ath10k: Add wmi command support for station specific TID config
This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-2-git-send-email-tamizhr@codeaurora.org
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 511144b..cba9b23 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -203,6 +203,7 @@ enum wmi_service {
WMI_SERVICE_SYNC_DELETE_CMDS,
WMI_SERVICE_TX_PWR_PER_PEER,
WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -503,6 +504,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
+ SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -834,6 +836,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_TX_PWR_PER_PEER, len);
SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
WMI_SERVICE_RESET_CHIP, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -1036,6 +1040,7 @@ struct wmi_cmd_map {
u32 tdls_set_offchan_mode_cmdid;
u32 radar_found_cmdid;
u32 set_bb_timing_cmdid;
+ u32 per_peer_per_tid_config_cmdid;
};
/*
@@ -1877,6 +1882,8 @@ enum wmi_10_4_cmd_id {
WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
WMI_10_4_RADAR_FOUND_CMDID,
+ WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+ WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
};
@@ -7220,6 +7227,53 @@ struct wmi_tdls_peer_event {
__le32 vdev_id;
} __packed;
+enum wmi_tid_aggr_control_conf {
+ WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+ WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+ WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+ WMI_PEER_TID_CONFIG_ACK,
+ WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+ WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+ WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+ u32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ u32 tid;
+ enum wmi_noack_tid_conf ack_policy;
+ enum wmi_tid_aggr_control_conf aggr_control;
+ u8 rate_ctrl;
+ u32 retry_count;
+ u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 tid;
+
+ /* see enum wmi_noack_tid_conf */
+ __le32 ack_policy;
+
+ /* see enum wmi_tid_aggr_control_conf */
+ __le32 aggr_control;
+
+ /* see enum wmi_tid_rate_ctrl_conf */
+ __le32 rate_control;
+ __le32 rcode_flags;
+ __le32 retry_count;
+} __packed;
+
enum wmi_txbf_conf {
WMI_TXBF_CONF_UNSUPPORTED,
WMI_TXBF_CONF_BEFORE_ASSOC,