rtlwifi: Change PCI drivers to use the new PM framework
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9983fa1..5380f3b 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1993,36 +1993,25 @@
suspend function first, So there is
no need to call hw_disable here.
****************************************/
-int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+int rtl_pci_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct rtl_priv *rtlpriv = rtl_priv(hw);
rtlpriv->cfg->ops->hw_suspend(hw);
rtl_deinit_rfkill(hw);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
EXPORT_SYMBOL(rtl_pci_suspend);
-int rtl_pci_resume(struct pci_dev *pdev)
+int rtl_pci_resume(struct device *dev)
{
- int ret;
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct rtl_priv *rtlpriv = rtl_priv(hw);
- pci_set_power_state(pdev, PCI_D0);
- ret = pci_enable_device(pdev);
- if (ret) {
- RT_ASSERT(false, ("ERR: <======\n"));
- return ret;
- }
-
- pci_restore_state(pdev);
-
rtlpriv->cfg->ops->hw_resume(hw);
rtl_init_rfkill(hw);
return 0;
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index a24e505..ebe0b42c 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -237,8 +237,8 @@
int __devinit rtl_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
void rtl_pci_disconnect(struct pci_dev *pdev);
-int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
-int rtl_pci_resume(struct pci_dev *pdev);
+int rtl_pci_suspend(struct device *dev);
+int rtl_pci_resume(struct device *dev);
static inline u8 pci_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
{
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index 869f072..141302f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -370,17 +370,21 @@
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92ce_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92ce_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
static int __init rtl92ce_module_init(void)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
index 4fe8b15..691f800 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
@@ -390,17 +390,21 @@
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92de_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92de_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
/* add global spin lock to solve the problem that
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index cdaded0..d2dad53 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -401,17 +401,21 @@
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92se_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92se_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
static int __init rtl92se_module_init(void)