btrfs: make fast fsyncs wait only for writeback
Currently regardless of a full or a fast fsync we always wait for ordered
extents to complete, and then start logging the inode after that. However
for fast fsyncs we can just wait for the writeback to complete, we don't
need to wait for the ordered extents to complete since we use the list of
modified extents maps to figure out which extents we must log and we can
get their checksums directly from the ordered extents that are still in
flight, otherwise look them up from the checksums tree.
Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at
fsync time"), for fast fsyncs, we used to start logging without even
waiting for the writeback to complete first, we would wait for it to
complete after logging, while holding a transaction open, which lead to
performance issues when using cgroups and probably for other cases too,
as wait for IO while holding a transaction handle should be avoided as
much as possible. After that, for fast fsyncs, we started to wait for
ordered extents to complete before starting to log, which adds some
latency to fsyncs and we even got at least one report about a performance
drop which bisected to that particular change:
https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/
This change makes fast fsyncs only wait for writeback to finish before
starting to log the inode, instead of waiting for both the writeback to
finish and for the ordered extents to complete. This brings back part of
the logic we had that extracts checksums from in flight ordered extents,
which are not yet in the checksums tree, and making sure transaction
commits wait for the completion of ordered extents previously logged
(by far most of the time they have already completed by the time a
transaction commit starts, resulting in no wait at all), to avoid any
data loss if an ordered extent completes after the transaction used to
log an inode is committed, followed by a power failure.
When there are no other tasks accessing the checksums and the subvolume
btrees, the ordered extent completion is pretty fast, typically taking
100 to 200 microseconds only in my observations. However when there are
other tasks accessing these btrees, ordered extent completion can take a
lot more time due to lock contention on nodes and leaves of these btrees.
I've seen cases over 2 milliseconds, which starts to be significant. In
particular when we do have concurrent fsyncs against different files there
is a lot of contention on the checksums btree, since we have many tasks
writing the checksums into the btree and other tasks that already started
the logging phase are doing lookups for checksums in the btree.
This change also turns all ranged fsyncs into full ranged fsyncs, which
is something we already did when not using the NO_HOLES features or when
doing a full fsync. This is to guarantee we never miss checksums due to
writeback having been triggered only for a part of an extent, and we end
up logging the full extent but only checksums for the written range, which
results in missing checksums after log replay. Allowing ranged fsyncs to
operate again only in the original range, when using the NO_HOLES feature
and doing a fast fsync is doable but requires some non trivial changes to
the writeback path, which can always be worked on later if needed, but I
don't think they are a very common use case.
Several tests were performed using fio for different numbers of concurrent
jobs, each writing and fsyncing its own file, for both sequential and
random file writes. The tests were run on bare metal, no virtualization,
on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device,
with a kernel configuration that is the default of typical distributions
(debian in this case), without debug options enabled (kasan, kmemleak,
slub debug, debug of page allocations, lock debugging, etc).
The following script that calls fio was used:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/btrfs
MOUNT_OPTIONS="-o ssd -o space_cache=v2"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 5 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
BLOCK_SIZE=$4
WRITE_MODE=$5
if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then
echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'"
exit 1
fi
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=$WRITE_MODE
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=$BLOCK_SIZE
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
EOF
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The results were the following:
*************************
*** sequential writes ***
*************************
==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec
After patch:
WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec
(+9.8%, -8.8% runtime)
==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec
After patch:
WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec
(+21.5% throughput, -17.8% runtime)
==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec
After patch:
WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec
(+28.7% throughput, -22.3% runtime)
==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec
After patch:
WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec
(+35.6% throughput, -25.2% runtime)
==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec
After patch:
WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec
(+34.1% throughput, -25.6% runtime)
==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec
After patch:
WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec
(+19.1% throughput, -16.4% runtime)
==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ====
Before patch:
WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec
After patch:
WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec
(+23.1% throughput, -18.7% runtime)
************************
*** random writes ***
************************
==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec
After patch:
WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec
(+0.9% throughput, -1.7% runtime)
==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec
After patch:
WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec
(+2.3% throughput, -2.0% runtime)
==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec
After patch:
WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec
(+15.6% throughput, -13.3% runtime)
==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec
After patch:
WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec
(+11.6% throughput, -10.7% runtime)
==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec
After patch:
WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec
(+3.8% throughput, -3.8% runtime)
==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec
After patch:
WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec
(+12.7% throughput, -11.2% runtime)
==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ====
Before patch:
WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec
After patch:
WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec
(+6.3% throughput, -6.0% runtime)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index de14ed4..b859d5a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2114,20 +2114,24 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
struct btrfs_trans_handle *trans;
struct btrfs_log_ctx ctx;
int ret = 0, err;
+ u64 len;
+ bool full_sync;
trace_btrfs_sync_file(file, datasync);
btrfs_init_log_ctx(&ctx, inode);
/*
- * Set the range to full if the NO_HOLES feature is not enabled.
- * This is to avoid missing file extent items representing holes after
- * replaying the log.
+ * Always set the range to a full range, otherwise we can get into
+ * several problems, from missing file extent items to represent holes
+ * when not using the NO_HOLES feature, to log tree corruption due to
+ * races between hole detection during logging and completion of ordered
+ * extents outside the range, to missing checksums due to ordered extents
+ * for which we flushed only a subset of their pages.
*/
- if (!btrfs_fs_incompat(fs_info, NO_HOLES)) {
- start = 0;
- end = LLONG_MAX;
- }
+ start = 0;
+ end = LLONG_MAX;
+ len = (u64)LLONG_MAX + 1;
/*
* We write the dirty pages in the range and wait until they complete
@@ -2151,19 +2155,12 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
atomic_inc(&root->log_batch);
/*
- * If the inode needs a full sync, make sure we use a full range to
- * avoid log tree corruption, due to hole detection racing with ordered
- * extent completion for adjacent ranges and races between logging and
- * completion of ordered extents for adjancent ranges - both races
- * could lead to file extent items in the log with overlapping ranges.
- * Do this while holding the inode lock, to avoid races with other
- * tasks.
+ * Always check for the full sync flag while holding the inode's lock,
+ * to avoid races with other tasks. The flag must be either set all the
+ * time during logging or always off all the time while logging.
*/
- if (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
- &BTRFS_I(inode)->runtime_flags)) {
- start = 0;
- end = LLONG_MAX;
- }
+ full_sync = test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
+ &BTRFS_I(inode)->runtime_flags);
/*
* Before we acquired the inode's lock, someone may have dirtied more
@@ -2194,20 +2191,42 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
* We have to do this here to avoid the priority inversion of waiting on
* IO of a lower priority task while holding a transaction open.
*
- * Also, the range length can be represented by u64, we have to do the
- * typecasts to avoid signed overflow if it's [0, LLONG_MAX].
+ * For a full fsync we wait for the ordered extents to complete while
+ * for a fast fsync we wait just for writeback to complete, and then
+ * attach the ordered extents to the transaction so that a transaction
+ * commit waits for their completion, to avoid data loss if we fsync,
+ * the current transaction commits before the ordered extents complete
+ * and a power failure happens right after that.
*/
- ret = btrfs_wait_ordered_range(inode, start, (u64)end - (u64)start + 1);
- if (ret) {
- up_write(&BTRFS_I(inode)->dio_sem);
- inode_unlock(inode);
- goto out;
+ if (full_sync) {
+ ret = btrfs_wait_ordered_range(inode, start, len);
+ } else {
+ /*
+ * Get our ordered extents as soon as possible to avoid doing
+ * checksum lookups in the csum tree, and use instead the
+ * checksums attached to the ordered extents.
+ */
+ btrfs_get_ordered_extents_for_logging(BTRFS_I(inode),
+ &ctx.ordered_extents);
+ ret = filemap_fdatawait_range(inode->i_mapping, start, end);
}
+
+ if (ret)
+ goto out_release_extents;
+
atomic_inc(&root->log_batch);
+ /*
+ * If we are doing a fast fsync we can not bail out if the inode's
+ * last_trans is <= then the last committed transaction, because we only
+ * update the last_trans of the inode during ordered extent completion,
+ * and for a fast fsync we don't wait for that, we only wait for the
+ * writeback to complete.
+ */
smp_mb();
if (btrfs_inode_in_log(BTRFS_I(inode), fs_info->generation) ||
- BTRFS_I(inode)->last_trans <= fs_info->last_trans_committed) {
+ (BTRFS_I(inode)->last_trans <= fs_info->last_trans_committed &&
+ (full_sync || list_empty(&ctx.ordered_extents)))) {
/*
* We've had everything committed since the last time we were
* modified so clear this flag in case it was set for whatever
@@ -2223,9 +2242,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
* checked called fsync.
*/
ret = filemap_check_wb_err(inode->i_mapping, file->f_wb_err);
- up_write(&BTRFS_I(inode)->dio_sem);
- inode_unlock(inode);
- goto out;
+ goto out_release_extents;
}
/*
@@ -2242,12 +2259,11 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
- up_write(&BTRFS_I(inode)->dio_sem);
- inode_unlock(inode);
- goto out;
+ goto out_release_extents;
}
- ret = btrfs_log_dentry_safe(trans, dentry, start, end, &ctx);
+ ret = btrfs_log_dentry_safe(trans, dentry, &ctx);
+ btrfs_release_log_ctx_extents(&ctx);
if (ret < 0) {
/* Fallthrough and commit/free transaction. */
ret = 1;
@@ -2274,6 +2290,13 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
goto out;
}
}
+ if (!full_sync) {
+ ret = btrfs_wait_ordered_range(inode, start, len);
+ if (ret) {
+ btrfs_end_transaction(trans);
+ goto out;
+ }
+ }
ret = btrfs_commit_transaction(trans);
} else {
ret = btrfs_end_transaction(trans);
@@ -2284,6 +2307,12 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
if (!ret)
ret = err;
return ret > 0 ? -EIO : ret;
+
+out_release_extents:
+ btrfs_release_log_ctx_extents(&ctx);
+ up_write(&BTRFS_I(inode)->dio_sem);
+ inode_unlock(inode);
+ goto out;
}
static const struct vm_operations_struct btrfs_file_vm_ops = {