drm/i915: Make adjusted_mode.clock non-pixel multiplied
It would be easier if adjusted_mode.clock would be the pipe pixel clock,
and it actually is, except for the cases where pixel_multiplier > 1.
So let's change intel_sdvo to use port_clock as the multiplied clock,
and then we can leave adjusted_mode.clock as pipe pixel clock.
v2: Improve port_clock documentation
Rebased on top of SDVO pixel_multiplier fixes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 42b5fa1..f1b3d33 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4061,7 +4061,6 @@
link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
fdi_dotclock = adjusted_mode->clock;
- fdi_dotclock /= pipe_config->pixel_multiplier;
lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
pipe_config->pipe_bpp);
@@ -7370,8 +7369,7 @@
clock = ((u64)link_m * (u64)link_freq);
do_div(clock, link_n);
- pipe_config->adjusted_mode.clock = clock *
- pipe_config->pixel_multiplier;
+ pipe_config->adjusted_mode.clock = clock;
}
/** Returns the currently programmed mode of the given pipe. */
@@ -8316,7 +8314,8 @@
/* Set default port clock if not overwritten by the encoder. Needs to be
* done afterwards in case the encoder adjusts the mode. */
if (!pipe_config->port_clock)
- pipe_config->port_clock = pipe_config->adjusted_mode.clock;
+ pipe_config->port_clock = pipe_config->adjusted_mode.clock *
+ pipe_config->pixel_multiplier;
ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
if (ret < 0) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 76d2859..b6393e2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -212,6 +212,8 @@
unsigned long quirks;
struct drm_display_mode requested_mode;
+ /* Actual pipe timings ie. what we program into the pipe timing
+ * registers. adjusted_mode.clock is the pipe pixel clock. */
struct drm_display_mode adjusted_mode;
/* Whether to set up the PCH/FDI. Note that we never allow sharing
* between pch encoders and cpu encoders. */
@@ -266,7 +268,8 @@
/*
* Frequence the dpll for the port should run at. Differs from the
- * adjusted dotclock e.g. for DP or 12bpc hdmi mode.
+ * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
+ * already multiplied by pixel_multiplier.
*/
int port_clock;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9dc1697..393b7a5 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1059,7 +1059,7 @@
static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc_config *pipe_config)
{
- unsigned dotclock = pipe_config->adjusted_mode.clock;
+ unsigned dotclock = pipe_config->port_clock;
struct dpll *clock = &pipe_config->dpll;
/* SDVO TV has fixed PLL values depend on its clock range,
@@ -1124,7 +1124,6 @@
*/
pipe_config->pixel_multiplier =
intel_sdvo_get_pixel_multiplier(adjusted_mode);
- adjusted_mode->clock *= pipe_config->pixel_multiplier;
if (intel_sdvo->color_range_auto) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -1209,7 +1208,6 @@
return;
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
- input_dtd.part1.clock /= crtc->config.pixel_multiplier;
if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags;