diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e971028..730dd0c 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1600,7 +1600,6 @@
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -1609,16 +1608,19 @@
 		return 0;
 
 	/* If the left PGA is enabled hit that VU bit... */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
-				     reg_cache[WM8962_HPOUTL_VOLUME]);
+	ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+	if (ret & WM8962_HPOUTL_PGA_ENA) {
+		snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+		return 1;
+	}
 
 	/* ...otherwise the right.  The VU is stereo. */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
-				     reg_cache[WM8962_HPOUTR_VOLUME]);
+	if (ret & WM8962_HPOUTR_PGA_ENA)
+		snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
 
-	return 0;
+	return 1;
 }
 
 /* The VU bits for the speakers are in a different register to the mute
@@ -3374,7 +3376,6 @@
 	int ret;
 	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
 	struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-	u16 *reg_cache = codec->reg_cache;
 	int i, trigger, irq_pol;
 	bool dmicclk, dmicdat;
 
@@ -3432,8 +3433,9 @@
 
 		/* Put the speakers into mono mode? */
 		if (pdata->spk_mono)
-			reg_cache[WM8962_CLASS_D_CONTROL_2]
-				|= WM8962_SPK_MONO;
+			snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+				WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
 
 		/* Micbias setup, detection enable and detection
 		 * threasholds. */