[PATCH] declance: Use physical addresses at the interface level.
Use physical addresses at the interface level, letting drivers remap
them as appropriate.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/declance.c | 26 ++++++++++----------------
1 files changed, 10 insertions(+), 16 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index b47e3cf..f130bda 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -5,7 +5,7 @@
*
* adopted from sunlance.c by Richard van den Berg
*
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* additional sources:
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
@@ -57,13 +57,15 @@
#include <linux/string.h>
#include <asm/addrspace.h>
+#include <asm/system.h>
+
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
#include <asm/dec/machtype.h>
+#include <asm/dec/system.h>
#include <asm/dec/tc.h>
-#include <asm/system.h>
static char version[] __devinitdata =
"declance.c: v0.009 by Linux MIPS DECstation task force\n";
@@ -79,10 +81,6 @@
#define PMAD_LANCE 2
#define PMAX_LANCE 3
-#ifndef CONFIG_TC
-unsigned long system_base;
-unsigned long dmaptr;
-#endif
#define LE_CSR0 0
#define LE_CSR1 1
@@ -1027,10 +1025,6 @@
unsigned long esar_base;
unsigned char *esar;
-#ifndef CONFIG_TC
- system_base = KN01_LANCE_BASE;
-#endif
-
if (dec_lance_debug && version_printed++ == 0)
printk(version);
@@ -1063,7 +1057,7 @@
switch (type) {
#ifdef CONFIG_TC
case ASIC_LANCE:
- dev->base_addr = system_base + IOASIC_LANCE;
+ dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE);
/* buffer space for the on-board LANCE shared memory */
/*
@@ -1072,7 +1066,7 @@
dev->mem_start = CKSEG1ADDR(0x00020000);
dev->mem_end = dev->mem_start + 0x00020000;
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
- esar_base = system_base + IOASIC_ESAR;
+ esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR);
/* Workaround crash with booting KN04 2.1k from Disk */
memset((void *)dev->mem_start, 0,
@@ -1109,7 +1103,7 @@
case PMAD_LANCE:
claim_tc_card(slot);
- dev->mem_start = get_tc_base_addr(slot);
+ dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot));
dev->base_addr = dev->mem_start + 0x100000;
dev->irq = get_tc_irq_nr(slot);
esar_base = dev->mem_start + 0x1c0002;
@@ -1138,9 +1132,9 @@
case PMAX_LANCE:
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
- dev->base_addr = KN01_LANCE_BASE;
- dev->mem_start = KN01_LANCE_BASE + 0x01000000;
- esar_base = KN01_RTC_BASE + 1;
+ dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE);
+ dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM);
+ esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1);
lp->dma_irq = -1;
/*