tty: serial: samsung: Remove USI initialization
USI control is now extracted to the dedicated USI driver. Remove USI
related code from serial driver to avoid conflicts and code duplication.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-4-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index ca084c1..f986a92 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -65,7 +65,6 @@ enum s3c24xx_port_type {
struct s3c24xx_uart_info {
char *name;
enum s3c24xx_port_type type;
- bool has_usi;
unsigned int port_type;
unsigned int fifosize;
unsigned long rx_fifomask;
@@ -1357,28 +1356,6 @@ static int apple_s5l_serial_startup(struct uart_port *port)
return ret;
}
-static void exynos_usi_init(struct uart_port *port)
-{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct s3c24xx_uart_info *info = ourport->info;
- unsigned int val;
-
- if (!info->has_usi)
- return;
-
- /* Clear the software reset of USI block (it's set at startup) */
- val = rd_regl(port, USI_CON);
- val &= ~USI_CON_RESET_MASK;
- wr_regl(port, USI_CON, val);
- udelay(1);
-
- /* Continuously provide the clock to USI IP w/o gating (for Rx mode) */
- val = rd_regl(port, USI_OPTION);
- val &= ~USI_OPTION_HWACG_MASK;
- val |= USI_OPTION_HWACG_CLKREQ_ON;
- wr_regl(port, USI_OPTION, val);
-}
-
/* power power management control */
static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
@@ -1405,8 +1382,6 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
if (!IS_ERR(ourport->baudclk))
clk_prepare_enable(ourport->baudclk);
-
- exynos_usi_init(port);
break;
default:
dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
@@ -2130,8 +2105,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
if (ret)
pr_warn("uart: failed to enable baudclk\n");
- exynos_usi_init(port);
-
/* Keep all interrupts masked and cleared */
switch (ourport->info->type) {
case TYPE_S3C6400:
@@ -2780,11 +2753,10 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
#endif
#if defined(CONFIG_ARCH_EXYNOS)
-#define EXYNOS_COMMON_SERIAL_DRV_DATA(_has_usi) \
+#define EXYNOS_COMMON_SERIAL_DRV_DATA() \
.info = &(struct s3c24xx_uart_info) { \
.name = "Samsung Exynos UART", \
.type = TYPE_S3C6400, \
- .has_usi = _has_usi, \
.port_type = PORT_S3C6400, \
.has_divslot = 1, \
.rx_fifomask = S5PV210_UFSTAT_RXMASK, \
@@ -2805,17 +2777,17 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
} \
static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(false),
+ EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 256, 64, 16, 16 },
};
static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(false),
+ EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 64, 256, 16, 256 },
};
static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(true),
+ EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 256, 64, 64, 64 },
};