net: dsa: bcm_sf2: Use device managed helpers
Now that we have converted the drivers into a proper platform device
driver, we can use the device managed helper functions to simplify the
error paths a bit wrt. register resources and IRQs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index fe1cc92..9f8e007 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1630,6 +1630,7 @@
struct bcm_sf2_priv *priv;
struct dsa_switch *ds;
void __iomem **base;
+ struct resource *r;
unsigned int i;
u32 reg, rev;
int ret;
@@ -1655,11 +1656,11 @@
base = &priv->core;
for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- *base = of_iomap(dn, i);
- if (*base == NULL) {
+ r = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ *base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(*base)) {
pr_err("unable to find register: %s\n", reg_names[i]);
- ret = -ENOMEM;
- goto out_unmap;
+ return PTR_ERR(*base);
}
base++;
}
@@ -1667,30 +1668,30 @@
ret = bcm_sf2_sw_rst(priv);
if (ret) {
pr_err("unable to software reset switch: %d\n", ret);
- goto out_unmap;
+ return ret;
}
ret = bcm_sf2_mdio_register(ds);
if (ret) {
pr_err("failed to register MDIO bus\n");
- goto out_unmap;
+ return ret;
}
/* Disable all interrupts and request them */
bcm_sf2_intr_disable(priv);
- ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
- "switch_0", priv);
+ ret = devm_request_irq(&pdev->dev, priv->irq0, bcm_sf2_switch_0_isr, 0,
+ "switch_0", priv);
if (ret < 0) {
pr_err("failed to request switch_0 IRQ\n");
goto out_mdio;
}
- ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
- "switch_1", priv);
+ ret = devm_request_irq(&pdev->dev, priv->irq1, bcm_sf2_switch_1_isr, 0,
+ "switch_1", priv);
if (ret < 0) {
pr_err("failed to request switch_1 IRQ\n");
- goto out_free_irq0;
+ goto out_mdio;
}
/* Reset the MIB counters */
@@ -1720,7 +1721,7 @@
ret = dsa_register_switch(ds, dn);
if (ret)
- goto out_free_irq1;
+ goto out_mdio;
pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
@@ -1729,19 +1730,8 @@
return 0;
-out_free_irq1:
- free_irq(priv->irq1, priv);
-out_free_irq0:
- free_irq(priv->irq0, priv);
out_mdio:
bcm_sf2_mdio_unregister(priv);
-out_unmap:
- base = &priv->core;
- for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- if (*base)
- iounmap(*base);
- base++;
- }
return ret;
}