ehci: workaround for pci quirk timeout on ExoPC
The BIOS handoff for the unused EHCI controller on the ExoPC tablet
hangs for 90 seconds on boot. Detect that device, skip negotiation
and force the handoff.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index e300509..f16c59d 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include "pci-quirks.h"
#include "xhci-ext-caps.h"
@@ -507,9 +508,20 @@
void __iomem *op_reg_base,
u32 cap, u8 offset)
{
- int msec, tried_handoff = 0;
+ int try_handoff = 1, tried_handoff = 0;
- if (cap & EHCI_USBLEGSUP_BIOS) {
+ /* The Pegatron Lucid (ExoPC) tablet sporadically waits for 90
+ * seconds trying the handoff on its unused controller. Skip
+ * it. */
+ if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
+ const char *dmi_bn = dmi_get_system_info(DMI_BOARD_NAME);
+ const char *dmi_bv = dmi_get_system_info(DMI_BIOS_VERSION);
+ if (dmi_bn && !strcmp(dmi_bn, "EXOPG06411") &&
+ dmi_bv && !strcmp(dmi_bv, "Lucid-CE-133"))
+ try_handoff = 0;
+ }
+
+ if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
#if 0
@@ -534,20 +546,23 @@
}
/* if boot firmware now owns EHCI, spin till it hands it over. */
- msec = 1000;
- while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
- tried_handoff = 1;
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, offset, &cap);
+ if (try_handoff) {
+ int msec = 1000;
+ while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+ tried_handoff = 1;
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, offset, &cap);
+ }
}
if (cap & EHCI_USBLEGSUP_BIOS) {
/* well, possibly buggy BIOS... try to shut it down,
* and hope nothing goes too wrong
*/
- dev_warn(&pdev->dev, "EHCI: BIOS handoff failed"
- " (BIOS bug?) %08x\n", cap);
+ if (try_handoff)
+ dev_warn(&pdev->dev, "EHCI: BIOS handoff failed"
+ " (BIOS bug?) %08x\n", cap);
pci_write_config_byte(pdev, offset + 2, 0);
}