USB: cp210x: fix whitespace issues
Fix missing and superfluous whitespace.
Fix misplaced brackets.
Fix indentation.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eb033fc9..1264173 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -35,8 +35,7 @@
*/
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
-static void cp210x_get_termios(struct tty_struct *,
- struct usb_serial_port *port);
+static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
@@ -169,7 +168,7 @@
static struct usb_serial_driver cp210x_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "cp210x",
+ .name = "cp210x",
},
.id_table = id_table,
.num_ports = 1,
@@ -179,7 +178,7 @@
.close = cp210x_close,
.break_ctl = cp210x_break_ctl,
.set_termios = cp210x_set_termios,
- .tiocmget = cp210x_tiocmget,
+ .tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.release = cp210x_release,
@@ -281,7 +280,7 @@
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
if (!buf) {
@@ -328,12 +327,11 @@
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n",
- __func__);
+ dev_err(&port->dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
@@ -384,7 +382,8 @@
* cp210x_quantise_baudrate
* Quantises the baud rate as per AN205 Table 1
*/
-static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud)
+{
if (baud <= 300)
baud = 300;
else if (baud <= 600) baud = 600;
@@ -467,9 +466,7 @@
cp210x_get_termios_port(tty->driver_data,
&tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
- }
-
- else {
+ } else {
unsigned int cflag;
cflag = 0;
cp210x_get_termios_port(port, &cflag, &baud);
@@ -693,8 +690,8 @@
break;*/
default:
dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
- bits |= BITS_DATA_8;
- break;
+ bits |= BITS_DATA_8;
+ break;
}
if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
@@ -767,7 +764,7 @@
}
-static int cp210x_tiocmset (struct tty_struct *tty,
+static int cp210x_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -809,7 +806,7 @@
cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
}
-static int cp210x_tiocmget (struct tty_struct *tty)
+static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
@@ -829,7 +826,7 @@
return result;
}
-static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int state;