V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER
This board has some special tea5767 configuration. Basically, radio
XTAL uses a different frequency than the other supported radios. It
uses a 13 MHz XTAL.
This patch adds the proper radio gpio and tea5767 configurations for
the board.
Also, with PAL/BG, the board requires some special init for tda9887:
port1=0 port2=0 qss=1
Thanks to Serge Kolotylo and MIDImaster for their help on identifying
the proper needs for this driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index a4eb6a8..f8a786a 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -26,6 +26,7 @@
#include <linux/delay.h>
#include "cx88.h"
+#include "tea5767.h"
static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
@@ -245,6 +246,10 @@
}},
.radio = {
.type = CX88_RADIO,
+ .vmux = 3,
+ .gpio0 = 0x000040bf,
+ .gpio1 = 0x000080c0,
+ .gpio2 = 0x0000ff20,
},
},
[CX88_BOARD_WINFAST_DV2000] = {
@@ -1979,6 +1984,23 @@
core->name, i);
}
break;
+ case CX88_BOARD_MSI_TVANYWHERE_MASTER:
+ {
+ struct v4l2_priv_tun_config tea5767_cfg;
+ struct tea5767_ctrl ctl;
+
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.high_cut = 1;
+ ctl.st_noise = 1;
+ ctl.deemph_75 = 1;
+ ctl.xtal_freq = TEA5767_HIGH_LO_13MHz;
+
+ tea5767_cfg.tuner = TUNER_TEA5767;
+ tea5767_cfg.priv = &ctl;
+
+ cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+ }
}
}