name = "User FS",
+ .offset = 0x00000000,
+ .size = 0x01fc0000,
+ }, {
+ .name = "Board Config",
+ .offset = 0x01fc0000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data sead3_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
+ .parts = sead3_mtd_partitions
+};
+
+static struct resource sead3_flash_resource = {
+ .start = 0x1c000000,
+ .end = 0x1dffffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device sead3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sead3_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &sead3_flash_resource,
+};
+
+#define LEDFLAGS(bits, shift) \
+ ((bits << 8) | (shift << 8))
+
+#define LEDBITS(id, shift, bits) \
+ .name = id #shift, \
+ .flags = LEDFLAGS(bits, shift)
+
+static struct led_info led_data_info[] = {
+ { LEDBITS("bit", 0, 1) },
+ { LEDBITS("bit", 1, 1) },
+ { LEDBITS("bit", 2, 1) },
+ { LEDBITS("bit", 3, 1) },
+ { LEDBITS("bit", 4, 1) },
+ { LEDBITS("bit", 5, 1) },
+ { LEDBITS("bit", 6, 1) },
+ { LEDBITS("bit", 7, 1) },
+ { LEDBITS("all", 0, 8) },
+};
+
+static struct led_platform_data led_data = {
+ .num_leds = ARRAY_SIZE(led_data_info),
+ .leds = led_data_info
+};
+
+static struct resource pled_resources[] = {
+ {
+ .start = 0x1f000210,
+ .end = 0x1f000217,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device pled_device = {
+ .name = "sead3::pled",
+ .id = 0,
+ .dev = {
+ .platform_data = &led_data,
+ },
+ .num_resources = ARRAY_SIZE(pled_resources),
+ .resource = pled_resources
+};
+
+
+static struct resource fled_resources[] = {
+ {
+ .start = 0x1f000218,
+ .end = 0x1f00021f,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device fled_device = {
+ .name = "sead3::fled",
+ .id = 0,
+ .dev = {
+ .platform_data = &led_data,
+ },
+ .num_resources = ARRAY_SIZE(fled_resources),
+ .resource = fled_resources
+};
+
+static struct platform_device sead3_led_device = {
+ .name = "sead3-led",
+ .id = -1,
+};
+
+static struct resource ehci_resources[] = {
+ {
+ .start = 0x1b200000,
+ .end = 0x1b200fff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ehci_device = {
+ .name = "sead3-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &sead3_usbdev_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32)
+ },
+ .num_resources = ARRAY_SIZE(ehci_resources),
+ .resource = ehci_resources
+};
+
+static struct platform_device *sead3_platform_devices[] __initdata = {
+ &uart8250_device,
+ &sead3_flash,
+ &pled_device,
+ &fled_device,
+ &sead3_led_device,
+ &ehci_device,
+ &sead3_net_device,
+};
+
+static int __init sead3_platforms_device_init(void)
{
if (gic_present) {
uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
+ ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
+ sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
} else {
uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
+ ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
+ sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
}
- return platform_device_register(&uart8250_device);
+
+ return platform_add_devices(sead3_platform_devices,
+ ARRAY_SIZE(sead3_platform_devices));
}
-device_initcall(uart8250_init);
+device_initcall(sead3_platforms_device_init);