SFH: PCIe driver to add support of AMD sensor fusion hub
AMD SFH (Sensor Fusion Hub) is a solution running on MP2
(which is ARM core connected to x86 for processing sensor data).
AMD SFH uses HID over PCI bus to form the HID descriptors and
talks to HID clients like the monitor-sensor/iio-proxy. MP2 which
is exposed as a PCI device to the x86, uses mailboxes to talk to
MP2 firmware to send/receive commands.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
new file mode 100644
index 0000000..e8be94f
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * AMD MP2 PCIe communication driver
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#ifndef PCIE_MP2_AMD_H
+#define PCIE_MP2_AMD_H
+
+#include <linux/pci.h>
+
+#define PCI_DEVICE_ID_AMD_MP2 0x15E4
+
+#define ENABLE_SENSOR 1
+#define DISABLE_SENSOR 2
+#define STOP_ALL_SENSORS 8
+
+/* MP2 C2P Message Registers */
+#define AMD_C2P_MSG0 0x10500
+#define AMD_C2P_MSG1 0x10504
+#define AMD_C2P_MSG2 0x10508
+
+/* MP2 P2C Message Registers */
+#define AMD_P2C_MSG3 0x1068C /* Supported Sensors info */
+
+/* SFH Command register */
+union sfh_cmd_base {
+ u32 ul;
+ struct {
+ u32 cmd_id : 8;
+ u32 sensor_id : 8;
+ u32 period : 16;
+ } s;
+};
+
+union sfh_cmd_param {
+ u32 ul;
+ struct {
+ u32 buf_layout : 2;
+ u32 buf_length : 6;
+ u32 rsvd : 24;
+ } s;
+};
+
+struct sfh_cmd_reg {
+ union sfh_cmd_base cmd_base;
+ union sfh_cmd_param cmd_param;
+ phys_addr_t phys_addr;
+};
+
+enum sensor_idx {
+ accel_idx = 0,
+ gyro_idx = 1,
+ mag_idx = 2,
+ als_idx = 19
+};
+
+struct amd_mp2_dev {
+ struct pci_dev *pdev;
+ struct amdtp_cl_data *cl_data;
+ void __iomem *mmio;
+ u32 activecontrolstatus;
+};
+
+struct amd_mp2_sensor_info {
+ u8 sensor_idx;
+ u32 period;
+ phys_addr_t phys_address;
+};
+
+void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info);
+void amd_stop_sensor(struct amd_mp2_dev *privdata, u16 sensor_idx);
+void amd_stop_all_sensors(struct amd_mp2_dev *privdata);
+int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id);
+int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata);
+int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata);
+#endif