ide: add short cables support
This patch allows users to override both host and device side cable detection
with "ideX=ata66" kernel parameter. Thanks to this it should be now possible
to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable
instead of 80-pin one.
Next patches add automatic detection of some systems using short cables.
Changes:
* Rename hwif->udma_four to hwif->cbl and make it u8.
* Convert all existing users accordingly (use ATA_CBL_* defines while at it).
* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().
* Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 09a7aed..1371b5b 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -329,9 +329,9 @@
return dev->irq;
}
-static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
{
- return 1;
+ return ATA_CBL_PATA80;
}
/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
@@ -341,7 +341,7 @@
* Bit 14 clear = primary IDE channel does not have 80-pin cable.
* Bit 14 set = primary IDE channel has 80-pin cable.
*/
-static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
@@ -349,8 +349,8 @@
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? 1 : 0;
- return 0;
+ dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
}
/* Sun Cobalt Alpine hardware avoids the 80-pin cable
@@ -359,18 +359,18 @@
*
* WARNING: this only works on Alpine hardware!
*/
-static unsigned int __devinit ata66_svwks_cobalt (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? 1 : 0;
- return 0;
+ dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
}
-static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
@@ -389,9 +389,9 @@
/* Per Specified Design by OEM, and ASIC Architect */
if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
- return 1;
+ return ATA_CBL_PATA80;
- return 0;
+ return ATA_CBL_PATA40;
}
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
@@ -422,8 +422,8 @@
hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- if (!hwif->udma_four)
- hwif->udma_four = ata66_svwks(hwif);
+ if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+ hwif->cbl = ata66_svwks(hwif);
}
if (!noautodma)
hwif->autodma = 1;