thermal: imx8mm: Add i.MX8MP support
i.MX8MP shares same TMU with i.MX8MM, the only difference is i.MX8MP
has two thermal sensors while i.MX8MM ONLY has one, add multiple sensors
support for i.MX8MM TMU driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1584674791-9717-2-git-send-email-Anson.Huang@nxp.com
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index d597ceb..c32308b 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -5,59 +5,143 @@
* Author: Anson Huang <Anson.Huang@nxp.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#define TER 0x0 /* TMU enable */
+#define TPS 0x4
#define TRITSR 0x20 /* TMU immediate temp */
#define TER_EN BIT(31)
-#define TRITSR_VAL_MASK 0xff
+#define TRITSR_TEMP0_VAL_MASK 0xff
+#define TRITSR_TEMP1_VAL_MASK 0xff0000
-#define TEMP_LOW_LIMIT 10
+#define PROBE_SEL_ALL GENMASK(31, 30)
+
+#define probe_status_offset(x) (30 + x)
+#define SIGN_BIT BIT(7)
+#define TEMP_VAL_MASK GENMASK(6, 0)
+
+#define VER1_TEMP_LOW_LIMIT 10000
+#define VER2_TEMP_LOW_LIMIT -40000
+#define VER2_TEMP_HIGH_LIMIT 125000
+
+#define TMU_VER1 0x1
+#define TMU_VER2 0x2
+
+struct thermal_soc_data {
+ u32 num_sensors;
+ u32 version;
+ int (*get_temp)(void *, int *);
+};
+
+struct tmu_sensor {
+ struct imx8mm_tmu *priv;
+ u32 hw_id;
+ struct thermal_zone_device *tzd;
+};
struct imx8mm_tmu {
- struct thermal_zone_device *tzd;
void __iomem *base;
struct clk *clk;
+ const struct thermal_soc_data *socdata;
+ struct tmu_sensor sensors[0];
};
+static int imx8mm_tmu_get_temp(void *data, int *temp)
+{
+ struct tmu_sensor *sensor = data;
+ struct imx8mm_tmu *tmu = sensor->priv;
+ u32 val;
+
+ val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
+ *temp = val * 1000;
+ if (*temp < VER1_TEMP_LOW_LIMIT)
+ return -EAGAIN;
+
+ return 0;
+}
+
+static int imx8mp_tmu_get_temp(void *data, int *temp)
+{
+ struct tmu_sensor *sensor = data;
+ struct imx8mm_tmu *tmu = sensor->priv;
+ bool ready;
+ u32 val;
+
+ ready = test_bit(probe_status_offset(sensor->hw_id),
+ tmu->base + TRITSR);
+ if (!ready)
+ return -EAGAIN;
+
+ val = readl_relaxed(tmu->base + TRITSR);
+ val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
+ FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
+ if (val & SIGN_BIT) /* negative */
+ val = (~(val & TEMP_VAL_MASK) + 1);
+
+ *temp = val * 1000;
+ if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
+ return -EAGAIN;
+
+ return 0;
+}
+
static int tmu_get_temp(void *data, int *temp)
{
- struct imx8mm_tmu *tmu = data;
- u32 val;
+ struct tmu_sensor *sensor = data;
+ struct imx8mm_tmu *tmu = sensor->priv;
- val = readl_relaxed(tmu->base + TRITSR) & TRITSR_VAL_MASK;
- if (val < TEMP_LOW_LIMIT)
- return -EAGAIN;
-
- *temp = val * 1000;
-
- return 0;
+ return tmu->socdata->get_temp(data, temp);
}
static struct thermal_zone_of_device_ops tmu_tz_ops = {
.get_temp = tmu_get_temp,
};
+static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
+{
+ u32 val;
+
+ val = readl_relaxed(tmu->base + TER);
+ val = enable ? (val | TER_EN) : (val & ~TER_EN);
+ writel_relaxed(val, tmu->base + TER);
+}
+
+static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
+{
+ u32 val;
+
+ val = readl_relaxed(tmu->base + TPS);
+ val |= PROBE_SEL_ALL;
+ writel_relaxed(val, tmu->base + TPS);
+}
+
static int imx8mm_tmu_probe(struct platform_device *pdev)
{
+ const struct thermal_soc_data *data;
struct imx8mm_tmu *tmu;
- u32 val;
int ret;
+ int i;
- tmu = devm_kzalloc(&pdev->dev, sizeof(struct imx8mm_tmu), GFP_KERNEL);
+ data = of_device_get_match_data(&pdev->dev);
+
+ tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors,
+ data->num_sensors), GFP_KERNEL);
if (!tmu)
return -ENOMEM;
+ tmu->socdata = data;
+
tmu->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(tmu->base))
return PTR_ERR(tmu->base);
@@ -77,20 +161,32 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
return ret;
}
- tmu->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
- tmu, &tmu_tz_ops);
- if (IS_ERR(tmu->tzd)) {
- dev_err(&pdev->dev,
- "failed to register thermal zone sensor: %d\n", ret);
- return PTR_ERR(tmu->tzd);
+ /* disable the monitor during initialization */
+ imx8mm_tmu_enable(tmu, false);
+
+ for (i = 0; i < data->num_sensors; i++) {
+ tmu->sensors[i].priv = tmu;
+ tmu->sensors[i].tzd =
+ devm_thermal_zone_of_sensor_register(&pdev->dev, i,
+ &tmu->sensors[i],
+ &tmu_tz_ops);
+ if (IS_ERR(tmu->sensors[i].tzd)) {
+ dev_err(&pdev->dev,
+ "failed to register thermal zone sensor[%d]: %d\n",
+ i, ret);
+ return PTR_ERR(tmu->sensors[i].tzd);
+ }
+ tmu->sensors[i].hw_id = i;
}
platform_set_drvdata(pdev, tmu);
+ /* enable all the probes for V2 TMU */
+ if (tmu->socdata->version == TMU_VER2)
+ imx8mm_tmu_probe_sel_all(tmu);
+
/* enable the monitor */
- val = readl_relaxed(tmu->base + TER);
- val |= TER_EN;
- writel_relaxed(val, tmu->base + TER);
+ imx8mm_tmu_enable(tmu, true);
return 0;
}
@@ -98,12 +194,9 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
static int imx8mm_tmu_remove(struct platform_device *pdev)
{
struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
- u32 val;
/* disable TMU */
- val = readl_relaxed(tmu->base + TER);
- val &= ~TER_EN;
- writel_relaxed(val, tmu->base + TER);
+ imx8mm_tmu_enable(tmu, false);
clk_disable_unprepare(tmu->clk);
platform_set_drvdata(pdev, NULL);
@@ -111,8 +204,21 @@ static int imx8mm_tmu_remove(struct platform_device *pdev)
return 0;
}
+static struct thermal_soc_data imx8mm_tmu_data = {
+ .num_sensors = 1,
+ .version = TMU_VER1,
+ .get_temp = imx8mm_tmu_get_temp,
+};
+
+static struct thermal_soc_data imx8mp_tmu_data = {
+ .num_sensors = 2,
+ .version = TMU_VER2,
+ .get_temp = imx8mp_tmu_get_temp,
+};
+
static const struct of_device_id imx8mm_tmu_table[] = {
- { .compatible = "fsl,imx8mm-tmu", },
+ { .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, },
+ { .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
{ },
};