via-velocity: remove private #define
Registers and their bits from mii.h. Courtesy from ed.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index ef4a0f6..c381911 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1240,86 +1240,16 @@
u32 pattern[8];
};
-
-/*
- * MII registers.
- */
-
-
/*
* Registers in the MII (offset unit is WORD)
*/
-#define MII_REG_BMCR 0x00 // physical address
-#define MII_REG_BMSR 0x01 //
-#define MII_REG_PHYID1 0x02 // OUI
-#define MII_REG_PHYID2 0x03 // OUI + Module ID + REV ID
-#define MII_REG_ANAR 0x04 //
-#define MII_REG_ANLPAR 0x05 //
-#define MII_REG_G1000CR 0x09 //
-#define MII_REG_G1000SR 0x0A //
-#define MII_REG_MODCFG 0x10 //
-#define MII_REG_TCSR 0x16 //
-#define MII_REG_PLED 0x1B //
-// NS, MYSON only
-#define MII_REG_PCR 0x17 //
-// ESI only
-#define MII_REG_PCSR 0x17 //
-#define MII_REG_AUXCR 0x1C //
-
// Marvell 88E1000/88E1000S
#define MII_REG_PSCR 0x10 // PHY specific control register
//
-// Bits in the BMCR register
+// Bits in the Silicon revision register
//
-#define BMCR_RESET 0x8000 //
-#define BMCR_LBK 0x4000 //
-#define BMCR_SPEED100 0x2000 //
-#define BMCR_AUTO 0x1000 //
-#define BMCR_PD 0x0800 //
-#define BMCR_ISO 0x0400 //
-#define BMCR_REAUTO 0x0200 //
-#define BMCR_FDX 0x0100 //
-#define BMCR_SPEED1G 0x0040 //
-//
-// Bits in the BMSR register
-//
-#define BMSR_AUTOCM 0x0020 //
-#define BMSR_LNK 0x0004 //
-
-//
-// Bits in the ANAR register
-//
-#define ANAR_ASMDIR 0x0800 // Asymmetric PAUSE support
-#define ANAR_PAUSE 0x0400 // Symmetric PAUSE Support
-#define ANAR_T4 0x0200 //
-#define ANAR_TXFD 0x0100 //
-#define ANAR_TX 0x0080 //
-#define ANAR_10FD 0x0040 //
-#define ANAR_10 0x0020 //
-//
-// Bits in the ANLPAR register
-//
-#define ANLPAR_ASMDIR 0x0800 // Asymmetric PAUSE support
-#define ANLPAR_PAUSE 0x0400 // Symmetric PAUSE Support
-#define ANLPAR_T4 0x0200 //
-#define ANLPAR_TXFD 0x0100 //
-#define ANLPAR_TX 0x0080 //
-#define ANLPAR_10FD 0x0040 //
-#define ANLPAR_10 0x0020 //
-
-//
-// Bits in the G1000CR register
-//
-#define G1000CR_1000FD 0x0200 // PHY is 1000-T Full-duplex capable
-#define G1000CR_1000 0x0100 // PHY is 1000-T Half-duplex capable
-
-//
-// Bits in the G1000SR register
-//
-#define G1000SR_1000FD 0x0800 // LP PHY is 1000-T Full-duplex capable
-#define G1000SR_1000 0x0400 // LP PHY is 1000-T Half-duplex capable
#define TCSR_ECHODIS 0x2000 //
#define AUXCR_MDPPS 0x0004 //
@@ -1338,7 +1268,6 @@
#define PHYID_REV_ID_MASK 0x0000000FUL
-#define PHYID_GET_PHY_REV_ID(i) ((i) & PHYID_REV_ID_MASK)
#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK)
#define MII_REG_BITS_ON(x,i,p) do {\
@@ -1362,8 +1291,8 @@
#define MII_GET_PHY_ID(p) ({\
u32 id;\
- velocity_mii_read((p),MII_REG_PHYID2,(u16 *) &id);\
- velocity_mii_read((p),MII_REG_PHYID1,((u16 *) &id)+1);\
+ velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
+ velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
(id);})
/*