pcmcia: sa1111: fix propagation of lowlevel board init return code
When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound
but was not functional due to no sockets being registered. This is
because the return code from the lowlevel board initialisation was not
being propagated out of the probe function. Fix this.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 1d78739..019c395 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -110,20 +110,14 @@
int pcmcia_neponset_init(struct sa1111_dev *sadev)
{
- int ret = -ENODEV;
-
- if (machine_is_assabet()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
- ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+ return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
}