drm/i915: Adding dbuf support for skl nv12 format.
Skylake nv12 format requires dbuf (aka. ddb) calculations
and programming for each of y and uv sub-planes. Made minor
changes to reuse current dbuf calculations and programming
for uv plane. i.e., with this change, existing computation
is used for either packed format or uv portion of nv12
depending on incoming format. Added new code for dbuf
computation and programming for y plane.
This patch is a pre-requisite for adding NV12 format support.
Actual nv12 support is coming in later patches.
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7006f94..af26060 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2639,8 +2639,18 @@
}
static unsigned int
-skl_plane_relative_data_rate(const struct intel_plane_wm_parameters *p)
+skl_plane_relative_data_rate(const struct intel_plane_wm_parameters *p, int y)
{
+
+ /* for planar format */
+ if (p->y_bytes_per_pixel) {
+ if (y) /* y-plane data rate */
+ return p->horiz_pixels * p->vert_pixels * p->y_bytes_per_pixel;
+ else /* uv-plane data rate */
+ return (p->horiz_pixels/2) * (p->vert_pixels/2) * p->bytes_per_pixel;
+ }
+
+ /* for packed formats */
return p->horiz_pixels * p->vert_pixels * p->bytes_per_pixel;
}
@@ -2663,7 +2673,10 @@
if (!p->enabled)
continue;
- total_data_rate += skl_plane_relative_data_rate(p);
+ total_data_rate += skl_plane_relative_data_rate(p, 0); /* packed/uv */
+ if (p->y_bytes_per_pixel) {
+ total_data_rate += skl_plane_relative_data_rate(p, 1); /* y-plane */
+ }
}
return total_data_rate;
@@ -2682,6 +2695,7 @@
struct skl_ddb_entry *alloc = &ddb->pipe[pipe];
uint16_t alloc_size, start, cursor_blocks;
uint16_t minimum[I915_MAX_PLANES];
+ uint16_t y_minimum[I915_MAX_PLANES];
unsigned int total_data_rate;
int plane;
@@ -2710,6 +2724,8 @@
minimum[plane] = 8;
alloc_size -= minimum[plane];
+ y_minimum[plane] = p->y_bytes_per_pixel ? 8 : 0;
+ alloc_size -= y_minimum[plane];
}
/*
@@ -2723,16 +2739,17 @@
start = alloc->start;
for (plane = 0; plane < intel_num_planes(intel_crtc); plane++) {
const struct intel_plane_wm_parameters *p;
- unsigned int data_rate;
- uint16_t plane_blocks;
+ unsigned int data_rate, y_data_rate;
+ uint16_t plane_blocks, y_plane_blocks = 0;
p = ¶ms->plane[plane];
if (!p->enabled)
continue;
- data_rate = skl_plane_relative_data_rate(p);
+ data_rate = skl_plane_relative_data_rate(p, 0);
/*
+ * allocation for (packed formats) or (uv-plane part of planar format):
* promote the expression to 64 bits to avoid overflowing, the
* result is < available as data_rate / total_data_rate < 1
*/
@@ -2744,6 +2761,22 @@
ddb->plane[pipe][plane].end = start + plane_blocks;
start += plane_blocks;
+
+ /*
+ * allocation for y_plane part of planar format:
+ */
+ if (p->y_bytes_per_pixel) {
+ y_data_rate = skl_plane_relative_data_rate(p, 1);
+ y_plane_blocks = y_minimum[plane];
+ y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate,
+ total_data_rate);
+
+ ddb->y_plane[pipe][plane].start = start;
+ ddb->y_plane[pipe][plane].end = start + y_plane_blocks;
+
+ start += y_plane_blocks;
+ }
+
}
}
@@ -2856,13 +2889,18 @@
p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
fb = crtc->primary->state->fb;
+ /* For planar: Bpp is for uv plane, y_Bpp is for y plane */
if (fb) {
p->plane[0].enabled = true;
- p->plane[0].bytes_per_pixel = fb->bits_per_pixel / 8;
+ p->plane[0].bytes_per_pixel = fb->pixel_format == DRM_FORMAT_NV12 ?
