net: phy: marvell: Use core genphy_soft_reset()
Rather than using an open coded equivalent, use the core
genphy_soft_reset() function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 6a5256c..33a5253 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -292,17 +292,11 @@ static int marvell_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
- int bmcr;
-
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
- bmcr = phy_read(phydev, MII_BMCR);
- if (bmcr < 0)
- return bmcr;
-
- err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@@ -318,8 +312,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -354,7 +347,7 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
@@ -370,17 +363,11 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
- int bmcr;
-
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
- bmcr = phy_read(phydev, MII_BMCR);
- if (bmcr < 0)
- return bmcr;
-
- err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@@ -493,7 +480,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
marvell_set_page(phydev, oldpage);
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -656,9 +643,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
int temp;
int err;
- temp = phy_read(phydev, MII_BMCR);
- temp |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, temp);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -689,14 +674,10 @@ static int m88e1116r_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- temp = phy_read(phydev, MII_BMCR);
- temp |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, temp);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
- mdelay(500);
-
return marvell_config_init(phydev);
}
@@ -804,14 +785,10 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
return err;
/* soft reset */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
- do
- temp = phy_read(phydev, MII_BMCR);
- while (temp & BMCR_RESET);
-
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
@@ -850,7 +827,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1121_config_init(struct phy_device *phydev)
@@ -912,7 +889,7 @@ static int m88e1118_config_aneg(struct phy_device *phydev)
{
int err;
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -961,7 +938,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1149_config_init(struct phy_device *phydev)
@@ -987,7 +964,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1145_config_init_rgmii(struct phy_device *phydev)