tty: serial: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 508063b..c049cfa 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1314,7 +1314,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ite887x_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ite887x_exit),
+ .exit = pci_ite887x_exit,
},
/*
* National Instruments
@@ -1326,7 +1326,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1335,7 +1335,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1344,7 +1344,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1353,7 +1353,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1362,7 +1362,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1371,7 +1371,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1380,7 +1380,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1389,7 +1389,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1398,7 +1398,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1407,7 +1407,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1416,7 +1416,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1425,7 +1425,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
+ .exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
@@ -1434,7 +1434,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_ni8430_init,
.setup = pci_ni8430_setup,
- .exit = __devexit_p(pci_ni8430_exit),
+ .exit = pci_ni8430_exit,
},
/*
* Panacom
@@ -1446,7 +1446,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PANACOM,
@@ -1455,7 +1455,7 @@
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
/*
* PLX
@@ -1474,7 +1474,7 @@
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1483,7 +1483,7 @@
.subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1492,7 +1492,7 @@
.subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
@@ -1501,7 +1501,7 @@
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
.init = pci_plx9050_init,
.setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
+ .exit = pci_plx9050_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
@@ -1513,7 +1513,7 @@
.subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 422
@@ -1525,7 +1525,7 @@
.subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 232
@@ -1537,7 +1537,7 @@
.subdevice = PCI_SUBDEVICE_ID_POCTAL232,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 422
@@ -1549,7 +1549,7 @@
.subdevice = PCI_SUBDEVICE_ID_POCTAL422,
.init = sbs_init,
.setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
+ .exit = sbs_exit,
},
/*
* SIIG cards - these may be called via parport_serial
@@ -4323,7 +4323,7 @@
static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
- .remove = __devexit_p(pciserial_remove_one),
+ .remove = pciserial_remove_one,
#ifdef CONFIG_PM
.suspend = pciserial_suspend_one,
.resume = pciserial_resume_one,