[POWERPC] 85xx: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 4538f3c..b025c56 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -1,7 +1,7 @@
/*
* MPC8555 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8555CDS";
@@ -31,11 +32,11 @@
PowerPC,8555@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -44,31 +45,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8555@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8555-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8555-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -76,8 +77,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,18 +87,18 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
@@ -107,9 +108,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -119,9 +120,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -130,9 +131,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -140,9 +141,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -151,7 +152,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -161,17 +162,17 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9000 1000>;
+ reg = <0x0 0x2000 0x9000 0x1000>;
};
};
@@ -179,16 +180,16 @@
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
@@ -196,68 +197,68 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
+ 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
+ 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
@@ -268,24 +269,24 @@
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};