+ drm_format_plane_cpp(fb->pixel_format, 1) : fb->bits_per_pixel / 8;
+ p->plane[0].y_bytes_per_pixel = fb->pixel_format == DRM_FORMAT_NV12 ?
+ drm_format_plane_cpp(fb->pixel_format, 0) : 0;
p->plane[0].tiling = fb->modifier[0];
} else {
p->plane[0].enabled = false;
p->plane[0].bytes_per_pixel = 0;
+ p->plane[0].y_bytes_per_pixel = 0;
p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
}
p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
@@ -2870,6 +2908,7 @@
p->plane[0].rotation = crtc->primary->state->rotation;
fb = crtc->cursor->state->fb;
+ p->cursor.y_bytes_per_pixel = 0;
if (fb) {
p->cursor.enabled = true;
p->cursor.bytes_per_pixel = fb->bits_per_pixel / 8;
@@ -2905,22 +2944,25 @@
uint32_t plane_bytes_per_line, plane_blocks_per_line;
uint32_t res_blocks, res_lines;
uint32_t selected_result;
+ uint8_t bytes_per_pixel;
if (latency == 0 || !p->active || !p_params->enabled)
return false;
+ bytes_per_pixel = p_params->y_bytes_per_pixel ?
+ p_params->y_bytes_per_pixel :
+ p_params->bytes_per_pixel;
method1 = skl_wm_method1(p->pixel_rate,
- p_params->bytes_per_pixel,
+ bytes_per_pixel,
latency);
method2 = skl_wm_method2(p->pixel_rate,
p->pipe_htotal,
p_params->horiz_pixels,
- p_params->bytes_per_pixel,
+ bytes_per_pixel,
p_params->tiling,
latency);
- plane_bytes_per_line = p_params->horiz_pixels *
- p_params->bytes_per_pixel;
+ plane_bytes_per_line = p_params->horiz_pixels * bytes_per_pixel;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
if (p_params->tiling == I915_FORMAT_MOD_Y_TILED ||
@@ -3137,10 +3179,14 @@
new->plane_trans[pipe][i]);
I915_WRITE(CUR_WM_TRANS(pipe), new->cursor_trans[pipe]);
- for (i = 0; i < intel_num_planes(crtc); i++)
+ for (i = 0; i < intel_num_planes(crtc); i++) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, i),
&new->ddb.plane[pipe][i]);
+ skl_ddb_entry_write(dev_priv,
+ PLANE_NV12_BUF_CFG(pipe, i),
+ &new->ddb.y_plane[pipe][i]);
+ }
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
&new->ddb.cursor[pipe]);
@@ -3298,6 +3344,7 @@
return false;
intel_crtc->wm.skl_active = *pipe_wm;
+
return true;
}
@@ -3391,8 +3438,16 @@
intel_plane->wm.scaled = scaled;
intel_plane->wm.horiz_pixels = sprite_width;
intel_plane->wm.vert_pixels = sprite_height;
- intel_plane->wm.bytes_per_pixel = pixel_size;
intel_plane->wm.tiling = DRM_FORMAT_MOD_NONE;
+
+ /* For planar: Bpp is for UV plane, y_Bpp is for Y plane */
+ intel_plane->wm.bytes_per_pixel =
+ (fb && fb->pixel_format == DRM_FORMAT_NV12) ?
+ drm_format_plane_cpp(plane->state->fb->pixel_format, 1) : pixel_size;
+ intel_plane->wm.y_bytes_per_pixel =
+ (fb && fb->pixel_format == DRM_FORMAT_NV12) ?
+ drm_format_plane_cpp(plane->state->fb->pixel_format, 0) : 0;
+
/*
* Framebuffer can be NULL on plane disable, but it does not
* matter for watermarks if we assume no tiling in that case.