ata: pata_it821x: convert printk() calls
Convert printk() calls to structured logging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0e22659..b77ef00 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -431,7 +431,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
case ATA_CMD_SET_FEATURES:
return ata_bmdma_qc_issue(qc);
}
- printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
+ ata_dev_dbg(qc->dev, "it821x: can't process command 0x%02X\n",
+ qc->tf.command);
return AC_ERR_DEV;
}
@@ -507,12 +508,14 @@ static void it821x_dev_config(struct ata_device *adev)
if (strstr(model_num, "Integrated Technology Express")) {
/* RAID mode */
- ata_dev_info(adev, "%sRAID%d volume",
- adev->id[147] ? "Bootable " : "",
- adev->id[129]);
- if (adev->id[129] != 1)
- pr_cont("(%dK stripe)", adev->id[146]);
- pr_cont("\n");
+ if (adev->id[129] == 1)
+ ata_dev_info(adev, "%sRAID%d volume\n",
+ adev->id[147] ? "Bootable " : "",
+ adev->id[129]);
+ else
+ ata_dev_info(adev, "%sRAID%d volume (%dK stripe)\n",
+ adev->id[147] ? "Bootable " : "",
+ adev->id[129], adev->id[146]);
}
/* This is a controller firmware triggered funny, don't
report the drive faulty! */
@@ -593,6 +596,7 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
/**
* it821x_display_disk - display disk setup
+ * @ap: ATA port
* @n: Device number
* @buf: Buffer block from firmware
*
@@ -600,7 +604,7 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
* by the firmware.
*/
-static void it821x_display_disk(int n, u8 *buf)
+static void it821x_display_disk(struct ata_port *ap, int n, u8 *buf)
{
unsigned char id[41];
int mode = 0;
@@ -633,13 +637,13 @@ static void it821x_display_disk(int n, u8 *buf)
else
strcpy(mbuf, "PIO");
if (buf[52] == 4)
- printk(KERN_INFO "%d: %-6s %-8s %s %s\n",
+ ata_port_info(ap, "%d: %-6s %-8s %s %s\n",
n, mbuf, types[buf[52]], id, cbl);
else
- printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
+ ata_port_info(ap, "%d: %-6s %-8s Volume: %1d %s %s\n",
n, mbuf, types[buf[52]], buf[53], id, cbl);
if (buf[125] < 100)
- printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
+ ata_port_info(ap, "%d: Rebuilding: %d%%\n", n, buf[125]);
}
/**
@@ -676,7 +680,7 @@ static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
status = ioread8(ap->ioaddr.status_addr);
if (status & ATA_ERR) {
kfree(buf);
- printk(KERN_ERR "it821x_firmware_command: rejected\n");
+ ata_port_err(ap, "%s: rejected\n", __func__);
return NULL;
}
if (status & ATA_DRQ) {
@@ -686,7 +690,7 @@ static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
usleep_range(500, 1000);
}
kfree(buf);
- printk(KERN_ERR "it821x_firmware_command: timeout\n");
+ ata_port_err(ap, "%s: timeout\n", __func__);
return NULL;
}
@@ -709,13 +713,13 @@ static void it821x_probe_firmware(struct ata_port *ap)
buf = it821x_firmware_command(ap, 0xFA, 512);
if (buf != NULL) {
- printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
+ ata_port_info(ap, "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
buf[505],
buf[506],
buf[507],
buf[508]);
for (i = 0; i < 4; i++)
- it821x_display_disk(i, buf + 128 * i);
+ it821x_display_disk(ap, i, buf + 128 * i);
kfree(buf);
}
}
@@ -771,7 +775,8 @@ static int it821x_port_start(struct ata_port *ap)
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)
- printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n");
+ dev_warn(&pdev->dev,
+ "Revision 0x10, workarounds activated.\n");
}
return 0;
@@ -919,14 +924,14 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
} else {
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
- printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+ dev_info(&pdev->dev, "forcing bypass mode.\n");
it821x_disable_raid(pdev);
}
pci_read_config_byte(pdev, 0x50, &conf);
conf &= 1;
- printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
- mode[conf]);
+ dev_info(&pdev->dev, "controller in %s mode.\n", mode[conf]);
+
if (conf == 0)
ppi[0] = &info_passthru;
else