diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b7d80bd..28b8ac4 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -40,12 +40,126 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include "msm_serial.h"
+#define UART_MR1			0x0000
 
-#define UARTDM_BURST_SIZE	16   /* in bytes */
-#define UARTDM_TX_AIGN(x)	((x) & ~0x3) /* valid for > 1p3 */
-#define UARTDM_TX_MAX		256   /* in bytes, valid for <= 1p3 */
-#define UARTDM_RX_SIZE		(UART_XMIT_SIZE / 4)
+#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
+#define UART_DM_MR1_AUTO_RFR_LEVEL1	0xFFFFFF00
+#define UART_MR1_RX_RDY_CTL		BIT(7)
+#define UART_MR1_CTS_CTL		BIT(6)
+
+#define UART_MR2			0x0004
+#define UART_MR2_ERROR_MODE		BIT(6)
+#define UART_MR2_BITS_PER_CHAR		0x30
+#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE	0x0
+#define UART_MR2_PARITY_MODE_ODD	0x1
+#define UART_MR2_PARITY_MODE_EVEN	0x2
+#define UART_MR2_PARITY_MODE_SPACE	0x3
+#define UART_MR2_PARITY_MODE		0x3
+
+#define UART_CSR			0x0008
+
+#define UART_TF				0x000C
+#define UARTDM_TF			0x0070
+
+#define UART_CR				0x0010
+#define UART_CR_CMD_NULL		(0 << 4)
+#define UART_CR_CMD_RESET_RX		(1 << 4)
+#define UART_CR_CMD_RESET_TX		(2 << 4)
+#define UART_CR_CMD_RESET_ERR		(3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
+#define UART_CR_CMD_START_BREAK		(5 << 4)
+#define UART_CR_CMD_STOP_BREAK		(6 << 4)
+#define UART_CR_CMD_RESET_CTS		(7 << 4)
+#define UART_CR_CMD_RESET_STALE_INT	(8 << 4)
+#define UART_CR_CMD_PACKET_MODE		(9 << 4)
+#define UART_CR_CMD_MODE_RESET		(12 << 4)
+#define UART_CR_CMD_SET_RFR		(13 << 4)
+#define UART_CR_CMD_RESET_RFR		(14 << 4)
+#define UART_CR_CMD_PROTECTION_EN	(16 << 4)
+#define UART_CR_CMD_STALE_EVENT_DISABLE	(6 << 8)
+#define UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
+#define UART_CR_CMD_FORCE_STALE		(4 << 8)
+#define UART_CR_CMD_RESET_TX_READY	(3 << 8)
+#define UART_CR_TX_DISABLE		BIT(3)
+#define UART_CR_TX_ENABLE		BIT(2)
+#define UART_CR_RX_DISABLE		BIT(1)
+#define UART_CR_RX_ENABLE		BIT(0)
+#define UART_CR_CMD_RESET_RXBREAK_START	((1 << 11) | (2 << 4))
+
+#define UART_IMR			0x0014
+#define UART_IMR_TXLEV			BIT(0)
+#define UART_IMR_RXSTALE		BIT(3)
+#define UART_IMR_RXLEV			BIT(4)
+#define UART_IMR_DELTA_CTS		BIT(5)
+#define UART_IMR_CURRENT_CTS		BIT(6)
+#define UART_IMR_RXBREAK_START		BIT(10)
+
+#define UART_IPR_RXSTALE_LAST		0x20
+#define UART_IPR_STALE_LSB		0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
+#define UART_DM_IPR_STALE_TIMEOUT_MSB	0xFFFFFF80
+
+#define UART_IPR			0x0018
+#define UART_TFWR			0x001C
+#define UART_RFWR			0x0020
+#define UART_HCR			0x0024
+
+#define UART_MREG			0x0028
+#define UART_NREG			0x002C
+#define UART_DREG			0x0030
+#define UART_MNDREG			0x0034
+#define UART_IRDA			0x0038
+#define UART_MISR_MODE			0x0040
+#define UART_MISR_RESET			0x0044
+#define UART_MISR_EXPORT		0x0048
+#define UART_MISR_VAL			0x004C
+#define UART_TEST_CTRL			0x0050
+
+#define UART_SR				0x0008
+#define UART_SR_HUNT_CHAR		BIT(7)
+#define UART_SR_RX_BREAK		BIT(6)
+#define UART_SR_PAR_FRAME_ERR		BIT(5)
+#define UART_SR_OVERRUN			BIT(4)
+#define UART_SR_TX_EMPTY		BIT(3)
+#define UART_SR_TX_READY		BIT(2)
+#define UART_SR_RX_FULL			BIT(1)
+#define UART_SR_RX_READY		BIT(0)
+
+#define UART_RF				0x000C
+#define UARTDM_RF			0x0070
+#define UART_MISR			0x0010
+#define UART_ISR			0x0014
+#define UART_ISR_TX_READY		BIT(7)
+
+#define UARTDM_RXFS			0x50
+#define UARTDM_RXFS_BUF_SHIFT		0x7
+#define UARTDM_RXFS_BUF_MASK		0x7
+
+#define UARTDM_DMEN			0x3C
+#define UARTDM_DMEN_RX_SC_ENABLE	BIT(5)
+#define UARTDM_DMEN_TX_SC_ENABLE	BIT(4)
+
+#define UARTDM_DMEN_TX_BAM_ENABLE	BIT(2)	/* UARTDM_1P4 */
