drivers: thermal: Move various drivers for intel platforms into a subdir
This cleans up the directory a bit, now that we have several other
platforms using platform-specific sub-directories. Compile-tested with
ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5422523..772ab9d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -326,84 +326,6 @@
zone.
Compatible with the DA9062 and DA9061 PMICs.
-config INTEL_POWERCLAMP
- tristate "Intel PowerClamp idle injection driver"
- depends on THERMAL
- depends on X86
- depends on CPU_SUP_INTEL
- help
- Enable this to enable Intel PowerClamp idle injection driver. This
- enforce idle time which results in more package C-state residency. The
- user interface is exposed via generic thermal framework.
-
-config X86_PKG_TEMP_THERMAL
- tristate "X86 package temperature thermal driver"
- depends on X86_THERMAL_VECTOR
- select THERMAL_GOV_USER_SPACE
- select THERMAL_WRITABLE_TRIPS
- default m
- help
- Enable this to register CPU digital sensor for package temperature as
- thermal zone. Each package will have its own thermal zone. There are
- two trip points which can be set by user to get notifications via thermal
- notification methods.
-
-config INTEL_SOC_DTS_IOSF_CORE
- tristate
- depends on X86 && PCI
- select IOSF_MBI
- help
- This is becoming a common feature for Intel SoCs to expose the additional
- digital temperature sensors (DTSs) using side band interface (IOSF). This
- implements the common set of helper functions to register, get temperature
- and get/set thresholds on DTSs.
-
-config INTEL_SOC_DTS_THERMAL
- tristate "Intel SoCs DTS thermal driver"
- depends on X86 && PCI && ACPI
- select INTEL_SOC_DTS_IOSF_CORE
- select THERMAL_WRITABLE_TRIPS
- help
- Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
- temperature sensor (DTS). These SoCs have two additional DTSs in
- addition to DTSs on CPU cores. Each DTS will be registered as a
- thermal zone. There are two trip points. One of the trip point can
- be set by user mode programs to get notifications via Linux thermal
- notification methods.The other trip is a critical trip point, which
- was set by the driver based on the TJ MAX temperature.
-
-config INTEL_QUARK_DTS_THERMAL
- tristate "Intel Quark DTS thermal driver"
- depends on X86_INTEL_QUARK
- help
- Enable this to register Intel Quark SoC (e.g. X1000) platform digital
- temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
- The DTS will be registered as a thermal zone. There are two trip points:
- hot & critical. The critical trip point default value is set by
- underlying BIOS/Firmware.
-
-menu "ACPI INT340X thermal drivers"
-source drivers/thermal/int340x_thermal/Kconfig
-endmenu
-
-config INTEL_BXT_PMIC_THERMAL
- tristate "Intel Broxton PMIC thermal driver"
- depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
- help
- Select this driver for Intel Broxton PMIC with ADC channels monitoring
- system temperature measurements and alerts.
- This driver is used for monitoring the ADC channels of PMIC and handles
- the alert trip point interrupts and notifies the thermal framework with
- the trip point and temperature details of the zone.
-
-config INTEL_PCH_THERMAL
- tristate "Intel PCH Thermal Reporting Driver"
- depends on X86 && PCI
- help
- Enable this to support thermal reporting on certain intel PCHs.
- Thermal reporting device will provide temperature reading,
- programmable trip points and other information.
-
config MTK_THERMAL
tristate "Temperature sensor driver for mediatek SoCs"
depends on ARCH_MEDIATEK || COMPILE_TEST
@@ -415,6 +337,11 @@
Enable this option if you want to have support for thermal management
controller present in Mediatek SoCs
+menu "Intel thermal drivers"
+depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
+source "drivers/thermal/intel/Kconfig"
+endmenu
+
menu "Broadcom thermal drivers"
depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"