ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
Convert mx23/mx28 dts files to use the padconfig defintions from
mxs-pinfunc.h.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 8b262a2..c3900e7 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -31,9 +31,9 @@
MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5
>;
- fsl,drive-strength = <1>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
};
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
@@ -58,9 +58,9 @@
MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
lcdif_pins_cfa10055: lcdif-evk@0 {
@@ -71,9 +71,9 @@
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
@@ -81,9 +81,9 @@
fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
};
};