r6040: Move the RDC driver
Move the RDC driver into drivers/net/ethernet/rdc/ and make the
necessary Kconfig and Makefile changes.
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index ae60f8c..ca3ec84c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5343,7 +5343,7 @@
M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/r6040.c
+F: drivers/net/ethernet/rdc/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
M: Andy Grover <andy.grover@oracle.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3f6622c..ca3afb5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -379,19 +379,6 @@
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
-config R6040
- tristate "RDC R6040 Fast Ethernet Adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- select PHYLIB
- help
- This is a driver for the R6040 Fast Ethernet MACs found in the
- the RDC R-321x System-on-chips.
-
- To compile this driver as a module, choose M here: the module
- will be called r6040. This is recommended.
-
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d7873ba..051439f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -16,7 +16,6 @@
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 68a31b9..78e567f 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -83,6 +83,7 @@
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
+source "drivers/net/ethernet/rdc/Kconfig"
config S6GMAC
tristate "S6105 GMAC ethernet support"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0e91c4d..48d3209 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -43,6 +43,7 @@
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
obj-$(CONFIG_NET_VENDOR_SIS) += sis/
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
new file mode 100644
index 0000000..b15ebac
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -0,0 +1,33 @@
+#
+# RDC network device configuration
+#
+
+config NET_VENDOR_RDC
+ bool "RDC devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about RDC cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_RDC
+
+config R6040
+ tristate "RDC R6040 Fast Ethernet Adapter support"
+ depends on PCI
+ select CRC32
+ select MII
+ select PHYLIB
+ ---help---
+ This is a driver for the R6040 Fast Ethernet MACs found in the
+ the RDC R-321x System-on-chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called r6040. This is recommended.
+
+endif # NET_VENDOR_RDC
diff --git a/drivers/net/ethernet/rdc/Makefile b/drivers/net/ethernet/rdc/Makefile
new file mode 100644
index 0000000..8d51fd2
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC network device drivers.
+#
+
+obj-$(CONFIG_R6040) += r6040.o
diff --git a/drivers/net/r6040.c b/drivers/net/ethernet/rdc/r6040.c
similarity index 100%
rename from drivers/net/r6040.c
rename to drivers/net/ethernet/rdc/r6040.c