usb: cdns3: Fix on-chip memory overflow issue
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts
register. The issue occurred because EP_CFG register was set twice
before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING
causes that controller increases internal counter holding the number
of reserved on-chip buffers. First time this register was updated in
function cdns3_ep_config before delegating SET_CONFIGURATION request
to class driver and again it was updated when class wanted to enable
endpoint. This patch fixes this issue by configuring endpoints
enabled by class driver in cdns3_gadget_ep_enable and others just
before status stage.
Cc: stable@vger.kernel.org#v5.8+
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-and-tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 692acf7..36c8c1a 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -296,6 +296,8 @@ static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
*/
void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
{
+ int i;
+
writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
cdns3_allow_enable_l1(priv_dev, 0);
@@ -304,6 +306,10 @@ void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
priv_dev->out_mem_is_allocated = 0;
priv_dev->wait_for_setup = 0;
priv_dev->using_streams = 0;
+
+ for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+ if (priv_dev->eps[i])
+ priv_dev->eps[i]->flags &= ~EP_CONFIGURED;
}
/**
@@ -1977,27 +1983,6 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
return 0;
}
-static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
- struct cdns3_endpoint *priv_ep)
-{
- if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER)
- return;
-
- if (priv_dev->dev_ver >= DEV_VER_V3) {
- u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0));
-
- /*
- * Stream capable endpoints are handled by using ep_tdl
- * register. Other endpoints use TDL from TRB feature.
- */
- cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb, mask);
- }
-
- /* Enable Stream Bit TDL chk and SID chk */
- cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_STREAM_EN |
- EP_CFG_TDL_CHK | EP_CFG_SID_CHK);
-}
-
static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
struct cdns3_endpoint *priv_ep)
{
@@ -2035,8 +2020,9 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
/**
* cdns3_ep_config Configure hardware endpoint
* @priv_ep: extended endpoint object
+ * @enable: set EP_CFG_ENABLE bit in ep_cfg register.
*/
-void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
+int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
{
bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
@@ -2097,7 +2083,7 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
break;
default:
/* all other speed are not supported */
- return;
+ return -EINVAL;
}
if (max_packet_size == 1024)
@@ -2107,11 +2093,33 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
else
priv_ep->trb_burst_size = 16;
- ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
- !!priv_ep->dir);
- if (ret) {
- dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
- return;
+ /* onchip buffer is only allocated before configuration */
+ if (!priv_dev->hw_configured_flag) {
+ ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
+ !!priv_ep->dir);
+ if (ret) {
+ dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
+ return ret;
+ }
+ }
+
+ if (enable)
+ ep_cfg |= EP_CFG_ENABLE;
+
+ if (priv_ep->use_streams && priv_dev->gadget.speed >= USB_SPEED_SUPER) {
+ if (priv_dev->dev_ver >= DEV_VER_V3) {
+ u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0));
+
+ /*
+ * Stream capable endpoints are handled by using ep_tdl
+ * register. Other endpoints use TDL from TRB feature.
+ */
+ cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb,
+ mask);
+ }
+
+ /* Enable Stream Bit TDL chk and SID chk */
+ ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK;
}
ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
@@ -2121,9 +2129,12 @@ void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
cdns3_select_ep(priv_dev, bEndpointAddress);
writel(ep_cfg, &priv_dev->regs->ep_cfg);
+ priv_ep->flags |= EP_CONFIGURED;
dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
priv_ep->name, ep_cfg);
+
+ return 0;
}
/* Find correct direction for HW endpoint according to description */
@@ -2264,7 +2275,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
u32 bEndpointAddress;
unsigned long flags;
int enable = 1;
- int ret;
+ int ret = 0;
int val;
priv_ep = ep_to_cdns3_ep(ep);
@@ -2303,6 +2314,17 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
bEndpointAddress = priv_ep->num | priv_ep->dir;
cdns3_select_ep(priv_dev, bEndpointAddress);
+ /*
+ * For some versions of controller at some point during ISO OUT traffic
+ * DMA reads Transfer Ring for the EP which has never got doorbell.
+ * This issue was detected only on simulation, but to avoid this issue
+ * driver add protection against it. To fix it driver enable ISO OUT
+ * endpoint before setting DRBL. This special treatment of ISO OUT
+ * endpoints are recommended by controller specification.
+ */
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
+ enable = 0;
+
if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
/*
* Enable stream support (SS mode) related interrupts
@@ -2313,13 +2335,17 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN |
EP_STS_EN_STREAMREN;
priv_ep->use_streams = true;
- cdns3_stream_ep_reconfig(priv_dev, priv_ep);
+ ret = cdns3_ep_config(priv_ep, enable);
priv_dev->using_streams |= true;
}
+ } else {
+ ret = cdns3_ep_config(priv_ep, enable);
}
- ret = cdns3_allocate_trb_pool(priv_ep);
+ if (ret)
+ goto exit;
+ ret = cdns3_allocate_trb_pool(priv_ep);
if (ret)
goto exit;
@@ -2349,20 +2375,6 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
writel(reg, &priv_dev->regs->ep_sts_en);
- /*
- * For some versions of controller at some point during ISO OUT traffic
- * DMA reads Transfer Ring for the EP which has never got doorbell.
- * This issue was detected only on simulation, but to avoid this issue
- * driver add protection against it. To fix it driver enable ISO OUT
- * endpoint before setting DRBL. This special treatment of ISO OUT
- * endpoints are recommended by controller specification.
- */
- if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
- enable = 0;
-
- if (enable)
- cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE);
-
ep->desc = desc;
priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING |
EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN);