ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi
The Flexcom IP is part of the sama5d2 SoC. Move the flx3 node together
with its function definitions in sama5d2.dtsi. Boards will just fill
the pins and enable the desired functions.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200514050301.147442-4-tudor.ambarus@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index ee6f036..4351a8d 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -325,21 +325,8 @@ &flx3 {
status = "disabled";
uart8: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x400>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
- | AT91_XDMAC_DT_PERID(17))>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
- | AT91_XDMAC_DT_PERID(18))>;
- dma-names = "tx", "rx";
- clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
- clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
- atmel,fifo-size = <32>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 5f4a7c8..abbf14e2 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -179,26 +179,15 @@ flx3: flexcom@fc014000 {
status = "disabled";
uart8: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x200>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
- clock-names = "usart";
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
- atmel,fifo-size = <32>;
status = "disabled"; /* Conflict with isc. */
};
spi5: spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
- clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
- atmel,fifo-size = <16>;
status = "disabled"; /* Conflict with isc. */
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 7216a79..8a4336e 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -185,14 +185,8 @@ &flx3 { /* mikrobus1 spi */
status = "okay";
spi5: spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
- clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
- atmel,fifo-size = <16>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 5c31e40..5e84cde 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -804,6 +804,35 @@ flx3: flexcom@fc014000 {
#size-cells = <1>;
ranges = <0x0 0xfc014000 0x800>;
status = "disabled";
+
+ uart8: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "usart";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(17))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(18))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi5: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
};
flx4: flexcom@fc018000 {