amd-xgbe: Add a hardware quirk for register definitions
A newer version of the hardware is using the same PCI ids for the network
device but has altered register definitions for determining the window
settings for the indirect PCS access. Add support to check for this
hardware and if found use the new register values.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index e76b7f6..c2730f1 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -265,6 +265,7 @@ static int xgbe_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct xgbe_prv_data *pdata;
struct device *dev = &pdev->dev;
void __iomem * const *iomap_table;
+ struct pci_dev *rdev;
unsigned int ma_lo, ma_hi;
unsigned int reg;
int bar_mask;
@@ -326,8 +327,20 @@ static int xgbe_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (netif_msg_probe(pdata))
dev_dbg(dev, "xpcs_regs = %p\n", pdata->xpcs_regs);
+ /* Set the PCS indirect addressing definition registers */
+ rdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
+ if (rdev &&
+ (rdev->vendor == PCI_VENDOR_ID_AMD) && (rdev->device == 0x15d0)) {
+ pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF;
+ pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT;
+ } else {
+ pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
+ pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;
+ }
+ pci_dev_put(rdev);
+
/* Configure the PCS indirect addressing support */
- reg = XPCS32_IOREAD(pdata, PCS_V2_WINDOW_DEF);
+ reg = XPCS32_IOREAD(pdata, pdata->xpcs_window_def_reg);
pdata->xpcs_window = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, OFFSET);
pdata->xpcs_window <<= 6;
pdata->xpcs_window_size = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, SIZE);