+#define UARTDM_DMEN_TX_DM_ENABLE	BIT(0)	/* < UARTDM_1P4 */
+
+#define UARTDM_DMEN_RX_BAM_ENABLE	BIT(3)	/* UARTDM_1P4 */
+#define UARTDM_DMEN_RX_DM_ENABLE	BIT(1)	/* < UARTDM_1P4 */
+
+#define UARTDM_DMRX			0x34
+#define UARTDM_NCF_TX			0x40
+#define UARTDM_RX_TOTAL_SNAP		0x38
+
+#define UARTDM_BURST_SIZE		16   /* in bytes */
+#define UARTDM_TX_AIGN(x)		((x) & ~0x3) /* valid for > 1p3 */
+#define UARTDM_TX_MAX			256   /* in bytes, valid for <= 1p3 */
+#define UARTDM_RX_SIZE			(UART_XMIT_SIZE / 4)
 
 enum {
 	UARTDM_1P1 = 1,
@@ -78,6 +192,52 @@
 	struct msm_dma		rx_dma;
 };
 
+#define UART_TO_MSM(uart_port)	container_of(uart_port, struct msm_port, uart)
+
+static
+void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
+{
+	writel_relaxed(val, port->membase + off);
+}
+
+static
+unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return readl_relaxed(port->membase + off);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock.
+ */
+static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
+{
+	msm_write(port, 0x06, UART_MREG);
+	msm_write(port, 0xF1, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x1A, UART_MNDREG);
+	port->uartclk = 1843200;
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock divided by 4.
+ */
+static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
+{
+	msm_write(port, 0x18, UART_MREG);
+	msm_write(port, 0xF6, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x0A, UART_MNDREG);
+	port->uartclk = 1843200;
+}
+
+static void msm_serial_set_mnd_regs(struct uart_port *port)
+{
+	if (port->uartclk == 19200000)
+		msm_serial_set_mnd_regs_tcxo(port);
+	else if (port->uartclk == 4800000)
+		msm_serial_set_mnd_regs_tcxoby4(port);
+}
+
 static void msm_handle_tx(struct uart_port *port);
 static void msm_start_rx_dma(struct msm_port *msm_port);
 
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
deleted file mode 100644
index 1786458..0000000
--- a/drivers/tty/serial/msm_serial.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Robert Love <rlove@google.com>
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
-#define __DRIVERS_SERIAL_MSM_SERIAL_H
-
-#define UART_MR1			0x0000
-
-#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
-#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
-#define UART_DM_MR1_AUTO_RFR_LEVEL1	0xFFFFFF00
-#define UART_MR1_RX_RDY_CTL		BIT(7)
-#define UART_MR1_CTS_CTL		BIT(6)
-
-#define UART_MR2			0x0004
-#define UART_MR2_ERROR_MODE		BIT(6)
-#define UART_MR2_BITS_PER_CHAR		0x30
-#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
-#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
-#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
-#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
-#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
-#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
-#define UART_MR2_PARITY_MODE_NONE	0x0
-#define UART_MR2_PARITY_MODE_ODD	0x1
-#define UART_MR2_PARITY_MODE_EVEN	0x2
-#define UART_MR2_PARITY_MODE_SPACE	0x3
-#define UART_MR2_PARITY_MODE		0x3
-
-#define UART_CSR			0x0008
-
-#define UART_TF		0x000C
-#define UARTDM_TF	0x0070
-
-#define UART_CR				0x0010
-#define UART_CR_CMD_NULL		(0 << 4)
-#define UART_CR_CMD_RESET_RX		(1 << 4)
-#define UART_CR_CMD_RESET_TX		(2 << 4)
-#define UART_CR_CMD_RESET_ERR		(3 << 4)
-#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
-#define UART_CR_CMD_START_BREAK		(5 << 4)
-#define UART_CR_CMD_STOP_BREAK		(6 << 4)
-#define UART_CR_CMD_RESET_CTS		(7 << 4)
-#define UART_CR_CMD_RESET_STALE_INT	(8 << 4)
-#define UART_CR_CMD_PACKET_MODE		(9 << 4)
-#define UART_CR_CMD_MODE_RESET		(12 << 4)
-#define UART_CR_CMD_SET_RFR		(13 << 4)
-#define UART_CR_CMD_RESET_RFR		(14 << 4)
-#define UART_CR_CMD_PROTECTION_EN	(16 << 4)
-#define UART_CR_CMD_STALE_EVENT_DISABLE	(6 << 8)
-#define UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
-#define UART_CR_CMD_FORCE_STALE		(4 << 8)
-#define UART_CR_CMD_RESET_TX_READY	(3 << 8)
-#define UART_CR_TX_DISABLE		BIT(3)
-#define UART_CR_TX_ENABLE		BIT(2)
-#define UART_CR_RX_DISABLE		BIT(1)
-#define UART_CR_RX_ENABLE		BIT(0)
-#define UART_CR_CMD_RESET_RXBREAK_START	((1 << 11) | (2 << 4))
-
-#define UART_IMR		0x0014
-#define UART_IMR_TXLEV			BIT(0)
-#define UART_IMR_RXSTALE		BIT(3)
-#define UART_IMR_RXLEV			BIT(4)
-#define UART_IMR_DELTA_CTS		BIT(5)
-#define UART_IMR_CURRENT_CTS		BIT(6)
-#define UART_IMR_RXBREAK_START		BIT(10)
-
-#define UART_IPR_RXSTALE_LAST		0x20
-#define UART_IPR_STALE_LSB		0x1F
-#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
-#define UART_DM_IPR_STALE_TIMEOUT_MSB	0xFFFFFF80
-
-#define UART_IPR	0x0018
-#define UART_TFWR	0x001C
-#define UART_RFWR	0x0020
-#define UART_HCR	0x0024
-
-#define UART_MREG		0x0028
-#define UART_NREG		0x002C
-#define UART_DREG		0x0030
-#define UART_MNDREG		0x0034
-#define UART_IRDA		0x0038
-#define UART_MISR_MODE		0x0040
-#define UART_MISR_RESET		0x0044
-#define UART_MISR_EXPORT	0x0048
-#define UART_MISR_VAL		0x004C
-#define UART_TEST_CTRL		0x0050
-
-#define UART_SR			0x0008
-#define UART_SR_HUNT_CHAR	BIT(7)
-#define UART_SR_RX_BREAK	BIT(6)
-#define UART_SR_PAR_FRAME_ERR	BIT(5)
-#define UART_SR_OVERRUN		BIT(4)
-#define UART_SR_TX_EMPTY	BIT(3)
-#define UART_SR_TX_READY	BIT(2)
-#define UART_SR_RX_FULL		BIT(1)
-#define UART_SR_RX_READY	BIT(0)
-
-#define UART_RF			0x000C
-#define UARTDM_RF		0x0070
-#define UART_MISR		0x0010
-#define UART_ISR		0x0014
-#define UART_ISR_TX_READY	BIT(7)
-
-#define UARTDM_RXFS		0x50
-#define UARTDM_RXFS_BUF_SHIFT	0x7
-#define UARTDM_RXFS_BUF_MASK	0x7
-
-#define UARTDM_DMEN		0x3C
-#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
-#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
-
-#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2)	/* UARTDM_1P4 */
-#define UARTDM_DMEN_TX_DM_ENABLE  BIT(0)	/* < UARTDM_1P4 */
-
-#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3)	/* UARTDM_1P4 */
-#define UARTDM_DMEN_RX_DM_ENABLE  BIT(1)	/* < UARTDM_1P4 */
-
-#define UARTDM_DMRX		0x34
-#define UARTDM_NCF_TX		0x40
-#define UARTDM_RX_TOTAL_SNAP	0x38
-
-#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
-
-static inline
-void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
-{
-	writel_relaxed(val, port->membase + off);
-}
-
-static inline
-unsigned int msm_read(struct uart_port *port, unsigned int off)
-{
-	return readl_relaxed(port->membase + off);
-}
-
-/*
- * Setup the MND registers to use the TCXO clock.
- */
-static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
-{
-	msm_write(port, 0x06, UART_MREG);
-	msm_write(port, 0xF1, UART_NREG);
-	msm_write(port, 0x0F, UART_DREG);
-	msm_write(port, 0x1A, UART_MNDREG);
-	port->uartclk = 1843200;
-}
-
-/*
- * Setup the MND registers to use the TCXO clock divided by 4.
- */
-static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
-{
-	msm_write(port, 0x18, UART_MREG);
-	msm_write(port, 0xF6, UART_NREG);
-	msm_write(port, 0x0F, UART_DREG);
-	msm_write(port, 0x0A, UART_MNDREG);
-	port->uartclk = 1843200;
-}
-
-static inline
-void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port)
-{
-	if (port->uartclk == 19200000)
-		msm_serial_set_mnd_regs_tcxo(port);
-	else if (port->uartclk == 4800000)
-		msm_serial_set_mnd_regs_tcxoby4(port);
-}
-
-#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk
-
-#endif	/* __DRIVERS_SERIAL_MSM_SERIAL_H */